r/CMFTech • • 15h ago

Watch Pro 2 Music app for CMF watch pro 2

26 Upvotes

It has two parts: a Watch Music app on the watch and a phone app.

The music isn't stored on the watch. The watch sends commands to the phone app, and the phone app opens the song or podcast in your watch.

Phone app has a working

- Contacts

- Notifications (quick reply not working)

- Weather

- Alarms

- Find My Phone

- AI button and camera button

So You can start music or podcasts from anywhere, straight from your wrist.

Setup steps and downloads are here: https://github.com/abdalrahmanmamdouh2004-svg/CMF-Music-app-


r/CMFTech • • 4h ago

Watch Pro CMF Watch Pro (Gen 1) update: my watch died, so I built an emulator that runs the real firmware and talks to the official app on an Android emulator

Post image
8 Upvotes

TL;DR: My CMF Watch Pro Gen 1 died (hardware failure), so I built an emulator that runs the exact stock firmware and connects over virtual Bluetooth to the official CMF/Nothing X app running on an Android emulator. With it I added notification replies (the Gen 1 never had them) and a timer that rings with the screen off.

The setup. It's not a UI mock-up: the emulator runs the real firmware image instruction by instruction. It boots by itself to the stock watch face, keeps time, goes into deep sleep and wakes up like the real watch. On the other side there's a normal Android emulator with the official app. The app pairs with the emulated watch, syncs the time and forwards notifications, exactly as with a real watch.

Image 1 is the whole round trip, no phone or watch involved:

  1. an SMS arrives on the Android emulator;
  2. the official app forwards it to the emulated watch;
  3. on the watch I tap Reply and pick a canned answer;
  4. the official app on the phone sends the SMS.

Reply to notifications. The Pro 2 / Watch 3 Pro have quick replies, the Gen 1 doesn't, but the official app turns out to accept a reply from it. So I added a Reply button to the stock message popup and to the notification shade. The labels are in Italian for now, I'm Italian 🙂.

Background timer. The stock timer stops as soon as you leave its screen. Now you can start it, go back to the watch face and let the screen turn off. When time is up the watch wakes up, turns the screen on and shows the stock "time's up" screen with vibration.

⚠️ Everything new has only run in the emulator so far: my watch is dead, and nothing gets flashed before it's tested on real hardware.

Next: the Watch 3 Pro, whose firmware turns out to be a close relative of the Gen 1.

As before, I'm not sharing firmware binaries, how I got them, or pairing keys. Happy to answer questions!


r/CMFTech • • 13h ago

Buds 2a CMF Buds 2a owners, is this normal?

Post image
6 Upvotes

I've been using my CMF Buds 2a for around 8 months, and I'm noticing a pretty weird battery imbalance.

As you can see in the screenshot, the left earbud is at 65%, while the right one is already down to 20%.

I'm wondering if this is a battery degradation issue, a software bug, or something related to the charging case.

Would love to hear your experiences and suggestions. Is there anything I can try before going for a warranty claim?


r/CMFTech • • 13h ago

Buds 2a need help for buying tws around 2k range

Post image
5 Upvotes

Hey everyone! I'm considering getting the CMF Buds 2a and would love to hear your experience.

How are they holding up in the long run? How's the overall performance, and most importantly, is battery drain an issue?

Would you recommend them for long-term use? Any honest opinions or alternatives are welcome. Thanks!


r/CMFTech • • 5h ago

Buds 2a The left side dies faster than the right side

1 Upvotes

Same as the caption.Is there any way to solve the problem or do I need to replace it?

The left side dies twice as fast.


r/CMFTech • • 6h ago

Buds 2a CMF Buds 2a left earbud suddenly dies despite showing 80% battery

1 Upvotes

Hey everyone,

I'm having a strange battery issue with my CMF Buds 2a, specifically the left earbud.

It used to work perfectly fine, but recently it started randomly disconnecting even when the battery level shows around 80%.

Here's what's happening:

The left earbud suddenly stops working while I'm listening to music.

When I reconnect it to my phone, the battery level suddenly drops to around 10%.

If I put it back in the charging case for just 2 minutes, it shows around 60% again.

However, it disconnects again shortly afterward.

I've even charged the earbuds for 2 hours, but the left earbud couldn't play music for more than 30 seconds.

The right earbud works perfectly fine.

Has anyone experienced something similar with their CMF Buds 2a? Could this be a faulty battery or a charging circuit issue?

I'd appreciate any suggestions. Thanks!


r/CMFTech • • 6h ago

Buds 2 Plus Mic not working any solution????

Post image
1 Upvotes

Buds 2 plus mic not working after 9 months any solution please 🙏😭


r/CMFTech • • 8h ago

Speaker S / M CMF speakers to tv/xbox

Post image
1 Upvotes

Hi guys, today i finally got my hands on the speaker M, loving it a lot so far. my question is how to connect it to a tv or the xbox? A bluetooth adapter to a tv would do it?


r/CMFTech • • 9h ago

Community project I made an unofficial Nothing X desktop companion for my CMF Buds Pro 2

1 Upvotes

I like my blue CMF Buds Pro 2, but I wanted to change their settings from my computer without reaching for my phone. I've been building a desktop companion for that.

Nothing X brings supported ANC/transparency controls, EQ presets, Ultra Bass, spatial audio, low-latency mode and device settings to Linux and macOS. There's a full window, themes, tray/menu-bar access, and a desktop widget for the essentials. COSMIC also gets a native panel applet.

The current release is 0.6.1. Linux downloads are a Flatpak bundle and a separate COSMIC applet; macOS has .app/.dmg downloads for Intel and Apple Silicon.

This is an unofficial project, not Nothing's own desktop app. My CMF Buds Pro 2 are the main development hardware. Other Nothing/CMF profiles are included, but features depend on model and firmware, and not every device has been physically tested. Case battery is shown when reported, with cached readings marked rather than pretending the closed case provides live telemetry.

Source, screenshots and setup: https://github.com/basanta-bhandari/Nothing-x

Downloads: https://github.com/basanta-bhandari/Nothing-x/releases/tag/v0.6.1

Try the interface with simulated data: https://basanta.cc/nothing-x/

If you try it, I'd love to know your device model, firmware and desktop OS, and which controls work or need attention.I like my blue CMF Buds Pro 2, but I wanted to change their settings from my computer without reaching for my phone. I've been building a desktop companion for that.


Nothing X brings supported ANC/transparency controls, EQ presets, Ultra Bass, spatial audio, low-latency mode and device settings to Linux and macOS. There's a full window, themes, tray/menu-bar access, and a desktop widget for the essentials. COSMIC also gets a native panel applet.


The current release is 0.6.1. Linux downloads are a Flatpak bundle and a separate COSMIC applet; macOS has .app/.dmg downloads for Intel and Apple Silicon.

This is an unofficial project, not Nothing's own desktop app. My CMF Buds Pro 2 are the main development hardware. Other Nothing/CMF profiles are included, but features depend on model and firmware, and not every device has been physically tested. Case battery is shown when reported, with cached readings marked rather than pretending the closed case provides live telemetry.

If you try it, I'd love to know your device model, firmware and desktop OS, and which controls work or need attention.(Would really appriciate a star, fix, or suggestion)

r/CMFTech • • 20h ago

Community project Standby app uhh check it out looks liek nothingOS 5.0 which looks insane woww

Post image
1 Upvotes

sup guys

i made an app which is a standby clock app leik iOS
difference is in design, it has all the icons and fonts from nothingOS

it took wayyy tooo much work but welp ggs here we are right

btw heres tha link, and guys be careful out there take care thanks guyys
https://play.google.com/store/apps/details?id=com.cedarworks.standby&hl=en_US

we gon add more sigma features liek rain and wind ambience so stay tuned for updates, dev is currently near exams and its really messing us up but, wish him luck

its 0.99 $ so its not alat ig for wat too 3ish months

the picture i took was at ikea because i dont have a nice room to take picture yk so i had to go to ikea one day to larp and almost get caught by security. so please make it worth ittt.

sorry for the informal text, its currently past my bedtime and im cooked i have school tmr

yay ig xd


r/CMFTech • • 5h ago

Phone 2 Pro My cmf 2 pro. Is this really bad? I bought the phone 1 year ago

Post image
0 Upvotes

Is this normal or bad? Tell me ur views


r/CMFTech • • 17h ago

Phone 2 Pro Anyone facing issue when using hotspot?

0 Upvotes

For the past 2 months I've been facing this issue whenever I use my mobile hotspot and simultaneously play a competitive multiplayer game or sometimes just a random one my internet connection just gets disconnected and I feel frustrated when this happens

Has anybody faced this issue or if you know any sort of solutions i appreciate your valuable time !