r/rccrawler • • 2h ago

My Trx4 defender.

Thumbnail
gallery
12 Upvotes

I'm making body a bit more detailed, still half way there but now I'm thinking decal on side. Any shop with something vintage looking in scale or maybe somebody is making them from file?


r/rccrawler • • 12h ago

I don't know why I did this but it is very goofy

Post image
65 Upvotes

r/rccrawler • • 5h ago

The Trail Doesn't End at Sunset

Thumbnail
gallery
12 Upvotes

When the day winds down, the adventure isn’t over.
Loaded up with camping gear, recovery boards and a spare tyre, this little Bronco was ready for one more rocky trail before calling it a day.
Sometimes the best adventures happen just before the sun goes down.
Tiny truck. Big journey.


r/rccrawler • • 6h ago

Stretched K10 SCX24

Thumbnail
gallery
14 Upvotes

Budget build using traded parts and AliExpress esc. The K10 body is made for C10 wheelbase but the cut fenders make this work with my Gladiator WB. I was very tempted to go with a bigger tire combo but I like this more scaled look.


r/rccrawler • • 1h ago

Buggin out!

3 Upvotes

This little thing surprises me every time I take it outside


r/rccrawler • • 18h ago

Porkers? You're talkin about porkers Mr hooper?

Thumbnail
gallery
28 Upvotes

NECA ultimate Hooper makes a pretty good driver figure. Fairly random look and a lot of accessories. I'm dumping the Canadian tuxedo for the sweatshirt, you get a nice watch on his arm. Even comes with styro cups, a nice bag, and his gloved hands look like just gloves in the stash. $35, but I inventoried my paint and just paint would cost more.


r/rccrawler • • 2h ago

Purchase question

1 Upvotes

Which would you recommend, and why

Hi. There, I'm planning to buy a 1/18crawler, previously I had an ftx outback 2,which was fine, but very poor low speed control ruined it.

While I don't plan to do competitions, I'd love to have something that could.

As far as I can guess, these are the shortlisted ones

-FTX. UTAH 2.0

-Redcat ascent 18 apex

- HPI venture 18 cc

Utah is on promotion and comes with one spare battery for 106 pounds, while the other two are at least twice that. Is it worth splashing, or the difference is not that much?

Id love to build my own but I honestly suck at DIY stuff, and I probably will have to sell the parts at a huge loss without making progress.

For me, I'd love low speed control, and the overdrive idea sounds great, but again, not planning on competing.

I'd like to say that money isn't a problem, as I can afford any of them, but I with age logic started to prevail more , and heating bills are going up as we speak.

What are your thoughts?


r/rccrawler • • 16h ago

Portal axle or standard locking diff? Thoughts?

Post image
12 Upvotes

r/rccrawler • • 16h ago

Sheriff DARE Unit

Post image
13 Upvotes

r/rccrawler • • 1d ago

SCX30 Tacoma Bumpers

Thumbnail
gallery
85 Upvotes

How’s these Aluminum Bumpers for your SCX30 Tacoma?


r/rccrawler • • 20h ago

Complete comp build

14 Upvotes

This is my complete SCALE comp build.

I swapped the Rubicon body (from previous posts) out for a Cherokee body without a roof rack. And did a super sweet line with it.

This is a 1/18 scale crawler that started as the regular (not pro) JJRC C8801. It now weighs 3.8Lbs with 70mm tires and is built entirely with Injora trx4m parts with custom mounting points for a good majority of the parts. Its costed a total of around 5-700 CAD


r/rccrawler • • 21h ago

My take on a "MonsterMon"

Thumbnail
gallery
15 Upvotes

It took some fideling but I got scx6 wheels and tires to fit.

I used offset 12-17 adapters but had to drill out the adapters and the wheels as well as get 5mm barrel bolts.


r/rccrawler • • 19h ago

Random bogging help?

3 Upvotes

So I don’t know how much you can get from this video but when I move forward, it tends to bog or like it’s trying to apply brakes

This is a very slight angle and I am not going very hard with the throttle and even if I go up to any angle that’s sharper for example blocking crawl, maybe 60-ish degree angles and tends to bog out like this I can try to get better videos if needed


r/rccrawler • • 21h ago

2-Door Gladiator Conversion

Thumbnail gallery
2 Upvotes

2 door gladiator conversion. Made it way less top heavy.


r/rccrawler • • 17h ago

C54 vs mn300

Thumbnail reddit.com
1 Upvotes

r/rccrawler • • 1d ago

making a new trunk cage

Thumbnail
gallery
5 Upvotes

r/rccrawler • • 1d ago

Made some upgrades and the Fusion is itching for some real testing!

11 Upvotes

r/rccrawler • • 1d ago

1/10 ford hardbody?

Post image
10 Upvotes

Bought myself one of these even though it’s not a hardbody. I liked the look of it because it is a trophy truck that doesn’t have the extra wide/cartoon look.

I know the body is already trimmed and is ready for paint,but I’m still not sure I can do it justice. I also prefer hardbodies.

Anybody seen a nice FORD hardbody set that they think my suit my need?

I am looking on my own,but obviously know I could miss the perfect body because of my search criteria.


r/rccrawler • • 1d ago

Vertex 10w on the way!!!

Post image
3 Upvotes

It was hard to ignore that 20% discount


r/rccrawler • • 1d ago

First trail run with the F100

Thumbnail gallery
9 Upvotes

r/rccrawler • • 23h ago

Looking for recommendations on the best budget FPV setup for my MN99S V2

1 Upvotes

​Ideally looking to keep the whole setup under £100 (UK). Main use is indoor crawling / slow trail driving, so I don't need crazy long range, just decent clarity and low lag.


r/rccrawler • • 1d ago

Is TRX4 the only one?

Post image
52 Upvotes

Update: Thanks all. Cross RC it is!

_______

I’m looking for a 1/10 (open to 1/12 if they are pick up bodies) that has the flexibility to lock and unlock diffs.

So far, I haven’t find anything more than the TRX4. Axial seems doesn’t have any options for lock/unlock diffs even after market and the other ones I’ve found are 1/8 and I already have a traction hobby 1/8.

Saw some RGT pick ups that look cool but never heard of that brand and I think support would be unbeatable for Traxxas.

Thoughts?

Edit: clarity


r/rccrawler • • 23h ago

A bit of woodland crawling with the 4x4

Thumbnail
youtu.be
1 Upvotes

r/rccrawler • • 1d ago

Suspension tips?

Post image
1 Upvotes

So I’m in a post about this maybe two weeks ago and a guy told me to lift the RC from the axles rather than the body to display how the suspension works a little bit better on the front end I have an elastic string so when I’m crawling upwards, my front end doesn’t lift up and tip me back, causing me to flip and my rear suspension does not have that that is why it is a higher

A lot of people have been recommending limiting straps, but I’m eager to find a way that does not require elastic bands or limiting straps if it’s weight which I’m assuming I’m hoping somebody has tips. This is going to be mostly important for my upcoming RC build where adding stuff like limiting straps or elastic bands will be much more visible