r/raspberry_pi • • 1h ago

Show-and-Tell Update: my Raspberry Pi rowing coach for the SmartRow pulley, now with a redesigned display

Thumbnail
gallery
12 Upvotes

A follow-up to my earlier post. Quick recap: a Raspberry Pi 4 sits between my SmartRow pulley (on a WaterRower) and my apps. The SmartRow app and the Peloton app connect to it at the same time, so I can take a Peloton class and still get SmartRow's force curves. The Pi also runs a coach that compares every stroke's force curve with my own Easy stroke and gives one short cue.

**What's new**

* **Same layout on all three screens:** a floating window beside the SmartRow app on my tablet, a web page, and the Pi's own small screen. Watts, stroke rate and time on top, the force curve in the middle, the cue under it, total time in the same corner everywhere.

* **Peloton-style power zone bar:** each border shows the bottom of that zone in watts, and the bar fills as you go. The watts number takes the colour of the zone you're in.

* **Heart-rate zone box** underneath in the same style: zone, bpm and % of max.

* **Force scale** on the curve, like the SmartRow app's chart.

* **Faster curve:** each stroke now appears about 0.1 s after the SmartRow app starts drawing its own (it was about half a second), measured from a screen recording.

* **Cues during efforts:** LOOKS GOOD, EARLIER PUSH, LONGER STROKES, STRONGER FINISH, BETTER TRANSITION. Each is judged against my own Easy rowing, not a generic ideal.

* **Planned workouts** from intervals.icu: the screens show the step, the power and stroke-rate targets, and time or metres left.

In the background, an optional lidar sensor behind the rail times the seat, so the coach can split each stroke into legs, body and arms, and the recovery. Every row uploads to intervals.icu and Strava, and the Peloton class list refreshes itself after each row.

The pictures show the floating window, the web page and the Pi screen, plus a few of the cues. The curves in them are test data; the layout is exactly what I row with.

Code (open source, GPL-3.0): https://github.com/madooroy/SmartRowBridge

Not affiliated with SmartRow, WaterRower or Peloton. Happy to answer questions.


r/raspberry_pi • • 2h ago

Project Advice Any Network analytic Tool Tips

1 Upvotes

I am working on an Network analyzre like Fluke. What i want most is to connect the RBPi to an Wwitchport an read out the switchport and configured vlan. Are there Opensource Tools that do that?