r/AskElectronics • • 4h ago

Does orientation matter in this smd 4-pin tactile switch?

Post image
22 Upvotes

This switch popped off my keypad when I was changing the battery and decided to brush some dust off the pcb.

I was just going to solder it back on but wanted to check if these switches have an orientation. I mean if I put it in rotated 180 deg of original is it going to matter?


r/AskElectronics • • 6h ago

What is this resistor?

Post image
20 Upvotes

Does anyone know the rating of this resistor?

I've plugged the bands into different calculators and gotten different results.

My best guess is (Red, Black, Silver, Gold) => 0.2 ohm 5%

Im guessing it's prob a 5W because it's beefy.

Measures roughly 14.5mm in length.

I'm measuring 2.7k across it while it's in circuit so if it really is 0.2 ohm, I'm assuming it's blown.

Any help would be appreciated, also are there different color codings for different resistors with the same number of bands or am I just dumb?


r/AskElectronics • • 3h ago

First time trying to build a class AB amp, is this decent? Looking for advice.

Post image
7 Upvotes

Don't mind the diode models


r/AskElectronics • • 13h ago

why use transformers for coupling in Radios instead of capacitors?

20 Upvotes

im in the process of building/experimenting with building a Tube radio. but in almost all radio schematics i can find (both tube based and transistorized) they couple amplification stages with a transformer that resonantes at the IF frequency. but why don't they use an LC tank circuit and then couple the output through a capacitor like i've shown in the image. what are the benefits of using a transformer?


r/AskElectronics • • 10h ago

Blown ATX PSU Root Cause and Repair

Thumbnail
gallery
10 Upvotes

Hello! I've recently started reviving/restoring an old workstation. It has a 250 W "Mitac" ATX power supply, and since everything looked to be in really good condition, I just plugged said power supply into the mains (kind of stupid in hindsight) and hoped for the best, fully expecting the thing to go bang. And it did!

Now, I know my way around PC hardware but am pretty much a novice when it comes to actual EE and PSUs. I've recapped a thing once or twice and can solder alright, but that's about it, so I wanted to ask the experts in this sub: a) what may have caused the failure and b) whether this seems like something I could attempt to repair (keeping all the dangers of working on PSUs in mind), especially because these particular supplies are getting harder to find. I will never leave this thing plugged in and unattended either way.

I've waited a good while for the caps to discharge and took some photos of the damage (without touching anything, of course). At first glance, it seems like a resistor next to a capacitor blew (although I haven't measured it yet) and left a soot mark on said cap (see pics 1 and 2).

The corner of the PCB is also obviously damaged and has broken out of a retaining bracket in the case, although there don't appear to be any traces there. I also don't know whether this happened due to the bang or was already like this from the get-go (e.g. happened in shipping).

The entire PCB appears to have shifted upward, and there is a burn mark on the heatsink and inside the top of the case, so perhaps the heatsinks are live in this PSU design? If so, it seems likely that the PCB was already offset like this when I powered it on, and that is what caused a short.

Any input is much appreciated. šŸ™‚


r/AskElectronics • • 5h ago

Do I need a new board?

Thumbnail
gallery
3 Upvotes

So I offered to take a crack at repairing a TASCAM DR 40. Initially, the only problem I noticed was there was no line out 3.5mm aux port. Therefore, I found the OEM part number, ordered it, and now I am trying to solder the board. I tried to solder it in, but I stoped when I realized I that some dumb sucker had ripped the solder pads off. My questions that: do I need to go purchase a new board or can I somehow unfuck this situation?


r/AskElectronics • • 7h ago

10p thermistor?

Thumbnail
gallery
5 Upvotes

hi, i have a vevor lathe WM210V-L that stop working, only thing i see is this 10p that is open. From what i understand is a ptc thermistor.

but searching that give several result. some say 1.5ohm, 15ohm, 120ohm, some doesn't say any ohm at all.

what would be the correct replacement?

thank you


r/AskElectronics • • 6h ago

SMD transistor identification - FN 1A marking from an Aura 150 Integrated Amplifier

Post image
3 Upvotes

The one in the middle with a red dot. It reads FN 1A, is around 3mm x 1mm. It's on a rise board in the power amp section of an Aura 150 integrated amplifier. I've been unable to find a service manual for the amp.

My DCA reads a working one as an NPN Silicon BJT, HFE 142 at IC=5.05ma. Although I did measure in circuit.

Can anyone confirm the original transistor or recommend a currently available equivalent?

Thanks!


r/AskElectronics • • 4h ago

Soldered Xbox pins badly, now won’t turn on

Post image
2 Upvotes

Hello this is an Xbox Corona I was trying to solder an S RGH glitch chip on it after putting on pico to read the NAND using these output pins. I wasn’t able to read a NAND but putting it back together, the Xbox power brick is orange and the LED indicator on button doesn’t turn white. I’m not sure how to diagnose this or if it’s just better to recycle it, does anyone have any tips on what to check/do? Thank you!


r/AskElectronics • • 7h ago

Safety considerations for LED array

3 Upvotes

I'm designing something with a ~250 ARGB LED array (WS2812 etc), essentially forming a low resolution display (I specifically want this for the aesthetic I'm going for).

It will be powered by USB C 5V which can supply 15W max. The array can of course draw >100W when set to all white at maximum brightness.

I have implemented a few safety features:

  • Limiting brightness in software - Limited to ~11W (which can still produce a fair bit of heat). Enforced at the lowest driver level to prevent coding mistakes setting a higher value. Arguably a miraculous bit flip could still topple this safety measure.
  • 3A continous (4A peak) efuse - To protect a USB C power supply which for some reason is happy to provide >15W (you never know what's out there). This serves as a backup for if the software brightness limit fails or if a short forms on the PCB.
  • Voltage supervisor IC - Software monitors it and displays warning message on display (using low brightness and single colour to keep load on power supply to a minimum). This protects the external USB C power supply if it is struggling to supply enough power.
  • Temperature sensor - Software monitors this. If temps are above a safe level, a warning message is displayed (using low brightness and single colour to stop build up of heat).

Not safety measures but for context:

  • I could rewire the voltage supervisor and temperature sensor alert (plus some logic) to a FET/relay/other switch to disconnect power to LEDs completely. But ideally I want to be able to display the error to help with diagnosis.
  • 4 layer PCB. Inner 2 layers are planes which should help disperse some heat (arguably it doesn't as there's so many LEDs.
  • Temperature sensor placed on center of PCB

What do you think of my safety measures? Is it enough? What more could/should I do?


r/AskElectronics • • 9h ago

Diff-to-Diff fixed gain Mic amplification design question

4 Upvotes
Amplification and Anti-Aliasing stages

I'm not very proficient in analog design and need help with designing Differential Microphone preamplification stage for PCM3168APAPR codec. As the whole SYS supply is USB 5V only, I need to bias OpAmps to 2v5 level, but I don't think I'm making a correct schematic. As I understand, both inv and !inv inputs of OpAmp need to be biased for non-inverting amplification stage, but if I bias both ins I'm shorting signal to both ins also, so I placed two caps [C17/C16 or C18/C19] to decouple signal from inverting input AND to decouple feedback line from bias/!inv input. I don't think this approach will work and therefore ask for help. Thank you in advance.


r/AskElectronics • • 6h ago

How is the lamp connected and how do I do the simulation?

2 Upvotes

Hi there

My teacher gave us the project of making the following ciruit:

And I am struggling making the simulation, since I am not very good at reading diagrams and there are new component we didn't see, such as the LM358, the relay, the transistor and the photoresistor. So, I would like some explanation on how everything is connected and how it works since I don“t understand how the lamp is connected to the circuit.

I was doing this simulation below and there are wires where there is no current, I guess I did bad connections. Also some components are gray in the right panel and I don“t know why. Pls help me.


r/AskElectronics • • 1d ago

Why so many resistors on this PCB?

Thumbnail
gallery
110 Upvotes

Can someone explain why this PCB has so many resistors?

We were searching for an electronics courses online and we came across this Altium article:

https://resources.altium.com/p/where-you-can-learn-pcb-design-online

After a bit of reverse search, we found probably the original source of those photos:

https://www.istockphoto.com/photo/electronics-manufacturing-gm466701080-60641742

From the looks of the blurry schematic in the background, it appears that those are connected in parallel, 10 pieces each. What's the magic behind this? High power dissipation? Wouldn't it be cheaper to just use a dedicated, high power resistor, eg. 2.2 Ohm 10-20W? Also, can someone guess what's the purpose of the whole device?


r/AskElectronics • • 17h ago

FAQ Any ideas on how to stop PWM high pitched noise?

10 Upvotes

I just bought a soldering station and it works fine but as it heats up, the heating element itself makes a VERY annoying 12khz sound. I took it apart to see what's going on and sure enough, it uses that frequency for the PWM. Do you have any ideas how to maybe smooth out this pulse wave into something reasonable? I tried connecting a capacitor in parallel with it but it just made the sound louder.


r/AskElectronics • • 1d ago

What is the difference between these electrolytic capacitors?

Post image
125 Upvotes

They are both used on the same board (90's CNC controller) and their advertised values are the same. Just a random change in supplier mid-production, or could there be a more deliberate reason?


r/AskElectronics • • 12h ago

2025 EEE Graduate Still Unemployed – Seeking Career Advice and Job Opportunities

3 Upvotes

2025 Engineering Graduate, Still Unemployed. Feeling Lost and Looking for Genuine Career Advice.

Hi everyone,

I'm a 2025 engineering graduate from Tamil Nadu (EEE).

Honestly, I'm going through a difficult phase in my career. I graduated with the hope of getting a decent job, becoming financially independent and supporting my family. But things haven't gone as planned.

I've been searching for jobs for several months, applying through different job portals, attending interviews and reaching out to people for referrals. Unfortunately, I haven't received any positive results so far.

I completed Java Full Stack training after graduation, but I still lack the confidence and practical experience required to crack technical interviews.

Since my degree is in EEE, I've also been exploring opportunities in core engineering, electronics, embedded systems, hardware, semiconductor and related industries.

At this point, I'm honestly open to different career opportunities, including IT, core engineering, manufacturing, technical support, operations, graduate trainee positions and other entry-level roles where an engineering graduate can start.

My biggest challenge is that I need to start earning as soon as possible. My financial situation doesn't allow me to spend a lot of money on expensive courses or unpaid internships.

Sometimes I feel like I'm falling behind everyone else. Watching others move forward while I'm still struggling to get my first opportunity has been mentally exhausting.

I'm confused about which direction to take:

- Should I continue improving my Java and IT skills?

- Should I focus on core engineering opportunities?

- Should I explore other industries where freshers can get started?

- How do I identify genuine entry-level opportunities instead of wasting time applying everywhere?

I'd genuinely appreciate advice from people who have been through similar situations, working professionals, recruiters or anyone who can share their experience.

If you were a 2025 engineering graduate in my position, what would you do differently?

I'm not expecting an easy shortcut or sympathy. I just need some practical guidance, honest advice and hopefully a direction to move forward.

If you know of any genuine fresher opportunities or companies currently hiring engineering graduates, that would also mean a lot.

Thank you for taking the time to read this.


r/AskElectronics • • 18h ago

Why is the output of my OpAmp near zero instead of my input with gain? (With schematic)

Thumbnail
gallery
6 Upvotes

I am using the lm358 OpAmp to amplify a signal from a variable power supply.

I am attempting to amplify an input of 5v with a gain factor of (1 + R2/R1) = 2 since both resistors are 1 kOhm. My desired result is seen on image 4.

The multimeter measures very close to zero (0.05v)

Connections:
Pin 1 (V_out): positive probe on multimeter (Measured as 0.04v)
Pin 3 (IN+): 5v from variable power supply (Measured as 5v)
Pin 4 (GND): both grounds of variable power supply and negative probe on multimeter (Measured as 0v)
Pin 8 (VCC): 15v from variable power supply (Measured as 15v)


r/AskElectronics • • 9h ago

7805 gets hot when connected to 9v and servomotor sg90

0 Upvotes

Chatgpt suggested to put 5 volt regulated supply to servo so i purcahsed 7805 that is alsp suggested by it and put it between 9v and servo and then when i start it gets hot control signal was from esp32 for some time it moves then stopped and now servo only operates at 3.3v from esp not vin means 5v what could be problem? I was making experiment of automatic gate open and close with sensor and servo so chat gpt tell to first test servo with motor so i have done it? Can anyone explain what to consider when putting regulation and all?


r/AskElectronics • • 10h ago

Can I replace BTA41 BSE Triac used in on-demand water heater with BTA41-600B?

1 Upvotes

My Steibel-Eltron Tempra 24 B water heater is having issues, tripping the thermal cutoff on one heating core when the water is off. The unit has 2 cores, each with 3 heating elements. When the water is off, all elements measure off except one is on to a small degree. This heats the water and trips the cutoff for that core after so many minutes. I figure either the element's triac or its varistor is leaking. The gate signal on the triac looks the same as the others.

I bought this unit about 10 years ago because all the parts are replaceable. However, the controller was discontinued earlier this year. I called the manufacturer, which had one and sent it to me. I figure I could replace the board, then repair the original to use as a spare. However, the new board also has a similar problem to a worse degree: it goes to thermal cutoff much faster. The replacement board may have been used - the antistatic bag shows signs of it having been previously opened.

I want to replace all the triacs and varistors on both old and new boards. The triacs are by STMicroelectronics marked "BTA41 BSE" but all I see online are BTA41 600's to 800's. Can I replace these with 600's. The water heater is 240VAC.


r/AskElectronics • • 10h ago

AliExpress actuator driver died after 2nd power-on — repair help?

0 Upvotes

I bought an actuator on AliExpress. It stopped working literally after the second power-on — there’s no communication with the driver over either UART or CAN. My PSU outputs a stable 48 V, and I couldn’t have reversed polarity because the connector doesn’t allow it. There’s a review on the product page with exactly the same problem, so it’s probably a defective unit. I got refunded, but I’d like to repair the driver.

I didn’t find any visible damage. When powered, LED1 (power indicator) turns on. LED2 (status indicator, apparently MCU-controlled) doesn’t light, although it should. Besides a multimeter, I also have a basic oscilloscope and a logic analyzer. I tried to read and write down all the markings on the SMD components.

I probed around with a multimeter. The CAN driver and transceiver get 3.3 V, but the MCU does not. I also found an SWD header. VCC on that header should have 3 V, but there’s almost nothing there. I also found it suspicious that resistance between VCC and GND is close to a short. It probably is a short. I’m not sure where to go next.


r/AskElectronics • • 1d ago

LC Voltage Spikes on small SMPS

8 Upvotes

I am using one of these little Pololu switchers on a project.
https://www.pololu.com/product/5592

At the bottom they mention "When connecting voltage to electronic circuits, the initial rush of current can cause voltage spikes that are much higher than the input voltage. If these spikes exceed the regulator’s maximum voltage (36Ā V), the regulator can be destroyed. In our tests with typical power leads (~30″ test clips), we observed spikes approaching 36Ā V at input voltages approaching 20Ā V.Ā "

That's pretty serious!

They recommend "An electrolytic capacitor (33 μF is a good starting point)" in parallel with the Vin and ground. That feels pretty generic. Also , a 33 uF electrolytic with 50v rating is HUGE compared to that switcher, so that sucks for small projects.

The power cable on my project would probably be closer to 4 inches instead of 30", and my supply would be between 12V to 18V, so both those things are more "friendly" than 30 inch leads with 20 volts.

Do I really just need to roll the dice and make my PCB without the cap and see what happens on the scope? Or can I predict this somehow better than "33 uF is a good starting point".

Thanks, Mike


r/AskElectronics • • 13h ago

What are this called .I removed them on my cyclone 2 because was not charging anymore.They are to much burned I can't read them.

Thumbnail
gallery
0 Upvotes

r/AskElectronics • • 1d ago

New power supply, what are these cables?

Post image
34 Upvotes

Just got my first desktop power supply and I’d like to use it for a few things like powering drones and my soldering iron directly.

Can I get those male ends for making custom cables? I mean the end of the cord that’s not an alligator clip. What are they called?

Thanks!

Edit: thanks for this! I’ll grab some banana clip ends. :)


r/AskElectronics • • 17h ago

Can someone identify me this type of LED?

Thumbnail
gallery
2 Upvotes

It's from Skoda Rapid 2 DRL. I need to replace them. Thanks for any help


r/AskElectronics • • 14h ago

How should you wind a transformer for an Armstrong oscillator

1 Upvotes

I’m trying to make an am transmitter using an Armstrong oscillator but I can’t find any photos of the coils only that they’re loosely coupled so do I wind them over each other, next to each other, one covering half of the other? I know the tickler has to be RF frequency but does the tank coil have to be like a couple thousand turns or like 10?