r/roasting • • Jul 31 '14

Photos of roasts share very little meaningful information for diagnosing a roast.

231 Upvotes

Traffic here is low enough to accommodate any "hey, look at my first roast" photos, but if you are seeking feedback, be advised that we can't tell you very much based on a photo. Except for burned roasts, the lighting conditions have as much to do with the appearance of the beans as the degree of roast. We can tell you whether the roast is even or not, but you can see that for yourself. If you post closeups we can diagnose tipping, pitting or other damage. In general you are better off posting your observations with any photo.

Edit: as Idonteven_ points out, we can probably help you diagnose really burned and uneven roasts by most photos with any sort of decent lighting.


r/roasting • • 6h ago

Ethiopean coffee roast

Post image
7 Upvotes

This was my ethiopean coffee roast i did last night. I performed the roast on hot plate with rotating arm. There are some charred beans that i removed. How would you improve the roast so you can get those finer ethiopean flavors. Below is my roast temprature of the plate. I dont have coffee bean temprature measuring device:

Nov 18, 2026 Batch: 200g green → 163g final (~16% loss, Full City) | Cold garage
​Preheat: 140°C ​0:00 (7:36 PM): 140°C → 150–160°C | Charge & Drying ​~2:00 (7:38 PM): 165–170°C | Drying (lid closed for cold air) ​~5:00 (7:41 PM): 200–210°C | Yellowing — even pale yellow
​~8:00 (7:44 PM): 220–230°C | Early Maillard — golden-tan
​~10:00 (7:46 PM): 240°C (MAX) | Mid Maillard — golden-tan to light cinnamon
​~13:00 (7:49 PM): 240°C (MAX) | Late Maillard — cinnamon-brown, light haze
​~13:30–14:00 (7:50 PM): 240°C (MAX) | First Crack starts ​~15:00 (7:51 PM): 240°C (MAX) | City — medium brown, light smoke, heavy chaff
​~18:00 (7:54 PM): Off | Drop — pulled due to one-sided scorching and dark chaff


r/roasting • • 3h ago

Anyone Using PID Roasting With Artisan?

2 Upvotes

Good morning from Rainy California, very unusual for us. I am exploring to roast with Artisan 5.0.0 and my Fresh Roast SR-900, in which Artisan uncluded the SR-900 as one of the machines it supports but I notice that it does have some kinks and glitches. I asked AI how to set it up and because the intended setup that loads when I choose SR-900 as my machine but it does not worked so I started working with the PID setting but found several problems. The most noticeable is the RoR that jumps all over the place with the use of the PID's and I know because if I don't use them the roast does not have the exaggerated jumps as when using them. trying to maintain temperature, it changes heater setting almost every second and I am afraid it will cause the SR-900 to fail sonner. not counting the fact that I have not found a way to control the Fan settings. If anyone of you have any idea how to work with PID settings I will appreciate your input.


r/roasting • • 15h ago

First Timer

Thumbnail
gallery
13 Upvotes

First time roasting coffee, ever.

Carbon steel flat bottom wok over medium-low flame for 23m after baking at 250F for 40m.

So much color diversity, how to get more homogenous roast?

Would love feedback and pointers.


r/roasting • • 22h ago

Fine details of a Colombian roaster Huaska

Thumbnail
gallery
10 Upvotes

Every part, including the metal components, was designed with great attention to detail 👌


r/roasting • • 21h ago

Newbie question about a roaster

7 Upvotes

I see a lot of people buy the fresh roast 800 and 900.

My question is I am thinking either of those or the kaleido m2 lite with artisan. I have zero experience in roasting. This is the first purchase I would be making. I just love coffee, espresso and hobbies and want to try it and hopefully get good enough to have fresh coffee for my family and try to impress a friend here and there.

Would love your thoughts good and bad.

Thanks


r/roasting • • 19h ago

How to get into roast?

3 Upvotes

How does a coffee enthusiast begin getting into roasting?

What are my options if I want to eventually experiment and increase my growth if I truly enjoy enjoy roasting and keep reproducing the same roasts and then transitioning into a roasting small batch specialty coffee beans?

From what I’ve read, seems like Skywalk is a good beginning machine? And a good source for green beans is Sweet Maria’s.


r/roasting • • 21h ago

First roaster - SR900 or M1 Lite

3 Upvotes

Hey guys, new here and also just trying to get into coffee roasting. I've been pouring over threads about the best first time roaster, but most of them are old and vary on a case by case basis so I thought id try my luck asking for myself.

Between my wife and I we drink a double shot espresso each a day. She blends decaff with regular grind to make a half caff. I'm stuck between picking between the SR900 that should be back in stock next week and the M1 Lite for our first roaster. Seems like the SR900 would be easier to work with, but the M1 Lite would be better overall once we learned what we're doing with it. We're also trying to stick around that $500-$700 price point or I'd definitely just get the M2 Lite and be done.

Anyone here gone from a fluid bed roaster like the SR800/900 to a drum style like the K1 or K1 Lite? How do you like it? Is there a noticeable difference flavor profile? We just want to get the right one right off the bat so we dont have to waste money upgrading in the near future.

Edited to add - We have two PC's and tablets at home to remote into them with for Artisan if we go the K1 Lite route


r/roasting • • 23h ago

Learning curve for a first-time coffee roaster AND this will be on a Aillio Bullet R1 V2

2 Upvotes

The title kind of says it all but I have the opportunity to buy a used Aillio Bullet R1 V2 for $2500. Seems like a good deal to me. I have gotten my espresso to a place I'm really happy with and I'd love to experiment with roasting my own beans with some aspirations of opening up a craft coffee shop one day in the distant future.

Am I getting my feet TOO wet by going straight into something like the Aillio Bullet? Talk me into it or out of it :)


r/roasting • • 20h ago

Looking for a source for 120mm burrs for vintage Mahlkonig VTA6S.

1 Upvotes

Anyone know of a second source for good 120mmburrs that would fit a vintage VTA6S that I am restoring. I don't know the vintage but the thing was virtually free when I bought a container of equipment from a failed roastery. Location is the Philippines but I travel frequently to the US. OEM burrs are a shocking $600.

TIA


r/roasting • • 1d ago

Getting him started young. My 9 year-old son joined me and wanted to help roast.

Post image
38 Upvotes

Just a nice moment where he took an interest. He said he regrets that he can't drink coffee yet 😆.


r/roasting • • 1d ago

New roaster day.

Thumbnail
gallery
25 Upvotes

r/roasting • • 1d ago

Setting up an industrial roastery

0 Upvotes

I'm looking to set up an industrial roasting facility. It'll have a 120kg Buhler or Brambati roaster for "commercial quality" and B2B orders as well as a 35kg Loring or 30kg IMF for specialty B2B and my own brand. Green coffee intake systems, grinders, automated packaging machine, etc as well along with a cablevey style system for moving the coffee.

Looking for feedback on the roasting machines.

Setting up this plant in India


r/roasting • • 1d ago

What percentage of roast levels are you selling?

5 Upvotes

For those of you selling roasted coffee commercially, what is the percentage between light, medium, dark and decaf. Looking for ballpark figures. I am just getting started and trying to be a little proactive for my fist green bulk buys. I don’t sell to cafes or restaurants, just online and in retail shops. Thanks


r/roasting • • 1d ago

Invoicing and taking clients

2 Upvotes

Hey roasters if you sell wholesale do you have a system that works for you. like is there a software


r/roasting • • 1d ago

Top green beans for home roasting.

3 Upvotes

I just started roasting a couple months ago and I have mainly roasted Guatemalan, Ethiopian and Costa Rican green beans from Sweet Marie. Can anyone share some beans that they really enjoyed roasting at home?


r/roasting • • 2d ago

Seeking used Kaffelogic nano 7 or Nucleus Link roaster

4 Upvotes

ty in advance! based in portland or. any potential sources are welcome :)


r/roasting • • 2d ago

Garage temps dropped and now my roasts are dragging forever

5 Upvotes

i roast on a Gene Cafe out in my detached garage and everything was super consistent all summer. now that it's getting down into the 40s out there my batches are taking like 18 minutes to even hit first crack and the coffee tastes kinda hollow. tried preheating longer yesterday and it barely made a dent. do i just drop my batch size way down for the winter or try to build some kind of windbreak around it? really not trying to move this thing into the kitchen if i can avoid it


r/roasting • • 2d ago

Bali Blue Moon

Post image
19 Upvotes

12.9% Weight Loss (16.0 oz down to 13.94 oz): That puts this batch squarely in a City to City+ medium roast—right after the completion of first crack and well before middle of second crack. This batch of Bali Blue Moon will keep a little more of its brighter citrus structure and sweetness alongside its classic Indonesian cocoa body, with zero smoky bitterness.


r/roasting • • 2d ago

New beans and mediocre espresso

Thumbnail
gallery
6 Upvotes

No complaints, just sharing.

I bulk order green beans, 40 pounds at a time. First batch of the most recent order.

Bad latte art by me from a thrift store De'Longhi Stilosa, I'm still working on milk 🤣


r/roasting • • 3d ago

Kaleido M2 lite cleaning

7 Upvotes

Now that this roaster has been circulating around. Anybody have tips on how to clean the internas (drum etc). And how often should we be cleaning this. I usually roast 2-3 batches per week.

Is it similar to the instructions on kaliedo website. Wasn’t quite sure as this roaster is new but I’m guessing it is. Just wanted people’s thoughts and experiences.


r/roasting • • 3d ago

Getting a few roasts in before dinner, hiding out in the garage 😆

Thumbnail
gallery
38 Upvotes

r/roasting • • 3d ago

Production roaster looking for the next step in their career

12 Upvotes

Hi all, I’m a London based production roaster looking for my next role, and I’d love advice from people who work as head roasters or green bean buying/importing.

I currently do sample roasting, cupping and QC of importer samples, but I don’t do the buying side. I’m interested in both head roaster and quality control roles, I’m just not sure which path to take.

For anyone who works in either:

  1. How did you get into this role and what does a typical week look like?
  2. Is a Q Grader certificate expected, or is cupping and roasting experience enough?
  3. What do you think of the industry overall, and which roles do you think are worth pursuing for the long term?

Thanks in advance, I’d appreciate any perspectives!


r/roasting • • 5d ago

What's the deal with Japanese coffee roasting ?

295 Upvotes

At first, I thought it was just an isolated case, like one random shop burning their beans. But the more videos I watch, the more I realize how super common this actually is over there. The beans often look completely charred, which goes completely against usual modern roasting standards. Can someone explain why they do this?


r/roasting • • 4d ago

What do you do with left over green beans?

6 Upvotes

As the title says. I have been roasting for a while now and I keep running into the issue where I order a couple pounds of a bean, then after all my roasts (on the sr800) I wind up with a suboptimal amount of beans like 50g or something. And now I have this for many different beans. Help lol.