r/FenceBuilding • • 5h ago

Fake Home Depot fence

Thumbnail
gallery
18 Upvotes

My neighbors installed a Home Depot panel fence, it's fine and gets the job done (right side of photos). I decided to just match it for this small back yard area in my yard but of course their panel size didn't fit my area so I made my own version to match.


r/FenceBuilding • • 14h ago

Barb wire? How old would you guess?

Thumbnail
gallery
17 Upvotes

r/FenceBuilding • • 20h ago Bravo

Cedar Fence

Post image
6 Upvotes

Looking for guidance on building a simple 6' cedar picket privacy fence. My sister recently bought a house with a small yard. One of the things that needs done is the wire fence torn down and a cedar privacy fence put up (300' roughly)

Ive only ever built rolled wire panel fences, meaning the only applicable knowledge I have is digging holes and setting posts. When I looked into cedar privacy fences, I was pretty quickly overwhelmed with the sheer amount of options and choices that make building one vastly different from building another.

My sister just wants a simple privacy fence. From what I have found, this entails posts set every 8' with low/mid/high rails between and attaching pickets to rail. I see 5x5 posts are also recommended, however the only local option here is Lowes or HD, which means 4x4 or 6x6 (which seems like overkill).

Ive drafted out a rough lumber supply list that constitutes (45) 4x4x8 for posts, (120) 2x4x8 for rail and (600) cedar 5/8x5-1/2x 6' dog-ear pickets. Obviously there will also be screws and concrete ordered and I've gotta figure out a plan for a gate, but is there anything obvious I'm not accounting for? Is there any tips to ensure the fence is built as well as possible for being a budget-friendly privacy fence?

*Also, yes I know I accounted for each corner post twice when counting on my sketch, this was deliberate so I'd remember to order atleast a few extra posts in case some are severely warped.

I appreciate the help, just don't want to screw up the job in the effort of helping out a family member!


r/FenceBuilding • • 6h ago

One way outdoor dog gate

5 Upvotes

Does anyone have any idea how I could install an outdoor one way dog gate. We have a fence around our garden but walk our dogs outside of the garden fence on our property. Some of the more energetic dogs roam around the property after the walk. It’s not a problem for us but I would like to install a flap/gate/fence that these last stragglers could use independently to enter the main garden. I have seen a wooden one at this link https://www.instagram.com/reel/Df2S85-uHut/?cnvx=MTdsNGdqbjU3aWQ3dQ== but I think it will be too heavy. Any ideas. Also before the criticism comes, we have 9 Thai street dogs that we rescued from abominable circumstances and my husband and I flew to France when we left Thailand. They are not neglected if they hang out in the field on our property


r/FenceBuilding • • 22h ago

Is this a fair price?

3 Upvotes

I’m getting estimates for a 6ft tall privacy fence, 165 linear ft, pressure-treated pine, with two 4ft-wide gates. The most recent proposal came in at $8,100 including tear down and removal of my old wood privacy fence. Is this a fair price?


r/FenceBuilding • • 18h ago

Snow Fence Help

Thumbnail gallery
2 Upvotes

r/FenceBuilding • • 1h ago

Did my fence contractor mess up or do it right l?

Thumbnail
gallery
1 Upvotes

This question might be obvious, I’m not sure as I have very little knowledge about construction and just hire licensed people to help me. So, thank you in advance.

I needed a fence gate post replaced, and it sits very close to the house.

When they took out the old post to put in a new one, they cut into this concrete shown in the picture. Is this the house foundation footing that they cut into, or is it just extra concrete bonded to the house foundation from the original fence post installation?

And, the second picture is after the new post installation. Is it okay for the cement to be poured directly agasint the house foundation? I ask because it seems there is a small gap between the sidewalk concrete slabs and the house foundation , but here it is not.

Thank you.


r/FenceBuilding • • 13h ago

Hot-dip galvanized 3D V-bend perimeter fence — coating, panel stiffness, climbing resistance (manufacturer, happy to answer spec questions)

1 Upvotes

The panels are hot-dip galvanized, so the zinc covers the wires, the welds and the post edges rather than sitting on top like a paint layer. The V-bend ribs give the panel stiffness, the mesh opening is tight enough to make climbing awkward and to keep livestock in, and the welded joints are the load path under impact. Panels and posts ship ready to assemble. If anyone is comparing coating types or mesh specs for a site, ask away.