r/HomeNetworking • u/bolbism666 • 1m ago
r/HomeNetworking • u/Powerful_Mousse5466 • 7m ago
Advice Need advice on upgrading router for fiber optic 1 gig. eero or something else?
I currently have a eero mesh 6 (not the +) that I'd like to upgrade. We recently upgraded to fiber optic 1gig and while the eero works fine, we're obviously not seeing the wifi speeds that we are paying for. I'd like to take advantage of the Black Friday deals and upgrade our eero.
Things to note.
- I have a smaller home at only 1300sq ft
- The router is in a bedroom furthest from the living room and currently have a mesh in the living room.
- Do I need a mesh or will a single router be enough?
- I have cat 6 cable ran into different areas of the home including the living room so I could connect wired which I currently cannot do since the eero 6 doesn't have that option.
- No gaming so that is not important to us.
I'm not very knowledgeable when it comes all the latest tech features. I see wifi 6/7 and honestly don't know what would benefit us the most. All of our devices are several years old ranging from firesticks, Roku, Ring cameras etc. According to the eero app we have 45 devices connected. Ideally I would like something that is set it and forget it and something that will not require me to reprogram all of our devices to. I'm not sure if it's as simple as keeping the same network name and password or if I switch from eero completely if I will have to reprogram all our devices?
Any advice would be greatly appreciated, thank you all.
r/HomeNetworking • u/Material-Advice-335 • 8m ago
Router suggestions?
Been stuck w att internet for over 10 years. I'm going to try spectrum to see if it's any better than last time I had it. They want to charge me $10 per month for a router. But I think I'd rather just buy my own outright... Since I'm sure there's aren't exactly top quality. Can anyone recommend something for a 1500 sqft 1 story house? We do a lot of gaming and streaming (probably up to 8 devices tho not all at once). Ideally something that isn't crazy expensive either or hard to setup lol. Thnx
r/HomeNetworking • u/LiesTheCakeIs • 32m ago
Advice Will this improve my WiFi Range?
I have the standard EE Smart Hub 6, but have been looking to see if getting a GL.iNet Flint 2 would see better WiFi performance, specifically for range.
I know there would be other, better solutions, but I have reasons I can only have a 1 router setup, and this seems the best router in my budget. I just don't want to buy it if there will be basically no change.
r/HomeNetworking • u/Babygator11 • 35m ago
Advice Black Friday Buying Advice: Eero Pro 7 or TP Link BE13000(Costco)
Hello,
Looking for advice on the following mesh systems for a 3200sq Ft, two story home. Goal is ability to do cloud gaming/remote play with little latency and to have a bit of range for the back patio. Wired connection is 5GBps but could move to 8GBps at a later date.
Looking at the Eero 7 Pro (3 pack) from Amazon for $599
Or the TP Link BE13000 3-pack from Costco for $349
https://www.costco.com/.product.4201003302.html
The Eero seems a bit simpler to setup and has a few more premium features I may not use like Matter. Really speed, range, and latency are biggest priorities. The Eero 7 Pro seems like the better system, but not sure if itβs worth a $250 price delta. Any advice you have would be awesome. Thank you!
r/HomeNetworking • u/Jayce_of_Spades • 1h ago
Advice PS5 Downloading a Game or Firmware stops all other network traffic
This has been happening since September and I have yet to figure out what's going on. I'm hoping the internet can help....
I have an ASUS RT-AX86U Router (the non-Pro version), and ever since Sept I've noticed that whenever my PS5 downloads a game or firmware update, all the other devices on my network slow to a crawl, to the point of being unusable until the download finishes or I pause it.
I've logged into the router admin page to look at the traffic and the PS5 when downloading is only pulling average of 50-60 Mbps on a wired gigabit connection from my ISP, AT&T. I've tried tweaking QOS settings and limiting the download bandwidth but that has no effect.
With speedtest.net on my home PC on a wired connection, my speeds are averaging 900 down 800 up 2ms ping when the PS5 isn't downloading. When it is downloading, and try to run the same test, I get a latency error and the tests fails. Attempting to go to any website results in a "timeout" message in my browser. I have multiple Apple TVs, none of them can stream a video with the PS5 downloading.
I've tried multiple factory resets of both the router and the PS5, I've tried multiple versions of ASUS' router firmware. I've even tried custom firmware from ASUSWRT-Merlin. I've test my PS5 on both ethernet and wi-fi, same result.
Now I'm to the point where I'm about to ditch this router and buy a new one. But before I do that, is there anything I'm not thinking of that I haven't tried yet?
r/HomeNetworking • u/Helpful_Nest0 • 3h ago
Advice Would you pay 80 SEK extra for 500/500 over 100/100?
A friend and I disagree about my broadband renewal. Both options have a 12 month contract, but 500/500 costs 80 SEK more per month. I think 100/100 is enough for streaming, browsing and occasional gaming, especially since I can leave big downloads running overnight. He thinks faster downloads are worth the difference even if I only notice it a few times a month.
For anyone who's gone from one to the other, did you miss the extra speed beyond downloading games?
r/HomeNetworking • u/Yahyapro3 • 4h ago
Slow network due to firewall or sm.. dk tbh
I don't even know what to say... Seeing that guy having WiFi 7 pisses me off tbh π (jk)..
Can someone help tho? School WiFi didn't work for sm reason, and i thought i could try and figure it out, so i tinkered around with Firewall for some reason.. now when i come home my Wifi is working but WAYY slower.. HELP ME PLEASE I HAVE AN EXAM TO STUDY FORR ππππ
r/HomeNetworking • u/ClassicFit5529 • 4h ago
Is 300 mbps enough?
Unfortunately, xfinity is literally the only option in our apartment complex so we will be going with them. There is two of us so there would be two phones a MacBook Pro, MacBook Air a Mac studio an iPad possibly a PS5 and two TVs. Would 300mbps be enough for all these devices? Or what 500 would be better? We are new to buying Internet.
r/HomeNetworking • u/PcGamerSam • 4h ago
Advice Incoming broadband coax adapted to satellite dish antenna cable?
I have kind of a strange question. I have an incoming coax connection in my living room for my broadband. I would like to re-locate my router modem to another room. My plan is to buy the adaptors in the picture Iβve attached to convert the coax to satellite antenna port so i can plug the incoming coax into the pre existing sockets in the wall then do the reverse in the room i would like the router to be in.
Any issues i can expect with this or will it just work?
r/HomeNetworking • u/SeberHusky • 4h ago
Advice MSI Router/Fiber Passthrough First Setup Advice
I just got my MSI router setup through a passthrough with my ISP router, it's all good and working. I just want to know is there anything I need to know in the MSI's settings to make sure it's all setup good and secure on a home network and if I didn't miss anything. I've been up all night so I'm beat. lol It's the Radix AXE6600
r/HomeNetworking • u/adamtd893 • 5h ago
Anyone else got a floating U6 Pro access point suddenly asking to be adopted?
galleryr/HomeNetworking • u/M_Six2001 • 5h ago
Advice Small smart UPS
I have several small battery backup units (like APC BE600) scattered arond the house. For instance, there's one behind the TV cabinet and one out in the shed, etc. These aren't so much there for extended outages, but rather for the frequent momentary power blips we seem to get here. They keep everything running for a few seconds until the power comes back. They all work well, but they have the same problem. When the battery cells get old and need to be replaced, the alarm goes off and it can't be muted. There is also no way to tell if the battery is getting close to needing replacement. So I'd like to find a small battery backup that works with some sort of app so I can monitor battery health. Something that sends me a notice that the battery is under 20% or whatever would be perfect. I know there are larger units that will do this, but I'm hoping to keep using small units that fit in the currently available spaces.
Anyone know of a smart battery backup that is small in size?
r/HomeNetworking • u/ikea2000 • 7h ago
Advice 10 seconds to connect to wired router!
Helping a friend in his house. Heβs got a router, and a battleworn cat 6 cable down to the cellar. when I connect my laptop it takes about 10 s before the port lights up. While I advise to change the cable, Iβm still wondering.
What causes such a long delay?
Iβm used to 0,5 seconds to get a connection over Ethernet.
r/HomeNetworking • u/Haunting-Swing6415 • 7h ago
Cudy WR3000P (SN 2624) β WAN port dead / not recognized on OpenWrt, forcing LAN fallback. Any fixes for newer hardware revisions?
reddit.comr/HomeNetworking • u/Herr_GlaurO • 7h ago
Collegare rete cellulare 5G al PC Microsoft 10 tramite USB
reddit.comr/HomeNetworking • u/Goldie323- • 10h ago
SSH login issue, could be openWRT related?
I have openWRT routers set up in my home, I have a two computers behind it, one has a navidrome and jellyfin server running behind nginx, and then I have the other computer with minecraft servers running on it and SSH access setup. Whenever I'm outside the house and connected to my navidrome server or minecraft server ssh fails to connect, I disconnect from navidrome or minecraft and it immediately works again.
My main openWRT router is placed behind my ISP given gateway device, maybe my gateway device is blocking two connections from the same IP?
the specific error SSH gives it a 'kex_exchange_identification: read: Connection reset by peer'
I have added a basic diagram of my home networking situation.
edit: never made a post with an image before, so I accidentally attached it twice.
r/HomeNetworking • u/Alert_Secretary_5041 • 10h ago
Advice Wifi speeds drops constantly, turning it off fixes it briefly?
reddit.comr/HomeNetworking • u/Profound-4959 • 11h ago
How to connect a router to JioFiber - Wireline and get a IPv6 address
I have a wired Jio Fiber connection. My house has two floors. On the ground floor I can connect using a Ethernet hub and Wifi network. But on the top floor I cannot connect to the JioFiber router, due to attenuation and range. I have installed a Wired Ethernet 100 Mbps cable to the top floor, connected to JioFiber router. Using this cable I would like to configure my own personal Router and use it on top floor. Ground floor devices, like TV STB, Mobile devices, etc will connect to JioFiber router. The top floor devices, like Gaming Console, Laptops and Mobile devices will connect to my personal WiFi router.
I am not interested in setting up my personal router as a bridge or as a AP Client, connected to Jio Router.
The issue is that on my personal router on top floor I get a IPv4 address assigned from JioFiber router. But my personal router fails when it tries to get a IPv6 address from JioFiber router. So devices that I connect to my router are unable to get onto internet. Especially apple and Android devices. Windows devices I can configure to use only IPv4 and network works just fine. But for any Apple devices and Android devices internet does not work.
So how do I get a IPv6 address for my personal router from JioFiber Router? Or do I have to configure the routing table on my personal router to route all IPv6 requests to IPv4?
r/HomeNetworking • u/SCOOkumar • 11h ago
OK Wow I did not know Wifi 7 was truly capable of these speeds..
galleryAny legends out there clocking in higher over Wifi?
r/HomeNetworking • u/luffy67goat • 13h ago
Advice Need help with something
So basically I have a router connected my pc using a lan cable, i had to because i was getting over 500 ping in Valorant and that was the only solution, and now my pa5 is lagging way too much and spiking and freezing. Is it because the lan cable is plugged into pc, i did research and people r saying having pc plugged into lan shouldnt slow down any other devices internet speed, the router r in the same room as ps5 and pc btw. Can someone help pleaseee
r/HomeNetworking • u/Current_Inevitable43 • 13h ago
Trying to get a eap to work wirelessly
reddit.comr/HomeNetworking • u/Designer-Bar8831 • 13h ago
Help with diabolical mess of a panel
Hi all
Posted a while back and got some help which was really useful
I have this panel inside my kids wardrobe. There isn't much space and the wifi router is constantly getting knocked so I want to move it downstairs.
The Chorus router is just an ONT so I have my wifi router plugged into that. It then feeds the rest of the house
How would I go about moving the wifi router downstairs, but still have all the LAN ports in the house connected?
Does that make any sense? I have a gigabit switch handy but unsure if that's useful at all here
r/HomeNetworking • u/FernwehSmith • 15h ago
Safely powering network with UPS and PoE
Hello everyone. I'm in the process of upgrading my home network. I think I've read a few too many articles and forum threads and overloaded myself with information. I'm a bit confused on a couple of things. Specifically regarding powering devices on the network.
UPS and Power Boards
I've got a CyberPower VP700 UPS powering my NAS. I want to power my router, WAP, and two switches off that UPS as well, so that I still have a basic network for a bit in a power outage. Problem is that the UPS only has two unused outlets remaining. I've read in some places that you should never use a power boards with a UPS, and in other places that power boards can be fine as long as they're not surge protected (and you don't exceed the UPS power limits). I consulted the UPS user manual but it didn't mention power boards at all. It did, mention "Avoid using extension cords.", but didn't specify wether that meant extension cords going into the UPS, or the UPS going into an extension cord.
- Would a power board fall under the umbrella of "Extension Cord"?
- If the first answer is no, what power features should I look for or avoid to be safe? I understand that a surge protected board is probably a no go (although I don't fully understand why). Would overload protection be okay?
- If power boards are a flat no, would plugging in a USB charging hub (something like this) be okay to power the devices that accept USB-C inputs?
PoE and Patch Cables
I read that PoE works best with solid-core cables. In my network, all cables coming out of devices that can provide PoE will be typical stranded patch cables. Does this meaningfully change the capabilities or safety of using PoE? If I understand correctly, the stranded cables have higher resistance, and therefore produce more heat than a solid-core cable. Is this difference likely to be at all significant in situations where a patch cable would typically be used? And if so, what do I need to consider and what specs on the cable should I look for (besides absolutely not being CCA)?
While we're on the topic of cables, does brand matter much in the quality of the cable? I've seen Cable Matters and Monoprice mentioned a few times, but I'm also seeing some sales on some other brands like Tecmojo. Are there any brands to avoid or gravitate towards or does it not really matter?
I really appreciate any insight anyone can provide! I'm a bit paranoid when it comes to power so I just want to make sure I understand the what and why.