r/pcmods • u/Albert_1108 • 48m ago
Case YGT N195 Case with an rx 580
r/pcmods • u/Ok_Constant_221 • 1h ago
Hello Everyone
Recently I have modded the bios for Lenovo ThinkCenter M810z ( chipset B250 ) with CoffeeTime 0.99.
Could anyone tell me if I have modded the bios correctly ( General page of CoffeeTime is in the attachment and extra page is below ) to install i7-9700 and which pins on the cpu should I isolate / short for this computer?
Thanks!
Coffee time Extra Tab Settings:
I’ve unlocked 128gb ram support, disabled SPD Write Protection, and Applied HEX to DEC CPU count patch
r/pcmods • u/Beginning-Bet-6894 • 14h ago
This build is meant to come with me when I travel for work. I’m trying to balance having a desktop I enjoy using, with something practical to move around.
I’m happy with the black case and subtle lighting, but I’d like some feedback on the practical side. The GPU takes up a fair bit of space, and there’s a TRYX HOLO in here too. Protecting everything during transport is definitely something I want to get right.
Would you change anything about the design or parts for a PC that gets moved regularly? Especially interested in GPU support, protecting the side panel, and carrying case setups that have worked for you.
r/pcmods • u/Nervous_Broccoli_747 • 16h ago
So is it possible to turn this whole thing into a Windows computer and can it be upgradable like I can upgrade the like I can upgrade the CPU fans ram and it can be like in the middle there will be like a glass that you can open it and see everything and LED lights inside is it possible or is it possible if it just be a PC
r/pcmods • u/FungiBobby • 19h ago
Anyone in the GTA (or Canada even) with access to a 3D printer willing to print the official vertical GPU mount Corsair offers on Printables. Better yet has anyone done so and how was your experience? I know I can reach out to places that do this but they have no idea what I’m asking them to make and one or two items isn’t their cup of tea apparently.
Any suggestions or recommendations are appreciated.
Note: I have the Cooler Master VGPU mount kit but it didn’t work out so well for me. Great mount, just not on this case. Was excellent in my Meshify 2.
r/pcmods • u/Object-195 • 22h ago
Part of the goal of making this was to not impact the aesthetics of the case which I figured out Laptop optical drives barely fit between the gaps of the front grill. Also laptop drives physically hold onto the disc which enables using them in a sideways position. Which lets them rest alongside the fans, and not in the way.
The mount I built entirely myself, designed for a 16mm gap at its most narrow, it uses friction to hold the drives in place because I want it to be flexible in taking 12.7mm and 9.5mm drives.
The drives I have installed right now is a Blu-ray ROM LG CT40N and a Blu-ray Pioneer BDR-UD03FAL. The CT40N lacks its faceplate at the moment.
The last two pictures are from earlier in development so there will be differences.
r/pcmods • u/internet_observer • 1d ago
Did you use a 3d printed bracket, a metal fabricated bracket or a modified existing PCI bracket?
How was the structural integrity? Did you do anything to support the other side of the card, if so what did you anchor to?
Any particular pitfalls you ran into?
The 120mm fan area at the back of my case (Lian Li O11D Mini V2) would be the perfect area for vertical GPU mount without losing access to the other PCIE slots. Really would be a great area spot for a GPU on most ATX cases for anyone who watercools and doesn't want to lose access to their other PCI slots.
Trying to figure out the best way of going about it.
r/pcmods • u/AndroidArmor • 1d ago
HI good day guys, I am busy with a pc build that is kinda insane got all or most of the parts in and the pc boot up. This is actually what i am busy with, pictures will come when the build is done
1- i got a amd build with glass case, Have not added gpu yet.
2- took an old tablet tab 2 and synced with the windows system to be a second monitor, its glued to the glass part of the case and using usb debugging via wifi/ usb cable with scrncpy.
3-Took an old s20 apart and build it bottom half of the case, Its running samsung dex and the hdmi is also connected.
4-The front of the case glass has a lenovo phablet also connected via usb to display the full windows pc desktop, the problem i got..lol is that its behind the glass so i cannot really touch the screen.
I would love this to display the cpu the task manager or an android app that sync this,i have yet to figure out how to do this, maybe via bluetooth
SO when i am done i will post pictures, its unique as it got samsung dex build in and android and windows.
I had to get rid of the fans to display the screens .What suggestions is there to manage all the display inside the case.
I have still got to 3d print the holders for the screens so they look professional.
At the moment this pc can run dex and windows at the same time on dual monitors,Just need to sync a way for the mouse to work on both systems, so one can actually play mobile games in hi rez and run windows games or linux on the other monitor....insane right
r/pcmods • u/Antique-Classroom-82 • 1d ago
Hi,
I've seen some videos with this mod. Some companies do it on purpose with plexi in front, but this is a lian li fan so it was done manually. Any thoughts on how and which fan?
Thanks
r/pcmods • u/DragonWarriorMH • 2d ago
I got a question
Did anyone here’s PC got affected by downloading a lot of mods on their PCs like windows damage or other stuff?
r/pcmods • u/TuneNo3424 • 2d ago
Hola tengo un problema con mi refrigeración liquida mi PC alcanza 83°C solo en el menu de fornite y mi refrigeración liquida creo que no está funcionando bien me comenzó a dar problemas cuando instale el programa corsair icue lo instale y la refrigeración liquida comenzó a fallar antes de histalar el programa la temperatura se mantenía máximo 76°C y en el menu en 45°C ahora la temperatura se eleva mucho cuando estaba caliente la refrigeración se colocaba en rojo y comenzaba a disipar el calor bien ahora no se coloca en rojo y la temperatura aumenta mucho alguien me podría ayudar a colocar como estaba antes mi refrigeración liquida es una corsair H100i v2
r/pcmods • u/UnCapoLlamadoAxaim • 2d ago
First I saw that both of them have pretty similar design so I thought maybe it would be possible to exchange them.

Then I saw the difference between the PCBs and the heatsink so most probably it is not possible.

Then I remembered this video I saw a while ago and I thought, couldn't I just cut the heatsink until it covers only the PCB and print a smaller dual fan chasis?

My question is how would it affect the temperatures of the graphics card and if it they could still be enough to cool it. Has anybody tried this yet? All this is hypothetical I do not own any of these graphics card but I have planned to buy the RX 9070 Reaper (still cant decide which model) in the future. All the objective is to make the RX 9070 Reaper smaller without sacrificing temperatures or performance (or not too much).
Hey all, i just managed to pick up a fractal design mood case for $20 but it was missing the fan bracket and HDD bracket, both of which i was intending to use. I have a Bambu Labs P1s and was planning to print out replacement parts as i cannot seem to find any spare parts for sale, and fractal doesn't sell parts individually unless i have the receipt (at least I'm mostly certain they don't)
Does anyone by chance have a 3D scanner and a fractal mood case that would be willing to scan both of the brackets?
Does anyone have these parts for a fractal design mood for sale? Id be willing to buy them too
Thanks!
r/pcmods • u/According_Fudge_9187 • 5d ago
Adicionei um termômetro em minha ddr4 para mensurar uma queda térmica.
Pode parecer pouco, porém a queda térmica de 11° sob uma temperatura de 47 é bem relevante quando você parte da temperatura em idle de 31°.
Resumindo, utilizando o occt e o Furmark simultaneamente, consegui chegar aos 47°, após iniciar a refrigeração a temperatura estabilizou em 36°.
Obs; queda de temperatura da GPU em 15°/ SSD com dissipador argb queda de 5°.
r/pcmods • u/DirtyLittleCkrit • 6d ago
Ive been slowly adding more details to this build and I think the purple/anime theme is finally starting to come together.
I wanted the inside of the case to feel more like a display space instead of just a PC, so I added a few character figures to be displayed under the purple light theme.
The part I’ve been having the most fun with is the screens. I’m using the TRYX HOLO AIO display for one of the animations, plus a couple of extra screens for system info and matching artwork. Having the same character/theme spread across different parts of the case makes the whole thing feel a lot more connected.
I’m still thinking it needs one more custom detail though.
Maybe a small illuminated sign, some custom panel work, or another tiny display somewhere?
r/pcmods • u/antenna-ape • 6d ago
r/pcmods • u/Minimum-Part-6101 • 7d ago
My first PC build, and I think I did a pretty good job with the layout and airflow using the Arctic P12 Max fans. I'm getting really good temperatures while gaming at 1080p Ultra: around 60°C on the GPU and 68°C on the CPU.
I wanted to share the idea of adding a side-mounted fan in case anyone wants to try it. It makes a huge difference!
I positioned the PSU like you can see in the second-to-last picture because the case didn't really allow me to mount it in the ideal orientation. However, it fits perfectly, literally down to the millimeter, right next to the RAM sticks.
To mount the side fan, I bought some right-angle brackets from AliExpress. I'll leave the link below. Using flat-head screws and washers, I managed to space the fan away from the side panel just enough to allow it to close, as you can see in the last picture.
PC Specs:
Side fan mounting brackets: Right-angle brackets – AliExpress
r/pcmods • u/Classic_Cry3163 • 7d ago
Also upgraded the ram the gpu is next on the board