r/tacticalgear • • 4h ago

Communications Opscore fast sf setup

Thumbnail
gallery
16 Upvotes

I decided on adding Bluetooth for my peltor comtac viii.

Had to get a NATO to 3.5mm adapter and a cheap Amazon Bluetooth dongle and it works!

More for educational awareness though cable management starts to become an issue.

Cables hidden in counter weights pouch in the rear of my helmet

Helmet is a opscore fast sf gen 2 3m peltor comtac viii Boom mic with y cable harness by bifrostgear NATO adapter by comgear supply


r/tacticalgear • • 10h ago

My first helmet

Thumbnail
gallery
14 Upvotes

teamwendy

princeton vizz and ssvlite


r/tacticalgear • • 9h ago

Paq4c or vital2?

Post image
9 Upvotes

r/tacticalgear • • 43m ago

Recommendations Quality level 4 plates

• Upvotes

Looking for high quality level 4 (rifle) plates, pls drop company recommendations. Thanks.


r/tacticalgear • • 1h ago

Question Recommendations for reliable, budget Level lll to level lll+ large 10 x 12 ceramic plates?

• Upvotes

I’m looking into a few options here. Budget limit is $340-$350 at the moment but preferably less. I trust surplus plates. Have a PC setup with soft armor and IFAK, just wanted to add the actual plates in order to finish the kit up. Any recommendations are appreciated, thanks!


r/tacticalgear • • 1d ago

Rhetorical Hyperbole Training on what matters! 😂

241 Upvotes

Teaching my furry battle buddies room clearing and CQB tactics!

P.S. Pretty sure my neighbors think I'm crazy!


r/tacticalgear • • 2h ago

Question Wear a ballistic helmet

0 Upvotes

I live in a farm and sometimes I have to go outside and check late night for noises and I do it with my gun, I have a silly question I have a ballistic helmet but no plate carrier, where I live is pretty calm but you never know because its still a dangerous country the question is will, you guys use the helmet? I feel very dummy using it

Update ( I don’t have NODs)


r/tacticalgear • • 7h ago

Question Blade tech valor aftermarket hood

2 Upvotes

Hello, I am currently the happy owner of a blade tech valor holster for my M&P. I am now also the happy owner of a Holosun 507 Promax.

The large hood on the valor, paired with the Promax, is ridiculously tight and it interferes with the draw as it doesn't open properly. Do any of you guys know of any possible aftermarket hoods that could be used with the holster? I'd hate to leave it hoodless and unprotected.

Thanks!


r/tacticalgear • • 1d ago

Need helping assembling a National Guard outfit for a post apocalyptic horror film.

Thumbnail
gallery
199 Upvotes

What individual pieces would I hypothetically need to complete an outfit like this? Any help would be greatly apprciated.


r/tacticalgear • • 4h ago

Question Ballistic Metal

0 Upvotes

Hello everyone,

I live in an area that will likely become a conflict zone in the near future. Im from Brazil, I know this from the news, and I need to prepare in case it actually happens.

I need to create a ballistic plate for my wife and one for myself for our protection, should the need arise. I must emphasize that I am unable to purchase such items, as acquiring them is effectively illegal in my country.

I need to find a type of metal capable of withstanding at least 5.56-caliber rounds. Do you have any suggestions?

I am already aware of the necessary measures to prevent shrapnel, but I am unsure which metal to use.

I recently saw that in Ukraine, people have been using improvised methods to construct these types of ballistic plates; however, despite my best efforts to research this, I haven't been able to determine which metal they used. Here is a link: https://www.youtube.com/watch?v=R5l5PndBDc8&t=56s


r/tacticalgear • • 5h ago

Question U329 Flat VS Rounded End Pins?

Thumbnail gallery
1 Upvotes

Hi everyone, I'm new to comms so pardon me if I'm asking ridiculous questions.

Is there a difference between flat and rounded/angled end pins? And are they interchangeable? The first 2 images are examples of "flat" and the last 2 are
"rounded".

Thanks!


r/tacticalgear • • 1d ago

Retroslop

Thumbnail
gallery
126 Upvotes

r/tacticalgear • • 6h ago

Question Plate carrier setup

0 Upvotes

How much is too much? I’ve been trying to get my carrier setup right but can’t seem to figure it out. I think maybe I’m just trying to put too much on there. What’s the general consensus on how it should be? I know it’s pretty personal but should I just stick with mags, med, and comms? I’ve been trying to also get a dump pouch, handcuffs, BRB (good dude concepts) and another admin pouch and extra TQ but can’t get it all cause I wanna have a triple and quadruple mag pouch. Is that too much? Should I leave something off? Use a belt for some? TIA for any advice.


r/tacticalgear • • 1d ago

Plate Carrier/Body Armor Matching belt

Post image
70 Upvotes

What would be a good battle belt for this


r/tacticalgear • • 7h ago

Recommendations Optics for gpr ak

1 Upvotes

recently been researching into what optic i want to run on my end all be all ak setup, its a zenitcod ak103. i have a couple contenders and just need some outside input. on paper the elcan has a lot of what i want.

-etched reticle

-close to true 1x with magnified option

-same head position swapping between magnifications

-good nuff eye relief

-durable

-this is also literally my dream optic but ive never been behind one

but there is a decent amount of tradeoffs with this like price, i don't know how much i trust the spring system to hold zero if anything pushes against the optic or gets inside the mount, along with stories of the arms mount just not working on out of spec rails (this would be mounted on either a zenitco b33 or barwarus t33)

the other contenders are a rds+ mag setup with a 4xtpro and a g33, or a ta50 acog (this would give up eye relief and my 1x as i do not want to top mount a rds on a already high acog on an ak)

just looking for some opinions and knowledge on if I'm going about this all wrong, thank you.


r/tacticalgear • • 22h ago

Gear/Equipment Reddit special?

Thumbnail
gallery
13 Upvotes

Saw this the other day. Bear creek upper on a BCM lower. Interesting choice.


r/tacticalgear • • 21h ago

Retractable key reels on a duty belt: Kevlar cord vs steel cable, what's your experience?

Post image
12 Upvotes

We sell a lot of Key-Bak retractors in Finland, mostly to people who carry keys or access cards on a duty belt all day. Kevlar cord models are most popular nowadays

The question we get most is Kevlar cord vs steel cable, so I'm curious how it works out for people here in real use.

What we've heard so far from the users:

- Kevlar cord (Super48 / Securit) seems to outlast steel in daily use. Steel cable can kink and fray at the exit point after a few years of hard pulls.

- 48" cord length is the sweet spot for door locks at shoulder height without unclipping.

- Heavy key bunches (10+ keys) need the heavy-duty versions. The light ones lose retraction quickly.

- Belt clip vs leather belt loop: the loop version doesn't pop off when you get in and out of a vehicle.

What are you running, and has anything failed on you?

Interested in cold-weather experiences too. We get -25 °C here and some reels reported to get sluggish.

Disclosure: I work for Total Shop (Finland), which sells these.


r/tacticalgear • • 1d ago

Love me some M81

Post image
252 Upvotes

r/tacticalgear • • 14h ago

Warrior Assault RPC build Recommendations

2 Upvotes

Hi! i Recently Bought a Warrior Assault RPC in multicam, ive been trying to find a good Placard or set up to be able to carry 4-5 5.56x45 Mags and some utility pouches and radio, right now im using a Ragnarok Sling with the hook system. Any good pouches, placards or even adding a double cummerbund for extended lateral space? Thanks in Advance!


r/tacticalgear • • 1d ago

Gear/Equipment Got Gucci (I will be a loot drop)

Post image
10 Upvotes

Went from a medium ACH (too small) to a Team Wendy Epic Specialist XL. Moved my PVS-14 and MH25 V2 Mini over.

This is a tight ass helmet, worth the $1364


r/tacticalgear • • 2d ago

Rate my kit

Thumbnail
gallery
509 Upvotes

Rate the kit on a scale from 1-10 and let me know what I’m missing a fixed blade is on the way


r/tacticalgear • • 1d ago

Chest rig setup, looking for feedback and suggestions.

Thumbnail
gallery
23 Upvotes

Good morning, everyone.

I was recently reassigned from my role as a rifleman to a tank commander, and starting next year, I will be operating the Leopard. Consequently, I tried adapting my chest rig to suit a vehicle commander's requirements.

I am using a full kit from WTC, including: an M2 chest rig, a 7.62 magazine pouch (until my radio pouch arrives), a medium square utility pouch, a medium vertical utility pouch, and an IFAK (which I'm not entirely sure needs to be placed there, but since it was already packed from my previous role, I included it).

Note: Depending on the activity, I also plan to use just the shoulder holster.

I would appreciate everyone's thoughts and suggestions, especially from our veteran tankers.

Thank you all very much.


r/tacticalgear • • 1d ago

Finally built the stand

Post image
83 Upvotes

Just felt like sharing and seeing how others have their gear displayed


r/tacticalgear • • 1d ago

Gentleman Black Friday is approaching…

18 Upvotes

What are we buying and how much are we telling our wives we spent. I’ll go first.

I tried buying a Springfield at cal ranch and he said come back next week and to trust him.

I’m eyeing the Kuiu binocular harness so I can have more pockets and padding then my current vortex glasspack.

And not proud of this but I will defend the decision that I’m getting a 300BLK Jakl upper unless anyone can think of an alternative.

Night operators is running a sale on very affordable thermal clip ons just in time for my dog to start a beef with a pack of coyotes.

Obviously a few ammo cans and some miscellaneous disposable shit from the local outdoor and feed shops. Maybe I bring home a live animal so my wife doesn’t even ask the price.


r/tacticalgear • • 1d ago

I had a weird/funny idea

Post image
12 Upvotes