Sometimes I think there is only one pet soul, made of infinite love, that gets to spend some time in different bodies. It moves from one to another, unlimited by the constraints of time and space. Peeta was one such incarnation. She wasn't my dog, but she didn't know that.
I started with a really great model of a sleeping Labrador I found on Cults, and primed it using filler primer. I used some XPS foam I had as a base and shaped it into a plinth, and made a name badge and a flower.
I then gave it a couple coats of Mod Podge to seal the surface, packed air dry clay into any severe under hangs and closed loops in the model. I then coated it with multiple layers of Rebound25 silicone, some thickened with thixo to fill in overhangs and negative spaces.
I made a mother mold out of plaster of paris and burlap strips, then demolded the model carefully. The parts under the neck and around the belly were very hard to free, but came out with minimal tearing of the silicone.
I mixed up some Cement-All, and filled the mold, trying to get any entrained air pockets out and vibrating the whole model with a sawzall get as many bubbles out as possible. I was surprised at just how hot curing cement can be, it easily hit 130⁰F/55⁰C.
Final demolding was done and I couldn't be happier with how it came out. There are some minor flaws, I think there was a thin bubble in the silicone that collapsed during filling and made one of the paws a bit wonky, and there are some small air bubbles, but for a first try I am thrilled.
I had fun making this and learning a new skill. I'd love any tips you guys might have for silicon mold making and casting.