r/turntables • • Jun 10 '21

Turntable Guides

1.2k Upvotes

What is needed in a setup: Turntable, Phono Preamp, Amp or Receiver, Speakers.

New: Turntables and Speakers

Used: In the US make a post here with your budget stating that you need just a turntable or an entire setup, and list a town or zip code, does not need to be your exact one just one next door or nearby.

Vinyl Weekly Questions Thread: Ask for recommendations for a new or used turntable and or setups at the r/vinly Weekly Questions Thread top sticky post.

Audiophile mid to high end turntables and components: For turntables and audio components starting around $300+ ask r/StereoAdvice or r/audiophile Shopping, Setup, and Technical Help Desk Thread.

Budget audiophile speakers and amplification: Ask r/BudgetAudiophile after reading PSA: Best practices when asking for advice.

Audio Guides: Plus Speaker Wire, Accessories and Vinyl Care

More Guides:

Records and Turntables

The Vinyl Guide

Beginnners Guide

PSA - The cheap record player mechanism to avoid

Turntables to avoid

How and why to align a cartridge

Cartridge ID Guide

Audiophile, Turntables, and Vinyl


r/turntables • • 4h ago

Photo Space Rock on the New 1500CS

Post image
48 Upvotes

Got an SL-1500CS for my 40th birthday. Christening it with Muse's "The Wow! Signal" felt fitting today. The Technics is an obvious upgrade to the Drop+Audio Technica Carbon VTA that served as my prior turntable, but I'm running this in an entirely different setup than that table (which runs a VM95ML). I'm going to swap carts around in the next month or so, but figured I'd at least sample the 2M Red first.


r/turntables • • 3h ago

Technics SL1600MK2 Custom Paint Job

Thumbnail
gallery
14 Upvotes

Recently restored a trashed SL1600MK2, only thing left is a new dust cover and fixing this chassis corrosion.

I have the experience and supplies to strip and correct the corrosion but while I’m in there I’ll have the ability to also put a custom color/finish on the chassis.

My system consists of a Kenwood Model Eleven and two JBL Lancer 44s, so I’m going for 70s accurate. Obviously the silver stock finish looks great with the model Eleven, but also I’m drawn to having a very custom, 1 of 1, turntable.

Has anyone seen this done well?

Any recommendations or advice?

Tagged a couple of AI generated versions of what I had in mind for the colorway as well as my current system.

Cheers!


r/turntables • • 10h ago

Tinder Date Abruptly Ends After Woman Spots Crosley Turntable in Man’s Apartment

Post image
52 Upvotes

r/turntables • • 24m ago

Photo Turntable over Denon - Update!

Thumbnail
gallery
• Upvotes

Hello, everyone. It took a while ( after finding for free 2 shelves that did not work ), but i went all in and decided to do- over of that corner.

I got a peoper shelf and some chinky screws and a nice lamp. Its all instaled and working and it looks good and matches the book shelves above.

Thanks for the recomendations on my last post!


r/turntables • • 43m ago

Question What turntable should I pursue buying?

• Upvotes

Hello everyone,

I'm looking into buying a turntable as a gift for someone.

I am looking into either a Fluance (dont know which specific one) or an AT-LP120X.

I've also heard about a U-turn, I've also heard of Technics. I would like to hear everyones opinions on them.

This is going to be a huge upgrade for them as they have some Victrola 8 in 1.


r/turntables • • 3h ago

ARTT: an open, versioned reference for all AR turntables. Looking for eyes and contributions

2 Upvotes

Hi all,

The knowledge on AR turntables is excellent, but it is scattered across decades of threads. Photo links die, hosting sites close, posts get locked or deleted, and the key detail is often behind a dead link. Every rebuild starts with the same treasure hunt.

I started a central repository to fix that:

https://github.com/ohenley/artt

What it is: a free, non-commercial reference for every AR turntable model. Specs, service procedures, parts, mods, organized per model. Think of it as a dedicated encyclopedia for these tables.

How I work: from original material only. That means AR documents and manuals, the original websites and write-ups where the mods and rebuilds were first published, and my own measurements. I archive the source in the repository itself, with credit, so it cannot disappear. Then I write it up in a clear, direct form.

Where it stands: I own an XA, an XB and a 77XB, so those are the ones I can open, inspect and measure myself today. For every other model (The AR Turntable, sold as The Legend in the UK and Europe, the ES-1, the ETL-1, the EB-101 and any variant I missed), I need owners. If you have one on your bench, your photos, measurements and corrections are what will fill those sections.

Why a git repository: git is the tool software teams use to track every change to a project. Every edit is recorded with who made it, when, and why. Nothing is ever lost, any mistake can be rolled back, and anyone can keep a full copy. It can grow without limit and it does not rot.

How to contribute:

- No GitHub account: reply here with corrections, scans or measurements and I will add them with credit.

- With a GitHub account: open the page, click the pencil icon, make your change and submit. That creates a "pull request", a proposed change that I review and merge.

- If you know git: fork it and send pull requests as usual.

I curate everything, because the goal is one coherent, verified reference and not another pile of posts. Claims need a source or a measurement.

One more request: point me to the gold mines. If you know a great rebuild, clean-up or mod tutorial with photos, on an old personal web page, a blog or a long thread, post the link. Many of these sites are one unpaid hosting bill away from disappearing. I want to archive them, with full credit to the author, before they are gone. Authors: if this is your page, tell me if I may mirror it.

Also useful right now: original AR documents, dimensions, part numbers, date codes, and corrections to anything you see that is wrong.

Thanks,

Olivier


r/turntables • • 1d ago

Photo Been collecting about a year and half - here’s my setup!

Post image
96 Upvotes

Speakers are over either side of my desk so I can blast 80s rock into my face while I play WoW 🫡


r/turntables • • 49m ago

Lost in search for a proper/fitting turntable.

• Upvotes

Hi all,

I can't say I'm new in respect to turntables; I'm 55 and had them since I was about 10. As a big Elvis fan, I had lots of records and listened all the time. That was the only option back in the day; records :)
Now, I want to pick it up again, still have all my records and I had bough a cheap Sony in 1999 but bever got to use it properly.

Recently I bought a Denon AVR-X2800 and Wharfedale Diamonds 12.4 standing speakers.
Connected the Sony; sounded awfull!

So now I'm looking for a proper fit and read a LOT.
The thing is: just spend a lot of money (due to sicknesses) and now- or in the recent future- is not the time to spend a lot of money.

I have read/came to understand: older records: wise to get an 'elliptical needle'.
Connect it to the phono input on the Denon and let him do the amplifying work.

Since the budget is somewhere around 250 euro's......I was thinking second hand like a Technics SL-Q210? Or new a AT LP120X?

I do want a better sound than from the Sony because if it's going to be like that, I already know it's only going to collect dust and that would be a shame.

The looks don't really matter to me; it should fit the quality of the rest of the system and the Sony just doesn't.
But the more I read, the more I question, the more I doubt......I can't seem to get out of it.

Please help me out a bit?
Any help is much appreciated.

Edit; the reason I was (mostly) looking for those TT's, is that -as far as I read- those are upgradable and I can get another needle (the elliptical) and such.


r/turntables • • 1h ago

Question Need help on vinyl setup!

• Upvotes

Hey fellows, just got into the vinyl world recently, and wanted to have a vinyl set up for my living room.
Since it’s Black Friday, I’m considering a set up under $600CAD. Could you guys help me out ?

For the speaker, i personally don’t like an overpowering bass, i like listening to jazz or orchestra music. Or some female vocals. If sound quality doesn’t differ that much, I prefer a more compact one.

For the turntable, i don’t mind manual/ fully auto, i heard direct drive is better, i will only buy this one turntable for next 3-5 years. Bluetooth is not necessary.

Here are some options:
1. Audio Technica LP120xUSB $430
Edifier m60 speaker $150

  1. Audio technica LP70x $270
    Edifier R1280T $150

Any other recommendations are appreciated, thanks fellows !!


r/turntables • • 6h ago

Technics SL-1500C Dust Cover & Fittings

Post image
2 Upvotes

Hi there, hoping this community can help me out:

I purchased a Technics SL-1500C some time ago and I think I have either lost some parts or some parts simply did not come with it. Specifically the Dustcover and how it attaches.

I purchased then part RYQ1617-K / TTD0015 TTD0015 (RYQ1617-K) which is the “Dust Cover Hinge set” hoping this would allow me to attach, but it seems what I got are the hinges that attach to the record player itself rather than the fitting I need on the lid.

I need to know either how to attach the Dust cover now, or what I need to be able to attach it as it does not look like it will attach.

I provide pictures as follows:

01 Dust Cover connection section 01: Dust Cover as-is with rubber protection over the connectors

01 Dust Cover connection section 02: Duct Cover as-is with the rubber protection removed

02 Hinge attached at back of Record Player: How the currently attached hinge looks, so the Dust Cover somehow needs to fit into this

02 Hinge attached at back of Record Player-Top View: Top View of same

03 Purcahsed Part RYQ1617-K  TTD0015 and 04 Purchased Part RYQ1617-K TTD0015: The part I purchased but looks like it’s just the same hinges as already on the bac of the player.


r/turntables • • 3h ago

Turntable Amp very quiet

1 Upvotes

Hello everyone,

I bought an LP60xUSB turntable a couple of months ago, along with a used Cambridge A1 Mk3 Special Edition amp (I'm using a pair of old good-quality Sony passive speakers) - everything played together perfectly when I was at home, but I moved to University and during the move the stylus got bent, and I only managed to replace it today.

Since I've moved I've had to turn up the amplifier to the highest volume to get any good volume out of it, and I'm getting less bass compared to the treble, whereas when I first got the amp I only had to set it to a "10 o'clock" position and everything worked fine. I'm incredibly new to this stuff and I've not had a go with amplifiers before, so I'm really not sure what's wrong with it. Could something have dislodged on the move as well, and is there a fix I might be able to do myself? Or is it a bit of a lost cause haha

Thank you :)


r/turntables • • 18h ago

Photo Christmas Combo

Post image
15 Upvotes

Wild Ones 45 “Heatwave” on a Pro-ject debut carbon with clamp, acrylic platter and aluminum sub-platter.


r/turntables • • 13h ago

Help Skating Issue: Needle damaged?

Thumbnail
gallery
5 Upvotes

Hey All - am new to the turntable game so apologies for any ignorance!

I have an Angels Horn turntable (https://a.co/d/0aKA0JmB) from Amazon and it was playing normally since I bought it. I slightly dropped the tone arm (I know…) and am now having a skating issue.

I recalibrated the counterweight of the tone arm as I did when setting it up and that doesn’t seem to have fixed it. I don’t believe my turntable has an anti skate mechanism. Could the needle be damaged? Not sure what it should look like (pictures attached)

Thanks in advance!


r/turntables • • 1d ago

Question Not sure how to determine my phono upgrade path.

Post image
20 Upvotes

I recently purchased a Fluance rt87 and I absolutely adore it. It’s my first step back into Vinyl after several decades. I am running it off of my Rotel A12 MKII integrated amp. It sounds spectacular, and the built in phono preamp is supposed to be pretty good for a built in unit. All that said, I can’t help but wonder what I’m leaving on the table?
My turntable has the AT-VM95ML cart, and I’m running it into my Rotel amp. From there I am feeding Elac Debut Reference DBR62 bookshelf speakers on weighted monolith stands.
Would a Phono stage that allows me to closer dial in settings such as the Schiit Mani 3 be beneficial or would I need to spend more like a Skoll?
Thanks in advance!

EDIT: I should add my budget is under $500, ideally. I prefer to buy once and cry once. I keep coming back to the Mani 3 as far as bang for the buck. I'd like to keep my upgrade path open without doubling back to another phono stage.

EDIT 2: I forgot to mention I'm also running an 8" powered Subwoofer


r/turntables • • 12h ago

Question Are these good? Need some help.

Thumbnail
gallery
2 Upvotes

Hey everyone are these good selves for my vinyl dryer pretty cheep for me I heard about Hudson hifi being bad and don’t know about spin chemistry it’s an Australian shop

What do you think?


r/turntables • • 1d ago

Audio Technica LP5x Cartridge Upgrade

Thumbnail
gallery
45 Upvotes

Hey, been using the LP5x with the base cartridge and the sound was OK. Just upgraded to the AT-VMN745xML and oh boy... It's like changing from night and day, the sound was way more clear! I have some LPs that has the usual pops/cracks, and can you believe this cartridge reduce those sounds? Insane! Not cheap but worth it.


r/turntables • • 21h ago

Amazon UK has Technics SL-40CE deeply discounted right now

Thumbnail amazon.co.uk
9 Upvotes

r/turntables • • 15h ago

best budget cartridge upgrade atLP120

3 Upvotes

whats the best upgrades for this turntable in general, but just like one step up , nothing too pricey, gift idea etc


r/turntables • • 1d ago

That voice. That solo. Played on a Beogram 8500.

14 Upvotes

Judas Priest - Beyond the Realms of Death from Stained Class (1978). Playing on the Beogram 8500 with the SoundSmith SMMC1.

I switched things around a little bit from the original B&O setup. The system playing this music is:
Beogram 8500 with Soundsmith SMMC1 -> Pro-Ject TubeBox DS3B -> Beosound Moment (line in) -> Beolab 11 -> Beolab 4000

The DS3B has been currently configured to 150pF loading capacitance and 45dB gain. Loading resistance is of course the standard 47k Ohms.

Some songs never get old, this is one of them!


r/turntables • • 11h ago

Suggestions ATLP70 vs Sony PSLX3BT

1 Upvotes

Trying to think of a Xmas gift for my boyfriend. Both around the same price point but it’s because the Sony I found is heavily discounted. He’s kinda particular about things like this- he’ll think it over and put it off forever if he gets it but will probably love whatever I get him. I’m a student so I’m on a bit of a tighter budget, but I still don’t want to give him bs lol. What are your thoughts on these turntables? Any other recommendations?


r/turntables • • 1d ago

Score of the year!!

Post image
230 Upvotes

Rega Planar 3 Turntable
x2 Ortofon 2M Black Cartridges (one is an MR)

SCORED for $200 total on fb marketplace

Purchased from a very nice older couple a little over an hour away from me who are the original owners since 2017 and are only getting rid of it because they got a brand new one (same model)

Just has broken dust cover hinges but otherwise in great shape

Will upgrade my U-Turn Orbit + AT-VM95ML (but I might put that cart on my vintage pioneer table)

Happy hunting!!


r/turntables • • 16h ago

Cartridge/Stylus setup help

2 Upvotes

So I took the plunge and got a used TT (Denon DP-51F) and it's now being shipped. The cartridge has been removed for shipping, so I'm going to have to reinstall and I guess align everything? I've never done this and could use some guidance regarding tools I need, or am I better off taking it to a shop to do it for me? I'm pretty confident in my DIY skills and enjoy picking up new skills, but understand some things are best left to the pros.

Any advice, ideas, or suggestions more than welcome. I'm in the USA if that matters.

This forum has been super helpful, thanks in advance!


r/turntables • • 1d ago

Inherited my closest mate and also my only awesome uncles turntable

Thumbnail
gallery
49 Upvotes

My uncle passed away recently and I wasn’t thinking of taking his record player as I already had my own and I took it on a whim as I love the history. What I’ve googled lots say it’s very good. It’s so heavy lol. I haven’t seen the tonearm before with the string thing either.


r/turntables • • 16h ago

Question Complete newbie, would like some opinions and feedback.

2 Upvotes

I recently purchased the Victrola wave. Along with the pair of tempo speakers. Does anyone have this set up and if so would you be will to provide me with some recommendations for nice stands, preferably walnut color that vibe with a MCM decor. Or guide me to where I can find something of that style? I am so new to this but it was a holiday present to myself and I want to take good care of it. For anyone wanting to know more details it was the third man records design. I’ll be happy to put up photos once it’s ready. Thank you. This is my first post and I’m really excited to share my journey with you all. ❤️