r/synology • • 20d ago

NAS Apps Guidelines on the ransomware attacks

263 Upvotes

Synology released the following statement following the attacks:

Synology Product Security Incident Response Team (PSIRT) has confirmed that the impact of the recently disclosed PHP2Shell vulnerabilities (CVE-2026-109618 and CVE-2026-109619) is limited to systems running certain PHP-dependent packages. The affected packages are Calendar, IDrive1, Joomla, KodExplorer, MailStation, MediaWiki, phpMyAdmin, vtigerCRM, Web Station, and WordPress.

Synology has released PHP security updates on DiskStation Manager (DSM) 7.4 and DSM 7.3, as well as the end-of-life DSM 7.2, DSM 7.1, DSM 7.0 and DSM 6.2. Users of the affected packages are strongly advised to update PHP through Package Center immediately. Once the PHP update is complete, dependent packages restart automatically2 and the vulnerabilities are resolved. For systems running DSM versions earlier than 6.2, Synology recommends temporarily disabling the affected packages to mitigate risk before updating to a supported DSM version.

Another (different) advisory is available on this link

https://www.synology.com/en-global/security/advisory/Synology_SA_26_14

So it seems all the current ransomware attacks are caused by outdated software on the NAS. For software that is no longer supported they released patches nonetheless. Update ASAP. If you NAS is no longer eligible for updates, disable all the packages that were mentioned and do not expose to the internet.

General guidelines about avoiding ransomware are:

  1. make sure that all your software is up to data (DSM and all software packages). Apply updates immediately when they become available.
  2. Also make sure your docker containers do not run any vulnerable software. Docker images that didn't get a recent update could be suspect.
  3. Evaluate if you really need to expose your NAS to the internet. Exposing your NAS means you allow direct access from the internet to the NAS through QuickConnect, port forwarding, DDNS, UPnP.
  4. Consider using a VPN (OpenVPN, Tailscale, ...) as the only way for remotely accessing your NAS. This is the most secure way but it's not suitable for every situation.
  5. Disable port forwarding on your router and/or UPnP. This will great reduce your chances of begin attacked. Only use port forwarding if you really know what you're doing and how to mitigate zero day attacks.
  6. Quickconnect is another way to remotely access your NAS. QC is a bit safer than port forwarding, but it still gives hackers access to your NAS without the need for passwords or MFA to exploit any vulnerabilities.

Further important guidelines:

  1. Enable IMMUTABLE snapshots if your system supports them. This will prevent the attackers from resetting your NAS after they encrypted your data. It will also protect your data.
  2. Always have some kind of offline backup. Any online backup could get compromised too, be it on a usb HDD and even a cloud based backup.

r/synology • • Dec 06 '23

Tutorial Everything you should know about your Synology

215 Upvotes

How do I protect my NAS against ransomware? How do I secure my NAS? Why should I enable snapshots? This thread will teach you this and other useful things every NAS owner should know.

Our Synology megathreads

Before you ask any question about RAM or HDDs for your Synology, please check the following megathreads: * The Synology RAM megathread I (locked but still valuable info) * The Synology RAM megathread II (current) * The Synology HDD megathread * The Synology NVMe SSD megathread * The Synology 3rd party NIC megathread

Tutorials and guides for everybody

How to protect your NAS from ransomware and other attacks. Something every Synology owner should read.

A Primer on Snapshots: what are they and why everybody should use them.

Advanced topics

How to add drives to your Synology compatibility list

Making disk hibernation work

Double your speed using SMB multichannel

Syncing iCloud photos to your NAS. Not in the traditional way using the photos app so not for everybody.

How to add a GPU to your synology. Certainly not for everybody and of course entirely at your own risk.

Just some fun stuff

Lego Synology. But does it actually work?

Blockstation. A lego rackstation

(work in progress ...)


r/synology • • 5h ago

DSM Unauthenticated RCE in NGINX with HTTP/2, likely affecting DSM itself, should probably disable HTTP/2 for now

Thumbnail
wiz.io
49 Upvotes

CVE-2026-123633 and CVE-2026-123007

Both have been in there for a long time, so probably many many old DSM versions affected. I think HTTP/2 is off by default in DSM, but I have no way to confirm this.

I'm so tired of this, just updated a bunch of docker containers this morning thanks to the Java Base64 RCE. This really is the darkest timeline.


r/synology • • 8h ago

NAS Apps I got tired of setting up NAS remote access in five different places, so I put Tailscale, NetBird, Cloudflare and IPv6 on one DSM page, and made DSM usable on a phone (free, open source, Syno Package Land)

Thumbnail
gallery
22 Upvotes

Every way into my NAS used to live somewhere different. Tailscale in its own app, a Cloudflare tunnel in the Cloudflare dashboard, QuickConnect and DDNS in Control Panel. They all worked, but I never had one place to see how my NAS can actually be reached from outside, and adding a new way meant another evening of reading docs.

So I built Syno Connect Center. It puts Tailscale, Headscale, NetBird, Cloudflare (a free link, a temporary address or your own domain) and IPv6 on one page in DSM, and QuickConnect and DDNS show up there too. A short wizard helps you pick one, connect, and choose which apps go out. The tunnel options don't need any port opened on your router.

It doesn't reinvent anything. It downloads the official cloudflared, Tailscale and NetBird programs, checks them before they run, and you can update them from the app as soon as a new version is out. It can even run your own NetBird server on the NAS, so you don't need a NetBird account or a VPS.

The part I use most is on my phone, though. Add /m to your NAS address and you get DSM's own apps laid out for a phone: menus behind a ☰, forms and tables that fit the screen, and a home page with CPU, memory, storage and notifications. It's the same DSM underneath, so it's your usual login, 2FA and permissions. Add it to your home screen and it opens like an app.

Some notes on security and privacy, since it's remote access:

  • Public links (Cloudflare, IPv6) put a DSM sign-in page on the internet. If only you need admin access, Tailscale or NetBird is the safer pick. Turn on 2-step verification and Auto Block first; the wizard asks you to.
  • It runs as its own package user, not root, and needs a DSM admin login to change connections.
  • No telemetry. Your traffic goes through the service you pick, never through a server of mine.
  • It's an unsigned third-party SPK, so DSM shows the usual warning on manual install. Still early (0.1.0), needs DSM 7.2+, tested on my DS420+.
  • Most of the code was written with AI. I did the design and the review, and every release goes through automated tests.

https://synopkgland.com/apps/SynoPkgConnect/

If something looks off on your phone or a connection gives you trouble, tell me here and I'll fix it.


r/synology • • 3h ago

NAS Apps Found a HUGE bug in Synology (Virtual Machine Manager / kernel)

7 Upvotes

This is the timeline, whenever I reboot the VM:, Yes I used AI to process the logs and explain it better.

TL DR; a bug in a kernel and qemu hangs 1 core, and then everything sent to that core piles up in a queue and ends up hanging the entire system.

  1. CPU 7 is stuck inside KVM. The VM's vCPU thread (CPU 0/KVM) is busy-waiting in wait_lapic_expire → __delay and never leaves. That code runs with interrupts disabled, so CPU 7 handles nothing else.

  2. The disk controller sends its completion interrupts to CPU 7. ahci0 has delivered most of its interrupts there, and right now every AHCI interrupt counter is frozen. The internal disks finish their writes, but nobody processes the "done" signal. That's why I found 13 writes stuck in flight on sata6/7/9/10.

  3. That stalls md0 (the DSM system) and volume1. btrfs can't commit, unwritten data piles up (500 MB and growing), and anything that writes blocks: postgres, DSM, SMB, logging.

  4. The VM's qemu main thread is also stuck on CPU 0 (soft lockup - CPU#0 stuck), waiting for CPU 7 to answer a TLB-flush request.

  5. Network interrupts go to other CPUs, so ping, TCP and SSH keep working. That's the "half alive" state you saw both times.

I think this matches a known KVM timer bug that later kernels fixed. When a guest resets, its virtual clock goes back to zero, but the old timer deadline is still set. KVM then busy-waits for the gap between the two, roughly as long as the VM had been running. DSM 7.3 still runs a 4.4 kernel without the fix. A VM reboot triggers it, which is why starting the VM was fine at 08:56 and 11:14.

For now the only solution is NOT to reboot the machine. not from menu, not from inside the VM. Shutdown, wait and start it works.

This happened with the OVA import of Home Assistant (latest)

I submitted a report so Synology, maybe I'm lucky and they take a look


r/synology • • 5h ago

NAS Apps Synology Drive Client TCP 6690 to CF

1 Upvotes

I am looking for a way to use my own domain via Cloudflare to redirect traffic for the Synology Drive client from TCP port 6690 to port 443.

I already handle services like websites by using subdomains with Cloudflare DNS proxying (which hides my IP address), with traffic then routed to Nginx Proxy Manager—this works perfectly. My question is: how can I redirect and mask TCP port 6690, which is used by the Synology Drive client application on Windows?


r/synology • • 7h ago

NAS Apps Weird permissions issue with Download Station

1 Upvotes

Hi folks,

I'm experiencing a weird permissions issue, I believe it started a few updates ago, so probably with DSM 7.1.

Basically, I download files via Download Station, and once completed I move them manually using File Station into a different folder.

I mount those folders to my jellyfin lxc via NFS (mounted on the proxmox host). But when I try to play any of the files I've downloaded recently it just fails. Looking at the filesystem permissions from one of the servers, it seems fine, both user and group have read permissions: (jellyfin user is member of the lxc_shares group)

root@jellyfin# ls -al
total 3832412
drwxrwx---  2 root lxc_shares          0 Mar 19  2026  .
drwxrwx---  2 root lxc_shares          0 Aug 17 22:28  ..
-r-xr-x---? 1 root lxc_shares 3924386453 Mar 18  2026 "example.mp4"

But the file can't be accessed:

root@jellyfin# less example.mp4 
example.mp4: Permission denied

Looking at Synology File Station > right click on the file > properties > permissions, it shows me zero permissions:

It looks like all the files downloaded via the Download Station end up like this.

If I manually change the file like this:

Then suddenly everything works and I can play it in jellyfin:

root@jellyfin# less example.mp4 
"example.mp4" may be a binary file.  See it anyway? 

Is there any way I can fix it so that I don't have to manually mess with permissions for every single file downloaded?

It worked fine for years, I've had this NAS since 2018.


r/synology • • 9h ago

DSM How do I get SNMP v3 working?

0 Upvotes

I have an 1821+ that I am trying to get SNMP v3 working. I enabled it, I set the SNMP v3 User, the v3 auth protocol is SHA, I pasted the password in (and also tried typing it), I set the v3 privacy prototol to AES (but read that it migth need to be DES which I have tried) and pasted and or typed in the v3 private password.

When my PRTG monitor tries to connect it fails, so I don't know what I am missing.

My PRTG is monitoring other devices on the network that use SNMP v3 so its not a firewall issue on the PRTG server. I also don't block traffic inside my home lab.

I am running the latest DSM 7.4.x which I am not sure if its has anything to do with it?

Thanks,


r/synology • • 21h ago

NAS Apps Help with configuring JellyFin media server app

6 Upvotes

Discovered that DS Video is now unsupported in the latest DSM update. I installed Jellyfin, and set up my media folders, but I can’t get it to connect, and I’m not sure what I’m doing wrong, Jellyfin‘s own documentation doesn’t seem to be up-to-date (it talks about a “container” tab that doesn’t exist). Does anybody have a walk-through or other advice on configuring a Synology box to work with Jellyfin? Or do you have any other suggestions for a media server for movies? Other than Plex.


r/synology • • 1d ago

DSM SHR; query about replacing larger single disks

5 Upvotes

Hi all,

Quick question that I hope someone might be able to shine some light on as I'm reading conflicting things online.

I'm aware that with SHR, you can't reduce the number of disks in a pool (makes sense).

Currently using SHR1 and the array consists of a pool of 6TB HDDs (SSD cache in front of it yada yada, likely irrelevant to the question). If I were to add a 12TB HDD to it that I have on-hand that's had very few power-on hours, am I painting myself into a corner when the 12TB eventually fails or I want to replace it for any reason?

As I understand it, when adding a larger disk, you can't use the full capacity without using multiple of them (relative to SHR 1 and 2), which seems similar to how Unraid's parity implementation works.

If the 12TB disk fails or I want to replace it, can I just replace it with another 6TB disk? Or am I forever forced to replace it with another 12TB disk? And does using SHR2 over SHR1 change that?

Could two 3TB HDDs replace a failed 6TB disk? Not that I'm intending to go that route, but curious.

With HDD prices being what they are at present due to AI, 12TB isn't the sweet spot at present for this particular appliance, so I'm not likely to replace it with another 12TB or add any further 12TB HDDs in the immediate future as my data isn't likely to grow at that rate on this particular appliance, but just happened to have a datacenter grade one on-hand that I'd happily add if it won't cause me any issues later down the line like forcing me to replace it with yet another 12TB drive or endure being in a degraded/error state if I don't and instead replace it with a 6TB HDD.

My hope is that I may be able to switch over to SHR2 or just add another 6TB (of the 12TB capacity from the added disk) to the pool in the meantime (capacity for more snapshots could be useful). I'm fairly accustomed to having dual parity on Unraid, so would be nice to have SHR2 on DSM.

Thanks!


r/synology • • 17h ago

NAS Apps [WTB] Synology Surveillance Station Camera License (Digital Key)

1 Upvotes

Hi everyone,

Before I go ahead and buy one at full retail price, I figured I'd check here first. I'm looking to buy a valid Synology Surveillance Station device license to add another camera to my NAS setup, as I've maxed out my default free licenses.

Since it's just a license key, I'm looking for a digital transfer rather than having the physical card shipped. If anyone has a spare license they aren't using and wants to sell it, I'd be happy to buy it from you. Please let me know your price.

I can pay via PayPal. Please comment below or send me a PM.

Thanks!


r/synology • • 1d ago

NAS Apps DSM Replication Service update - security fixed

18 Upvotes

An update for Replication Service is available now:

Compatibility & Installation

  1. Replication Service 1.4.1-1407 requires DSM 7.4 and above.

Fixed Issues

  1. Fixed an issue where subsequent replication tasks might fail if an earlier replication was interrupted unexpectedly.
  2. Fixed multiple security vulnerabilities.

r/synology • • 1d ago

NAS hardware ATA Security locked Seagate IronWolf Pro 10TB from ex-Synology drive, “synology” password doesn’t unlock it, need help

Thumbnail
0 Upvotes

r/synology • • 1d ago

Routers SRM update and intermittent internet loss

0 Upvotes

I've recently updated our SRM to the newest version - SRM 1.3.2-9366 Update 3 - and have begun getting internet dropouts that were not happening before.

My current setup has a main RT6600 providing routing, with two hardwired routers (a second RT6600 and a WRX560) providing additional connectivity on subsequent floors.

Internet comes into the house via cable, and the modem is set to bridge, so all the routing happens on the Synology Router.

Aside from looking into out ISP, have any others experienced intermittent internet loss with this new update?


r/synology • • 1d ago

NAS hardware Aqara G400

0 Upvotes

When I first got this camera I was able to connect it to surveillance stations but now it refuses to authenticate. Has Aqara changed something to stop this?


r/synology • • 1d ago

Surveillance Bird nest camera

0 Upvotes

Anyone using a bird nest camera that works with surveillance station?


r/synology • • 1d ago

Solved Do i have to delete and rebuild the storage pool to get more space?

0 Upvotes

I had my DS420j configured with 2X 12TB drives and 2X 5TB drives, for a 20TB pool. I replaced the 5TB drives one by one with 10TB drives i already owned, hoping to expand the storage. Reading the instructions more carefully after the fact, it seems that as the 10TB drives are smaller than the 12TB drives, i get no extra storage at all - is this correct?

My current plan is to backup everything and delete the pool and rebuild it :(


r/synology • • 1d ago

NAS Apps Maps View for Synology Photos

5 Upvotes

Dear Synology Community,

I am a 923+ owner who likes to use the world map overview on the phone with the Synology photos app.

I missed that functionality on my browser, so I spent the last hours to Claude the following extension. I like the result and it does the job.

I don't have an developer chrome account, but let's see.

I hope the. Implementation of OSM is fine like that🙏

Check it out, get it analysed by ai if you care. Enjoy it.

https://github.com/mafi-code/maps-extension-for-synology-photos

To add this extension you need developer mode, download the code and add the unpacked extension to your chromium browser.

👋🎤


r/synology • • 1d ago

DSM DSM update - quickconnect

0 Upvotes

I got a "failed update" warning this morning on my old DS216 that was set to AUTOMATICALLY update, from DSM 7.1.1-42962 Update 9 to 7.2.1-69057 Update 13! I don't know what f**cked up in my config but I want to go on.

Now, as I apply this update, it warns me that "after this update, quickconnect will only be allowed through the relay service". Fine, but I currently only connect through quickconnect (Yes, I know, use tailscale -gee they're good at marketing ;-) and my quickconnect settings are therefore greyed out, so I cannot check whether I am already using their relay service or not.

Question: how can I check whether I am currently using the relay service, apart from the DSM GUI?


r/synology • • 1d ago

NAS hardware USB Wi-Fi

0 Upvotes

Are there any usb Wi-Fi adapters that still work with dsm7 I have a ds920+. Tia.
Ps I know Ethernet is best so spare me that lecture


r/synology • • 2d ago

DSM Synology Encrypted Folder – Password Not Accepted

6 Upvotes

Hello,

I have a problem with an encrypted shared folder on my Synology NAS.

  • NAS: RS1219+
  • DSM: 7.1.1
  • I created the encrypted folder and set the password myself.
  • The folder was working normally before an unexpected power outage.
  • After restarting the NAS, the folder became unmounted.
  • Now DSM rejects my original password with an "Invalid Key" error.
  • The .key file download was cancelled, according to Chrome download history.
  • Key Manager was not initialized.

The folder is still visible in DSM and shows its original size (about 24 GB), but I cannot access the files.

I have a backup from November 4, but I would like to recover the newer data as well.

Is there any way to recover the encryption key from the NAS or access the folder without the .key file?

Has anyone experienced a similar issue?

Thank you.


r/synology • • 2d ago

Solved I have a DS918+ and it struggles with 4K video files played in Plex. I have tried all types of direct play settings etc but no matter what it still stops and starts as it buffers. Is this a just a hardware issue with the NAS? Do I need to attach a mini PC to do the transcoding? Thanks

5 Upvotes

No matter what I do with settings or file types my DS918+ just struggles with 4k content via plex. I It has been the same over a number of DSM versions. Is there anything I can do to fix this. I have read that attaching a mini pc to the NAS to do the heaving lifting might be needed. How powerful does it need to be and how would I set it up? Will I still be able to run synology drive to back up my files?

I just want to make use of my 4k content with my 4k tv in the most cost effective way. Thanks

EDIT FURTHER UPDATE AFTER TAKING ADVICE : After having more time to follow and test the advice in the comments I have figured out the following. If I use force direct play in the settings for plex the 4k videos will play fine with no buffering on the LG TV Client however, any 4K file that uses DTS or TRUEHD as the audio codec will not have sound. After a little research this is because LG no longer support DTS or TRUEHD codecs. If I watch the files with those codecs via my PS5 or the windows plex client the audio plays fine its only via the LG plex client that the audio does not work. I will need to convert the audio to a supported codec to work with my tv.

Thank you everyone for your advice and help. I was able to get to the cause of it all and it made me realise I do not need to upgrade my NAS or attach a mini pc.


r/synology • • 2d ago

Solved USB gets random eject

0 Upvotes

DS418 Play

When I’m transferring files via my SSD connected by the USB port on either front or back I just ejects it and then will not accept it again.

I can plug it into my pc and it works no problem but not in my NAS

Has anyone dealt with this problem before?


r/synology • • 2d ago

NAS hardware Just bought a DS1825+ for my Christmas...

0 Upvotes

What gotchas and tips do I need to pay attention to when I finally get to set it up? (Wife says it has to go under the tree grrr....)

Will be mostly used for media (Plex)...but I will be running Plex from another box...


r/synology • • 2d ago

NAS hardware Home Assistant performance on Synology NAS vs 2012 Mac mini?

3 Upvotes

I asked this in r/homeassistant but didn't get any replies so I'm trying here.

I currently have HAOS running as a VM on a Synology DS1821+ with 32GB RAM. The VM is configured with 2 CPUs, 1 reserved thread and 4GB of RAM. I'm generally fine with how HA itself performs, though any graphs that show long term statistics takes a while to show up. I also have some HA addons like Matter Server, Mosquitto broker, Network UPS Tools, Z-Wave JS UI if that matters. The USB Z-Wave stick is passed through to the VM.

What I'm not sure about is how HA is affecting the rest of the NAS. The number of integrations and entities has grown considerably in the last couple of years. I just added some bluetooth proxies and I'm trying out Bermuda for room tracking.

I have a late 2012 Mac mini (i5-3210M with 2 cores, 4 threads), 16GB RAM, 500GB 2.5" SSD plus the original 500GB 2.5" HDD and I'm thinking about making it a dedicated HA system, but I don't want to switch just for it to perform worse or be more of a hassle.

Does single thread or multithread performance matter more here? The mini's CPU is 6 years older than the Synology's Ryzen V1500B (2012 vs 2018) but it'll get to use all four threads.

I'm guessing if I do switch, the SSD in the mini will make things more responsive but it only has 14% life remaining. I have a couple other Crucial SSDs with 89% and 84% remaining so I could swap one of those if it'll burn through that quickly. Does HAOS have any support for reading SMART or SSD life remaining?

I'd appreciate any thoughts on this. Has anyone else made a similar move?