r/CMFTech • u/coatti29 • 1h ago
Watch Pro CMF Watch Pro (Gen 1) update: my watch died, so I built an emulator that runs the real firmware and talks to the official app on an Android emulator
TL;DR: My CMF Watch Pro Gen 1 died (hardware failure), so I built an emulator that runs the exact stock firmware and connects over virtual Bluetooth to the official CMF/Nothing X app running on an Android emulator. With it I added notification replies (the Gen 1 never had them) and a timer that rings with the screen off.
The setup. It's not a UI mock-up: the emulator runs the real firmware image instruction by instruction. It boots by itself to the stock watch face, keeps time, goes into deep sleep and wakes up like the real watch. On the other side there's a normal Android emulator with the official app. The app pairs with the emulated watch, syncs the time and forwards notifications, exactly as with a real watch.
Image 1 is the whole round trip, no phone or watch involved:
- an SMS arrives on the Android emulator;
- the official app forwards it to the emulated watch;
- on the watch I tap Reply and pick a canned answer;
- the official app on the phone sends the SMS.
Reply to notifications. The Pro 2 / Watch 3 Pro have quick replies, the Gen 1 doesn't, but the official app turns out to accept a reply from it. So I added a Reply button to the stock message popup and to the notification shade. The labels are in Italian for now, I'm Italian š.
Background timer. The stock timer stops as soon as you leave its screen. Now you can start it, go back to the watch face and let the screen turn off. When time is up the watch wakes up, turns the screen on and shows the stock "time's up" screen with vibration.
ā ļø Everything new has only run in the emulator so far: my watch is dead, and nothing gets flashed before it's tested on real hardware.
Next: the Watch 3 Pro, whose firmware turns out to be a close relative of the Gen 1.
As before, I'm not sharing firmware binaries, how I got them, or pairing keys. Happy to answer questions!