I have a Honda 2002 350 Electronic Shift ATV. In the USA it would be a Rancher.
I had a problem it wouldn't run. I found the carb needle valve stuck with a teal gum varnish likely from ethanol. I took the carb to be cleaned / Rebuild at the dealer.
I then ran it for a few days and found the same problem. I found something stuck in the carb and cleaned it my self and decided to ultrasonic clean everything. I also took the fuel tank off and cleaned that. I found some debris, and I found the in tank filter was rotten. I cleaned the tank right out and vacuumed it etc... it was spotless with a scope. I changed the fuel line as well.
Somewhere above in one of my attempts I drove it a mile and it started to act weird like no fuel or just cut out like i shut the key off. After the fuel lines, I ran the quad for about an hour no problem. I then hauled it back to my farm and it would not start the next day.
I tried and I tried. I used a small starter fluid and nothing. I had fuel. Something I forgot to mention above is I had some intake back fire pops... and this time I had another but the loudest exhaust back fire.
At TDC I have 0.008" clearance I know its supposed to 0.006 valves move like they should.
Cold hand cranking I have 95.5lbs compression vs the 97.
Carb is clean.
Fuel flows
There is spark on the plug
oil is clean
Battery is 13.2v
I am lost, my service manual is 120 miles away and my patience with Google, ChatGPT and CoPilot has disappeared. Short of taking to a shop, does any one have any ideas that this randomness happens. I can't make it run.