r/Autobody • u/MC-OttawaDude • 4h ago
HELP! I have a question. Is this damage from a deer coming out on the highway and hitting the side of my car?
Lent the car to my kid and its the story I got from her.
r/Autobody • u/MC-OttawaDude • 4h ago
Lent the car to my kid and its the story I got from her.
r/Autobody • u/chrisgk12 • 22h ago
Shop says they’ll pull it out and stretch and it’ll be fine. Thoughts? I thought it’d be totaled.
2024 Ford Maverick
Another angle:
Cross Posted
r/Autobody • u/Willgetyoukilled • 23h ago
I mostly just want the trunk and left blinker functional and secure without tape. Water doesn't seem to leak into the trunk easily, but I want to make sure the trunk has a secure seal when closed. Looking at the brake light assembly holes, it seems I just need a new assembly and it would fit in spite of the body damage. Might be willing to replace the bumper with a junkyard bumper of the same color if I get lucky. I wanted to know what work would be worth doing especially pertaining to the light and the trunk.
r/Autobody • u/3dmonster20042004 • 5h ago
This is a 1989 hilux bed i wanne use as little body filler as possible on this i welded in new fenders because the old ones were rusted through but i got this dib right on/ next too the weld along the top side of the fender any advice too fix it is welcome
r/Autobody • u/notu22222 • 3h ago
How bad is this rust? Is it repairable? And if I don’t repair it will it eventually cause the bumper to fall off.
r/Autobody • u/_faye___ • 4h ago
earlier this week i rear ended someone and my 07 took it like a champ. most everything is intact except for this piece being bent. i am not a car person but i know how to do some things. this looks like welding the frame might be a solution but i was wondering if i could do anything that would be easier.
in a perfect world i could buy a replacement part and bolt it in, but im not sure thats possible with this piece. any advice would be appreciated!
r/Autobody • u/Stalefishology • 5h ago
I was in an accident on 10/8 and my car has been at a body shop since. On 11/17 this week I called for an update. The receptionist said she needed the mechanic to call me back.
Hours later he called back stumbling on a bunch of excuses. The week of 11/4, a rollback hit my car while apparently trying to get to a car behind it. The body shop ordered 2 hoods (one used and one aftermarket) that both came damaged so they couldn’t use them. Allegedly, the Mazda hood is on back order until 12/12. They at that point still didn’t tell me anything had happened to my car.
Of course I’m livid. The insurance company stopped paying for my rental car two weeks ago when the original work was done. I was charged $600 yesterday and $52 today for it. The owner of the body shop said “don’t worry we’ll take care of it all” after I said I wanted the insurance company for the tow truck.
They don’t have the tow truck’s info. It wasn’t caught on camera and the auction company that bought the car he was actually there to pick up doesn’t know who picked it up (I don’t believe that).
Also, the car is AWD. I think if he moved my car to get to the car behind it, he didn’t put it on dollies and just dragged it.
When I spoke to the owner, a hood from a local Mazda dealer magically had appeared at their store the same day I found out anything had happened to my car.
I sent an email asking about the dollies, if there was additional damage beyond the hood, I asked for the invoice from the local Mazda dealer, and I asked for the company name who bought the car behind mine so I can try to track the tow truck down.
Am I missing something? Are they lying to me? I get it’s an easy story if they could have just sourced me a hood and told me when it happened this wouldn’t be an issue but what the fuck is going on here? It’s a local respected shop.
r/Autobody • u/Smith8464 • 6h ago
I have some concerns about the undercarriage of my vehicle (2013 forester) and wanted to see what y'all had to say about it and the best steps forward. The exhaust pipes and shielding will obviously need to be replaced in the near future, but I wanted to see what the best course of action would be for the rest of the components, the only rust on the frame that I was able to locate that is flaking is on the muffler attachment points. My current idea is to wirebrush, seal and paint the areas of concern and continue to monitor. Any advice would be appreciated.
r/Autobody • u/jaythaironlung • 7h ago
New system
r/Autobody • u/TheIceTrain1 • 22h ago
I have concerns of the rust underneath this car specifically around the pinch weld and was wondering if thats a repair that can be done?
r/Autobody • u/Pizza420Rat • 1h ago
Currently I'm just going through the PPG linq system and production painting books that I have, but nothing seems quite right.
r/Autobody • u/Inner-Bee9296 • 5h ago
Hi, I am out a mirror cap on my Subaru ascent. See photos. The price the dealership quoted me pre paint was absolutely insane. So looking for a more affordable option and came across paintedoemparts.com. Anyone have any experience with them? Are they a reliable company for something like this?
r/Autobody • u/Outrageous_Glass8446 • 6h ago
A-tech here in northern virginia looking to negotiate a yearly raise. Looking to do a little market research & see what others are making in the area. For context I am a platinum I-car certified tech who turns 100-125 hours weekly. Out of my shop I tend to get more of the bigger hits & special material repairs so referencing other co works feels a bit irrelevant. I’m currently at 27/hr. Factoring for cost of living this feels low compared to other areas I see posted about in similar discussion forums. Any feedback is appreciated.
r/Autobody • u/blazen66 • 20h ago
Hello,
I'm looking at this 2012 Nissan NV passenger van to possibly purchase. It's got low miles for the year (about 58k). Taking a peek at the underside... I'm unsure of how much rust is too much. Would love some input from this sub. From what I can tell, it's spent most of its life in NY 🧂. So I definitely expected some rust. Thanks in advance!
r/Autobody • u/Hazza_775 • 20h ago
Resprayed the spoiler on my car as it was sun-damaged and I’m looking to sell.
Overall I’m pretty happy with the results as I’ve never tried anything like this before (before and after pictures included) and it definitely looks better than before.
But for future learning, I’m just trying to figure out what caused this spiderweb pattern? My process was as follows:
- 600 grit hand sand entire area
- 5 Light/medium rattle can base coats (pattern appeared on third coat)
- 3 coats of rattle can clear coat
- 1500 hand wet sand, followed by machine polish with cutting compound
- All drying times were to spec
Like I say I’m happy with it just trying to figure out what I could do better next time.
Cheers
r/Autobody • u/basednewenglander • 20h ago
I’m sure this page gets a lot of posts about scratches, but I was wondering if anyone has any advice on how to remove these marks from my hood. Thanks in advance!
r/Autobody • u/xXDallasStarXx • 1h ago
My buddy scratched up my shit pretty bad, haven’t really messed around with this sorta stuff but I’m giving it a shot. The paints coming back fine but what’s the best method to getting everything flush and not have these ridges and bumps? I’m going to address the dents later when it gets warmer but I’m trying to just get it looking okay, any ideas? I’ve been sanding with 600/800 with a hand sander
r/Autobody • u/Top-Security-2998 • 16h ago
r/Autobody • u/RyanNotoriouseYT • 20h ago
This is my first big painting project on my 2010 Honda fit sport and I definitely did not do enough sanding on the filler primer before paint and now I’m gonna have to order more (btw I’m doing this full rattle can because I don’t have the budget for a full paint gun booth setup or an air compressor
r/Autobody • u/SojaplinStudios • 1h ago
Hello!
I bought a Ford Ranger on Carvana and it came with this scratch. It doesn’t seem to get caught on my fingernail and almost seems to be on the smoother side. The truck has less than 1k miles and is practically mint except for this and it’s so defeating because the photos on Carvana didn’t do this scratch justice for how it looks in-person. I called a shop and they said $500 for a three step paint correction. Does that seem fair? Could I buff this out myself? Never cared about scratches on a truck but this is an eyesore for a new vehicle.
r/Autobody • u/ClientTop2224 • 6h ago
I recently got my first car and i’ve noticed that when it rains my drivers side door gets this white cloudiness come up along the edge of the doorway and it fades into the centre of the door.
Does anyone know what this is and how i could fix it myself? Thanks!
r/Autobody • u/Creative-Dentist3276 • 22h ago
r/Autobody • u/Dsmchick717 • 5h ago
ETA: YES it’s a clear coat cap. My ADD got the best of me before I finished matching the supplement.
Why doesn’t this bumper have clear coat time? No, it’s not textured. I know a little about base coat reductions and how to beat/check their privilege 😂 but I want to know about clear coat caps, and as a non-DRP how can I beat this scam?
Also open to those who want to share other sneaky things they’ve seen whether CCC or Mitchell
r/Autobody • u/jamie0246 • 6h ago
Hey! So I went to Road Runners in Pontypridd (Wales), got my break pads, disks, shoes and caliper changed, got it back and once I got home from the garage the door striker literally fell to my feet after picking the car up. They put a new one on the next day, as mine had some huge evil scratches (I'll add a pic). Since they put it on I've been unable to open my rear passenger door. Ive spent loads of money and had the worst time with them.
I just need advice guys, I'm really scared my dad's actually gonna whoop me over this. I'm gonna add some pics | just need as much help as possible pls.
(1st pic is the gap between driver and passenger doors.
2nd is the amount the rear passenger door will open if the drivers is shut.
3rd is the view of the gap between the two doors when rear passenger is fully open
4th striker scars from door).
It's a Nissan qashqai 2012, yes the driver side has been replaced due to an accident, yes it was working completely find before the garage
The garage refused to take any sort of accountability and say it was my dad's fault for the alignment of the door he replaced. Even though the rear passenger door would open and shut perfectly fine before. They fixed my driver door striker and now I cant open my rear passenger door unless the drivers is open.