r/CrealityFalconSub • • 20d ago

MakeItYours IKEA FLISAT stool unicorn upgrade

Thumbnail
gallery
7 Upvotes

I gave an IKEA FLISAT stool a bit of a makeover with my Falcon2 Pro 40W.

I engraved a unicorn directly into the wood, but for some parts I wanted more depth than a normal engraving. So I ran the laser several times over the mane and the details around the hooves to create deeper recessed areas.

Those deeper sections were then filled with two-component epoxy resin mixed with glitter.

Settings I used:
Normal lines: 6000 mm/min, 30% power, 2 passes
Deep areas for the epoxy: 2800 mm/min, 60% power, 3 passes

If anyone has tried similar epoxy-filled laser engravings, I’d be interested to see what settings or materials you used. 😁


r/CrealityFalconSub • • 19d ago

MakeItYours Spooky friends!

Thumbnail
gallery
4 Upvotes

Had a busy afternoon making these cute little characters. Brought my vectors into Falcon Design Space and cut the different parts out on the A1C, on 3mm basswood. Then a quick paint with some acrylic markers and stuck the layers together! The witch was quite tricky, but I love how she came out in the end! Love how the A1C has re-ignited my crafting passion! I will be uploading the files to CraftSeek later on!


r/CrealityFalconSub • • 21h ago

Questions / Help Laser positioning

1 Upvotes

I have a falcon a1 pro 20w. Is there was way to see where the laser is positioned so I don’t have to manually move it every time? Like a numerical setting or something. I see in falcon design space there is a processing height thing but it always stays at 0.00.


r/CrealityFalconSub • • 1d ago

Project Showcase Wood inlay clock

Post image
2 Upvotes

This wood inlay clock has a face of Missouri red oak, and the numerals, dots, and hands are purpleheart wood.


r/CrealityFalconSub • • 1d ago

Project Showcase Bringing an old rusty stove back to life with a laser. 🔥

1 Upvotes

r/CrealityFalconSub • • 1d ago

Questions / Help 5W - air assist question

Thumbnail
gallery
1 Upvotes

So I picked up the 5W Creality falcon to try to learn more about laser engraving and cutting. I saw so many people talk about adding the air assist, so I picked that up and got it fitted. Now I am trying to figure out my settings since the air assist nozzle sticks lower than the pre-fixed focus.

Has anyone made this work or do I just need to take the air assist off and save it for some different laser in the future.


r/CrealityFalconSub • • 2d ago

Questions / Help Creality Falcon A1 failing

1 Upvotes

I have a Falcon A1 which is just over a year old. I was cutting some wood today and at about the 99% mark it stopped cutting - half way through the last line.

Now it won't cut or engrave. The head moves to where I think it would start cutting. But then the inside light flicks off for about a second, then comes on again and the unit beeps twice.

Any suggestions on how to proceed?


r/CrealityFalconSub • • 3d ago

Questions / Help Falcon a1 pro rotary kit

2 Upvotes

Hi all. I’m trying to engrave on a small rolling pin. The pin itself is 5inches and the print area is 3 inches. My issue is that the jaws of the chuck are in the way when I try to print. Is there an easy way to mount the rolling pin without having to take it out mid print and flip it around?
I can’t imagine people are engraving on small items such as rings and things using this base kit. Do I need something additional to be able to fix my item in a way where things aren’t blocking the laser? Thank u!


r/CrealityFalconSub • • 3d ago

Work in Progress Basic Cribbage

Thumbnail gallery
4 Upvotes

Basic design done, now to refine it.


r/CrealityFalconSub • • 3d ago

Questions / Help Falcon 10w Doesn't Work

1 Upvotes

I bought this back in August, but finally got around using it, but this is all it does. I tried a USB-C to USB-C Cable and a USB-A to USB-C Cable, and 2 different SD Cards. it doesn't seem to matter.

Any idea what is wrong?


r/CrealityFalconSub • • 4d ago

Project Showcase Alignment guides for Creality Falcon A1 Pro

Thumbnail
gallery
5 Upvotes

I've created parametric guides to center any object on the Creality Falcon A1 Pro's tray.

Download the STL/3mf free on Creality Cloud:

https://www.crealitycloud.com/es/model-detail/creality-falcon-a1-pro-alignment-guides

These guides allow you to position objects in the same way every time, preventing them from shifting during repetitive engraving and cutting tasks. Simply remember the number of side and bottom guides required for each application and tighten them to ensure the object remains firmly in the same position when switching to similar pieces for engraving/cutting.

The guides are placed in different locations; some are specifically for the outer frame, and others for the inner area. The inner guides come in two widths: 2 cm and 1 cm.

These guides have 6x2 magnets on their underside that are added later by applying pressure (the holes have a very tight tolerance so that glue is not needed and they have holes that allow a nail to be inserted to remove the magnets), to ensure that they adhere to the metal sheet of the tray and have a very low height that does not interfere with the laser head.

The 3mf file contains all the guides, placed upside down so that the top surface (where each guide's label is located) will have the texture of the print bed. You can print as many guides as you need for each application. I've also included a second 3mf guide with small 12x2 magnet guides to hold the JIGs.

In the photos, you can see that in addition to the guides, I have 0.5mm aluminum sheets on the tray with crosshairs marked on them with a marker. These crosshairs indicate the center position of the camera lens and the point where the laser for the A1 Pro's autofocus hits. I used these sheets for testing until I achieved optimal calibration and for engravings that need to cover the entire front surface of an object and extend beyond the margins, thus avoiding marking the original print tray.

I hope you find this useful and that it helps you use the Creality Falcon A1/A1 Pro more easily and efficiently for repetitive tasks.


r/CrealityFalconSub • • 4d ago

Beginner Smokey

Thumbnail
reddit.com
1 Upvotes

r/CrealityFalconSub • • 4d ago

Parameter Settings Creality Falcon designer and A1C gripes

Thumbnail reddit.com
1 Upvotes

r/CrealityFalconSub • • 4d ago

Project Showcase More psychedelic engraving

1 Upvotes

r/CrealityFalconSub • • 4d ago

Project Showcase Psychedelic engraving

Post image
1 Upvotes

Falcon A1 10w


r/CrealityFalconSub • • 5d ago

Small Business For those of you selling digital laser cutting files, which platforms do you use?

Thumbnail reddit.com
2 Upvotes

r/CrealityFalconSub • • 5d ago

Project Showcase Weld it. Cut it. Clean it. All with one handheld laser. 🤯​

1 Upvotes

r/CrealityFalconSub • • 6d ago

Project Showcase Falcon T1 + 60W MOPA engraves incredibly fast if you are used to cartesian diode lasers

8 Upvotes

Engraving a spirograph on a metal business card at 8000mm/s. The patterns also look cool when engraved with a diode laser but the T1 is obviously much faster. You can generate the patterns there.


r/CrealityFalconSub • • 6d ago

Questions / Help AYUDAAAAA POR FAVOR CON MI CREALITY FALCON A1 PRO 20W

0 Upvotes

Hola a todos, estoy iniciándome en el corte y grabado láser y tengo una Creality Falcón A1 Pro de 20W, quiero cortar nombres, estoy usando MDF de 3mm y no logro cortar nada, la máquina solo me graba y delinea la imagen, he usado los parámetros que trae el soft y nada. Ayuda


r/CrealityFalconSub • • 6d ago

Craft I Made Winter Lamp

Thumbnail
gallery
5 Upvotes

I tried something a little different with colored lantern paper for this winter project.
Normally, I use lantern paper behind designs that I cut out of wood. This time, I decided to engrave the lantern paper itself and make the paper the main part of the design.

The interesting part is how the paper reacts to the laser. Instead of getting darker like a normal engraving, the engraved areas lose their color and turn almost white. That works really well for winter scenes, especially for snow, trees and other bright details on a colored background.

I used my Falcon2 Pro in 22W Precision Mode for the paper:
6000 mm/min, 20% power

To keep the lantern standing nicely, I also made a small round base from solid wood. For that I switched the machine back to 40W mode and cut the stand at:
120 mm/s, 100% power, 1 pass

That was enough to cut through the wood in a single pass.


r/CrealityFalconSub • • 6d ago

Questions / Help overheating help

0 Upvotes

hey yall, hoping i can get some help with an issue that just started up today. i have a falcon a1 pro, been putting it to work lately but today it started giving me an overheating alert. this is the first time ive seen it. ive had days where ive ran it for almost the entire day with no issues like that. today i barely could make it through a 30 minute project without it stopping. i cleaned the fan and laser as best i could (im still a little new so let me know if theres a cleaning technqiue i NEED to be doing). but even after cleaning it still gave me the alert. i use the falcon design space program for my files and i know they just had an update idk if THAT could be causeing something. wouldnt THINK it would but could be something idk.


r/CrealityFalconSub • • 7d ago

Craft I Made 🎄 430 mm Display Tree for Chocolates and Candies — Notch Assembly 🪵

Thumbnail
gallery
1 Upvotes

Hi! 👋

Here is my latest creation: a tiered display tree with a total height of 430 mm, made from 3 mm basswood 📐.

  • Material: Cut from 3 mm basswood.
  • Functionality: Trays at each level to place delicious candies or chocolates 🍬🍫.
  • Assembly: Interlocking via notches with a bit of glue for a permanent fix 🔗.
  • Detail: A lovely star at the top to complete the seasonal spirit ⭐.

🛠️ Equipment used: I completed this project using the Creality Falcon A1C 10W. If you’d like to see the exact laser setup I use, you can find it here: https://crealityfalcon-laser.com/4iKa6DJ (Affiliate link)


r/CrealityFalconSub • • 8d ago

Questions / Help Looking for a broken/dead Creality Falcon 2 22W module for parts

Thumbnail reddit.com
1 Upvotes

r/CrealityFalconSub • • 8d ago

Work in Progress Working on a new design and I'm kind of obsessed how cute it is 🤭

Post image
1 Upvotes

r/CrealityFalconSub • • 8d ago

Project Showcase Boss said: Weld it. Clean it. Cut it. 😂​Me: 1 Machine. 😎

2 Upvotes