r/Autobody • • 4h ago

Question about the Trade What are some insurance company tricks/scams on CCC?

Post image
0 Upvotes

ETA: YES it’s a clear coat cap. My ADD got the best of me before I finished matching the supplement.

Why doesn’t this bumper have clear coat time? No, it’s not textured. I know a little about base coat reductions and how to beat/check their privilege 😂 but I want to know about clear coat caps, and as a non-DRP how can I beat this scam?
Also open to those who want to share other sneaky things they’ve seen whether CCC or Mitchell


r/Autobody • • 19h ago

Is there a process to repair this? Figured out why you never get lazy with the filler primer stage 😅

Post image
0 Upvotes

This is my first big painting project on my 2010 Honda fit sport and I definitely did not do enough sanding on the filler primer before paint and now I’m gonna have to order more (btw I’m doing this full rattle can because I don’t have the budget for a full paint gun booth setup or an air compressor


r/Autobody • • 22h ago

HELP! I have a question. Free car given with HIGH mileage. It was rear ended before it was given off. What sort of work is worth doing DIY?

Thumbnail
gallery
6 Upvotes

I mostly just want the trunk and left blinker functional and secure without tape. Water doesn't seem to leak into the trunk easily, but I want to make sure the trunk has a secure seal when closed. Looking at the brake light assembly holes, it seems I just need a new assembly and it would fit in spite of the body damage. Might be willing to replace the bumper with a junkyard bumper of the same color if I get lucky. I wanted to know what work would be worth doing especially pertaining to the light and the trunk.


r/Autobody • • 21h ago

Acceptable quality? Rear Rail Bent - Accident

Post image
23 Upvotes

Shop says they’ll pull it out and stretch and it’ll be fine. Thoughts? I thought it’d be totaled.

2024 Ford Maverick

Another angle:

https://imgur.com/a/B4NYdS3

Cross Posted


r/Autobody • • 14h ago

HELP! I have a question. Need advice on denting

Thumbnail gallery
0 Upvotes

r/Autobody • • 3h ago

HELP! I have a question. Is this damage from a deer coming out on the highway and hitting the side of my car?

Thumbnail
gallery
33 Upvotes

Lent the car to my kid and its the story I got from her.


r/Autobody • • 22h ago

RUST Roof Visor Rust

Post image
0 Upvotes

Just got a new to me truck that's mostly rust free (comparatively here in MI)

What is the best plan to take care of these spots this winter? I have another car, so spending a few weeks in the garage isn't an issue. Want to do this now as I neglected another truck in the past, and it rotted away quickly.


r/Autobody • • 4h ago

HELP! I have a question. 2010 Hyundai i20 paint issue in rain

Thumbnail
gallery
0 Upvotes

I recently got my first car and i’ve noticed that when it rains my drivers side door gets this white cloudiness come up along the edge of the doorway and it fades into the centre of the door.

Does anyone know what this is and how i could fix it myself? Thanks!


r/Autobody • • 27m ago

HELP! I have a question. Scratches on Ford Ranger Need Help

Post image
• Upvotes

Hello!

I bought a Ford Ranger on Carvana and it came with this scratch. It doesn’t seem to get caught on my fingernail and almost seems to be on the smoother side. The truck has less than 1k miles and is practically mint except for this and it’s so defeating because the photos on Carvana didn’t do this scratch justice for how it looks in-person. I called a shop and they said $500 for a three step paint correction. Does that seem fair? Could I buff this out myself? Never cared about scratches on a truck but this is an eyesore for a new vehicle.


r/Autobody • • 3h ago

HELP! I have a question. My car got hit by a tow truck while it was already at a body shop for something else. I think I’m being lied to by the shop

Post image
2 Upvotes

I was in an accident on 10/8 and my car has been at a body shop since. On 11/17 this week I called for an update. The receptionist said she needed the mechanic to call me back.

Hours later he called back stumbling on a bunch of excuses. The week of 11/4, a rollback hit my car while apparently trying to get to a car behind it. The body shop ordered 2 hoods (one used and one aftermarket) that both came damaged so they couldn’t use them. Allegedly, the Mazda hood is on back order until 12/12. They at that point still didn’t tell me anything had happened to my car.

Of course I’m livid. The insurance company stopped paying for my rental car two weeks ago when the original work was done. I was charged $600 yesterday and $52 today for it. The owner of the body shop said “don’t worry we’ll take care of it all” after I said I wanted the insurance company for the tow truck.

They don’t have the tow truck’s info. It wasn’t caught on camera and the auction company that bought the car he was actually there to pick up doesn’t know who picked it up (I don’t believe that).

Also, the car is AWD. I think if he moved my car to get to the car behind it, he didn’t put it on dollies and just dragged it.

When I spoke to the owner, a hood from a local Mazda dealer magically had appeared at their store the same day I found out anything had happened to my car.

I sent an email asking about the dollies, if there was additional damage beyond the hood, I asked for the invoice from the local Mazda dealer, and I asked for the company name who bought the car behind mine so I can try to track the tow truck down.

Am I missing something? Are they lying to me? I get it’s an easy story if they could have just sourced me a hood and told me when it happened this wouldn’t be an issue but what the fuck is going on here? It’s a local respected shop.


r/Autobody • • 23h ago

Project time! Paint booth upgrade! Air refrigerator/dryer.

Thumbnail
gallery
2 Upvotes

Well we were tired of the air condensing at the gun regulator, something that happens and you don’t realize it! Air humidity is the bane of paint guns as even though the air does not have visible moisture in it, as it passes through the regulator at the gun the temperature drops dramatically causing condensation, at the gun. IE water in the paint! This is past any water traps, as the moisture is in the air as humidity, not water droplets. The only solution is to dry the air to a dew point below the temperature it will reach as it goes through the gun regulator.

Of course all of this is outside of the actual booth. As you can see it go through the wall after being regulated.


r/Autobody • • 21h ago

HELP! I have a question. Does this look totaled? 2023 Camry SE under 30k miles airbags never went off

Thumbnail gallery
0 Upvotes

r/Autobody • • 5h ago

HELP! I have a question. Please help! Dads gonna whoop me

Thumbnail
gallery
0 Upvotes

Hey! So I went to Road Runners in Pontypridd (Wales), got my break pads, disks, shoes and caliper changed, got it back and once I got home from the garage the door striker literally fell to my feet after picking the car up. They put a new one on the next day, as mine had some huge evil scratches (I'll add a pic). Since they put it on I've been unable to open my rear passenger door. Ive spent loads of money and had the worst time with them.

I just need advice guys, I'm really scared my dad's actually gonna whoop me over this. I'm gonna add some pics | just need as much help as possible pls.
(1st pic is the gap between driver and passenger doors.
2nd is the amount the rear passenger door will open if the drivers is shut.
3rd is the view of the gap between the two doors when rear passenger is fully open
4th striker scars from door).

It's a Nissan qashqai 2012, yes the driver side has been replaced due to an accident, yes it was working completely find before the garage

The garage refused to take any sort of accountability and say it was my dad's fault for the alignment of the door he replaced. Even though the rear passenger door would open and shut perfectly fine before. They fixed my driver door striker and now I cant open my rear passenger door unless the drivers is open.


r/Autobody • • 5h ago

RUST Undercarriage condition and maintenance advise

Thumbnail
gallery
2 Upvotes

I have some concerns about the undercarriage of my vehicle (2013 forester) and wanted to see what y'all had to say about it and the best steps forward. The exhaust pipes and shielding will obviously need to be replaced in the near future, but I wanted to see what the best course of action would be for the rest of the components, the only rust on the frame that I was able to locate that is flaking is on the muffler attachment points. My current idea is to wirebrush, seal and paint the areas of concern and continue to monitor. Any advice would be appreciated.


r/Autobody • • 2h ago

HELP! I have a question. Car rust

Thumbnail
gallery
2 Upvotes

How bad is this rust? Is it repairable? And if I don’t repair it will it eventually cause the bumper to fall off.


r/Autobody • • 3h ago

HELP! I have a question. 2007 chevy cobalt bumper bracket repair

Thumbnail
gallery
2 Upvotes

earlier this week i rear ended someone and my 07 took it like a champ. most everything is intact except for this piece being bent. i am not a car person but i know how to do some things. this looks like welding the frame might be a solution but i was wondering if i could do anything that would be easier.

in a perfect world i could buy a replacement part and bolt it in, but im not sure thats possible with this piece. any advice would be appreciated!


r/Autobody • • 3h ago

Is there a process to repair this? Need advice on how too fix this inward bowing around the weld

Thumbnail
gallery
5 Upvotes

This is a 1989 hilux bed i wanne use as little body filler as possible on this i welded in new fenders because the old ones were rusted through but i got this dib right on/ next too the weld along the top side of the fender any advice too fix it is welcome


r/Autobody • • 4m ago

HELP! I have a question. Customer wants italian flag colors on his car, any pointers for how to find these specific colors?

Post image
• Upvotes

Currently I'm just going through the PPG linq system and production painting books that I have, but nothing seems quite right.


r/Autobody • • 6h ago

Project time! Ohh boy, here we go lol

11 Upvotes

r/Autobody • • 6h ago

Tools New Norton Paint Cup system...

Thumbnail
gallery
2 Upvotes

New system


r/Autobody • • 21h ago

RUST Rust repair and concerns

Thumbnail
gallery
2 Upvotes

I have concerns of the rust underneath this car specifically around the pinch weld and was wondering if thats a repair that can be done?