r/sharpening • • 3h ago

New sharpness test method unlocked

Thumbnail x.com
3 Upvotes

r/sharpening • • 3h ago

Question The right wet stone

Thumbnail
gallery
4 Upvotes

Hi there! I am new to this and got these two stones. My Japanese knives are a bit dull, so I'd like to know if the tsubarashi is good enough to sharpen my knives, or if I should use the other stone first? And also, do I need to soak them? I searched a bit and I haven't really sharpened my knives since I got them from Japan. The one next to global-ist is 3 years old and the blade is a bit broken (an ex roommate did this), but I still use it often to cook. Global-ist is one years old and the other one 6 months old. The deboning knife I got it from my last trip to Okinawa in April. I cook with them often and want to take care of them properly. Should I buy a 600/1000 to resharpen them properly, or get a 1000/3000 instead? Thanks!


r/sharpening • • 3h ago

Question Do people actually soak their splash and go before first use(also new stone \0/ )

Post image
2 Upvotes

i have gotten a few sharpton now (rockstar and pro)

and everyone of their instruction sheet says to soak 5-6 mins before first use i heard it makes the surface softer abit?

Does anyone actually do it any reason why you would want a softer surface to work on?


r/sharpening • • 7h ago

How i regrind and sharpen a new axe for felling and chopping work

9 Upvotes

This is a quick intro to the process of getting a new axe ready for serious work. Almost all modern axes, even premium brands come with handles that are far too thick. Thinning down an axe handle to dimensions closer to old logging axes greatly improves felt shock, allowing ypu to chop longer and reduce tendonitis long term.

Most axes also come with a rough grind, not one suited to getting good penetration and release from the wood, a fairly flat 20 degree grind with a rolled or secondary bevel at the edge gets more bite but still is tough enough for knots. For extreme cold conditions you need a thicker grind but generally 20 is a good standard. Do not file off the 'speed bump', the transition between primary grind and the axe cheeks, this greatly reduces the axe stickiness but its commonly assumed smoothing that transition will help the axe perform but the opposite is true

With the right tools its quite a fast process but you can do it with just a couple of files and a rasp or scraper, but a spokeshave and belt sander speed it up immensely.


r/sharpening • • 7h ago

Question Can someone explain how and why do these things work?

Thumbnail
gallery
49 Upvotes

I actually have a honing rod, and usually use it before stropping, but I always wanted to know how do these even work. I mean, sure, it "hones" the edge, but do they remove the burr, or just straighten it out? The ceramic rod is considered "abrasive", I think, but the metal one just has these cut-out slots that... cut? I think its like sanding paper and a file.

Just as any other honing tool, the sharper your knife is, the better result you're gonna get after using this, but isn't it going to round over the edges after a while of honing and not sharpening? Someone please help.


r/sharpening • • 8h ago

Question Hello everyone!

Post image
2 Upvotes

Is this a good deal? And is it a good system to start learning the art of sharpening on? 🫣😂


r/sharpening • • 8h ago

Question Thinning knife on sandpaper is possible?

2 Upvotes

Hi everyone, is possible to thin a knife on sandpaper?

If yes how can it be done? I'm thinking of thin 1 or 2 knife that are a bit too much thick behind the edge and don't cut as much as I want, especially in dense ingredients.

Thanks for your help 🙏


r/sharpening • • 9h ago

Showcase I Credit this Sub with my Continued Growth

40 Upvotes

Seriously. This sub is harsh, but it's fair. To that I can attest.

Few places on the internet actually drive you to become better and I've only made a few posts here and within those comments I always found where I could improve.

And I'm still improving - one day I may even produce edges worth bragging to y'all about!

WE Knives Trogon - 20CV

Civivi NUGZ - 14C28N


r/sharpening • • 10h ago

Question Tips/ Advice on Sharpening for Newbs

Post image
6 Upvotes

I’m actually not sure if I’m sharpening my knives correctly. I basically pick a low angle that I can decently hold and sharpen my knives free hand and I always end up with a very wide cutting edge. I have never seen any photos posted in this sub or other knife forums of their knives with this kind of ugly wide Koba. I mean my knives are practically sharp and I’m actually happy with it but yeah the wide cutting edge is just bugging me and I really want to improve. What am I doing wrong here and how can I improve my sharpening skills. Thanks and I appreciate all help/ advice I can get!


r/sharpening • • 13h ago

Last grit# when sharpening beauty shears.

2 Upvotes

I been sharpening beauty shears for a week now (yes I got formal training). I was taught to end it at 2000 grit when polish/debuff but when I give it to a barber I work with he grabs a massive chunk of hair and it keeps pushing at the tip. I was wondering if I should end it at 1000 or even lower.


r/sharpening • • 15h ago

Question I messed up. What can I do to fix these blade edges?

Thumbnail
gallery
17 Upvotes

I was an idiot and left my Shun knives in soapy water overnight after butchering a deer. I didn't cut into any bone with them or anything, just trimming quarters and processing into steaks and roasts. Used my hunting knife for the harder work around bones and joints. I was tired, and figured since they are stainless(?) they would be fine. I didn't leave them in a full sink, and the handles weren't submerged. I always thought the main reason to not soak knives was safety and handle preservation, and figured that pitting/corrosion like this wouldn't happen that quickly.

But these are some nasty burrs/pits regardless, and I want to fix it. I love these knives, and apparently I'm just dumb sometimes. Is this fixable with amateur at home sharpening, or is this a professional job?


r/sharpening • • 15h ago

Question Need help

3 Upvotes

Sharpening for the first time and a burr is not forming the entire blade lenght any advice?


r/sharpening • • 16h ago

Question Recommended way to sharpen very small chisels?

Post image
10 Upvotes

I’m looking to sharpen some very small chisels. The smallest chisels are 3mm wide and less than 1mm thick. What would you use to sharpen something that size?

I’m very new to all this and want to make sure I go about it right. I’m worried that the same kind of whetstone you use for a knife would not be suitable for something less than 1mm thick, though I assume it would be fine for the ones that are a bit thicker.


r/sharpening • • 19h ago

Getting Ready For Hunting Season.

Thumbnail
gallery
39 Upvotes

I just put a razor edge on my BK62 Kephart getting ready for white tail on Saturday.

Why a mirror edge for dressing a deer?

Why Not?

Any spooge you see on blade is just diamond paste, the blade is hair whittling sharp!


r/sharpening • • 20h ago

How did you learn how to thin? Is it worth it?

8 Upvotes

Through all the practicing i’ve done, i’ve ended up with a knife really thick behind the edge. I figured it’s a good chance to learn how to thin (don’t care about the knife).

Watched some videos, gave it a try. I was not successful and clearly have no clue what i’m doing.

Am I over thinking it? Does anyone have any good resources to share? Is it worth learning, or should I just pay for a service? I feel like i’ll always just ruin knives trying to do this lol.


r/sharpening • • 20h ago

Best Buyer’s Guide Books???

1 Upvotes

I’m looking for a book that has all of the new steels included in it that tell you the best heat treats to look for and optimal target HRC’s for all the steels currently available (or close to it of course as it constantly changes). If anyone has some books they go to when looking to buy knives, I’d love to hear about it. This is the community I most frequent so I figured I’d post it here!


r/sharpening • • 21h ago

Showcase Hair whittleing sharp on cheap Chinese diamond paste

18 Upvotes

The strop was 9$ and the paste was 3.5$ on aliexpress. I'm pretty impressed you can get this result this cheaply.


r/sharpening • • 1d ago

Question [question] Diamond plate usage

3 Upvotes

What are you guys using to wipe down your diamond plate mid-sharpening? I’m not referring to cleaning in between sharpenings. as an eraser seems to work fairly well. I’m specifically referring to when re-profiling or sharpening, wiping off the built-up metal as you go. I see a lot of people using a little bit of soap and water and then just wipe it with a paper towel. The soap and water works great but anything I use seems to just shred all over the stone, no matter what grit I’m using. Paper towel just leaves pieces everywhere. and even most rags leave a bunch of lint both of which I feel during the sharpening feedback. Just seeing if this is just normal or if I should try a different type of cloth or maybe even a better paper towel brand? Feedback appreciated!


r/sharpening • • 1d ago

Whetstone set for Christmas gift

5 Upvotes

Hi all!

I know there's a few post with suggestions already but since I know nothing about the topic I thought I'd ask for a bit more specific help.

I'm thinking of getting a sharpening set for my brother in law this Christmas. He used to be a cook but now only does it at home as a hobby. I don't think he's ever done any whetstone sharpening, but I think it might be something he enjoys.

Since he has no experience and no sharpening tools, I'd have to get a full set of whetstone and holder, but the top price set for our gifts is $50. Am I going to find something good at this price point or will I end up only getting cheap things that will break in no time or be frustrating to use?


r/sharpening • • 1d ago

Question Ok gents. For all you wet shavers out there, who hone their own straight razors, what is your favorite " finisher" for your straight razors? 2nd part of the question. If you could choose between a Nakayama, Shoubudani or an Ozuku? Which would you choose and why?

7 Upvotes

r/sharpening • • 1d ago

Question How would you go about sharpening a seam ripper?

Post image
39 Upvotes

My trusty old clover, I would prefer to sharpen than to keep buying new ones. It's a little tricky due to the shape, has anyone done this before?


r/sharpening • • 1d ago

Question Miyabi stones

Thumbnail
gallery
13 Upvotes

Hi Reddit,

I came across these 3 stones while clearing out a house.

I have no use for them, so I’d like to sell them, but I have no idea what the 10,000-grit and 3,000-grit stones are worth (they are practically brand new).

Are they identical to the Naniwas?

Could anyone provide an estimate?

Thanks!


r/sharpening • • 2d ago

small scratches on blade when polishing on my last stone

2 Upvotes

im receiving some scratches on my knife when im polishing on my morihei hishiboshi #8000 but aren't on my naniwa advanced 5k for my pre polishing. the scratches are all ways moving around and never stay in the same spot. would love any help trying to make the finish look as smooth as posible.


r/sharpening • • 2d ago

My knife steers right, how do i fix it?

2 Upvotes

I have a CCK 1303 vegetable cleaver. I use the knife daily and occasionally thin it and sharpen it by hand on stones.

Lately the knife seems to drift to the right while slicing things like carrots and dense bread. I would say the primary grind on the left side is slightly thicker and more convex. It’s kinda been that way since new.

I can’t find much on AI or the net on what to do so I thought I’d try here. Any suggestions?