r/ElectricalHelp • • 19h ago

Cooktop + oven on one circuit, 6mm² TPS, 32A main in a small cabin

Thumbnail
gallery
0 Upvotes

I'm building a small cabin in North Queensland and have an oven and cooktop to join and then out to the switchboard

Appliances:

Devanti induction cooktop, model CT-IN-C-YL-ID3501: 220-240V, 3000-3800W, double-square (Class II) symbol on the label

Sölt 60cm built-in oven, model GGSO605MS: 2.1kW. Has a wall mounted lead will need to cut.

Existing wiring

One cable from the wall to the switchboard, printed "Prysmian 450/750V V-90/3V-90, 2C x 6mm² + E 2.5mm² Cu"

Cores are red, black and green

Switchboard

The main breaker is a Hager MSN132, which I believe is a 1-pole 32A C-curve MCB. I have a second identical 32a breaker for the oven and cooktop

My rough numbers

Cooktop at full power: about 15.8A. Oven: about 8.8A. Together: about 24.6A

My plan:

Hager 32a breaker for the board (photo)

A junction box for the joins. I have 500V/40A containing 4 X screw tee connectors marked "3x6mm / 4x2.5mm".

My questions for the sparkies here:

- Are the junction box and connectors sufficient?

- Is the 32A Hager right for this circuit on 6mm² TPS, given a 3.8kW cooktop and 2.1kW oven?

- My main is also 32A. Is a cabin with a 32A main realistically able to run induction and an oven plus everything else?

- The oven and wall wiring have three cables, the cooktop just two. Is this okay to all go through the same connectors? I.e. 3 in +/- (oven, cooktop, wall wires), 2 in earth (just oven and wall wires)

- Are the tee connectors in the 40A box acceptable if they carry their own rating and compliance marking? Does mixing 6mm² and thin appliance leads in one grub screw worry you?