r/pools • • Aug 10 '26

Pool Help & Questions Pool Robot Megathread

10 Upvotes

We get TONS of items about pool robots.

In an effort to control the absolute mayhem around them, and most importantly: Prevent companies from using it as a tool to spam you, we're consolidating things to a regular thread.

SO: Post your pool robot recommendations/quesitons/etc here.

Look for responses.


r/pools • • 3h ago

Got sick of looking at crappy job by pool plumber a month back so I re-plumbed my pad. Looking forward to criticism :)

Post image
14 Upvotes

I've been just angry about the job the pool plumber did a month back. Yes, everything functioned but it went over the allotted space I need the equipment in (he claimed it is not possible) and just looked weirdly spaced out. Took me 2x12 hour days to redo (granted half of that time was just staring at the equipment to figure out wtf needs to be done to get this compacted. I still have no idea why he divided the spa suction and pool suction like he did.

  1. Combined spa and pool suction instead of creating that ring around the planter. Added a gasket union to make future repairs easy and not have to cut more pipe down.

  2. Removed the stupid check valve in front of the pump. He told me this CV is necessary but I did a test with the flapper inside removed and vacuum held pressure + I would rather know if I have a leak that breaks vacuum).

  3. Turned filter so that inlet and outlet face north/south to create space on left and right side so to compact further.

  4. Changed nipple on Jandy heater's gas line from to get another 4" inches of space. The exhaust still sits 7" inches from the wall so I think it's okay.

  5. Replaced almost all 90 elbows elbows needed for the sections replaced with sweep elbows and still left a good 8" inches of straight pipe entering the pump.

Would love to know if I botched anything here and if he had good reason for the suction plumbing running around the planter. He also put a check valve connecting the pool and spa returns. I assume this is to get a little circulation to the spa since it is raised.


r/pools • • 2h ago

What's the discoloration? Mainly 90% sides of pool and not the bottom so much

Thumbnail
gallery
2 Upvotes

It does not scrub off, and a chlorine pill held against it does not help, I am thinking fading, but it's weird as it seems to get darker not lighter for fading, so then I think some sort of algae but I can't get it to budge at all.


r/pools • • 3h ago

Automated Chemical sensing

2 Upvotes

I was just talking with a spa guy and the discussion revolved around Pentair's automated system of testing chemicals and dispensing. There was also another brand he mentioned. I don't have any model numbers.

This guy felt the challenge with these systems is they aren't quite there yet and calibration can be an issue, and...if you are away for a while you could end up with an issue.

I know nothing about this and am seeking inputs from those who are familiar.

Thanks.


r/pools • • 1h ago

Thoughts on SunSmart Stabilizer?

• Upvotes

While it's pretty much too late in the season for me to give this a try, I'm curious if anyone has any thoughts on this non-CYA stabilizer? Titanium dioxide is mentioned in the article. I presume that this is the same as the titanium dioxide that we use as a white pigment in white gel coat (fiberglass) manufacturing?

https://lesliespool.com/blog/introducing-sunsmart-stabilizer.html?utm_medium=email&utm_source=cordial&utm_campaign=2707-PROMO-WED-111826&src=MDWK2707


r/pools • • 1d ago

Building a pool n backyard near Toronto

Post image
51 Upvotes

We're in Kleinburg near Toronto, lot's pretty big, roughly half an acre, slight slope towards the back. Want a concrete pool, integrated hot tub, outdoor kitchen, lighting and a covered seating area with a fireplace (idk tried my best to find how I see it in my head).

Budget's around $300-350k CAD, could stretch a bit. Not interested in something that'll fall apart after three Ontario winters so its good if potential contractor will have warranties.

Biggest concerns RN are drainage, long-term maintenance and getting the whole thing done properly without juggling 3+ different companies (I want turnkey solution for all mentioned above if its possible). Would you guys hire one company for the entire project or separate pool builder and landscaper? Also curious what you'd not cheap out on and some local recs


r/pools • • 4h ago

Leak from top pipe connection

Post image
1 Upvotes

Hey everyone. I noticed this morning a small leak in the housing on the top pipe of my pump. I am trying to assess if it’s worth it to just replace the whole pump or if this can be patched at all. This is an old pump, Hayward SP3210EE, bought the house a couple years ago and it’s worked without issue but with stuff like this I know it can quickly go the other way. Appreciate any feedback, tips or advice that can be provided.


r/pools • • 9h ago

Pool Help & Questions Got a house with a pool and I don't know how to run it or maintain it.

Thumbnail
gallery
2 Upvotes

I got a house that has an outdoor pool with a sand filter and hayward pool pump. I have no idea how to run it. I do need to close it since winter is basically here but it needs to be cleaned before right? Can someone list directions on how exactly to do that? I have pool chemicals and a closing kit and testing supplies.


r/pools • • 2d ago

Pool was finished last week. The water level was filled above the second to last screw on Saturday morning. The picture is the current level this morning. Pool builder has said that the drop is caused by evaporation. Would it lose this much water in 2 days strictly by evaporation?

Thumbnail
gallery
774 Upvotes

UPDATE:

Builder confirmed this morning that there is a leak. They are going to replace the liner and hopefully I will be good to go.


r/pools • • 21h ago

Replace filters ?

Thumbnail
gallery
2 Upvotes

Pool walls stay yellow.


r/pools • • 1d ago

Pool Help & Questions Salt cell alternatives

8 Upvotes

My 3 year old Hayward T-15 salt cell has started acting funny. It under-reports the salt level by so much that the generator switches off. For example, it will report 1,000 ppm while a test with the Taylor chemical kit says it is 3,000 ppm. I cleaned it and flushed it with no change. The guy at the pool store says that these things start to wear out after 3-6 years and I should bring it in for a test. Possible warranty coverage since I bought it there.

But these things cost $1,000! Looking on Amazon I see similar devices for much less. What are the pros and cons of the Name Brand?

My pool is 10,000 Gallons with rooftop solar heat and a 3HP variable pump. Florida.


r/pools • • 23h ago

Pool Help & Questions Installing pool fence, worried about water features.

Thumbnail
gallery
2 Upvotes

Hey everyone. Installing a mesh pool fence around our pool as we have a little one. Been going okay so far but once I get a litle farther up I'm worried about potentially damaging 4 water features we have. We have two waterfalls from the side of the pool into it and two "shooters" on the deck.

Besides just avoiding these areas all together, is there anything else or any protocol I need to follow in drilling around these? Thanks!


r/pools • • 23h ago

Pool Help & Questions Winterizing

2 Upvotes

I bought a house with a pool last year. It was winterized last winter. I have not been able to use it this year yet because of renovations. Do I still need to winterize it again or should I be all set? I am not sure what was done since it was done by the previous owner.

The pool was full of leaves and frogs this summer. Do I get a sump pump to pump it down a few inches and reset the tarp and water bags?


r/pools • • 1d ago

Pool experts I need your help.

Post image
0 Upvotes

When we drained the fiberglass pool the white stuff appeared. We did not leave it empty for a long time , right the way we added water back but it did have a high CYA and metals that’s why we changed the water.
What the fuck is that and why it’s appeared and how to get it off?


r/pools • • 1d ago

Pool Help & Questions Freeze mode interrupting spa heating

1 Upvotes

I'm having an issue with my Pentair EasyTouch where the freeze mode is interrupting heating of the spa in the mornings. Hoping someone here can help!

I have a schedule where the spa will heat up in the morning, then the pool circulates most of the day, then it switches back to the spa to heat up in the evening.

I have freeze mode on for both the spa and pool, and in the mornings, if it's around freezing, the freeze mode will kick on while the spa is supposed to be heating up, resulting in a cold hot tub. I really like getting in the hot tub in the mornings, so hoping there is a way to fix this. It doesn't seem to kick on when the hot tub is heating up in the evenings, I think because it's still warmer from the day so it heats up without engaging freeze mode.

Can you program an EasyTouch to only engage freeze protection at certain times of day? Or to always have the regular schedule override freeze protection?

My ideas for a workaround would be 1. Manually calibrate the air temperature a few degrees higher. I think this could help on some mornings, but not if it's really cold. Or 2. Turn freeze mode off entirely, and just run my pump through the night at a low speed in order to basically act as a freeze mode. The thing that worries me about this is that it would just circulate the pool water and not the lines to the hot tub, so those could potentially freeze. I suppose I could set it up to switch between the hot tub and pool every hour, but this seems like a lot of work to set up.

Any help is appreciated!


r/pools • • 1d ago

Leak around black ring when switching to spa mode.

Post image
2 Upvotes

Newer pool owner here. Trying to figure out why this would be leaking around the black Clamp, but only when I switch on spa. Any help is appreciated, thank you!


r/pools • • 2d ago

Throwing jugs in the water during winter?

10 Upvotes

I'll be quick here. I live in Northern Ontario Canada. I have an above ground pool and was wondering if anybody throws empty jugs in the water before the ice forms?

I heard doing this will give the ice somewhere to expand against as opposed to expanding outward towards the walls and potentially causing damage?


r/pools • • 1d ago

How do I drain this pool?

Thumbnail
gallery
0 Upvotes

New to pool owning. Do you see any way for me to drain the pool water level in here somewhere? I’d like to make room for all the rains we will be getting and also lower my CYA. There were two silver disks under my skimmer basket. Does that do anything?


r/pools • • 1d ago

Pool Help & Questions Hayward pool pump screaming….. Any idea what this noise is? (Aside from just needing to replace the whole thing)

1 Upvotes

Planning to replace the whole system but curious to know if anyone can dx this just off the horrid noise? It’s a 2014 Hayward TriStar Pump (single speed).
We would love to be able to nurse it along for another month if possible (husband is a mechanic so a repair could theoretically be made).
Thanks!


r/pools • • 2d ago

Does this look like previous bond beam repair?

Post image
2 Upvotes

We have someone coming to take a look this week but just would like to be pre warned. A few tiles came off and this was underneath.


r/pools • • 2d ago

Casual Splash New alligator body and heads

Thumbnail
gallery
81 Upvotes

The alligator heads were placed at gate entries where animals come through the fence. And the body in the pool . I’ve had fox, possum, raccoon, cats, and iguanas.
Not a guarantee, but I’ll see how it works.
Amazon.


r/pools • • 2d ago

Water Chemistry Constant battle with PH and TA

3 Upvotes

Looking for some help or if this is normal. My pool TA droped a bunch after some rain doewn to 40. its 15k gal. I added 5lns baking soda. My salt water pool also always drifts upwards in PH and im adding acid every week to bring it down. The acid offsets the baking soda and i cant get the TA back up. I got it to 60 and 3 weeks later its back to 40. Am i missing something here is adding both weekly normal?

Edit: Pool in florida and gets lots of rain


r/pools • • 2d ago

DIY & Repairs I’m getting a leak right here, and I think it is because the plastic threads for the screw I’ve circled are stripped and I can’t secure all 8 properly or evenly as a result. What are my options?

Post image
1 Upvotes

I’m the second owner on this pool, so I don’t know when this happened, and it has waited two years to become a leak, but now we are here.

There could be a problem with the gasket underneath but since I already know that this is secured with uneven tension across the 8 screws, it seems like the logical place to start. But I don’t know the best method for repairing stripped threads in the plastic.

I’m just hoping I don’t have to replace the whole unit as that’s going to be a lot of PVC work.


r/pools • • 2d ago

Blowing out lines help

Post image
1 Upvotes

Ive tried a leaf blower with a vacuum end duct taped to the end, i tried this air compressor with a "blower" end... nothing comes out of the returns. I took the eyeballs out of the returns but theres zero water or air movement. Any tricks? Be gentle please, im a newly single lady and have to learn how to do the man tasks. Im pretty good with plumbing though.


r/pools • • 2d ago

Confused

Post image
1 Upvotes

My grandpa recently passed away and I inherited his house which has a pool what is this and which way should it be turned