r/HomeNetworking • • 23h ago

Unsolved Just got fiber and not sure how to connect

Post image
24 Upvotes

Hello, need help connecting to desktop while maintaining low latency for games. Ethernet is a no go according to gf. Help


r/HomeNetworking • • 19h ago

Advice To connect my CCTV setup to wifi in the house would I need a router? Or something else?

Post image
0 Upvotes

Sketch to show the setup.
Internet port and wifi modem are on end of the house. CCTV with cabling are to another room.
Seeking to wifi connect the CCTV box to the modem.
Thanks for any help!


r/HomeNetworking • • 7h ago

Advice 10 seconds to connect to wired router!

0 Upvotes

Helping a friend in his house. He’s got a router, and a battleworn cat 6 cable down to the cellar. when I connect my laptop it takes about 10 s before the port lights up. While I advise to change the cable, I’m still wondering.

What causes such a long delay?

I’m used to 0,5 seconds to get a connection over Ethernet.


r/HomeNetworking • • 20h ago

Advice Can I solder these instead of running new cat5 cables?

Thumbnail
gallery
52 Upvotes

My wife and I just got a home. I've always dealt with mesh networks while renting, but wanted a hard wire port in our gaming room.

The fiber modem is a few rooms away, but there was previously AT&T u-verse hooked up. It looks like the original connects used cat5e keystones, but just two wires.

I tried to rewire the keystones for cat5e, so I can get a hard wire for the PCs, but I'm now seeing they terminate in this junction box outside. Can I just solder them or use solder seal wire connectors and call it a day, instead of trying to run new wires through the attic?


r/HomeNetworking • • 11h ago

How to connect a router to JioFiber - Wireline and get a IPv6 address

0 Upvotes

I have a wired Jio Fiber connection. My house has two floors. On the ground floor I can connect using a Ethernet hub and Wifi network. But on the top floor I cannot connect to the JioFiber router, due to attenuation and range. I have installed a Wired Ethernet 100 Mbps cable to the top floor, connected to JioFiber router. Using this cable I would like to configure my own personal Router and use it on top floor. Ground floor devices, like TV STB, Mobile devices, etc will connect to JioFiber router. The top floor devices, like Gaming Console, Laptops and Mobile devices will connect to my personal WiFi router.

I am not interested in setting up my personal router as a bridge or as a AP Client, connected to Jio Router.

The issue is that on my personal router on top floor I get a IPv4 address assigned from JioFiber router. But my personal router fails when it tries to get a IPv6 address from JioFiber router. So devices that I connect to my router are unable to get onto internet. Especially apple and Android devices. Windows devices I can configure to use only IPv4 and network works just fine. But for any Apple devices and Android devices internet does not work.

So how do I get a IPv6 address for my personal router from JioFiber Router? Or do I have to configure the routing table on my personal router to route all IPv6 requests to IPv4?


r/HomeNetworking • • 15h ago

Safely powering network with UPS and PoE

0 Upvotes

Hello everyone. I'm in the process of upgrading my home network. I think I've read a few too many articles and forum threads and overloaded myself with information. I'm a bit confused on a couple of things. Specifically regarding powering devices on the network.

UPS and Power Boards

I've got a CyberPower VP700 UPS powering my NAS. I want to power my router, WAP, and two switches off that UPS as well, so that I still have a basic network for a bit in a power outage. Problem is that the UPS only has two unused outlets remaining. I've read in some places that you should never use a power boards with a UPS, and in other places that power boards can be fine as long as they're not surge protected (and you don't exceed the UPS power limits). I consulted the UPS user manual but it didn't mention power boards at all. It did, mention "Avoid using extension cords.", but didn't specify wether that meant extension cords going into the UPS, or the UPS going into an extension cord.

  1. Would a power board fall under the umbrella of "Extension Cord"?
  2. If the first answer is no, what power features should I look for or avoid to be safe? I understand that a surge protected board is probably a no go (although I don't fully understand why). Would overload protection be okay?
  3. If power boards are a flat no, would plugging in a USB charging hub (something like this) be okay to power the devices that accept USB-C inputs?

PoE and Patch Cables

I read that PoE works best with solid-core cables. In my network, all cables coming out of devices that can provide PoE will be typical stranded patch cables. Does this meaningfully change the capabilities or safety of using PoE? If I understand correctly, the stranded cables have higher resistance, and therefore produce more heat than a solid-core cable. Is this difference likely to be at all significant in situations where a patch cable would typically be used? And if so, what do I need to consider and what specs on the cable should I look for (besides absolutely not being CCA)?

While we're on the topic of cables, does brand matter much in the quality of the cable? I've seen Cable Matters and Monoprice mentioned a few times, but I'm also seeing some sales on some other brands like Tecmojo. Are there any brands to avoid or gravitate towards or does it not really matter?

I really appreciate any insight anyone can provide! I'm a bit paranoid when it comes to power so I just want to make sure I understand the what and why.


r/HomeNetworking • • 18h ago

Planning For Fiber

0 Upvotes

I few months back I ran Cat6 Ethernet throughout my home, and set up an Omada home network set up as follows:

Hinton Coda 56 modem -> Fusion 2.5G router -> SG2428p switch

The switch then connects to a dozen or so Ethernet cables running throughout the house, as well as to two EAP653 access ports, and a DS108g switch for various gaming consoles to connect through.

Yesterday I was informed that Ziply fiber will be installed in my neighborhood soon (exact date unknown, but we’re “next”). Could not be more ecstatic to finally get Xfinity out of my life. Exact plans and rates aren’t known yet, but it seems like they offer up to 50Gbps speeds (?!?). I’d be happy with gigabit, but may go for 2Gbps if I’m feeling saucy.

My usage is primarily gaming and streaming, but in the next few months I have plans to set up a NAS for media storage and for direct streaming within the house, and possibly to a single user (me) at a time remotely.

My three primary questions, as a novice who learned everything he knows while setting up this new network, are:

  1. I’ve heard that fiber doesn’t require a modem, and that it connects to your router directly through an Ethernet cable. I want to confirm this is true, and that that means I can remove the coda 56 modem and just use an appropriate length cat6 cable to connect directly to my router.
  2. Should I expect the fiber box they install to be at a random location that is dictated by what works best for the fiber company? Or do I have some say in the location, or would it likely be near where the single coax cable installed in my house currently is? Just want to mentally prepare if I need to plan another cat6 cable run to connect it to my current setup, or if it’ll likely just be in that same spot.
  3. My current switches were chosen with gigabit speeds in mind. I’m trying to work out whether there’s really a reason to upgrade to 10Gbps switches even if I do go for higher-than-gigabit internet speeds once fiber is here. My current use cases (gaming and streaming) are likely unaffected by higher than gigabit, aside from downloading a new game in less time. For the NAS I have planned, I would be placing that in the same nook as the router and primary switch, and would be the only thing I can imagine individually wanting more than a gigabit at certain times. Since my main switch is limited to gigabit in each port, can the NAS be connected directly to the router without causing any issues I’m not thinking of? I’m fine if my home devices have gigabit access to stream files from the NAS, as long as the NAS can theoretically access 10Gbps down/up speeds for itself if I spring for higher speeds in the future.

r/HomeNetworking • • 3h ago

Advice Would you pay 80 SEK extra for 500/500 over 100/100?

0 Upvotes

A friend and I disagree about my broadband renewal. Both options have a 12 month contract, but 500/500 costs 80 SEK more per month. I think 100/100 is enough for streaming, browsing and occasional gaming, especially since I can leave big downloads running overnight. He thinks faster downloads are worth the difference even if I only notice it a few times a month.

For anyone who's gone from one to the other, did you miss the extra speed beyond downloading games?


r/HomeNetworking • • 15h ago

Mesh/Router for non tech parent

3 Upvotes

My mom’s ISP tech came out and told her she’s not getting full coverage because her old “Nighthawk” router is outdated and needs to be replaced. I don’t have the exact model number. She’s now convinced we need to swap it out.

House details:
• Single-story ranch, ~2500 sq ft
• ISP drops at the front of the house
• Most of the living / activity happens on the opposite (back) end
• Very light device load: 2 smart TVs, Sonos, 1 iPhone, 1 iPad, 1 Apple Watch

I’m looking for a reliable, simple mesh system that a non-technical person can live with (easy setup + low maintenance). Wired backhaul isn’t really an option right now.

What would you recommend in this situation? Prefer something that just works without constant tinkering. Budget is flexible for something solid, but I’m not looking to overkill it for this light usage.


r/HomeNetworking • • 13h ago

Trying to get a eap to work wirelessly

Thumbnail reddit.com
0 Upvotes

r/HomeNetworking • • 20h ago

high ping on new router

0 Upvotes

got a new router recently (TP-Link Aginet BE211
) and for some reason ive been getting 200-260 ping on gmod (i play on australian servers) now on my old router i average around 90-110 which is a really weird considering this a NEW router afterall


r/HomeNetworking • • 4h ago

Advice Incoming broadband coax adapted to satellite dish antenna cable?

Post image
0 Upvotes

I have kind of a strange question. I have an incoming coax connection in my living room for my broadband. I would like to re-locate my router modem to another room. My plan is to buy the adaptors in the picture I’ve attached to convert the coax to satellite antenna port so i can plug the incoming coax into the pre existing sockets in the wall then do the reverse in the room i would like the router to be in.
Any issues i can expect with this or will it just work?


r/HomeNetworking • • 4h ago

Is 300 mbps enough?

11 Upvotes

Unfortunately, xfinity is literally the only option in our apartment complex so we will be going with them. There is two of us so there would be two phones a MacBook Pro, MacBook Air a Mac studio an iPad possibly a PS5 and two TVs. Would 300mbps be enough for all these devices? Or what 500 would be better? We are new to buying Internet.


r/HomeNetworking • • 16h ago

Setting up voIP landline

Thumbnail
gallery
11 Upvotes

I know this post is opposite from the norm, in that I am using Cat5E cable to setup a new phone line. Looking to have a landline in the house for the kids to use in emergency. Purchased a voIP from Ooma, and have confirmed the phone works when the phone is connected directly the voIP. I’m aiming to hang the voIP box on my networking board and run CAT cable to the wall plate. When doing this I don’t get a ring dial tone. I’m testing this with a dummy 1 foot section of cable (see first photo) and still no luck. What am I doing wrong here?


r/HomeNetworking • • 32m ago

Advice Will this improve my WiFi Range?

0 Upvotes

I have the standard EE Smart Hub 6, but have been looking to see if getting a GL.iNet Flint 2 would see better WiFi performance, specifically for range.

I know there would be other, better solutions, but I have reasons I can only have a 1 router setup, and this seems the best router in my budget. I just don't want to buy it if there will be basically no change.


r/HomeNetworking • • 34m ago

Advice Black Friday Buying Advice: Eero Pro 7 or TP Link BE13000(Costco)

1 Upvotes

Hello,

Looking for advice on the following mesh systems for a 3200sq Ft, two story home. Goal is ability to do cloud gaming/remote play with little latency and to have a bit of range for the back patio. Wired connection is 5GBps but could move to 8GBps at a later date.

Looking at the Eero 7 Pro (3 pack) from Amazon for $599

https://a.co/d/00fhPUYj

Or the TP Link BE13000 3-pack from Costco for $349

https://www.costco.com/.product.4201003302.html

The Eero seems a bit simpler to setup and has a few more premium features I may not use like Matter. Really speed, range, and latency are biggest priorities. The Eero 7 Pro seems like the better system, but not sure if it’s worth a $250 price delta. Any advice you have would be awesome. Thank you!


r/HomeNetworking • • 5h ago

Advice Small smart UPS

1 Upvotes

I have several small battery backup units (like APC BE600) scattered arond the house. For instance, there's one behind the TV cabinet and one out in the shed, etc. These aren't so much there for extended outages, but rather for the frequent momentary power blips we seem to get here. They keep everything running for a few seconds until the power comes back. They all work well, but they have the same problem. When the battery cells get old and need to be replaced, the alarm goes off and it can't be muted. There is also no way to tell if the battery is getting close to needing replacement. So I'd like to find a small battery backup that works with some sort of app so I can monitor battery health. Something that sends me a notice that the battery is under 20% or whatever would be perfect. I know there are larger units that will do this, but I'm hoping to keep using small units that fit in the currently available spaces.

Anyone know of a smart battery backup that is small in size?


r/HomeNetworking • • 18h ago

Unsolved Verizon 5g internet not loading certain pages and connecting to certain devices

Thumbnail reddit.com
0 Upvotes

r/HomeNetworking • • 1h ago

Advice PS5 Downloading a Game or Firmware stops all other network traffic

0 Upvotes

This has been happening since September and I have yet to figure out what's going on. I'm hoping the internet can help....

I have an ASUS RT-AX86U Router (the non-Pro version), and ever since Sept I've noticed that whenever my PS5 downloads a game or firmware update, all the other devices on my network slow to a crawl, to the point of being unusable until the download finishes or I pause it.

I've logged into the router admin page to look at the traffic and the PS5 when downloading is only pulling average of 50-60 Mbps on a wired gigabit connection from my ISP, AT&T. I've tried tweaking QOS settings and limiting the download bandwidth but that has no effect.

With speedtest.net on my home PC on a wired connection, my speeds are averaging 900 down 800 up 2ms ping when the PS5 isn't downloading. When it is downloading, and try to run the same test, I get a latency error and the tests fails. Attempting to go to any website results in a "timeout" message in my browser. I have multiple Apple TVs, none of them can stream a video with the PS5 downloading.

I've tried multiple factory resets of both the router and the PS5, I've tried multiple versions of ASUS' router firmware. I've even tried custom firmware from ASUSWRT-Merlin. I've test my PS5 on both ethernet and wi-fi, same result.

Now I'm to the point where I'm about to ditch this router and buy a new one. But before I do that, is there anything I'm not thinking of that I haven't tried yet?


r/HomeNetworking • • 22h ago

I wonder what’s happening….

Post image
2 Upvotes

As of about 2am UTC the connect time for a load of websites I monitor, as part of my own monitoring of my internet connection, went through the roof…


r/HomeNetworking • • 19h ago

Advice WiFi issues

0 Upvotes

Recently I just a bought a pc (rtx 5060ti ryzen 7 blah blah) and ever since then yh its been good but the problem is my brother lags on his ps5 whenever I turn it on, iv tried lowering my ghz to 2.4 while he’s on 5ghz but it still doesn’t work, ive even rearrange the room so he’s closer and whats funny is hes getting around 80-90% signal strength yet he lags im pretty sure its packet loss or jitters but whenever I turn it on he lags

I was looking over ways to boost his performance but I’m not sure what to do

Any tips or things I should buy I’m all ears ??


r/HomeNetworking • • 11h ago

OK Wow I did not know Wifi 7 was truly capable of these speeds..

Thumbnail gallery
95 Upvotes

Any legends out there clocking in higher over Wifi?


r/HomeNetworking • • 4h ago

Slow network due to firewall or sm.. dk tbh

Post image
0 Upvotes

I don't even know what to say... Seeing that guy having WiFi 7 pisses me off tbh 😒 (jk)..

Can someone help tho? School WiFi didn't work for sm reason, and i thought i could try and figure it out, so i tinkered around with Firewall for some reason.. now when i come home my Wifi is working but WAYY slower.. HELP ME PLEASE I HAVE AN EXAM TO STUDY FORR 😭😭🙏🙏


r/HomeNetworking • • 7h ago

Collegare rete cellulare 5G al PC Microsoft 10 tramite USB

Thumbnail reddit.com
1 Upvotes