Even though I had some experience with woodworking almost every stage of this project posed a challenge. I used 35*95mm spruce boards. I came from Playseat Challenge X and this is a night and day difference! It even feels like I've gained some free pace!
I was wondering between getting a new wheel or getting a new curved monitor, probably around 34 inch, but I’m not sure as the space is only one meter wide
Hey all, I've been building a small launcher called Sim-QVFR. It sets up quad view foveated rendering for a few sims in VR, you probably saw my original post for Assetto Corsa Evo a few weeks back after Dan Suzuki released his. Right now the games I support are Le Mans Ultimate, Assetto Corsa EVO, ACC, American Truck Sim(experimental), Euro Truck Sim 2(experimental) and X-Plane 12.
I'm sharing it in case it's useful to someone. No pressure either way, it's open-source, free, and features are all driven by the communities feedback.
What is QVFR?
It renders the spot you're looking at sharp and the periphery at lower res, so the GPU does a lot less work.
How is this different from VRS / "Dynamic Foveated Rendering"?
A lot of games call their built-in option foveated rendering, but it's usually variable rate shading (VRS). The two work differently:
VRS changes how pixels get shaded. Each eye still renders at full resolution. The edges just get shaded more coarsely, for example one color for every 2x2 block of pixels. You still have every pixel, but some share a color. In my testing that saved about 10-15%.
QVFR changes how many pixels get rendered. The periphery renders at a lower resolution, and only the area you're looking at gets full detail. With my default settings, each eye renders roughly a quarter of the pixels of a full-res eye.
So VRS saves on shading only. QVFR renders fewer pixels from the start, so the savings apply to the whole frame.
My test
Le Mans Ultimate on an RTX 5070 Ti, 5800X3D and Pimax Dream Air at 90 Hz. Stock is native at 4984 × 4088 per eye. Periphery was 15% and focus 150% with 20%x20% fovea size.
Trade-offs
The periphery is much softer than native.
There was one hitch in the QVFR run, with a worst frame of 119 ms. I was recording when I was already pushing my machine so it's possible it's due to that.
Your results will depend on your headset and settings.
What about playing online?
This isn't an approved tool for any of these games, so use it online at your own risk. I've tried to keep it as non-invasive as I can:
The app is signed.
In Le Mans Ultimate and Assetto Corsa Evo it doesn't modify game code or memory at runtime. I removed the parts of the method that did that. ACC is pending this improvement
It works as a D3D11 layer instead.
It sits between the game and the graphics API, takes the rendered views, and hands the new stereo views to the XR runtime. That said, I can't promise how any game's anti-cheat will treat it.
CPU Performance:
Multi-view rendering (LMU) QVFR draws four views per frame (an eye view and a focus view for each eye), and LMU was running its whole scene pass for every one of them, which costs a lot of CPU. Sim-QVFR now uses multi-view rendering so each eye's pass draws its focus view at the same time, and the game only walks its scene twice, like normal VR. It uses NVIDIA's MVR on RTX 20-series and newer, and a software version (SMVR) on AMD, Intel and older NVIDIA cards, all at the D3D11 level with no game code patched. On my RTX 5070 Ti, NVIDIA's MVR saved about 1.8 ms of CPU per frame (2.1 ms with no FOV crop), and GPU time dropped from 9.5 ms to 7.2 ms. Software MVR works out to roughly 1.5 ms less CPU (calculated from my runs, not measured directly). At 90 Hz you only get about 11.1 ms per frame, so that's a big share of the budget. These numbers are from one machine and aren't a promise. Multi-view is on by default for LMU, and the overlay shows whether you're on MVR or SMVR.
What other features are there?
Upscaling and image quality:
Foveated DLSS
Foveated FSR 3.1
CAS sharpening
View:
FOV cropping
Helmet mod. 3D-modeled helmets are planned.
Overlays and settings:
Performance overlay
Local time overlay
In-game settings menu. Changes apply live, so you don't need to restart.
How it was made
For transparency: I'm a software developer by trade, and I built this with heavy use of Claude Code. I directed the implementation, and tested everything in the headset. AI tools are what let me build things like this in my free time, and I'd rather be upfront about it.
It's still in beta so expect bugs, I'm actively working on them to solve and if you're a dev or just interested in working on it, feel free to fork the repo, make your modifications and make a pull requests. Happy to answer questions or hear what breaks.
I have a Moza r5 wheel, I just started simracing about a month ago. After doing some research and buying another set of pedals, I guess I'm going to replace the wheel as well, I'm looking at the simagic alpha evo 12nm and the Asetek LA Prima 12nm bases and wheels. Does anyone have experience with these? Any other recommendations are welcome as well.
I want to learn to do heel and toe and blip the throttle and everything just cuz I think it's cool.
However not only does iracing already allow auto throttle blip apparently :...c but it surely can't gain THAT much time because for my preferences at least I'm never going THAT hard on throttle straight after braking.
So is there some sim or car in sim racing with a giant turbo where I could learn to do this and be rewarded for it?
After starting with sim racing in 2005 with gt4 and the great logitech Driving force GT, and switching to the G25 and gt5/6 , i stopped sim racing for many years.
But six months ago, i bought the R3 Bundle, and got back to it.
Dispite the 3.9 nm , the step up ,being a DD base, is huge when compared to belt/gear bases.
And after about a month of fine tuning with moza pit house, the r3 has been great, lots of detail in AC Evo and OG Assetto Corsa.
The clipping exists tough, so i wonder about the diference compared to a R9 or R12, that will be the next investment for me.
The ES wheel has decent quality but the 12 inch rim is definetly worth, much more realistic size, and nice leather quality rim.
The srp lite pedals were okish in stock form, but with the brake upgrade kit and phf haptics on the brake and throttle pedal, they became very diferent , and very much usable.
I'm seriously torn between buying the DD Pro, RS50, or G Pro Wheel right now. I'm planning to start with the 5N version of the DD Pro and upgrade to the 8N later. I'm planning to use it with the PS5, so I'd like some advice on which one is best, considering overall performance—like responsiveness and power.
Before I begin, please be informed that I am (as well as other brands) a VRS affiliate and received the VRS G2 pedals free in exchange for review, which is in the works. I always recommend waiting for a full review, but you can read my comments below if you're desperate to hear an early verdict.
I LOVED the original VRS pedals and used them as my preferred performance set since I received them in 2024 (also received free in exchange for review). I've been a VRS affiliate since then, but those that watched my DFP15 and GT-2 review know that this doesn't mean a free pass for criticism and negatives are highlighted.
For reference (because someone always wonders when we talk performance), I'm 4K+ on iRacing.
A full review is underway, but here are the main bullet points of where I'm at.
- The VRS G2 pedals are as smooth (if not a teeny teeny bit smoother) than the original V1 pedals. This was my primary concern because this is the one big quality I loved most about the V1. I feared that the G2 would somehow fumble this and lose the very thing that made the V1's legendary. The G2 doesn't mess with the formula and provides a crystal clear, glassy smooth pedal travel that feels zero friction and tremendously repeatable and consistent. In other words, eSports grade reliable clarity. On that basis, I was pretty happy - everything else is a bonus.
- I haven't tested the dampers yet. I don't consider them necessary for best performance as I believe the standard arrangement to be as good as it gets - but I can appreciate that some folks will consider them a driver aid to help regulate pedal movement. I had a throttle pedal damper on my Fanatec V3's back in the day, I get it. However, if your ergonomics and positioning are correct and you're acclimatised to things, you won't feel the need for dampers. It's gonna be a personal preference - if you don't know if you need the dampers, that means you don't need the dampers.
- I've tested both the standard and 'elite' pedal faces WITH SHOES. Both are decent, but the 'elite' faces don't really offer any further grip or performance over the standard faces. They're good enough as-is and the elite pedal faces should be considered strictly cosmetic.
- I haven't tested the haptic motor add-ons as I don't currently have them in my possession.
- If you're using V1's right now, it's pretty much just a sidegrade and only the most invested should make that jump. For the rest of you that never fancied the original VRS pedals due to the slightly odd aesthetics (that's partly why it took me longer than it should have to be interested in them) then the G2 pedals seem to be a very worthy heir to the VRS reputation. They are essentially the V1 pedals in a brand new set of clothes, same underlying characteristics which in my book is a good thing.
They're my headline thoughts for now. If you absolutely cannot wait, there is a discount available for VRS which is applicable to the current sale price, I won't link the discount here directly, but you will find a '5% Off VRS' link at the top of dannylee.co.uk/course
I’m looking to upgrade from thrustmaster t300 rs gt to a moza r9 but not sure what to get cos money is kinda tight I could either get a moza r9 v2 for £200 on Cex B condition with 5yr gaurentee or I get a brand new moza r9 v3 for £350 cos even though the base is on Black Friday for £250 I can’t buy it now cos I don’t get payed and it will be a Christmas present from family, so what do you suggest?
I have a sim to connect it to.
And I’m 18 so don’t need to spend the money on something else for those saying it’s not worth it cos it’s a Christmas present
I'm looking for head straps (they can't be that bulky because of my seat), and really anything else to make it more comfortable. It's honestly quite heavy and gets pretty uncomfortable. I really don't have a spending limit as long as it's not more than the headset itself.
Full wheel compatibility and an awesome game altogether.
It is incredibly hard to get started with the base truck but completely worth the struggles if you are looking for a Monster Truck Driving experience with wheel on PS5!
I'm trying to decide between the NRG Innovations Ultra and the Trak Racer TRS seat. I’ve got a Sensit haptic insert, so I’m looking for whichever works better with that. Both seem solid, and I'm currently using a cheap TK Corsa seat. The TRS is a bit pricier, but does anyone have experience with either of these? I’m sticking to these two since the haptic insert sits flush in them.
I'm putting together my first proper sim rig, a SimXPro GT-RS, and found this old Genesis gaming chair in my garage. Figured I'd give it a try before spending money on a proper seat.
The seat itself feels pretty solid, and the backrest barely moves, even when I push against it quite hard.
My main concern is that the seat base is almost completely flat. I'm 191 cm (6'3") and around 118 kg (260 lbs), and I'm wondering if that might get uncomfortable during longer racing sessions, especially when braking.
I'd ideally like to tilt the whole seat back slightly, raising the front by a few centimetres, but I'm not sure how to do that properly with the mounting points on the GT-RS.
I've attached a picture of the underside as well. There are several threaded mounting holes from the original chair mechanism.
Has anyone mounted a similar gaming chair to an aluminium profile rig?
How would you secure it properly, and is there a simple way to add a bit of seat tilt? I was thinking about using some angled brackets or spacers, but I'm open to better ideas.
I'm using Simagic P700 pedals, so I'd like the seat to stay completely solid under braking.
Not expecting it to be perfect, just hoping to make use of something I already have for free.
I'm trying to build my own 4080 aluminum rig for my Simagic Alpha EVO (12Nm) and MOZA CRP2 pedals. Does anyone have any drawings, CAD files, or measurements they used? Also wondering if I should grab the MB-S side mounts or just bolt it from the bottom.
I wondered if it is possible and if possible any cons of rotating the mounts on the pedals to get slimmer mounts so it fits the mounting holes, reason i am doing this is because when i mounted it with the baseplate from simsonn the plate flexed quite a bit in the middle therefore i thought it would be better to mount them directly on the rig baseplate?
Hey, I received this RS Shifter & Handbrake for free from Logitech, and it makes a strange noise when I move the lever back and forth in the shifter mode (see video). I can also feel a click or slight catching through the lever as I move it, so it’s not just the noise.
Does yours sound like this too, or could mine be faulty?