r/FiestaST • • Dec 14 '24

Stickied Thread: Cars for sale

41 Upvotes

Please use this thread to post your cars for sale. This will cut down on the individual threads that might pop up. Thanks everyone!

Please include mods, price, and location in each post.


r/FiestaST • • 15h ago

PSA: Clutch Master Cylinder Replacement & The All-Mighty O-Ring

Thumbnail
gallery
37 Upvotes

I did my clutch master cylinder replacement yesterday with my dad. He's veeeeeery mechanically minded and has about a billion and one socket sets, wrenches, extensions, etc needed to work on cars, and there's also the fact my parents house has a big heated garage 😄(it was -5 C yesterday 🥶 ). As I was working on unbolting the clutch pedal from the driver's footwell, he was pulling the tubes from the back of the master cylinder after we had both scraped knuckles and swore multiple times trying to take apart the right side of the engine bay.

I really should have been watching, because the O-ring (more of an actual o-tip) fell off the tube as he was manipulating the tube away from the back of the master cylinder. After changing out the cylinder, we reassembled half of everything and started a reverse bleed... and the fluid level was not rising... until we shone a light at the back of the clutch master cylinder and the entire firewall was just covered in brake fluid.

Queue one very heartfelt and loud "AWWW SHIT!" from me. So, we pulled the battery and battery tray back out. Got my head down in the engine bay, and saw the o-tip sitting on top of the exhaust. Gently tapped it onto the floor, grabbed it, and then pulled the lower tube out again, put the tip on, reseated it, then went through about 20 shop towels soaking up as much DOT4 fluid as we could.

So, the PSA is: When replacing your clutch master cylinder and having someone assisting you, make sure everyone involved is aware of that tiny o-tip and to KEEP TRACK OF IT!!!

Thankfully I had thought to buy another jug of DOT4 before we started, as we had to dip into that to do the reverse bleed after reseating the tube with the o-tip on. My lil FiST shifts and clutches smooth as melted butter now, like it did when it was new. 👍

Pictures mildly related, just the day I picked her up at the Ford Dealership, because she's clutching and shifting like new again, 9.5 years later 🥰


r/FiestaST • • 19h ago

Scammer alert

19 Upvotes

Hey guys,

A few days ago u/grimreaper7810 posted on here supposedly selling some parts. I just wanna make sure nobody sends him any money. I offered to buy a couple things from him and he conveniently went into the hospital and is unable to provide the parts. Of course, the money is spent as well.

Just a heads up to everyone.


r/FiestaST • • 6h ago

Is this rattling typical for the 2016 ST?

1 Upvotes

Looking to get this ST but I’m not familiar with them. I’ve got 2 concerns after checking it out

  1. All the rattling
  2. The thing seemed to crank weird when starting for maybe half a second.
    It was already warmed up, has a new battery and recently got the timing belt done. I’m hoping it’s just eco boost quirks.

r/FiestaST • • 19h ago

New day, new parts, new squeeks

Thumbnail
gallery
5 Upvotes

I just threw a bunch of parts (intercooler, downpipe, exhaust, springs, shocks & struts, new crossover pipe, new pads, new plugs) and a Dizzy stage 2 tune at my 2016 FiST. Everything is running well except for one exception. It sounds like a squeaking mouse coming from what seems to be the passenger side rear.

Any ideas? Obviously something is rubbing on either my Swift springs or Bilstien b8s. I did replace the bump stops and the spring pads.


r/FiestaST • • 17h ago

MK7 What is your solution for bad roads?

3 Upvotes

I bought a mk7 with stock 17in wheels with 205/40 tires. But the road conditions are not ideal where I live. I am thinking of putting 45 tires on it. Do you think they'd rub on a 17? Or should I just go for 16in wheels instead?


r/FiestaST • • 21h ago

MK7 Just a morning laugh 😅

Post image
7 Upvotes

Bit of an icy morning - get to work with my latte and need to grab my laptop bag from the back seat. Roof is too slick to set the cup on it - oh what to do?! Delta SR Spoiler riser offers a convenient - no tip - solution!


r/FiestaST • • 1d ago

Shoutout to the engineer who did this mini can holder.

Post image
168 Upvotes

r/FiestaST • • 19h ago

MK7 Ebay Parts ⭐️⭐️

3 Upvotes

⭐️- I’d like to use this thread as an opportunity for us to help the community out.
🚨Disclaimer: this is not intended to take financial support away from the reputable brands we know and trust, just an option list for those who have a budget.

If you have bought any upgrade, performance, aftermarket parts for your FIST from eBay and they actually worked with little to no modification, I’d love for you to list them out here. Links and longevity of use are a plus. Personal thoughts surrounding them are also welcome.

Thx


r/FiestaST • • 20h ago

Question about seats

2 Upvotes

Would the focus RS driver seat bolt into a 2016 fiesta?


r/FiestaST • • 23h ago

Bluetooth problems

2 Upvotes

I have been using my fiesta for about 1.5 months. Originally the Bluetooth was fine and never had a problem with it. All of a sudden it constantly disconnects, my phone says it is connected but the car just constantly connects and then disconnects. I have tried resetting the sync in sync settings but It hasn't rectified it. If anyone has had this problem and overcome it I would be greatly appreciative of your advice on how to rectify this issue.

Thanks!!


r/FiestaST • • 20h ago

MK7 Is this an OEM turbo?

Post image
1 Upvotes

I recently bought a turbo smart diverter valve block off plate and bov for my 2016 FIST. When I got to installing the block of plate I realised that the bolt spacing on the plate is asymmetrical, while the surface where the plate bolts to is has a symmetrical bolt layout. Do some FIST's come with a symmetrical tri bolt layout for the diverter valve? The turbo is still in the car and there isn't much visibility, but I've found this code on the turbo: 5443 1015190.

Im thinking of taking off the black pipe that is attached to the front of the turbo by the turbine to see if I can find and stickers or other codes.


r/FiestaST • • 1d ago

More track prep

Post image
13 Upvotes

Front end alignment today -2.5 degrees of camber with a touch of toe out, and i installed the trackspec hood vents.
Lime rock park on Friday


r/FiestaST • • 1d ago

MK7 2014 FIST knock on wood no issues yet

Post image
46 Upvotes

r/FiestaST • • 1d ago

MK7 Direnza short shifter?

Post image
1 Upvotes

Anyone have experience with Direnza, specifically their short shifter? Can get it on sale for £19.99 instead of £35.

They seem to have a decent following on social media but I haven’t seen them mentioned in this sub


r/FiestaST • • 2d ago

MK7 Do you prefer 16” or 17” wheels on ST

Post image
16 Upvotes

My winter tires are 16” and I kinda like it🤔


r/FiestaST • • 2d ago

MK7 ST200 - Sale/Swap

Post image
10 Upvotes

I'm looking to track an ST, but feels wrong to strip out an ST200. It's CAT N, stolen recovered undamaged and just ticked over 80k because my girlfriend has been using as a daily for a few years now. Not in a rush to sell, just wondering if anyone would be interested in one to buy or include a current MK7 as part of a part ex.


r/FiestaST • • 1d ago

MK7 Maxton Design Focus RS Style front bumper.

1 Upvotes

I had a little oops and my original front bumper got damaged pretty badly. I am looking at fixing it but if that’s not possible I will need to swap it out.

Now, original ST bumpers in molten orange aren’t exactly a frequent used part and getting an unpainted oem will be almost twice as expensive as the Fiber glass maxton one.

So, Has anyone tried it? Was it any good? How’s the general fitment?


r/FiestaST • • 1d ago

Ford Fiesta 2018 - 1.1 (52 kw)

Thumbnail reddit.com
1 Upvotes

Hi everyone,

I own a 2018 Ford Fiesta 1.1L petrol (52 kW / 70 hp, naturally aspirated), which I understand is equipped with a wet timing belt.

The car is approaching 8 years old and currently has around 76,000 km on the clock. Considering its age and mileage, would you recommend replacing the timing belt as a preventive measure, or should I wait until the manufacturer's recommended replacement interval?

My driving is approximately 70% city and 30% highway. I also change the engine oil every 10,000 km and use only the Ford-recommended Castrol oil.

For those who own or have experience with this engine:

- At what age or mileage did you replace your wet belt?

- Have you experienced any issues with belt degradation?

- Would you recommend replacing it now, or is it still safe to wait?

Any advice or personal experience would be greatly appreciated!

Thanks in advance!


r/FiestaST • • 1d ago

Anyone running the Gates 34844 180* thermostat?

1 Upvotes

Doing a TB this weekend and the motocraft 180* thermostat is $90+ by itself.

The Gates 34844 has a 180* thermostat and housing for ~$50.


r/FiestaST • • 2d ago

Spark Plugs after 10 years/83,000 miles

Post image
30 Upvotes

Now before you say anything, yes I know that was very dumb of me. This is just a PSA to all new owners, get these things done every 30k. They were incredibly easy to swap out, so yeah, don’t be like me. Ignore the dealer and manual, there is no such thing as a 100k spark plug.


r/FiestaST • • 1d ago

Ford fiesta st

Thumbnail reddit.com
0 Upvotes

r/FiestaST • • 2d ago

Low rpm/idle misfire

Thumbnail
gallery
18 Upvotes

2017 Fiesta ST Looking for insight no misfire related codes
Low rpm/idle misfire hits full boost feels fine power wise just feels weird around 1200-3000 rpm not noticeable after (might not be able to hear in higher rpm)
I did a bore scope cyl 2-4 look okay some pitting and cylinder score wear cyl 1 looked pretty rough.
Compression test 1-160~ 2-160~ 3-160 4-148~
Hooked up to my teachers fancy scanner and cyl 4 was only cyl counting misfires (odd considering it’s the best looking one)
Do I start shopping for an engine now or keep diagnosing?
New plugs/coils . Replaced evap purge valve that’s been bugging me for a while still have a p0455 p0456 . I have a new injectors otw. But any insight or additional information is appreciated or if anyone’s had similar issues If not injector related I assume leak down test and go from there. A few Borescope and and comp test pics included in slides


r/FiestaST • • 1d ago

MK7 Milltek exhaust mounts/hangers help

1 Upvotes

Iv got a mk7 ST and have just fitted a milltek non res race catback exhaust and the exhaust is slightly knocking, can anyone tell me which mounts would stop the knocking? Many thanks!