r/projectcar • • 12h ago

Any other Corvair people in here?

Thumbnail
gallery
199 Upvotes

This is my current project. 1964 Chevy Corvair 500. Was the last of many Corvairs owned by my great-grandfather. and after he passed I tracked it down and brought it home. Still needs lots of love to get up and running but it's getting there slowly.


r/projectcar • • 12h ago

Build Progress Got my hands on a vortec 4200

Thumbnail
gallery
127 Upvotes

Got this trading a broken quad for it, seems like I got a good deal. First few pics are from the adventures of actually getting the thing and moving it, the other pics are from inspecting things. I’m gonna get a stand here soon and pull the oil pan off, then try and run the engine on the stand.

I’ve got a few ideas of what it’s gonna go in, but that’s not what I’m super concerned about right now. After I get it running on the stand I’m gonna build a super charger kit for it instead of doing a turbo set up. I’m gonna get a TVS1900 from a Land Rover or jag and then design a manifold and all that for it


r/projectcar • • 3h ago

Build Progress Compact of love

Post image
24 Upvotes

Finally getting to my 2 compact cars a 1971 Vauxhall Viva HC and a 1977 Dodge Colt/Mitsubishi Lancer.

The Vauxhall(Blue) has 27,000 original miles on it and is a manual.

The Dodge Colt/Lancer(Green) has about 72,000 miles on it but unfortunately is an automatic.

I’m going to keep the same color for the Vauxhall but going to go with a darker green for the Colt/Lancer


r/projectcar • • 14h ago

Build Progress 1959 Ford Ranch Wagon to Ranchero build

Thumbnail
gallery
119 Upvotes

Just a guy in rural Aus chopping up cars like it's the 1960s. Converting a waaay too rusty wagon into a custom styled utility. Similar out to how the El Caminos looked.


r/projectcar • • 1h ago

Small Block Chevy ASMR

8 Upvotes

bone stock 305 (i think)


r/projectcar • • 17h ago

Anyone have a 33-37 Chevy eagle/master

Post image
37 Upvotes

Im looking for some measurements of the width of the floor plan of the 33 Chevy eagle sedan I had saved a scrap pile. The floor boards have rotted or let go from the body tin in quite few places. The roof was cut off by the previous owners dad and it looks like he did it with a hammer and chisel so that won’t be of any use to help find everything’s home.

I plan on putting a metal floor, square tube runners and rails down the rockers and such but I need a ball park width measurement for rear door dog leg. Any help would be greatly appreciated!


r/projectcar • • 1d ago

Hamburger Miata

Thumbnail
gallery
345 Upvotes

I've been on the search for a decent NC Miata to 2.5 turbo swap for months now. Prices on the black sheep of the roadster family have gone up and kept my search fruitless. Bless the marketplace algorithm for going outside my search parameters to show me something that is not a Miata, but it is the Miata's aggressive American cousin.

This poor little GXP has been cosmetically abused. Fingers crossed it didn't extend to mechanical neglect also. Top won't close, apparently it blew open on the highway and is FUBAR. Rides like the suspension was donated to charity some years ago. Vibrates like a Hitachi wand at 70. And there's a rust hole in one very specific spot inside for no apparent reason while the rest of the body is completely rust free.

But the title is clean, there's only 50k on the clock, and I got it for $6k. I'm calling it a win. Another $6k in parts, tune, and TLC and it should be a rowdy little roadster.


r/projectcar • • 21h ago

Engine Swap Help with wiring on 67 mustang

Thumbnail
gallery
41 Upvotes

I recently acquired a 1967 mustang where the last owner did a 302 swap and started the process of putting in a keepitclean wiring harness. I am no expert or electrical engineer but want to see if I can learn a new skill.

The issue I am having is finding anything online to tell me what each wire does. The car currently runs and drives and the taillights and headlights work as well as some gauges. The issue is that the blinkers have not been wired in and the cluster lights and interior lights are nonexistent.

I am mostly looking for guidance one where to start with this project. I will be keeping it in the garage for the winter season and working on it so I am not opposed to removing all the wiring and starting from scratch as well.

Any direction or feedback is welcome.


r/projectcar • • 17h ago

Engine Swap Heart says keep the original 4.0 in my XJ, head says 5.3 swap for something I'll actually drive

17 Upvotes

Picked up a 1998 Cherokee last fall that’s been sitting since 2019. Body is solid, no major rust, but the 4.0 has a spun bearing and the auto is leaking from every seal. Local guy wants $1,800 for a low-mile 5.3 and 4L60E out of a wrecked Silverado, and I already have the motor mounts and trans crossmember.

I like the idea of keeping it period-correct with a rebuilt 4.0 and an AX-15, but I also know I’ll end up driving it a lot more if it’s actually reliable on longer trips. The swap would probably cost more upfront but save time and headaches later.

Anyone swapped an XJ and later wished they’d just fixed the original drivetrain instead? Or did the LS route end up being the better daily driver decision?


r/projectcar • • 1d ago

Rotor to trigger wheel - Sequential EFI with Distributor

Thumbnail
gallery
28 Upvotes

Hello guys,

I am working on turning my 924 to EFI sequential ignition and injection.

I found a .stl to make a a distributor housing to hold a Hall sensor, but my struggle now is how do make print a rotor to act as a trigger wheel? I think only certain metals work with Hall and VR sensors. Do I for example, get a flat rotor top cut/machined, 3D print the bracket to mount it where the ignition rotor would go, and boom I have a single tooth trigger wheel?


r/projectcar • • 21h ago

Bought a out of state salvage title vehicle but no receipts of work done

13 Upvotes

I'm in NC and recently purchased a salvaged title truck that has already been repaired from a small SC dealer, went to the tag office and was told i needed to get it inspected by the highway patrol. I've purchased two previous salvage title vehicles but in state so wasn't aware of this process and now that im looking into it, it seems that I need receipts for the work done which I dont have. Have the title and all the dealer paperwork and they're telling me most of the work done came from parts they had or marketplace buys. Can I just make them make a invoice of the parts or something? Have also seen some people say they were never asked for receipts so is this something that is 100% needed?


r/projectcar • • 1d ago

12 years ago

Thumbnail
gallery
465 Upvotes

12 years ago this is what my Camaro looked like…..
Before and after


r/projectcar • • 1d ago

Couple hours progress on a custom air intake.

Thumbnail
gallery
352 Upvotes

Cut in a 3 inch intake, glassed it and put a basic paint job, if it works good I might finish it properly. Deciding on a custom box or going back to the oem box with some modifications.


r/projectcar • • 21h ago

Build Progress Smart project car?

Post image
5 Upvotes

Hey everyone! We might have just made the best or worst decision of our lives. We recently picked up this BMW 130i E87 with 370k km (230k miles) on the clock. The goal? To completely overhaul it and get it back on the road!

The legendary N52 engine runs, but technically, it needs a massive amount of love.

We are documenting the entire rebuild in some episodes. Just pure wrenching, diagnostics, and fixing all the flaws.

What do you guys think: is 370k km a ticking time bomb for the N52?

If you love this rescue, you can check out our first episodes here: https://youtube.com/@themotorsportshed?si=uDyhFyVw7LYgSndw

Would love to hear your thoughts and any advice you have for this high-mileage build!

Cheers, Sjoerd & Myco


r/projectcar • • 1d ago

Label maker for entire car harness suggestions? Ideally one that has a cable option that’s stays on after each label is printed.

10 Upvotes

Long story short, I have a Brother PT-h100. It works, however, every single time I want to make a cable label for a wire. I have to go through like five button presses each time

I have a literal rat’s nest of wires that I need to label and install in the car. Pretty much every connector needs to be labeled. It’s going to add a ton of time to this already horrible process

Any decent labelmakers out there that are a little more streamlined than this? Maybe idk if I want cable labels it keeps that setting until I change it?


r/projectcar • • 18h ago

Bought a project that came with boxes of random parts, how do you decide what's worth keeping?

2 Upvotes

Picked up a 1984 Celica GT last month that had been sitting in a guy's garage for years. It came with about six boxes of parts he'd pulled off over time, plus a few aftermarket bits he never installed. Some stuff is clearly original, other pieces look like eBay specials from the early 2000s, and a few I can't even identify.

I've been slowly sorting through everything but it's taking forever and I'm second-guessing whether half of it is actually useful or just adding clutter. For the stuff that's obviously aftermarket or incomplete, do most people just bin it, try to sell it locally, or hang onto it "just in case"?

Curious how others have handled this kind of parts lottery without letting it drag the whole project down.


r/projectcar • • 1d ago

My project!

Post image
54 Upvotes

Bradley GT2 kit car. Needs about everything, wish me luck! I hope to get it done by the time I'm an adult.


r/projectcar • • 1d ago

Heart says Volvo 240 wagon, head says Miata for something I'll actually drive

14 Upvotes

I'm torn between two cars that popped up locally and could use some input from people who've been in the same spot.

First is a 1988 Volvo 240 wagon with the B230, 5-speed, around 180k miles. Body is straight with minimal rust, interior is worn but usable, and it runs but needs brakes, suspension bushings, and a decent detail. Seller wants $2,800. The other is a 1997 Miata with the 1.8, 140k miles, hardtop included but the soft top is ripped and the paint is faded. Asking $3,500.

I already have a daily so this would be the weekend/fun car, but the goal is to sort it out and actually use it instead of it becoming a long-term garage project. The Volvo appeals because it's practical, cheap to work on, and I could throw a roof rack on it for camping stuff. The Miata would obviously be more fun on twisty roads but I'd probably end up chasing top and interior fixes first.

Anyone gone through a similar choice? Did the "sensible" option end up being the one you regretted not going for, or did the Miata route turn out easier than expected?


r/projectcar • • 1d ago

Troubleshooting Help I want to fix up my dad's vintage car, but I have no knowledge of cars and I have no idea how to start

31 Upvotes

I'm a 19 year old girl studying electronic engineering. When I was 9 years old my dad bought a 1959 Ford Galaxie (there's debates on what ford it actually is, but officially its listed as a galaxie so I'm going with that). It was in perfect condition when we bought it. It's never had power steering but everything else was in perfect shape. My dad passed on when I was 14 and my brother, who was 20 at the time, was the one who took the car out for drives because he learnt how to drive it from my dad and also learnt basic car knowledge from him in terms of taking care of it. We had a lot of problems with him and now it's just my mom and I with this car for the past few years. Added to that when he was driving it the ball joint snapped and we haven't been able to drive it for years now, since 2022. We got a temporarily mended one just to move it into our yard but other than that it hasn't been able to move. My brother was responsible for getting the particular ball joint for this car imported from another country because it's apparently not available in ours. He never ended up doing it and my mom and I have now been trying to sell it for a while to no avail. I also want to keep the car because of the memories of my dad and how much I love and adore it. Recently, I've been more interested in taking up projects to build things relevant to my degree. A friend of mine also once told me I could learn from YouTube and the internet about cars and be able to fix up my dad's one. This occurred to me again as I've been searching for random electronics to build things. And I thought maybe I should give it a try and try to fix things. The ball joint isn't the only issue, there are other things I can sort out until I'm able to get the part such as a coolant leak and a battery change. I'm just not entirely sure where or how to start. Does anyone know of any really good resources or YouTube channels that could help me learn the basics and work my way up so I can fix this car up and also get my car knowledge to a place where I can take restoring up as a hobby like my dad did? We also have an incomplete rebuild of a 1966 Ford Galaxie in our garage that my dad started on but didn't get to finish. I'd really like to work on that too if I'm able to get my car knowledge up to that level because it's been a struggle to sell these cars and I love and adore them with all my heart and I'd love to take on more hobbies.


r/projectcar • • 2d ago

Protege parts hoarding

Thumbnail
gallery
58 Upvotes

Parts keep rolling in for my kids project protege5. Also painted the rear valance area


r/projectcar • • 2d ago

Build Progress Got It Moving

Thumbnail
gallery
378 Upvotes

After a couple months of trying to work on this project car on my own, I had to call in reinforcements (my grandaddy and his friend). I wanted to hold off on telling my grandad and dad because I already knew they were gonna say it’s a waste of money and a dumb idea, but I already had my mind setup lol. The original owner of this 84 Camaro passed away over the summer and his buddy that I got the car from couldn’t answer many questions for me. A few things we did were swap the starter, install the distributor and adjust timing, new accelerator cable, rebuilt the carburetor (street avenger) and come to find out there weren’t any pushrods or rocker arms in the engine when I got it! Of course we had to change the oil and fuel also the filters and pumps (car was sitting for 10+ years since the original owner got sick). After swapping all the above, we were able to drive a few miles to the gas station and Auto Zone, just to put a couple of miles on it before actually calling it good. The main things I need now are a couple of vacuum hoses and fix the skipping, the rest are kind of minor like a new hood or a hood scoop, fixing the headliner, paint etc. If anyone has any recommendations around Atlanta, please let me know. I’m hoping to have everything wrapped up pretty soon and at least be able to bounce around a good bit on Thanksgiving lol


r/projectcar • • 1d ago

Feeling overwhelmed whit to many project cars :/

Thumbnail
gallery
14 Upvotes

Hi guys I need some advice, I'm 20 and from eastern Europe

I got this blue 2004 VW Passat B5 5 V6 Diesel 4 Motion wich drives beautiful and looks too and Is a dream car for me but of course it's being a VW it has a rusty rear subframe and rust is starting to show on hidden places even though it was repainted profesional and looks the part, its very well kept but it being a such a complex car alot of maintenance is needed and I try to keep up i have done a engine service and a tramsion flush and I gota say it's a solid car but the thing I've had a mice problem at Home from all the dogs and I'm scared they gonna chew some wires ( this eats me up the most)

I also have this grey sedan VW Passat B5 5 1.8 turbo whit only 80k thousand miles (140k) km 1 owner bought new I have all the receipts since it was new and it drives like a new car and alot of mainantance was done profesionaly at VW garage but it seing many winter it's got rust on the front sub frame and many other hidden places , i had water intrusion on it from the Polen Filter gasket wich failed , I replaced the gasket but unfortunately the metal where it's mounted rusted too so idk what to doo whit that one too it's such a shame it's so original and drives so nice

The most vintage Car I have is a 1997 Dacia (the nardo grey one) whit only 14k km (aprox7k miles) the body is in new like condițon almost no rust at all but it being a carburated comunist era car I never managed to get it to run right and now the rear drum brakes seized from siting

The next car I have a 2014 B7 Passat 2.0 TDI wich was my parents car, it s a rare spec, cream leather interior, panoramic,distronic, Lane keep assist and is just a dream car which never made any problem in the year they had it but guess what since I got it soudenly I get a weird shift from 6 to 5 gear, one bi xenon headlights computers burned out ( I need a new headlight),it started making a weird injector noise especially when cold, the steering started to be notchy which I think is from the steering rack, I just feel so overwhelmed I have done all the services that where needed and always drove it whit respect and warmed it up i just don't get it. I have all my dream cars I could dream off but it just seems they falling apart in front of me and I also don't know and don't got the talent to work on them (other than basic stuff) and finding a good mecanic here is hard as most rip you off , in my free time I don't got the Energy to try sort them all out and if I try I just stress myself and waste all the time I had to relax before work as I'm a truck driver and don't spend much time at home

My parents are bulding me a garage to work on them but I just think the mice are gonna be a problem from all the dogs they have(my mom has a pet saving problem and has over 30 dogs) I don't have the needed time to work on them whit the job I got, i always try to do the preventive stuff to them but it always seems to late I'd just like to store them away and sort them out slowly when I'm feeling like this but then again who know what mice or siting damage they will get, I also don't want to sell them and regret they are rare and my dream cars :/

My Daily is a Passat. b5 wagon 1.9 TDI wich I spend a lot of money trying to sort out (new clutch and flywheel) injectors , timing belt, all new brakes new starter etc but it just dosen t end as there are so much other things to sort like the central closing which dosen t work or all the plastic bits that are broken on the interior and exterior that ar falling off, I tried to tidy it up but some ashole of a painter riped me off and the paint is now peeling,the rear parts of the rockers are rusted out, the complex suspension which i almost sorted out but there still are a few control arms to change and also the battery drains out if it sits ,i wanted to replace it whit the B7 but soudenly when I tried doing that the B7 started to go wrong too so I don't know what to do whit this B5 as there is just so much stuff wrong whit it and I don't like driving a car in the small time I'm home where half the things don t work but also so much money went into it which id never get back trying to sell


r/projectcar • • 2d ago

Troubleshooting Help Help needed with L98 V8 no-start in my Jag

Thumbnail
gallery
22 Upvotes

Posted this in the C4 subreddit but posting here because I really need this thing to get kicked over before this Friday.

1976 XJ6 that was swapped to an 87 Vette engine/trans in 1993. Anyways...

Long story short, I'm experiencing a weird mix of no-spark and no-fuel. I presume something to do with this pictured mess of distributor/MSD box wiring.

Long story long, I've driven this car on a 25 hour round-trip road trip twice now. First time, makes it down easily, no issues aside from blowing a fusible link. Heading back up (literal 3,000 foot jump in elevation), I was met with intermittent spark loss when I had to increase load going up hills. This feeling felt just like my old Volvo when the coil died or my C3 when the distributor would get unplugged over bumps. I'd pull over, wait about 5-15 minutes, then she would crank up again.

I get back to town, drive it around for a few days, then it randomly dies not 5 minutes into my commute. Later in the day, still dead. Only revived it after unplugging my HEI coil, cleaning internal contacts, and making sure the HEI coil was on tight.

Second 12 hour drive down to destination, did it totally fine. Driving within my destination, she picked up a brutal misfire which also led to sporadic hard-start/no-start conditions. Had to go home though, so I drove it 12 hours back with this misfire. Same thing, it would randomly lose spark when it picked up load, would occasionally die at idle. I get home, and she hasn't started since I parked her up.

I have resistance tested my HEI coil, checks out. Verified adequate power delivery to my MSD box, checks out. Replaced my 7 pin ignition control module. Verified resistance on my dizzy's magnetic pickup coil. Cleaned all grounds, cleaned all power contacts, checked my MSD box trigger. It all checks out. Even replaced my dizzy rotor/cap.

The wires/harness I pictured... The left 2-pin harness goes to my MSD box's white trigger wire. The right one, I'm unsure but it goes into the main engine harness. Originally, the red output of the left harness was hardwired to the right harness, but also had a split going to what appeared to be a noise suppression transformer looping to the other pin on the right harness. I have no idea why that output would be hardwired to one pin on the harness, then looped into a transformer just to go back to the other side of the harness. I get varying spark results depending on how I wire all that up.

Where I'm at now: sometimes I hear it kick a bit when cranking. I also sometimes have literally 0 pressure at my fuel rail, even when jumping my fuel pump. Then sometimes it geysers out like it should. So sometimes it has spark, no fuel. Sometimes it has fuel, no spark.

Guys, where the hell do I go from here?


r/projectcar • • 2d ago

Advice wanted on trans swap

Post image
28 Upvotes

I just got this car gifted back to me after I sold it to a family member years ago. I bought the car while I was still in Afghanistan and didn't actually have it that long. It has a 327 with a 3 speed on the column. When I got it, it was very original with only 40k miles.

The family member that had it put a Holley Sniper EFI kit on it and it's almost un-drivable in it's current state due to the pedal not allowing low rpm in any gear. I think I found the fix in a throttle bar extention, but I'm still waiting on that part.

One of the reasons I sold this car is it's just not fun to drive with the 3 speed. I'm short, so having the bench seat pushed all the way to the steering wheel is really uncomfortable. I want to swap in an auto trans but I'm not really sure which direction to go. I've mainly been looking at a 700r4 or 4l60, but they don't seem like direct swaps.

Does anyone have any advice on what direction I should go? I would say my main concern is ease of the swap, I'm not dead set on having overdrive.