r/CustomKeyboards • • 1d ago

Porcelain & Forged Carbon CLACK! Taka60 v2 Build w/ Ceramic Keycaps

Thumbnail
gallery
38 Upvotes

Build Specs:

Case: Taka60 v2 (e-white, 60%)

PCB: LH60 PCB

Plate: Forged Carbon Fiber Plate

Switches: Snow Top Cocoa Switches

Keycaps: 'Chun He Jing Ming' Ceramic Keycaps


r/CustomKeyboards • • 1d ago

My modular split keyboard is half built. Here’s what went wrong

Thumbnail
gallery
5 Upvotes

so I'm continuing with this build: Link to previous post

This time I have real hardware to show, a few things that didn't go to plan, and a question for you at the end.

Where it stands: last time, the boards only existed in KiCad. Now they're made, and the first half is partly soldered. That's picture1 is the render of where it's heading. You can see where I am taking the project , and at what phase it is right now in picture 2 and picture 3 . I planned to print the case next, but that didn't work out. The USB-C boards I bought for the module docks are more than twice the size I designed around, so the case is getting one more revision first (refet to Picture 4).

What I learned on each part:

Trackball: my first design had its own battery and controller, and it ended up twice as tall as the keyboard. So I took both out. Now the keyboard powers it through the dock, and it sits level with the case. It's also one less thing to charge.

Boards: I changed the trackball after the boards were finished, so they don't carry its wiring. I'll add one diode and four wires by hand on each half. Lesson learned: settle the modules before ordering boards.

Power: I looked at cheaper ESP32 controllers. By my estimate, they'd empty a battery this small in about a day, so I stayed with the nRF52840. I also dropped charging through the docks for this first build. It charges through one USB-C port, which means fewer parts and less wiring.

I've also put the 3D render on a page, if you want a closer look: https://www.kinsetkeys.com/render

What's next: finish soldering both halves, revise the case, then start on the firmware.

One thing I'm still deciding is the battery. A bigger one lasts longer, but it takes space I need for the docks. So here's my question: how often do you charge your wireless keyboard now, and how often would start to annoy you?


r/CustomKeyboards • • 1d ago

Aluminum case for Apex pro TKL

Post image
0 Upvotes

So i was searching for an aftermarket Aluminum cases for this keyboard. I couldn’t find anything does somebody know where i could most possibly get something like that?


r/CustomKeyboards • • 6d ago

Mods are gone. Time to party.

Thumbnail
gallery
284 Upvotes

My endgame.

Class65 v1

JWK Taros switches

Cherry Stabilizers

GMK Analog Dreams

Force break mod and keebmat acrylic tapemod.

Switches lubed with tribosys 3203.

Stabs tuned with krytox 205g0 and dielectric grease.

Ive been using this board daily for 2+ years now. I have the v3 with brass pen tray in my closet but havent found a need to replace the v1 yet. Nice to know i found my endgame and have a v3 of it i can break out whenever. Endgame is real.


r/CustomKeyboards • • 7d ago

ADA on a Senna

Thumbnail
gallery
211 Upvotes

r/CustomKeyboards • • 8d ago

Linedge 65

Thumbnail
gallery
154 Upvotes

Linedge 65

Alu plate

HMX Macchiato V2

GMK Splash

No foam


r/CustomKeyboards • • 8d ago

rukiaworks porsa

Thumbnail
gallery
92 Upvotes

swg prepress
hmx nezuko
cf plate
hotswap pcb
tx ap


r/CustomKeyboards • • 9d ago

Nrd kazemini

Thumbnail
gallery
155 Upvotes

r/CustomKeyboards • • 10d ago

Jane V5.5

Thumbnail
gallery
193 Upvotes

2.5 + 3


r/CustomKeyboards • • 12d ago

TGR Jane V3 Rubrehose Edition – Beige

Thumbnail
gallery
112 Upvotes

⌨️ TGR Jane V3 Rubrehose Edition – Beige

I built this one a while ago, but I thought I'd share it here!

I spent quite a bit of time choosing the keycaps, and I'm really happy with how well the colors match the beige case.

I also uploaded the build process on my YouTube channel. It was a fun build!

Personally, I really like the typing sound, but I've heard that the distinctive resonance of TGR Jane keyboards can be a bit divisive.

What do you guys think? Do you like that signature Jane sound?

Build Specs

Board: TGR Jane V3 Rubrehose Edition (Beige)

Plate: PC

Foam: None

Switches: HMX SnowCrash

Stabilizers: Typeplus

Keycaps: GMK Cream Matcha


r/CustomKeyboards • • 13d ago

Geon Works Frog TKL 8K with Alps SKCM Black (Pine) and SGI 9500900 Dye-Sub Keycaps.

Thumbnail
gallery
100 Upvotes

Build Specs:

Board: Geon Works Frog TKL 8K

Plate: Aluminum

Switches: Alps SKCM Black (Pine)

Keycaps: Silicon Graphics 9500900 Dye-Sub PBT

PCB: Alec Tardy Alpine8K Solder

Mounting Style: Tadpole Mount


r/CustomKeyboards • • 14d ago

Royal Blue Slate Zero

Thumbnail
gallery
137 Upvotes

I just got my Slate Zero yesterday after seeing a proto at Yushakobo in Japan earlier this year and I couldn’t help but post it. This is the Royal Blue anno built with the hotswap PCB, alu plate, case foam only with Nixies swing swapped to 60g TX springs.


r/CustomKeyboards • • 14d ago

Neo60 Core

Thumbnail
gallery
99 Upvotes

Neo60 Core

Alu Plate

HMX Ash

GMK Nervewrecker

No foam

Knight stabs


r/CustomKeyboards • • 15d ago

Singa Unikorn R2.2 Reseda w/ GMK SoWaRe R2

Thumbnail
gallery
160 Upvotes

r/CustomKeyboards • • 15d ago

PC Kypseli Mini

Thumbnail
gallery
166 Upvotes

r/CustomKeyboards • • 15d ago

Geon Works Frog TKL with Alps SKCM Brown and Arabic FK-2001 Keycaps.

Thumbnail
gallery
112 Upvotes

Build Specs:

Board: Geon Works Frog TKL

Plate: Aluminum

Switches: Alps SKCM Brown

Keycaps: Arabic FK-2001 Double-Shot ABS

PCB: Alec Tardy Alpine8k Solder

Mounting Style: Tadpole Mount


r/CustomKeyboards • • 15d ago

Ramune60 - Ramune Blue Colorway

Thumbnail
gallery
23 Upvotes

My Hatoworks Ramune60 Build:

WK Layout
Hotswap PCB
Standard PP Plate
Blue Cheese v2 Linear Switches (42g)
KBS Mio Soda Pop Keycaps (Base + Journal DLC)


r/CustomKeyboards • • 16d ago

Laminar Leviatán R1

Post image
128 Upvotes

Laminar Leviatán R1 Beige HHKB with HammerWorks CRP.

Everything about this board is fantastic, from the sound to the typing feel, except of finish and QC.

The coating is poor and definitely not worth the $455.

Besides, my Leviatán has a flaw in copper weight because of QC.

Well, you can choose R0 to solve all of them.


r/CustomKeyboards • • 18d ago

My Hato Ramune60 build – such a summery keyboard

Thumbnail
gallery
32 Upvotes

HATO RAMUNE60

Mount : Gasket

Foam : None

Plate : PP

Switches : Keygeek B1

Keycaps : GMK Ramune

It has a nice, bright sound with a crisp, clean feel to it.


r/CustomKeyboards • • 18d ago

My Custom Keyboard Collection & Storage Setup

Post image
31 Upvotes

Here's a little look at my keyboard storage setup!

I have two of these 12-tier storage shelves, along with a few smaller keyboard stands.

I'd love to share more of my custom keyboards here and connect with fellow keyboard enthusiasts!

I'm from South Korea, and I occasionally share videos of my custom keyboard builds on YouTube.

Looking forward to getting to know you all. Nice to meet you!


r/CustomKeyboards • • 18d ago

Cerakoted Neo65

Thumbnail
gallery
76 Upvotes

Not a premium custom by any means, but one I hold close to my heart as it was my first entry into the mechanical keyboard scene. So I decided to give it a little love with a cerakote finish!

Neo65

Cerakoted with Anthracite FX by Cerakote-It in Sydney, Australia.

GMK MTNU WoB

Toro Studios X Wingtree Torrero switches (SS with TX XL 62gm springs)

Aluminium plate

YKIB stabs

Bonus copper weights because why not.


r/CustomKeyboards • • 19d ago

Merisi Dodici x GMK Mictlán

Thumbnail
gallery
198 Upvotes

Merisi Dodici

GMK Mictlán R1 w/ Skulls from R2

Alu Plate

Cherry MX Vints (3203 + TX 0.125mm + Geon 18mm 65g)


r/CustomKeyboards • • 19d ago

TGR Jane v3 AKME Edition

Thumbnail
gallery
131 Upvotes

This is a collaboration keyboard between TGR and the Australian Mechanical Keyboard Expo (AKME) and is 1 of 50 units.

Keycaps are GMK JIS with GMK Gegenschlag. The artisans are TGR brass and GMK Kangaroo that came with the board.


r/CustomKeyboards • • 20d ago

The true best poron gasket fish themed 65%

Thumbnail
gallery
68 Upvotes

Sangeo65

- margo soldered cem3 PCB for that illegal 7u spacebar

- frankenswitch of sp star purple bottom, mx2a top, rbo/full travel stub stems

- alu plate

- gmk cubed

- a real side profile

An oldy but still good


r/CustomKeyboards • • 21d ago

TKC Candybar

Thumbnail
gallery
110 Upvotes

Got this from mechmarket for a pretty decent price although it does come with some weird purple marks that I would like to sand down but idk; probably have to print a r2 2u myself…

Keyboard: TKC Candybar R2 Rock Candy (I believe)
Keycaps: Keykobo BoW, GMK Olive Dark, GMK Centinela
Switches: Came with NAJA Keys TU but didn’t like how they sound so swapped with Cherry Silent Black
Plate: Either PC or PLA