r/ECE • • 51m ago

AMD Hardware CPU intern Technical inteview - UK

1 Upvotes

I have a technical interview with the CPU design verification team (UK). The recruiter said it's CV-focused plus critical thinking. Has anyone done this recently? Was there live coding, SystemVerilog/UVM questions, or mainly CPU concepts? Any tips appreciated!


r/ECE • • 3h ago

[2025 graduate] looking for entry level Embedded engineer opportunities in india

0 Upvotes

Hello everyone!

I'm a 2025 graduate actively looking for entry-level opportunities in embedded systems in india

Technical skills :- C, embedded c,basics c++(opps concepts) ,Esp32,esp8266,c3,s3 modules,stm32,vs code,platform io,git and GitHub,freertos, Linux kernel basics,on-board protocols(UART,spi,i2c), modbus,rs485,wifi,TCP,http,adc/dac,pwm

Preferred locations :- hyderabad, chennai, bangalore

If you want to help dm me!

Thank you for taking the time to read my post !


r/ECE • • 5h ago

PROJECT What electronic components are actually inside a domestic Chinese EV? Xiaomi SU7 headlight driver teardown

54 Upvotes

People often ask what parts actually go into domestic Chinese EVs, so I tore down a Xiaomi SU7 front headlight driver module to see. The back cover looked plain compared to an all-metal Aito M7 unit I opened earlier, almost like a knockoff at first, though that is just how these are made. Heavy glue between the bottom shell and metal front cover forced me to break the back housing apart to get the single-sided PCB out, which only has one external connector on the back.

The board runs on an Infineon CYT2B75CADQ0AZEGS Arm Cortex-M4 automotive MCU for lighting logic, PWM, diagnostics, and protocol stacks, paired with two NXP CAN transceivers—an SOP8 TJA1042 for body network comms and an SOP14 TJA1043 supporting 5 Mbps CAN FD for higher-bandwidth dynamic lighting data. Power and beam control use an MPS MP2019 linear regulator for 12V transients and low quiescent current, an ON Semiconductor NCV70517 microstepping motor driver for AFS adaptive beam adjustment, and a ROHM BD42530 voltage follower with ±10mV offset to track voltage and offset cable drops.

TI chips handle the LED drivers across primary and auxiliary circuits: a TPS92682Q dual-channel constant-voltage LED driver with PWM dimming paired with Diodes Incorporated DMPH4015SPSQ MOSFETs and Good-Ark AMBRP10H100 Schottky diodes for main LED strings, plus three 1.6A TI TPS92520Q dual synchronous buck LED drivers for auxiliary lights like DRLs. There is also another DMPH4015SPSQ P-channel MOSFET and an unidentified SOP8 chip marked 2LZ15.

Overall, the BOM mixes established international suppliers for core control, bus interfaces, and LED drivers with domestic parts like Good-Ark on discrete power components, sitting at the opposite extreme of the Aito M7 hardware setup I saw before.


r/ECE • • 5h ago

CAREER Am I making the right decision?

2 Upvotes

I’m a graduating senior in ECE and secured an offer with Lockheed Martin for a full time position (heard it’s involved troubleshooting in RF team) and an internship (validation/testing) in a major semiconductor company i’ve interned with before. I enjoy both hardware power electronic and silicon level design. If i want to do chip design, i have to get a master at a reputable school like GT or Texas A&M at least, which would rack up my student debt (i currently don’t have any as my goal is graduate debt free). Then hope to get a full time position out of master degree. If I want to do power electronic design, I probably should do a master as well but the degree and school program aren’t strictly required to be had and reputable.
I accepted the internship offer as it also pays similar to my full time position when annualized and it will get me closer to chip design. But i’m getting mixed feeling that i’ve made the wrong decision. I’ve been blessed to have easy interview for all the internship/fulltime interview i had so that’s why i did well. I’m also family oriented and the internship requires 24 hour relocation and full time is 6 hours (both drive). My family likes the fulltime better since it’s closer even though the pay (in MCOL) is even lower than power company pay in my LCOL area.

What would you do? Am I making the right call by betting on the future and master program? Should I just settled for a master at my current school (can complete in 1 year) and work for power, which might involves optical network stuff that i thought is interesting


r/ECE • • 10h ago

ARTICLE Humble Bundle’s Raspberry Pi Collection Review: Includes an Exclusive Cyberdecks Book and 14 More Tech Guides

Thumbnail gamersub.com
1 Upvotes

r/ECE • • 13h ago

Need help choosing between EE and CE for my major

0 Upvotes

Hello! I am currently a high school senior applying for college. I’m having a hard time deciding if I want to major in computer engineering or electrical engineering.

In the first 2 years of high school I thought I would end up doing computer science but ended up realizing that while I do enjoy coding to an extent, it’s not something I want to be doing all the time. I have 4 years of computer science classes including AP compsci and up until recently planned to major in computer science.

I was doing some more research into the differences between computer engineering and electrical engineering and realized that there’s a lot more software and coding with computer engineering than I thought there would be. I would much rather work with hardware, I love building and working with physical things. Electrical engineering sounds appealing but I also really enjoy working with computers and thought I might have an easier chance at getting into college for CE because of my computer science experience.

As for a future career I heard that a lot of EE majors can get jobs in CE positions but it’s harder the other way around? I haven’t thought too much about careers, I would be happy to do anything that involves lots of hands on work building stuff.

Any advice or even personal experiences from either major would be great. If you need any more info lmk.

TLDR: coding is cool but i don’t want to be doing it all the time. i love doing hands on work. pls help my applications are due in 2 weeks


r/ECE • • 14h ago

AMD interview process – two weeks with no update

0 Upvotes

Hey everyone,

I recently interviewed with AMD for a DFT role. I completed both the hiring manager interview and a technical panel interview.

It's been two weeks since my technical interview, and I haven't heard anything back. My application still shows "Under Review," and I've sent polite follow-up emails to the recruiter without receiving a response.

I'm really interested in this opportunity and am wondering if anyone has experienced a similar situation.

  • How long did it take to hear back after your technical interview?
  • Has anyone received an onsite invitation after waiting more than two weeks?
  • Is this fairly normal for AMD's hiring process?
  • Should I be concerned or just remain patient?

I'd appreciate hearing about anyone's experiences. Thanks!


r/ECE • • 15h ago

CAREER Should I keep shooting for summer internships vs grad early and try FT?

1 Upvotes

I have the option of graduating early in Spring 2027 vs as planned in Fall 2027. I need to decide by late January due to my university’s rules.

I’d only be starting my FT applications right now… I’m an international student as well, so due to my visa rules I only have between now and June to secure something in the US. New grad FT recruitment in my home country is already over, so I’d probably be unemployed for a while in my home country if I have to return. I’m also trying to break into the semiconductor industry, and I feel like it’s impossible without related internships.

However, I’m worried that internship recruitment for good roles is over too, since I don’t have offers/interviews right now. If I graduate later I’ll likely be better prepared for both FT + eventual grad school applications, but if I don’t get a good internship maybe the added benefit would be minimal?

Graduating later feels like I’m prolonging the inevitable, and graduating early feels like I’m deprioritizing my long-term goals. I really don’t know what to do…

Any advice would be greatly greatly appreciated.


r/ECE • • 15h ago

CAREER NVIDIA GPU PCIe and Boot Architect (New Grad / Intern) – Anyone have interview experience?

0 Upvotes

Hey everyone,

Has anyone here gone through the interview rounds for the NVIDIA GPU PCIe and Boot Architect role (either New College Grad or Internship)?

I've been searching around online and haven't been able to find many people sharing their experiences or what to expect for this specific team/role. If anyone has interviewed for it, or a closely related architecture/boot/interconnect team at NVIDIA, I'd really appreciate any insight into the process, topics covered, or how to best prepare.

Feel free to drop a comment or DM me directly! Thanks in advance.


r/ECE • • 1d ago

Is EE/CE good for machine learning

9 Upvotes

So I am choosing my major and I am really interested in math and machine learning however I am also interested in hardware and chips. Hence I want to keep both doors open, I imagine that if I did a math/cs major I wouldn't be able to do much in terms of hardware, but was wondering if EE or CE is still viable for a machine learning career. I am also wondering if there are specific niches/fields that combine both sides (machine learning and hardware stuff)


r/ECE • • 1d ago

Chances for ECE MS (ICs / VLSI / Digital Design)?

4 Upvotes

Hi everyone,

I know application deadlines are right around the corner, but I've been getting pretty nervous about my chances of getting into an ECE Master's program for integrated circuits and VLSI.

For some context, I am currently in my senior year of my BS in Computer Engineering. I have a 3.77 GPA, my senior capstone project involved designing a chip through to tape-out, and I have an undergraduate research fellowship focused on low-power energy harvesting. I have also tutored a couple of classes during undergrad and did a summer internship at a small startup, though the work I did there was mostly IT-related rather than chip design or VLSI. A lot of my coursework has been focused on digital design, and I have a decent SOP and LORs.

The schools I am applying to are Stanford, UT Austin, UMich, Georgia Tech, UIUC, UCSD, and UC Davis.

Am I delusional, or do I have a shot at these schools? If anyone has had similar stats, I would love to hear about your admissions outcomes from previous cycles. Or, if anyone attends any of these schools for an ECE MS, I would love to hear what your background and stats looked like when you got in!


r/ECE • • 1d ago

PROJECT Best parts to power raspberry pi pico?

2 Upvotes

Hello,

I'm currently working on a project with my raspberry pi pico 2w and was wondering what the most effective ways to power it were when not hooked up to my computer. I saw a video saying that I could use some external batteries that connected to the micro-usb port, or that I could plug in some power source into the VSUS and ground. I'm a bit lost on what the best thing to buy is. I think the projects I am going to building are relatively large and require a lot of power since I will be using a lot of servos and stuff. Could anyone link the best things to buy on amazon to power my pico please? Thank you!


r/ECE • • 1d ago

UNIVERSITY Is it normal to struggle with digital logic?

9 Upvotes

This is my first quarter of college and I was totally fine up until we got into sequential logic and flipflops, and I did really poorly on my last test. My professor sort of just gives us stuff to copy without telling us what’s happening and why, and our entire class is struggling save for a few people. I’ve seen a lot of people talking about how this is supposed to be an easy class and I’m worried that me struggling a lot with it means that this isn’t the right major for me.


r/ECE • • 1d ago

Nvidia Deep learning architecture intern interview

0 Upvotes

Hello everyone, I would appreciate any advice or hints on what to go over for this interview. I recently got the email and I guess I'm left confused on what to study. I've searched online to expect 2-3 technical rounds and resume deep dives but what skills should I specifically aim to hone down.


r/ECE • • 1d ago

Advice for a First-Year Software Engineering Student

2 Upvotes

Hi everyone!

I'm currently in my first year of Software Engineering, and I'd love to hear advice from people working in the industry, especially software engineers, recruiters, and hiring managers.

My long-term goal is to work in the US or European job market. Since I'm still early in my degree, I want to use this time wisely and build skills and experience that will help me stand out from other graduates.

A few things I'd like your input on:

- Skills: What languages, technologies, or specialisations would you recommend focusing on?

- Projects: What kind of personal projects actually make a CV stand out?

- Experience: How early should I start looking for internships, research opportunities, or other practical experience?

- Beyond university: Are certifications, open-source contributions, competitions, or anything else worth pursuing?

- Hiring: What separates an average graduate from someone you'd actually want to hire?

Also, if you could go back to your first year, what would you do differently?

I'd appreciate any advice, personal experiences, or recommendations. Thanks!


r/ECE • • 1d ago

How do I wean off of a.i?

0 Upvotes

I know a lot of electrical engineers get addicted to artificial intelligence. I think a lot of people do, how can I build the courage to wean off of a.i and only learn from the slides/resources my professor gave me. It seems really scary to do so. because looking at the slides I have no idea how to learn from them. Anyone feel this? Because yes I understand what my code does, and each line I'm really struggling to figure out how to understand these things myself.


r/ECE • • 1d ago

PROJECT Switch from Instrumentation to something else

2 Upvotes

I have a MSEE from one of the SUNY schools and have worked in petro chemical industry as an instrument engineer for over 20 years.

I am unhappy about being in support role and would like to pivot to something better. I have been eyeing semi conductors but don't know how to switch so late in the game.

Is it doable? Can i get in ? I already have a MSEE , do i need to redo it.


r/ECE • • 2d ago

Hi, I appeared for first round of interview at Lam Research for the role of QA Software Engineer 3 last week and was asked 2 basic python programming questions. I have 2 face to face interview rounds now. What questions can I expect for Python playwright automation

0 Upvotes

r/ECE • • 2d ago

Power electronics or embedded systems and ic design

1 Upvotes

I'm in my 3rd semester of electrical engineering and need to start deciding what to major in. Recently, I've developed an interest in power electronics and embedded systems+ic design. And I'm thinking I also want to study abroad, which one do you guys think would be better considering future work opportunities globally (and possibly Master programs scholarships as well)?


r/ECE • • 2d ago

Advice for EE grad looking for credible home projects (embedded/comms) while job hunting.

1 Upvotes

Hi all,

I'm an EE graduate with a couple of internships in PLC programming and embedded work, but no full-time experience yet. Due to the economic crisis in my country still couldnt find any job and it's been 2 years. That 2 years gap creates curiosity for the interviewers. Therefore, I need solid projects that can show people that I still know everything about my profession. I'm job hunting and also planning to apply to master's programs. I want to use the next few months to build two solid projects for my github and cv, ones that are real, measured and properly documented, not toy demos.

What I have: an STM32F407 Discovery, a Hantek 6022BL, a multimeter and a small parts budget.

My current ideas:

  1. An embedded digital comms testbed: FSK/BPSK modem on the STM32 using the DAC/ADC, demodulation in firmware, BER vs SNR measured and compared with theory.
  2. A digitally controlled buck converter with PID, with step response and efficiency measured and compared to a simulation. Maybe add a Modbus RTU interface so a PLC can read it.

Questions:

- Would these look credible to you as a hiring manager or admissions committee? What would make them more convincing?

- Is there something you'd build instead, or something that's overdone and gets ignored?

- When you look at a candidate's GitHub, what do you check first?

Any advice is appreciated, blunt feedback included. Thanks!


r/ECE • • 2d ago

CAREER Seeking for some advice as a ECE(electrical and communication..)student.

1 Upvotes

What skills I should focus throughout my bsc.Im south asian and i wanna do my msc in Europe(especially Germany) and settle their.Which skills will offer me plenty of career opportunities there with easy pathway.


r/ECE • • 2d ago

Will a RTX 3050 be sufficient for engineering?

1 Upvotes

Hello guys, I will be purchasing a new laptop soon, but due to budget constraints i dont think i will be able to get anything over a 3050 for now, will it be somewhat run most of say Kicad, proteus, Fusion 360 even blender or such softwares without giving me a slideshow?

Or should i wait for another year before purchasing a new laptop? currently using a macbook air 2020


r/ECE • • 2d ago

How bad is it that I might not take a power analysis class?

12 Upvotes

I don't want to be overloaded this semester so I am forgoing a power analysis class. how bad will this be for me not to have on my resume if I want to be in power industry? (I don't care so much for power but I want a job thats where they are at!)


r/ECE • • 2d ago

Do I need to buy and solder a PCB to be able to put it on my CV?

10 Upvotes

I'm very good at designing Embedded Systems PCB's and always eager to learn something new but the thing is, buying the PCB and the components and solder myself is all very time consuming and especially money consuming as I'm an international student and money is always tight. My question is can't I just link my designs to the CV while not having printed them?