I did my clutch master cylinder replacement yesterday with my dad. He's veeeeeery mechanically minded and has about a billion and one socket sets, wrenches, extensions, etc needed to work on cars, and there's also the fact my parents house has a big heated garage 😄(it was -5 C yesterday 🥶 ). As I was working on unbolting the clutch pedal from the driver's footwell, he was pulling the tubes from the back of the master cylinder after we had both scraped knuckles and swore multiple times trying to take apart the right side of the engine bay.
I really should have been watching, because the O-ring (more of an actual o-tip) fell off the tube as he was manipulating the tube away from the back of the master cylinder. After changing out the cylinder, we reassembled half of everything and started a reverse bleed... and the fluid level was not rising... until we shone a light at the back of the clutch master cylinder and the entire firewall was just covered in brake fluid.
Queue one very heartfelt and loud "AWWW SHIT!" from me. So, we pulled the battery and battery tray back out. Got my head down in the engine bay, and saw the o-tip sitting on top of the exhaust. Gently tapped it onto the floor, grabbed it, and then pulled the lower tube out again, put the tip on, reseated it, then went through about 20 shop towels soaking up as much DOT4 fluid as we could.
So, the PSA is: When replacing your clutch master cylinder and having someone assisting you, make sure everyone involved is aware of that tiny o-tip and to KEEP TRACK OF IT!!!
Thankfully I had thought to buy another jug of DOT4 before we started, as we had to dip into that to do the reverse bleed after reseating the tube with the o-tip on. My lil FiST shifts and clutches smooth as melted butter now, like it did when it was new. 👍
Pictures mildly related, just the day I picked her up at the Ford Dealership, because she's clutching and shifting like new again, 9.5 years later 🥰