r/FixMyPrint • u/teeto66 • 8h ago
r/FixMyPrint • u/Outrageous_Grade5692 • 2h ago
3D model Just finished printing the Burj Khalifa! Turned out surprisingly clean on the spire.
r/FixMyPrint • u/chupa2019 • 21h ago
Resin Does anyone know what causes this cut or line in my resin prints?
r/FixMyPrint • u/Savings_Ad_800 • 19h ago
Discussion [Survey] How do you store and track your filament? (3 min, anonymous, high school project)
Hi r/FixMyPrint, I'm a high school student working on an engineering design project about filament storage in school and shared 3D printing labs. I'm trying to find out how people actually store spools, keep track of how much is left, and deal with damp filament or spools running out mid-print.
The survey takes about 3 minutes. It's anonymous and doesn't collect names or emails.
If you have a story about a print ruined by a run-out or wet filament, I'd love to hear it in the last question. Thanks, and I'm happy to share the results here once I've put them together.
r/FixMyPrint • u/AdInside8283 • 9h ago
Fix My Print Help my infill ruin my wall.
Problem i have is that I can see infill through my wall I'm using cura. Any setting to help this issue.
r/FixMyPrint • u/NerdMachine • 10h ago
Fix My Print I can't seem to get a good first layer with Bambu PETG HF


Ender 3 v2
Bambu Labs PETG HF
Using the stock plate with glue stick
Nozzle: 0.4mm, line width 0.6mm
Bed temp: 70C
Nozzle temp: 250C
Fan: 0%
I tried playing with the nozzle height with limited success. I'm wondering if this PETG is an exception to the "no fan for petg" rule, but this print is a functional part so I wanted to leave it at 0% for strength.
I dehydrated the brand new spool at 55C for 12 hours before printing.
r/FixMyPrint • u/Arpegio22 • 14h ago
Fix My Print Posting again to ask what the problem is for top layer
For some reason the top layer would end up looking like this no matter what pattern I take when there is regularly spaced holes between them, but when there are none the top surface looks alright, this happened after I tried to fix the gap on first layer for concentric pattern that I had a problem by increasing the first layer width.
Printer: Ender 3 V3 SE
Slicer: creality print
Filament: PLA
Nozzle Temp and Bed : 205 and 50
r/FixMyPrint • u/SeduceUs • 18h ago
Fix My Print What is happening here?
Very short time-lapse, but if you click through it starts off fine, but then as soon as it starts to print the top of the container it goes all wonky. My only guess is over extrusion, but the bottom starts off just fine. The first layer came out pretty decent and should have the same settings. This is the second time it happened, after the first I noticed some warping so I dialed in the heat settings on the build plate and added the brim which fixed the issue. This time there was no warping. I'm pretty stumped. I'm trying to print the rugged stacker box for gridfinity.
I am printing on a Snapmaker U1, using Sunlu High Speed Matte PLA and used Snapmaker Orca as the slicer. Nozzle temp is 220, first layer bed heat is 45 then after that it drops down to 36. Print speed is set at 450.
r/FixMyPrint • u/Additional_Ad_5032 • 19h ago
Troubleshooting Diagonal line artifacts
I tried printing this at a 0.08 mm layer height on my Elegoo Centauri Carbon with a 0.4 mm nozzle; everything was default for the 0.12 mm preset, and I only changed the supports to tree/strong and manually set the layer height to 0.08 mm. I tried changing the print order to inner/outer/inner and slowed the outer wall print speed to 60 mm/s from the previous 160 mm/s. The results were better but not as they should be, and I had other issues crop up.
Any pointers or suggestions would be appreciated.
r/FixMyPrint • u/backtothe88 • 20h ago
Fix My Print Why did this happen
I washed my build plate yesterday
r/FixMyPrint • u/Druzuluz • 21h ago
Fix My Print What could be the cause of this?
These underextrusions at certain spots create points where the print easily snaps, making it basically unusable. I'm using an Elegoo CC1 with SUNLU PLA Wood at 220°C.
I assume it has something to do with the filament, as I haven't used it in a longer time and I've never had this problem before that. I've already dried the filament for 12 hours after my first failed print but that didn't seem to help much. The base looks very good and even the ironing is basically perfect, but from a certain layer onwards the problem just keeps going.
Is there any setting I can try to adjust to fix this?
r/FixMyPrint • u/edot4130 • 9h ago
Fix My Print Help with Hyper Petg
Helping my son print a clone trooper helmet and we are having some trouble getting a good result. We did an initial temp, flow rate, and pressure advance calibration to come up with the settings below. Made a go of the first print and it wound up failing a while in (lost some supports) so figured we would take this as an opportunity to dial in the settings a bit more and hopefully produce a better result. Still kind of new to this and especially the hyper petg, any advice would be greatly appreciated. For some context the first two photos are of the outside rim of the helmet and the second two are of the face slit front/back. I am a bit stumped because it seems to be both under extruding (leaving voids) and then over extruding (leaving blobs) at the same time. Any suggestions on how to improve the result would be greatly appreciated!
Creality K2 Plus - .4 nozzle
Creality hyper Petg
Flow ratio .98
Nozzle Temp 235
Bed temp 70
Retraction speed 40
Print speeds- see last photo
Pressure advance .05
37% RH in CFS
r/FixMyPrint • u/steve_simpson • 2h ago
Troubleshooting Wavy extrusion on MK4S
galleryI’ve been trying to troubleshoot this wavy extrusion on my Mk4s for weeks and I’m losing my mind. Has anyone here run into this issue? I’ve rebuilt the nextruder, swapped out the thermistor and heater, changed the loveboard, replaced the main cable, belts, idlers, etc. any advice is appreciated.
Printer is a prusa mk4s with firmware 8.0.0, prusaslicer 3 and 2.9.7, and elegoo PETG on 0.2mm structural. Printer temp is 235 for first layer and 250 after, with 85c bed.
r/FixMyPrint • u/AdLeading6357 • 2h ago
Fix My Print PETG, any idea what causes this?
galleryr/FixMyPrint • u/heir-of-slytherin • 4h ago
Fix My Print Help with PLA+ ironing settings on P1S
Printing this Christmas wreath for my wife on my Bambu P1S with AMS. I thought I had the ironing settings down after doing a test print, but this is the final result. The ironing turned out super smooth on the red and lighter green parts, but the dark green top layer is very rough.
The filaments are slightly different. Dark green is Inland brand PLA+. Red is Insignia PLA+ and green is Insignia PLA.
The setting I used were:
Ironing type: Too surfaces
Ironing pattern: rectilinear
Ironing speed: 35 mm/s
Ironing flow: 20% (saw small gaps with 10% in my test)
From my research, it may have more to do with the top layer quality rather than the ironing, but I don’t know why the red and green ironed so well while the dark green didn’t with the same top layer settings.
r/FixMyPrint • u/baconeggchz • 5h ago
Discussion What causes this web like stuff on my prints?
Model is a P2S. I have an a1 mini and this doesn’t occur on this with same Elegoo filament PLA+. It’s not the end of the world and I can easily take it off but rather ask what it causes this.
r/FixMyPrint • u/ReiCaolho • 9h ago
Fix My Print Help with print with low quality details
galleryr/FixMyPrint • u/SillyArmadillo3176 • 37m ago
Troubleshooting 300mm ASA is acting up
For short, i designed a part i want to print, no issues in pla but ofc ASA is acting up and the corners/edges are either lifting or getting bubble like artifacts.
My setup is:
Creality CR10 Pro V2 with a housing made from plexiglass,
I let the whole thing preheat for about 30 minutes
My bed temps where all between 110-90 and print temps of 270-255
I use the Orcaslicer
I can print a benchy fine but larger flat things seems to be a big problem.
Ive heared you should have a heated chamber but i couldnt find a afordable printer with a bedsize of 300x300.
Any help is appreciated!!!