r/ATV • • Jul 28 '25

PSA Belts and the types of wear

Post image
21 Upvotes

r/ATV • • 1h ago

Help Help Locating Polaris Side Panel

Thumbnail
gallery
1 Upvotes

Hi All - I made an absolutely stupid mistake leaving a body panel unsecured while trailering my 2001 Polaris Magnum 500 the other day, and understandably, it flew off somewhere along the drive.

I’ve driven the same 30 mile loop several times, and I’ve had to accept that I’m not going to find it.

I’m trying to track down a replacement online, but I’ve only been able to find one single sold eBay listing for it. From what I can gather, the part number is 2632101-317.

I know this is a helpful and well connected group of folks, so I was just wondering if anybody would have any leads on tracking one down, or any other information that may be helpful. I’m currently trying to find “for parts” listings, but as expected, even the very few I’m finding aren’t the right color.

Thank you all very much in advance - I’ve learned a ton from this sub since getting my ATV a couple of months ago!


r/ATV • • 19h ago

Help Atv for 'hard' off-road and hunting

Thumbnail
gallery
22 Upvotes

I had a deer hunt this weekend, and my current quad did not fair well and I think I'm gonna replace it. Full story.

I have a 94 sportsman 400 ol 2stroke chain drive 4x4, bike is in good shape and runs great really no complaints til this weekend. I had a hunt in southern az, we get to the are via a jeep trail thats rated a level 7. I've been up this trail several times. Took my rhino 700 up it, with some drama but no issues. Been up on the dirt bike, cake. So I figured ole smoky would have no issues, much drama, much issues. Rolled it twice, once was 100% me and the 2nd one no one quite knew what happened. I could get the quad up the trail, but hanging off to one side on one leg, getting off the quad and walking it up a couple obstacles. The main issue was I believe the solid rear axle not letting it flex and it would just be a 3wheeler a lot, and at times without warning if the ass slid.

So I think I wanna replace the bike. I like my Polaris' and Yamaha's. So I think my list is the og sportsman 500ho or the 700. Newer 570/500/600 and possibly a 2up, the longer wheelbase is appealing. Yamaha grizzly 700/660 or Kodiak 700 maybe 450.

I don't need speed all the speed, the 400 I have now is 38hp I believe and that's been pretty adequate overall, engine braking would be preferable power steering is not a necessity but a bonus.

Thoughts? Comments concerns? Thoughts on how bad of a rider I am? Whatcha got reddit.

Can-am need not apply


r/ATV • • 17h ago

Help Honda ATV ignition problems

2 Upvotes

I have a Honda 2002 350 Electronic Shift ATV. In the USA it would be a Rancher.

I had a problem it wouldn't run. I found the carb needle valve stuck with a teal gum varnish likely from ethanol. I took the carb to be cleaned / Rebuild at the dealer.

I then ran it for a few days and found the same problem. I found something stuck in the carb and cleaned it my self and decided to ultrasonic clean everything. I also took the fuel tank off and cleaned that. I found some debris, and I found the in tank filter was rotten. I cleaned the tank right out and vacuumed it etc... it was spotless with a scope. I changed the fuel line as well.

Somewhere above in one of my attempts I drove it a mile and it started to act weird like no fuel or just cut out like i shut the key off. After the fuel lines, I ran the quad for about an hour no problem. I then hauled it back to my farm and it would not start the next day.

I tried and I tried. I used a small starter fluid and nothing. I had fuel. Something I forgot to mention above is I had some intake back fire pops... and this time I had another but the loudest exhaust back fire.

At TDC I have 0.008" clearance I know its supposed to 0.006 valves move like they should.

Cold hand cranking I have 95.5lbs compression vs the 97.

Carb is clean.

Fuel flows

There is spark on the plug

oil is clean

Battery is 13.2v

I am lost, my service manual is 120 miles away and my patience with Google, ChatGPT and CoPilot has disappeared. Short of taking to a shop, does any one have any ideas that this randomness happens. I can't make it run.


r/ATV • • 18h ago

Help What is smoking under the gas tank?

2 Upvotes

2001 polaris sportsman 500 HO

Got this quad from my dad and it hadn't run in 2 years. I replaced the stator and it fired right up. Now there's white, thick(ish) smoke billowing up from above the front of the engine, just below the gas tank. I've crawled all around and under this quad and can't get a good look at where it's coming from. Only happens while running and stops the second I shut it off. It drifts slowly instead of shooting out like exhaust, and it doesn't look like it's coming from the exhaust pipe. It might smell a little sweet, but my sniffer isn't the best at that. The carb is exposed right now and I haven't tuned the idle screw or choke cable yet. Could this be coolant steam, or something else? No drippage or wetness along the coolant lines. Definitely not electrical. Any ideas on where to look first?


r/ATV • • 1d ago

Help Ideas

Post image
13 Upvotes

I’m not sure what I want to do to my outlander 850 it’s all stock


r/ATV • • 20h ago

Help Powermax bear claw 600 1000km on it bad brearing?

1 Upvotes

I've driven it and revved it in neutral, and I can hear a really loud metal-on-metal noise. The belt also makes a weird sound when I let off the throttle. I noticed the secondary clutch sounds off—should I replace the bearings


r/ATV • • 1d ago

Help Shifter cable

2 Upvotes

I bought this rzr 900s used and it would shift into all gears. It was rough would take me using both my hands to pull it out of park my wife couldn’t even attempt it. I adjusted the cable it’s still super hard to shift and now won’t go into high. Ive spend days trying to get it right and it’s not still hard as no other to get out of park and I can’t get it to go into high anymore. Any ideas on what I can do to get it right


r/ATV • • 21h ago

Photos Thoughts?

Thumbnail
gallery
1 Upvotes

Was looking at getting something for my 6 year old son, he is a big kid so he might last 1 year on a 50, if that long. I was looking at an Outlaw 70 or 110, I figured this may be a better entry way to that from his modified batter raptor. I have a 3 year old to pass this down to after as well.

Dont know much about these, any info or opinions on them and what theyre worth?

Im in South Western CT for reference


r/ATV • • 1d ago

Help Ground Anchors

Post image
7 Upvotes

Does anyone have a particular style or brand of ground anchor they recommend?

It’s for a can-am traxter which is often used in boggy soft ground. It’s not often we get stuck, but it’d be nice to be able to self recover easily.


r/ATV • • 1d ago

Help Need help front sprocket

Thumbnail
gallery
1 Upvotes

Cant find a sprocket that fits. Make and modell atv dont help, i bougth a used axsel so it is not original. Dont know what make it came from, but old sprocket is to big on the spline. Sprocket looks like the scrambler picture.


r/ATV • • 2d ago

Photos 2026 Can Am Outlander 700XT.

Post image
11 Upvotes

Just picked up a new 2026 Can Am outlander 700XT. One thing that I noticed after I got it home of course is this "gap". I was looking online at some others out there and seems that they might have the same problem. Are others seeing this and has BRP fixed it for anyone? I know....I know. Im being picky right now but it is new and want it to be good for at least some time.


r/ATV • • 2d ago

Help Does non ethanol fuel require stabilizer?

6 Upvotes

Once hunting season ends my quad will be in storage until May. I was planning on using non ethanol fuel if I can find it. If so does non ethanol fuel benefit by pouring in Stabil or should I be fine leaving it as is? I have a 2026 Honda Rubicon.


r/ATV • • 1d ago

Help Need help. 1986 honda trx200sx pull start engine

1 Upvotes

So ive recently come across a compression issue. Before you ask. Yes I adjusted the valves perfectly. I also inspected the rocker arms, valves, cam chain. Engine isnt built with a decompression cable. Only has a hand lever. Held it, recoil spun fine. Pushed up and it clicked down fine after pulling. Without spark plug in it also spun fine. Everything in. I pull the rope. Locks up before tdc. Insanely hard to pull but not impossible. Adjust again and 10 more checks of everything and easy pull. Too easy. Would turn over with just a slow pull, starts a few times but dies out. Then suddenly locks up again. Adjust again less compression but still a bit hard to pull. Now hearing a spin and a hiss of air when pulling and no turning over. Checked the recoil, paws, springs. All clean. All work fine off the engine. I am genuinely lost. After 2 weeks ive lost hope. I feel like ive checked everything. Maybe theres something i missed. Any advice would help. Thank you in advance.


r/ATV • • 2d ago

Help How bad is this

Post image
3 Upvotes

r/ATV • • 2d ago

Help ATV dies after an hour or so

3 Upvotes

2003 Bombardier Traxter Max 500 will run great and whip around for an hour or two then our of nowhere bog down and die. After a while of running when I give it gas it dies, after a few minutes it'll restart and then bog down again after that. I've been battling this for a week and its driving me insane. Sometimes after it dies I can restart with the choke, then when I release the choke it immediately dies. Sometimes it wont restart at all.

It has okay compression before and right after it dies (like 90 which seems lowish but never changes)

It has good fuel delivery and spark before and right after it dies.

Its got a new battery, fresh fuel, and new spark plugs. The air filter is clean too and none of the vacuum lines seem to be clogged.

Any advice would be awesome, I'm going crazy. It runs so great when it is running.


r/ATV • • 2d ago

Help Used ATV for a 4' 3" grand kid

2 Upvotes

Hi, I'd like to get a used ATV for a my grandson to ride around on. I have 5 acres, so it's not like we are going to go on long rides or anything. Right now I have a Honda Rancher 350 that I ride and a 1998 Kawasaki Bayou 220 that his older brother uses. Would something like a 2002 mz90 be too small? I'm open to other ideas. Typically I'll find something on Facebook Marketplace for about $1000 and fix it up.


r/ATV • • 2d ago

Photos Suboptimal

Post image
4 Upvotes

97 kawasaki bayou 300


r/ATV • • 2d ago

Help 2006 Polaris Hawkeye 300

1 Upvotes

I need a CDI for my 2006 Polaris Hawkeye 300. Since this has been discontinued by Polaris for that particular year (I have tried an Amazon knock off and no, it doesn’t work-no spark), should I just take the ATV to the dump. Is there any other options for getting it to run again?


r/ATV • • 2d ago

Help My first quad lmk if it’s bad or not

Post image
31 Upvotes

It’s a Arctic cat 2007 - 2009 idk let me know if I can do anything to it


r/ATV • • 2d ago

Help Is Kymco 400 a solid atv?

0 Upvotes

r/ATV • • 2d ago

Help YFZ450R 09 - ECU Flash

1 Upvotes

Anyone have the stock ecu bin file for the 09~13 YFZ450?

Im doing some research to read/flash tune mine. Im not interested in the vortex if anyone asks. I already created a flasher program for my other dirt bike using reverse engineering. Im looking to do the same thing to my atv. But i need the stock file to RE it.


r/ATV • • 2d ago

Help Hellllllllpppppp

3 Upvotes

Hey everyone, I bought a used 2013 Kawasaki Brute Force 650 and it was having troubles starting and staying running. I decided to clean the carb without really knowing what I was doing. I also replaced and oiled the filter, changed out the spark plugs and did an oil change.

I simply sprayed out the carb, and did not remove any needles/floats, ect. I did remove the vacuum slides. After reassembling I knew right away that touching the carb was a bad idea. It was a shit show. Popping and backfiring, not running, ect. I found and fixed two problems (cracked boot and a vacuum slide with no vacuum. Doing the finger check I was getting the normal vacuum sound and it was even on both slides, so I'm fairly confident they are gtg.

I also had massive deflection in my belt, so I swapped it out with an OEM one, so I'm gtg there.

Now, I am capped out at 70km/h when I was getting 100km/h with light and intermittent popping at idle (I'm guessing that I just need to play around with the choke screw).

The new spark plug is showing rich, but not oily/gasy so I believe it to be firing. I have not checked the other side yet.

The engine sounds normal and I am not getting sputtering or bogging down when I rev, but I am going through gas at a much higher rate. I checked the carb overflow drain tubes and nothing is coming out.

I checked all the vacuum hoses and none are kinked or disconnected.

Is it possible that an over oiled airfilter could cause this? I feel like I followed the directions, but I read that what one dude does is sandwiches between paper towel and stands on it. I definitely didn't do it to this excess.

I understand that going for a rip with a less oiled air filter will answer the question above, but it's late and I can't sleep because of this, lol.

Just seems like every issue online has bogging or sputtering involved, but I simply can't go faster.

Due to my inexperience, I may unknowingly leave out a critical detail, so please ask.

I made sure the belt switch was fully seated to the rear (on position) and I have no belt lights. I dont suspect this to be a partial limp issue.

My next step is watching it burn as I have spent so much time chasing ghosts. So, like the title says heeeellllpppp, lol.

Thanks all!


r/ATV • • 2d ago

Help Can am 2026 xt 700 vs 2020 xtp 850

1 Upvotes

Hello, first post here... I’m shopping for an ATV to plow my driveway, ride with my little ones, and do some occasional work (hauling wood). I live in Québec, Canada, so lots of snow and cold starts.

At first I had my eyes on a 2020 Outlander MAX XT-P 850 (one owner, ~2200 km), but then I found a 2026 MAX XT 700 (former rental, ~2,000 km). Both come with a plow and they’re about the same price.

From what i know, better suspension and bigger engine on the 850, the platform and engine has been there for a while, the 700 redesign chassis, single cylinder engine, easier to maintain and run cooler. The non-removable passenger seat is a bit of a turn-off for me too.

Anyway, I’ve been going back and forth for weeks and still can’t make up my mind... For plowing and easy rides with the kids, which one would you buy? I’d especially like to hear from anyone who’s owned either one and used it through a few cold winters.

Thanks for the input, and sorry for my English (French speaker here)!