r/selfhosted • u/ConcreteEntree • 1h ago
Meta Post Last.fm API keys will require Pro from 1st December
support.last.fmMany folks use Last.fm for some applications they self host, so flagging here. Not a lot of heads up either, unfortunately.
r/selfhosted • u/ConcreteEntree • 1h ago
Many folks use Last.fm for some applications they self host, so flagging here. Not a lot of heads up either, unfortunately.
r/selfhosted • u/lmm7425 • 2h ago
https://github.com/opencloud-eu/opencloud/releases/tag/v9.1.1
Announcement: Production releases will require a subscription starting in April 2027
Starting with the Production release in April 2027, Production releases will only be available with a subscription. The Rolling release channel stays public and free of charge, and it will continue to receive all fixes. Read the blog
OpenCloud has 3 release types:
Originally, Production releases were free, but will now be behind a subscription. The license and code isn't changing, just how you get the binaries.
You'll need to move to a Rolling Release starting in April 2027. To migrate, you need to replace the image opencloudeu/opencloud with opencloudeu/opencloud-rolling and select a Rolling Release that is newer than your Production version.
r/selfhosted • u/Arelvox • 10h ago
The "unconfirmed OpenJDK RCE" from yesterday is now confirmed by OpenJDK and patched by Oracle. Short version for self-hosters:
What: heap overflow in Java's hardware-accelerated Base64 decoder. Calif showed pre-auth RCE with default configs on Keycloak, Jira, Confluence, Artifactory, Jenkins and PingFederate.
You need ALL of these to be exposed:
- Java 17.0.6+, 21, 25 or 27 (any vendor: Temurin, Corretto, Zulu...). Java 11 and normal Java 8 are fine.
- x86-64 CPU with AVX-512 VBMI (Intel Ice Lake Xeon+, AMD Zen 4+). ARM / Raspberry Pi is NOT affected.
- Untrusted Base64 reaching the decoder (Basic auth, JWTs, uploads...).
Check your CPU (all 4 flags = affected):
grep -m1 '^flags' /proc/cpuinfo | tr ' ' '\n' | grep -E '^(avx512f|avx512bw|avx512vbmi|bmi2)$'
Check Java inside containers, not just the host:
docker exec -it CONTAINER java -version
Fix: Oracle builds ending in .1 (17.0.21.1, 21.0.13.1, 25.0.5.1, 27.0.1.1); other vendors are rolling out. Until then, -XX:-UseBASE64Intrinsics stopped the overflow in every tested version (needs a restart/recreate). Don't use -XX:DisableIntrinsic=_base64_decodeBlock on its own, it stops the JVM from starting.
No exploitation in the wild reported yet, and VulnCheck says full RCE needs per-app work, but crashing a JVM is easy.
r/selfhosted • u/cornea-drizzle-pagan • 6h ago
A Garmin watch records your heart rate, sleep, stress, HRV and location around the clock, and by default every bit of it goes to Garmin's servers. I used to scrape Garmin Connect every hour just to get a copy of my own data back, which always felt backwards. Last week I finally cut Garmin out completely. The watch (a recent Forerunner) now talks only to my phone, my phone talks only to my server back at home, and Garmin sees nothing. Sharing the setup since most of what I found online was for older watches.
The setup
Watch -> Gadgetbridge (Android, from F-Droid)
-> auto export zip every 3h
-> Syncthing -> WireGuard -> home server
-> hourly cron converts it to one JSON per day and commits to gitThe watch pairs straight to Gadgetbridge over Bluetooth. Garmin Connect isn't even installed on my phone. Gadgetbridge has no internet permission by itself, and on top of that it hard blocks garmin.com, garmin.cn and dciwx.com for anything the watch asks for.
My phone only reaches my server over WireGuard and the tunnel isn't always up, so I let Syncthing carry the export. It just catches up whenever the tunnel comes back.
On the server a cron job picks up the newest export, runs a Python script that reads the Gadgetbridge sqlite database and writes daily JSON files in the same shape my old Garmin Connect scraper produced, then commits. So everything I had built on top of the old scrape kept working. The cron fails loudly if there's no export newer than 36 hours, so I notice if the phone stops exporting.
What actually syncs
More than I expected: heart rate, steps, stress, Body Battery, respiration, SpO2, HRV, sleep stages, sleep score with all its sub scores, training readiness, recovery time, acute and chronic load, endurance score, race predictions, and activities with the original FIT files.
What doesn't
A few metrics like skin temperature and sleep need don't come through yet. Some of it is sitting in the raw FIT files and can be decoded with the Garmin FIT SDK if you care enough. A couple of things like fitness age seem to be computed on Garmin's servers, so those are just gone.
Connect IQ apps still work
I have two watch apps I wrote myself that talk to my own servers. With Gadgetbridge's Internet Helper add-on they still get through. It's block by default and you allow hostnames one at a time, exact match, so the watch can reach my servers and nothing else.
Workouts onto the watch
This was the annoying part. Structured workouts normally get pushed through Garmin Connect. What works instead: convert the workout to a FIT file and drop it in GARMIN/NewFiles over USB. The watch imports it when you unplug. Gadgetbridge can also install a workout FIT you share to it, but you have to tap confirm every time.
Downsides so far
Happy to answer questions if anyone is trying this with a recent Garmin. It has been solid for me so far.
r/selfhosted
•
u/PotatoMaaan
•
21h ago
[Edit: No AI was Used! Fuck clankers]
The number one point of discussion here and in similar communities is "how do I get to my services from outside my network". The "purest" solution is to set up wireguard and just connect directly to your router from the outside. But that falls apart in a world where CGNAT, is a necessity to keep the IPv4 internet afloat.
So people turn to services like Tailscale or Netbird, or, what I also used to do for a while, run all traffic through a VPS with a public IPv4 address. This now makes you depend on cloud services again which is what we've been trying to avoid in the first place.
IPv6 solves exactly these problems (and many more), but it often gets ignored in these discussions. The first reaction I and many other people had to seeing an IPv6 address was "ew what is this, that looks horrible, I cant remember that!" and then they write it off as being stupid and disable it. (I did this too!).
After actually learning about IPv6 and migrating my network to basically be IPv6 only, I want to share what I've learned and "debunk" some points that come up all the time in discussions about ipv6.
If you don't want want to read my yapping (understandable), I highly recommend this video by apalrd that got me into ipv6 in the first place: https://youtu.be/42Hy4JtBeQA
::1 or ::beef if you want. If you're working with addresses from the internet, only the first half is relevant for global routing. You can treat the second half like the source port number in ipv4 NAT traffic (it identifies the device from a network)Public address does not mean its publicly accessible. You router still has a firewall. You need to explicitly allow traffic to your device. Public address just means that its in the same address space as everything else, like a public ipv4. It's just that instead if your entire network sharing a single address, you get an entire /64 block of addresses and each device then gets its own full address from that block. NAT is not a firewall, those are different things.
This is what IPv6 privacy extensions are for. Your device regenerates a new host part in the same /64 prefix every couple of hours and uses this for outgoing traffic. This means that to any website or outside service your IP only stays the same for these couple of hours. This means that the network part (the first 64 bits) is the only thing that services can use to reliably track you. This is the same as with v4 NAT where you can only reliably identify entire networks. Every major OS implements this by default. Even most linux distros do this.
With dual stack that is true. But you don't actually need to run dual stack to access the v4 internet. NAT64 can wrap v4 addresses in a v6 prefix (like 64:ff9b::1.1.1.1)and your router can then NAT that to a regular v4. This is what a lot of mobile networks have been using for years. The full implementation of this is called 464xlat and is fully seamless. It does require a client part but that's starting to become viable as of late as more stuff ships support for this.
As it turns out IPv6 adoption is much more widespread than I initially thought. Googles IPv6 statistics have recently crossed 50% (at least on weekends). Looking at it on a per country basis was even more surprising. France is even at 88%, Germany at 75%. The US is currently at 54%, so if you're from the US and accessing google over ipv4, you're already in the minority by now. Hyperscalers are also doing v6 internally because they've run out of private v4 space a long time ago. It's a slow, but that's to be expected when you're doing a "ship of theseus" on the entire internet.
This is the biggest limitation on hosting with v6 only. But there are ways to deal with this. My favorite has been to use a VPS. But this time we don't send everything through the VPS and instead only use it to map v4 to v6 on layer 4 (or 3). This way the VPS becomes a "dumb" relay and is only needed for connections from networks without ipv6. Networks with v6 take the direct path. You can even keep the source IPs intact by using something like proxy_protocol. Apalrd also has a video on this.
Now that I've gotten that off my chest I want to present you with some potential advantages advantages of IPv6:
There is also much more I want to talk about but I feel this is already way too long. I hope I could motivate at least someone to look into v6 themselves.
r/selfhosted • u/esiy0676 • 2h ago
Got this from bunny.net, perhaps a good reminder of risks when we incorporate CDNs into our stacks ... second this month.
Security update regarding one of our infrastructure providers
We're reaching out to inform you of a security incident involving one of our infrastructure providers, the steps we've taken, and what this means for you. This is separate from the incident we notified you about earlier this month and involves a different infrastructure provider in a different region.
What happened and how we responded
Yesterday, November 17, the infrastructure provider reported unauthorized access involving third-party server management software. One of our CDN nodes, located in Pakistan, was hosted on a server supplied by this provider.
Our engineering team took immediate action. The affected node had already been out of traffic rotation for over a week and was not actively serving requests due to ongoing maintenance related to regional network stability issues. Within 8 minutes of receiving the alert, we removed the server from our system entirely.
We then reviewed and preserved the relevant security logs for investigation, securely wiped the server, and revoked its access to our other systems. The affected server has been permanently removed from our infrastructure.
Our investigation confirmed that unauthorized SSH keys had been added to the server through the provider's virtualization layer. We found no evidence that these keys were used to access the server or perform any further actions. However, we cannot rule out the possibility that data was accessed or copied through the virtualization layer.
What this means for your data
While our investigation has not found evidence that customer data was accessed, we cannot completely rule out the possibility. If data was accessed, the potentially exposed information would have been: temporarily cached CDN content, Pull Zone configurations, and TLS certificates stored on that server.
As an additional precaution, we have revoked and reissued all TLS certificates for bunny.net platform domains (b-cdn.net and bunny.run). We are reissuing managed TLS certificates for custom domains and expect to complete the process within the next 24 hours. No action is required from customers using managed certificates. We will post a further update on our status page once this process is complete.
If you manage your own TLS certificates, we recommend revoking and reissuing them with new private keys as a precaution. No other customer data, including bunny.net account data, was stored on the server in question, and no internal systems were affected.
What happens next
At this stage, we are continuing to monitor our infrastructure closely and collaborating with the affected provider. Should any new findings affect our customers, we will provide an update via email and on our status page.
Following two security incidents involving separate infrastructure providers in recent weeks, we are taking additional steps to reduce our exposure to third-party infrastructure risks.
We are reviewing our reliance on third-party cloud platforms, which currently host a small portion of our CDN, and taking steps to reduce that reliance. The affected servers have already been removed from service and permanently decommissioned. We have also begun transitioning additional cloud-hosted locations and will continue evaluating the remaining environments to identify opportunities to further strengthen our infrastructure security.
We remain committed to continuously strengthening the security and reliability of our infrastructure.
If you have any questions or need assistance with managing your TLS certificates, our support team will be happy to help.
r/selfhosted • u/fpodunedin • 3h ago
Hey everyone - been a OneNote user for years on my 2-in-1 laptop.
Main use case is as a university student annotating pdfs of lecture slides and writing out assignment answers to math homework.
I really really hate the OneNote drawing experience and want to move to literally anything else.
The only thing holding me back is that all my notes so far are in OneNote and sync to my education provider's OneDrive which is really handy for easy and secure backups.
I do also run a self-hosted server at home, and so I'm happy to run some sort of syncthing or proper setup via cronjob if anyone has a good workflow.
TLDR: need better app than OneNote for uni student with drawing capability and cloud sync.
r/selfhosted • u/asdf14396 • 15h ago
I'm currently running a one-server setup (maybe someday it will be larger, but for now, computers cost money), but I'm not sure of how to easily access all the logs in there. By "access" I mean being able to take a quick look at something and see what's going on without having to SSH into the server and figure out which logging facility handles what I need.
I have just about the logs you'd expect: kernel logs, systemd service logs, Docker logs, the logs from the containers themselves (e.g., nginx), and probably a few text-based logs from one or two random things I have installed outside of containers.
What's the best way to concentrate these logs somewhere and easily check them and query them as needed?
A few things I'd need/want:
Thanks for any help or ideas!
r/selfhosted • u/HolidayYak3856 • 11h ago
Atrium is a free, open-source Android app to manage and monitor your self-hosted media stack from a single place.
It was built to pick up where LunaSea left off, with a focus on modern Flutter/Material 3, multi-instance support, and seamless local/remote routing.
The project recently crossed 300 stars on GitHub.
Feedback and Feature Requests are very welcome.
r/selfhosted • u/Left_Ad_8860 • 1d ago
Hey fellow selfhosted-gang,
Today I want to address a few words to the community regarding Paperless-AI and its repo health. As many of you know, there was a seriously long absence from me and the project itself. I want to reach out and explain what kept me from maintaining this project (in a TL;DR):
Mental health issues -> marriage -> first child born -> STRESS -> MORE STRESSED -> "Wait! Babys learn to walk! SUPER STRESSED! :D"
No, for real - time to program was rare, and I valued the time on the couch over maintaining this project. But in early January 2026, I got on the community Discord and announced that I would rewrite the entire codebase, as it had become a critical, unmaintainable spaghetti mess over time. At first, I was super confident I could deliver the final product quite early, but as time flew by, I realized this was much more work than I could handle in a few evenings.
So, long story short - I used AI more frequently this time to help release a working and modern solution. But even with the help of AI, it took months of manual coding, prompting and debugging.
By the time I was done and ready to release, a MAJOR security flaw was found in the old versions (≤ 3.x) that led to a CVE score of 9.8. Just days before I wanted to release the new version. Thanks again to the reporter of this security issue <3 I never thought that one of my projects would become so widely used (over 7.5 million downloads over the years) that threat actors would exploit this flaw out in the wild. Literally, it never crossed my mind... I learned my lesson.
That was the tipping point to release the new version ASAP. So here we go -> Version 4 is out now.
Is Paperless-AI even necassry nowadays?
I would say so, yes! I was usure the whole rewriting process with the upcoming release of paperless-ngx v3 and it's included AI features. But after testing it I was keen that a seperate solution will fit better for most people. Me personally - It really disappointed me big time.
What is the benefit over paperless-ngx (AI integration), paperless-gpt, zettelrobbe (fork of paperless-ai) and other fellow competitors?
It depends – they all have their reason to exist. ;)
What's new in 4.1
clusterzx/paperless-ai:latest-cuda for NVIDIA GPUs (CUDA 13, driver ≥ 580, falls back to the CPU). latest stays the small CPU image for amd64 and arm64.Prompt wizard: answer a few questions instead of writing a prompt yourself:
What's new in 4.0 (in case you missed it)
Ask your archive (RAG), rebuilt:
.env editing and container restarts.Processing:
Link to GitHub:
https://github.com/clusterzx/paperless-ai
Cheers, Clusterzx
r/selfhosted • u/Separate_Recover4187 • 3h ago
Does anyone have a method they use to automate bringing Albumoftheyear and RateYourMusic lists into Plex collections, including acquisition through Lidarr or some other acquisition engine?
I would like to be able to keep up with the releases in a certain genre, for example.
r/selfhosted • u/esiy0676 • 14h ago
Spoiler: There's to be SMTP gateway, but that's not my concern here.
Some years ago, JMAP was something I would mostly see as Fastmail obscure protocol, but we got RFCs (8620/8621 for core/emails as early as in 2019) since and now there seems to be a growing support for all kinds of servers and clients.
I wonder if anyone has purely JMAP-based setup that does not touch the outside world (see below) and is purely self-hosted. In other words, I would like my clients only connect to JMAP server (for both receiving & sending) and that JMAP server take care of the rest.
I have an SMTP inbound gateway which would pass (after filtering) incoming mails to the JMAP server and I have an SMTP relay that the JMAP server should use when sending out.
The inbound gateway is where I have flexibility (I am implementing it), in fact I could implement outbound (via other means than SMTP) as well, but I am not sure what best to pick to sit in the middle - preferably something that can be all in a container and just connect e.g. DB and S3 for blobs.
But anyhow, does anyone run such a setup, what JMAP server do you have in the middle, how do you connect it all? Best JMAP webmail to recommend? Any hiccups experienced with native JMAP clients?
Thanks!
r/selfhosted • u/ahorsenamedjeff • 1h ago
Howdy, setting up Caddy for the first time to run a reverse proxy for my Immich service. I have established the DNS names in my cloudflare account, and created my cloudflare token. I am getting the error below while attempting to start Caddy.
using adjacent CaddyfileError: adapting config using caddyfile: parsing caddyfile tokens for 'tls': getting module named 'dns.providers.cloudflare': module not registered: dns.providers.cloudflare, at Caddyfile:4
Below is my Caddyfile
photos.mydomainhere.com {reverse_proxy localhost:2283tls {dns cloudflare cloudflaretokenhere}}
r/selfhosted • u/Dinoisfly • 21h ago
Hi, i'm new here! I manage a retrogaming website and am currently hosting it on an M4 Mac Mini at home, with a 8TB SSD add-on and a 10Gbs line. I serve 140 TB/month. It is exposed only through Cloudflare with a tunnel. I am also using some Cloudflare features for caching and protection against bots. My issue is that even though i always quickly react to any DMCA request that Cloudflare forwards to me, i am still at risk of having them just close my account when they get tired of it so i'm looking for alternatives.
I only have a shared IPv4 so i can't directly expose my server to the world unless i go full IPv6. But having my private IP address exposed is also something i'd like to avoid. Are there cheap solutions for me? A basic VPS with at least 2Gbs unmetered maybe?
r/selfhosted • u/Virtual_Home1117 • 13h ago
I've been trying to play Xbox Remote Play at my dorm, but the Wi-Fi's been getting in the way (and I know it's the wifif since using cellular data on my phone causes it to work just fine). When I head back home, I am considering installing Tailscale on some device there to act as a subrouter (if my understanding of Tailscale is correct). Would that get around it?
r/selfhosted • u/australianwoe • 4h ago
I’m looking for a self-hosted setup that gives me what I liked about Readwise Reader. I want to browse newsletters and RSS feeds alongside a personal library of EPUBs and PDFs, and open any of them on my Mac or iPhone.
I’d subscribe via RSS where there’s a good feed and use a dedicated email address for email-only newsletters so they stay out of my main Gmail inbox. I also want a way to pull new issues and articles into a daily briefing on my own dashboard. The brief would summarize themes across sources and link back to the originals.
I’m looking at a dedicated IMAP mailbox → LetterFeed → Miniflux for newsletters and RSS. I’m open to pairing it with a separate library app if that works well across devices.
Has anyone settled on a setup they actually use day to day? I’m especially curious how you handle paid newsletters, links back to email-only issues, and syncing reading progress for EPUBs and PDFs.
r/selfhosted • u/Separate_Path4753 • 10h ago
Most self-hosted scheduling tools are meeting-link pages for people. Slotbase is a backend for booking anything: appointments, rooms, equipment, loading docks. One Docker image, your own MySQL, REST API.
It's a young alpha; I'd like to know what would make it easy to run for you (backups, config, health checks, upgrades).
r/selfhosted • u/Deer_Avenger • 4h ago
Almost 2 years ago I posted Econumo here, the budgeting app I’ve been building for my family since 2021. Since then:
That’s the short version. The rest is the story behind it, because I don’t want this to read like a changelog.

For years the backend was PHP + Symfony and the frontend was Vue. It worked fine. But the old stack began to feel like it was working against me. I’d also not updated most dependencies for about two years, and the thought of doing it made me put it off even longer.
So I moved everything to Go + React to make development with AI agents more efficient. That brought some joy and let me finally ship a few long-awaited features.
Importing transactions
Last time the most common request was CSV import, and the second was bank sync, so Econumo supports:
On top of that you can automatically enter transactions with Apple Pay via a Shortcut: it sends only the card name, merchant, amount and currency, never card numbers.
The world of software has changed a lot since the last post, so on top of the API Econumo supports MCP: you can literally chat with your finances, do some housekeeping or ask for analytics.

The demo is gone, but you can try it anyway
I removed the public demo to have fewer environments to maintain, and introduced a 45-day trial at https://app.econumo.com. Anyone who wants to try it still can.
Links:
Repo: https://github.com/econumo/econumo
Website: https://econumo.com/
User Guide: https://econumo.com/docs/user-guide/
What’s your favourite feature in the app you use for your budget?
r/selfhosted • u/Born2Die007 • 1h ago
Hey everyone! I'm the developer behind OfflineTunes, and I'm looking for a few people who would be interested in testing a new feature I've been working on for a while.
Ever since I started building OfflineTunes, I've had this idea of turning the phone itself into a music server. I built a custom RPC architecture over 4 years ago when i started working on this app with the intention of eventually allowing me to host my entire music library directly from my phone and access it from other devices.
The idea is that I can use my phone as my main source of audio files, and whenever I want to listen to my music on my PC, I can just connect to it through a browser. Eventually, I'd also like to aggregate all the different services and cloud storage providers where I have music stored so I can access everything in one place.
There are two different server modes:
Both modes support the visualizer. In Full Player Mode, you can trigger it directly from the desktop using your mouse, while in Playback Mode, you can trigger it from your phone.
How does it work?
The most basic use case is pretty straightforward. You start the music server on your phone, open the desktop client in your browser, and you have access to the music stored locally on your device.
But it goes beyond just streaming local files.
If you have music stored on cloud services like Dropbox, OneDrive, S3, WebDAV drives like Nextcloud, and other connected services, you can also access and stream those tracks directly through the browser. The phone basically acts as a proxy, streaming directly from those services rather than requiring you to download everything onto your phone first.
Note: For obvious DRM reasons, you can't stream music from your iPod/iTunes-synced tracks or Apple Music subscription. Those can only be listened to through the app itself.
This also works with Plex, Jellyfin, and Navidrome, although using the phone as a gateway for those services doesn't make quite as much sense since they're already hosted servers. It could still be useful if you want to quickly transfer tracks from those servers to your PC or want to host your local only self-hosted server so that it can be streamed remotely.
What can you do from the desktop?
It's not just a basic music player. The desktop client currently supports quite a few features:
FineTune Mode is actually one of the big reasons I wanted to build this feature.
I wanted to be able to finetune my music library while working on my desktop, without having to constantly switch back to my phone. FineTune Mode allows you to go through your music, filter out tracks you don't want, approve or reject songs, and organize everything into playlists or remove unwanted tracks from your library.
Having this available on the desktop means I can listen to music while working and clean up my library at the same time. It's something I personally wanted to use, and having it available through the server makes that workflow much more convenient.
Some of these features still need optimization, and the desktop experience currently uses the iPad view as its starting point. I'm gradually changing things to make it feel more like a proper desktop application rather than just an iPad interface running in a browser.
Note: EQ, gapless playback, bit-perfect audio, crossfade, Automix, and ReplayGain do not work in server mode and are unlikely to be supported in the future.
How do you connect?
There are currently two ways to connect your desktop to the phone.
I wouldn't recommend relying on the remote connection if you're on the same network, though, since it has additional costs and is slower than connecting directly through the local IP.
There is also an interesting part to the remote connection. Once connected through the website, you can grant permission to use the browser's Local Network API. This allows the desktop client to discover and use the phone's local IP address for streaming, which is much more performant.
The website also remembers your connected device. So the next time you start the server, you can simply select your phone from the device list and load the application.
The desktop client is a PWA, so you can install it as a desktop app and launch it directly. When everything works as expected, the entire process of opening the app, starting the server, and connecting to your desktop takes less than 20 seconds.
Why did I build this?
Personally, I want to use my phone as my main music source without having to maintain my own Plex, Navidrome, or Jellyfin server.
I've moved most of my music storage to Nextcloud, and I wanted a way to get the benefits of having a dedicated music server without actually having to host one.
One of the things I really wanted was to keep all my music activity in one place. Play counts, scrobbling, ratings, metadata editing, and everything else should work regardless of whether I'm listening from my phone or desktop.
For example, if I edit cover art or change a tag from the desktop client, the app can write those changes back to the original file in Nextcloud. This way, I'm not maintaining separate copies of my music or losing track of my listening history just because I'm using a different device.
Ultimately, I want to be able to pick up my phone, start the server, connect from my PC, and have access to my entire music library without needing another computer running in the background.
A few things about pricing and availability
Currently, this feature is available on iOS only, since that's where OfflineTunes is currently available. I'm slowly working on an Android port that will include the same features, but that takes time. Once that's ready, the music server should work on Android as well.
If you're using the free version of the app, you can watch an ad to unlock a 45-minute session on the Player Server.
If you're interested in testing it for longer or want to experience the feature without session limitations, just reach out to me. I'm happy to help extend your free testing access so you don't have to pay just to test this feature in its fullest.
One thing worth mentioning is that audio conversion and tag editing are not available on the server for free users. Unlike the mobile app, where these features are available through ads, implementing ads in a desktop browser environment opens up a whole other level of complexity that I don't want to get into while this feature is still experimental.
What needs work?
This is still very experimental, and there are quite a few things that need improvement.
I'm sharing this because I'd really appreciate having some people test it out and give me feedback. I'm particularly interested in hearing how it performs with different music libraries, cloud storage providers, and network configurations.
I'm not just looking for people to try the player, but also people who might have ideas about how this kind of setup could be improved.
If you're interested in testing it, let me know! I'd really appreciate any feedback, suggestions, or guidance that could help me improve this.
Thanks!
P.S. All the thoughts, ideas, and words in this post are my own. ChatGPT helped me organize and rewrite them, as well as fix spelling and grammar mistakes since English isn't my primary language. I wanted to make that clear!
DM me if you are interested!
r/selfhosted • u/marvinvr_ch • 11h ago
Hey all, Dusk 1.8 is out! Most of it comes straight from what you asked for in the last threads here. :)
What's new
Plus AV1, landscape playback with orientation lock on, and a lot of Apple TV polish.
Thank you ❤️
Dusk is free and open source, with no ads and every feature available to everyone. The only thing that pays for it is people choosing to support it through the app, so thanks to everyone who does.
If something is broken or feels off, tell me here, on GitHub or in r/DuskPlayer. I read all of it.
r/selfhosted • u/Monoyo- • 2h ago
looking for a way to keep a simple personal blog on a home server, instead of paying for squarespace or wordpress.com. not trying to build a big magazine site, just a place to publish posts.
writefreely is a relatively light markdown publishing platform, and they have official docs for running your own instance
ghost is more of a modern blog style setup, and they document a self hosted install
wordpress is the familiar one if you host it yourself, lots of themes and plugins, though it is heavier than the other two
has anyone here run one of these at home for a personal blog, or is there a reason to pick one over the others?
r/selfhosted • u/Monoyo- • 1d ago
looking for a way to keep household how-tos, manuals and shared notes on a home server, instead of leaving them in notion or google docs. not trying to build a big company knowledge base, just a simple place a family can actually find things.
bookstack is organized more like shelves and books, with a pretty straightforward web editor
dokuwiki is older and simpler, it stores pages as files, so it is relatively light if you just want a household wiki
docmost is a more recent option with a block style editor, closer to the notion layout if that is what people are used to
has anyone here run one of these at home, or is there a reason to pick one over the others for family docs?
r/selfhosted • u/MajorDifficulty • 9h ago
I'm the developer! In July I posted OPDSy here, an Android reader for self-hosted libraries and i've got some major updates. It is now on iPhone and iPad as well ive matched the price at £3.99 on the App Store, with no account, no ads, no telemetry and no server of mine in the middle.
Since that post it has had about 80 more releases (122 in total since June, 10 in the last month), and it holds a 5.0* rating on Google Play from 19 reviews.
What it does:
Things i'm working on right now,
- Android Auto support, i'm in the build and test phase so far. I have aspirations to also support apple car play, but from what im reading its a bit trickier.
iPhone: https://apps.apple.com/app/opdsy/id6827915459
Android: https://play.google.com/store/apps/details?id=com.opdsy
I would love any feedback the community has, a lot of the features are born out of user feedback and support emails that I get from my users.
r/selfhosted • u/_BadFella_ • 1d ago
Pinchflat-ngx is a self-hosted YouTube archiver powered by yt-dlp. It lets you download channels, playlists, and individual videos, organize your library, and automatically download new uploads through a web interface.
Being a developer, I started this as a personal fork to fix things I ran into while using Pinchflat every day. I wasn’t expecting to maintain it this far, but other people started using it, and it’s become a passion project.
It began as a fork of a fork. Since then, there have been hundreds of commits covering fixes, new features, and day-to-day improvements. There are still rough edges, and fixing them has meant more late nights than I expected. I plan to keep maintaining it, with the focus on stability and a more manageable release pace.
I know fellow self-hosters like to look under the hood, so security reviews and constructive criticism are welcome in the comments. I’ll take them as useful feedback, not a personal attack. If another YouTube downloader hasn’t worked for your setup, or there’s a feature you’re missing, let’s discuss it.
There’s no Discord for now; keeping up with GitHub issues and discussions is already plenty of work. If more people get involved and a few want to help maintain it, I’d love to keep building this together.
Some of the additions:
There’s a comparison with upstream and more detail in the wiki feature guides.
GitHub · Installation · Migration from Pinchflat
If you still use Pinchflat, I’d love for you to try it. Back up your config before migrating, and please report any problems.
There’s also a YouTube video about the project, plus coverage from XDA, noted.lol, selfh.st, and jacar.es.
Contributions are welcome. If something bugs you every day, open an issue or send a PR. It’s becoming a lot for one person, and I’d appreciate the help.
Development includes AI assistance. I review and test changes, and issues.