r/Kombucha • • Sep 18 '21

what's wrong!? Is it mold? Is it normal? What's growing in your kombucha? Start here!

581 Upvotes

Welcome to r/Kombucha! If you're wondering what's growing on your kombucha and if it's normal, you've come to the right place.

Please review this information before posting a picture of your batch to the subreddit.

TL;DR:

  • Dry + fuzzy on the surface of the liquid/pellicle/SCOBY is most likely mold: mold pics https://imgur.com/a/SzhysHi
  • Geometric growths or wrinkly patterns on the surface of the liquid/pellicle/SCOBY could be kahm yeast: kahm pics https://imgur.com/a/XlnO7Ox
  • Anything else and anything under the liquid level is most likely normal: normal pics https://imgur.com/a/HJaENDv
  • If you're not sure, wait a few more days: mold or kahm will get more obvious as they grow, normal will stay about the same or form into new pellicle/SCOBY
  • If the kombucha is already bottled for carbonation (commonly called second ferment or 2F), mold/kahm is very unlikely due to the high acidity and lack of oxygen access.
  • Always use at least 2 cups of starter per gallon (125ml/L) when making kombucha to acidify the batch: high acidity (pH < 4.6) protects the kombucha from mold and kahm.
  • Read our getting started guide for brewing tips: https://www.reddit.com/r/kombucha/wiki/how_to_start

Terminology: in this guide, "pellicle/SCOBY" refers to the rubbery blob that forms at the surface of a batch of kombucha. SCOBY stands for "symbiotic culture of bacteria and yeast", and those bacteria + yeast are found both in the liquid kombucha and in the solid rubbery blob. The rubbery blob's more accurate scientific name is "pellicle": it's a biofilm/mat of bacterial cellulose secreted by and connected to the bacteria forming it (some yeast also live in the pellicle). Culturally, however, the term "SCOBY" widely refers to the pellicle so this guide uses both terms.

Read more about pellicles here:

Diagnostic Quiz

1 ) Is the growth/odd thing on the top surface (exposed to air) of the liquid kombucha or existing pellicle/SCOBY?

  • Yes - go to 2
  • No - go to 8

2 ) Is the kombucha already bottled for carbonation (commonly called second ferment or 2F)?

  • Yes - likely pellicle/SCOBY growth (it can happen in 2F!) or a yeast cluster. Mold/kahm are extremely rare in 2F due to the high acidity (pH <4.2) and lack of oxygen access (required for mold to grow). Booch on!
  • No - go to 3

3 ) Is the growth dry and fuzzy looking with white or green color, and/or with black spores growing out of it?

  • Yes - likely mold. Go to Mold section for pictures.
  • No - go to 4

4 ) Is the growth a wrinkly or geometric pattern, very rough patterned surface, or very large air-y bubbles that cover large areas of the surface?

  • Yes - likely kahm yeast. Go to Kahm section for pictures.
  • No - go to 5

5 ) Is the growth one of: white/translucent + wet, disconnected oily/patchy sections, or a thin film with bubbles trapped underneath?

  • Yes - likely normal pellicle/SCOBY growth. Go to Normal section for pictures.
  • No - go to 6

6 ) Is the growth flat, leathery, and brown?

  • Yes - likely a dried out pellicle/SCOBY area. Go to Normal section for pictures.
  • No - go to 7

7 ) Is the the growth brown/black, wet, and partially/completely surrounded by pellicle/SCOBY?

  • Yes - likely a yeast cluster. Go to Normal section for pictures.
  • No - probably normal, but review all Normal, Kahm, and Mold pictures to be safe.

8 ) Is the growth/odd thing completely submerged in liquid?

  • Yes - likely yeast. Yeast can form dark brown clumps in the liquid or on the pellicle/SCOBY, or alien-like formations suspended in the liquid. Mold and kahm cannot grow beneath the surface of the liquid without also showing on the surface exposed to air. Go to Normal section for pictures.
  • No - go to 2

Normal

Gallery of normal kombucha: https://imgur.com/a/HJaENDv

Pellicles/SCOBYs have a ton of natural variation. A normal pellicle/SCOBY should look wet, tan/white/translucent, and be mostly smooth (some bumps are normal). There may also be wet brown/black yeast blobs that attach to the liquid side of the pellicle/SCOBY, get absorbed into the pellicle/SCOBY, or float around inside the liquid.

Mold

Gallery of mold: https://imgur.com/a/SzhysHi

Mold occurs when the kombucha is not acidic enough (pH < 4.6) to prevent mold organisms from growing. Other factors that make mold more likely are unsanitary conditions and cold brewing temperatures (<65F/18C).

If there is mold on your batch:

  • You must throw away everything (liquid + pellicle/SCOBY) and start from scratch with fresh starter tea. By the time mold is visible on the surface of the brew, it has already contaminated the entire batch.
  • Sanitize the vessel, cloth cover, and any utensils used in brewing with a homebrew sanitizing solution (StarSan, OneStep, SaniClean, potassium metabisulfite, etc) or throughly wash with soap + hot water followed by a pasteurized distilled vinegar rinse (no raw vinegar, which contains live microbe cultures).

To prevent mold, the most important thing is to use at least 2 cups of starter tea per 1 gallon of kombucha (125ml per L) to acidify the batch. Starter tea is mature kombucha: either from a previous batch (yours or a friend's), from a SCOBY hotel, or from raw/unflavored/unpasteurized commercial kombucha such as GTs or Health-Ade.

This amount of starter tea is a good rule of thumb for safe acidity: if you have a pH meter or strips, check that the starting pH is <4.6. Another important factor is maintaining clean/sanitary brewing practices: however, because kombucha is an open air ferment some mold organisms may get in even with a cloth cover, which is why acidity is also important.

Kahm Yeast

Gallery of kahm: https://imgur.com/a/XlnO7Ox

“Kahm” is a generic term for many species of usually non-harmful but also non-desirable wild yeast that can take hold in kombucha (outcompete the kombucha culture) and appear as surface growths on the the pellicle/SCOBY. Kahm often looks geometric or wrinkly vs the smooth/bumpy normal pellicle/SCOBY.

See this excellent writeup about the science of kahm yeast from u/daileta in r/fermentation: https://www.reddit.com/r/fermentation/comments/ytg2vy/kahm_down/ Their post is focused on lacto fermented vegetables (not kombucha) but is worth a read.

Kahm itself isn’t usually dangerous, but to quote our resident food microbiologist u/Albino_Echidna: “Kahm is a term used to lump a whole bunch of unwanted yeasts together, all of which are indicative of an unsafe fermentation environment. Kahm growth is indicative of a fermentation gone wrong. 'Kahm' itself isn’t harmful, but it is a warning sign that your environment wasn’t quite right and will be at higher risk of pathogenic growth as a result."

If your batch has kahm, it is up to you whether to toss + sanitize + start over with fresh starter kombucha or to try to scrape off the kahm from the surface and continue brewing. It is always safest to toss and restart - see the instructions in the Mold section.

To help prevent kahm, use at least 2 cups of starter tea per 1 gallon of kombucha (125ml per L) to strongly establish the kombucha culture and acidify the batch. Kahm may also be related to unsanitary conditions, high brewing temperature (>85F/30C), or oversteeping tea (>1hr, but may vary).

Further reading: https://www.reddit.com/r/kombucha/wiki/whats_wrong

If you still aren’t sure after comparing your batch to the pictures here, please make a post and ask!


r/Kombucha • • 2d ago

r/Kombucha Weekly No Stupid Questions + Open Discussion (November 16, 2026)

1 Upvotes

This is a casual space for the r/Kombucha community to hang out: feel free to post about anything kombucha or brewing related. Questions from new brewers are especially welcome - no question is too big or too small!

New to kombucha? Check out our getting started guide and FAQ.


r/Kombucha • • 1h ago

question Third generation batch after starting with store-bought, looks dry-ish but not fuzzy, is this okay?

Thumbnail
gallery
1 Upvotes

After starting with kombucha from the store, I had two batches that did not form a pellicle but tasted great, and this is the third batch that shows way more activity. This is one week old and smells okay so I wanted to test to start 2F. But this is new to me and I'm not fully calibrated on mold.

It is not a pellicle, but a thin layer of this. It falls apart when touched with a fork. It looks dryish, but I'm not really seeing the white and green fuzzies I've seen before.

Can I taste this?


r/Kombucha • • 1h ago

question First time kombucha does it look okay?

Thumbnail
gallery
1 Upvotes

r/Kombucha • • 5h ago

Kombucha nach ca. einem Monat Erstfermentation – kann ich ihn noch verwenden und welchen SCOBY nehme ich?

2 Upvotes

Hallo zusammen! 😊
Ich habe schon öfter Kombucha selbst gemacht und sowohl die erste als auch die zweite Fermentation durchgeführt. Jetzt ist bei mir privat allerdings einiges dazwischengekommen und ich habe meinen Kombucha vermutlich ungefähr einen Monat in der ersten Fermentation stehen lassen.
Jetzt frage ich mich, ob ich ihn noch ganz normal weiterverwenden kann.
Meine Idee wäre, den Großteil der Flüssigkeit abzugießen und nur einen Teil als Ansatzflüssigkeit (Starter Tea) zurückzubehalten. Anschließend würde ich wie gewohnt neuen, gesüßten Tee dazugeben und eine neue erste Fermentation starten.
Außerdem hat sich mittlerweile einiges an SCOBY-Material gebildet. Ich habe also mehrere Schichten bzw. einen älteren und einen neueren Pilz. Welchen davon sollte ich am besten für den neuen Ansatz verwenden? Ist der obere, neu gebildete SCOBY der richtige oder kann ich auch den unteren, älteren verwenden?
Gibt es einen Unterschied zwischen den beiden und sollte ich den alten eventuell aussortieren?
Hat jemand von euch damit Erfahrungen gemacht?
Vielen Dank schon mal! 😊


r/Kombucha • • 3h ago

question Forgot about this one for a few months, is it still OK to bottle?

Thumbnail
gallery
1 Upvotes

This got left for 2 or 3 months, I'm pretty new to brewing so wanted to check if this was OK. Yea it's vinegary, but I don't mind that part. The color is just lighter than others I've done. The pilacle looks fine, but figured I'd reach out to people with more experience.

Also, is canned Dole pineapple juice ok to use or does it have to be fresh?


r/Kombucha • • 3h ago

Ketogluconate production by Gluconobacter strains: enzymes and biotechnological applications

1 Upvotes

r/Kombucha • • 8h ago

what's wrong!? Ist das normal?

Post image
2 Upvotes

Habe meinen Scoby nach dem letzten Abgießen geteilt, da er schon sehr dick war. Nun sieht die neue Schicht allerdings etwas seltsam aus. Sie entsteht nicht an der Oberfläche sondern wächst von einer Seite zur anderen. Sie ist auch auffällig dick und weißer als sonst.


r/Kombucha • • 5h ago

question Kombucha nach ca. einem Monat Erstfermentation – kann ich ihn noch verwenden und welchen SCOBY nehme ich?

1 Upvotes

Hallo zusammen! 😊
Ich habe schon öfter Kombucha selbst gemacht und sowohl die erste als auch die zweite Fermentation durchgeführt. Jetzt ist bei mir privat allerdings einiges dazwischengekommen und ich habe meinen Kombucha vermutlich ungefähr einen Monat in der ersten Fermentation stehen lassen.
Jetzt frage ich mich, ob ich ihn noch ganz normal weiterverwenden kann.
Meine Idee wäre, den Großteil der Flüssigkeit abzugießen und nur einen Teil als Ansatzflüssigkeit (Starter Tea) zurückzubehalten. Anschließend würde ich wie gewohnt neuen, gesüßten Tee dazugeben und eine neue erste Fermentation starten.
Außerdem hat sich mittlerweile einiges an SCOBY-Material gebildet. Ich habe also mehrere Schichten bzw. einen älteren und einen neueren Pilz. Welchen davon sollte ich am besten für den neuen Ansatz verwenden? Ist der obere, neu gebildete SCOBY der richtige oder kann ich auch den unteren, älteren verwenden?
Gibt es einen Unterschied zwischen den beiden und sollte ich den alten eventuell aussortieren?
Hat jemand von euch damit Erfahrungen gemacht?
Vielen Dank schon mal! 😊


r/Kombucha • • 10h ago

flavor How long is too long for F1

2 Upvotes

Hi. I started my homebrewing Kombucha about a year ago to spectacular beginner’s success/luck. I used to leave F1 for 2-3 weeks and then flavour with ginger and raspberries or strawberries at room temperature for about a week to varying degrees of fizziness. Sometimes I would add some sugar for F2 other times I would use a raspberry preserve. It was great. I loved it!
Then around Christmas time the resultant Kombucha was quite(VERY) acidic. I had been messing with the amount of sugar added, not wanting to add too much, blah blah…
Over the summer I lost interest and have only recently begun again.
A few weeks ago I set up my new first batch. Unfortunately RL got in the way and it’s been sitting there for at least three weeks. I used to use fermenting time and not taste to determine when to move on to F2.
It looks great albeit quite cloudy. I was extra generous with the amount of sugar I used and the pellicle is enormous and healthy looking. I am hoping and planning to flavour and bottle it tomorrow for F2.
How can I be sure that it is worth bottling at this stage?
If I add lots of sugar will it counteract the acidity and improve the flavour during F2?
I am planning on using my old favourites of ginger with either fresh strawberries or raspberries but more likely raspberry jam.
What should I do?
Is it a waste of time to bother with flavouring and bottling it at this late stage?
Any advice greatly appreciated.
TIA
J


r/Kombucha • • 16h ago

what's wrong!? Did I do it?

Thumbnail
gallery
2 Upvotes

About 3 weeks in to my first ferment. I had to go out of town for a while so its gone a bit long. Its ugly but i think its okay. Mostly im concernedngy a sort if strange dry bubble-wrap like texture ontop of the pellicle and a little dry brown spot. It almost looks fuzzy but i dont think it is.


r/Kombucha • • 20h ago

Kombucha zombie o con esteroides?

Post image
4 Upvotes

Hola buenas,

escribo acá para saber cual de las dos opciones puede estar pasando con mi kombucha. Lleva unos 4 días en este té y hoy cuando fui a verla tenía esas burbujas café. Busqué en el foro y varias fotos similares dicen que es una kombucha sana y potente pero no tengo el ojo entrenado. Dejo de preocuparme o la boto?

Gracias a quienes respondan


r/Kombucha • • 15h ago

Beautiful scoby

Thumbnail
gallery
1 Upvotes

Ready for harvest. Smells nothing like vinegar. It smells sour. But nothing like acetic acid. My booch isn't vinegar.


r/Kombucha • • 1d ago

question New brewer, first starter

Thumbnail
gallery
5 Upvotes

I started my first scoby on November 14 I did
-4cups black tea
I bottle of synergy pure unflavored kombucha
1/3 of sugar
And split them among 3 jars to hopefully to form multiple pellicles and just for back ups in case one fails.
I have a couple questions.
Does it look normal I know it’s only been a couple days but I see a little something forming around the edges.
How long typically till the pellicle forms I was told two weeks. And does temperature affect it. The video I seen her pellicle started forming around day 5 my house is also a little on the colder side does that matter at all. If I had to guess the room I have it in is about 69-degrees.
Thank you:)


r/Kombucha • • 1d ago

what's wrong!? Is Kombucha just not for me?

4 Upvotes

First, let me put my pre-conditions here:

  1. I am not allergic to wine, beer, and alcohol;
  2. I drink black tea with honey very often.
  3. So far, I am not allergic to anything I knew.

I started making and drinking kombucha a couple of months ago. When I was first time drinking kombucha, immediately I saw small red spots popping up on my face; then I stopped it, the red face was gone in one day.
A couple of weeks later, I started drinking one cup per day, no spots showed up on my face but I still see my face turned a little bit to red.
Today, I dunk two cups and wooooo, the red face with small spots showed up again.
I checked Chinese accuponture system map, it indicates that the face areas belong to stomach system and liver system.
I assume I must be allergic to some bacteria growing during the fermentation process.
Should I stop drinking kombucha at all, or try the store-purchased brand? Please advise! Thanks


r/Kombucha • • 12h ago

beautiful booch https://pmc.ncbi.nlm.nih.gov/articles/PMC10221066/

0 Upvotes

Y'all want links?


r/Kombucha • • 13h ago

beautiful booch How I make sweet tea for kombucha

Post image
0 Upvotes

I throw the entire tea bags into the pot. Half a cup of sugar, this isn't concentrate. Just 6 bags of tea (4 black, 1 Earl grey, 1 chai). If you want to do concentrate I would double the amount of sugar and tea. Then I would dilute it with 64 Oz of water.

I'm not doing concentrate today. I'm gonna bottle about 6 or 7 bottles. 50 percent sweet tea (what I'm making) it'll be poured into the bottles boiling hot and shaken to "heat treat" the vessel. This kills invaders. Invaders must die. So dramatic!

Then after the tea cools I'll add the mother of kombucha, the scoby. And I agitate these vessels before hand. I love 1.5L GT bottles. I put the lid on and shake them up for a good while. Until add sediment is in solution. The scoby is in the sediment, the pellicle or biofilm, it is all pervasive. But different cultures like to hide in different places. The liquid is mostly dominated by anerobic yeast. The surface is where the obligate aerobes hang out. And we want those obligate aerobes, like gluconobacter and kamagataeibacter. Agitation ensures consistency.

Then I'll make more tea. No chai or Earl grey. Just plain black tea and sugar to feed the mothers. Orange pekoe is ideal.

Happy brewing.


r/Kombucha • • 1d ago

what's wrong!? Are the white spots around the pellicle mold?

Thumbnail
gallery
2 Upvotes

everything looked fine but I tasted my kombucha at 3.5 pH last night and 10 minutes later I had stomach cramps. the pellicle overall looks fine to me but there are these white spots around the edge. are those mold?


r/Kombucha • • 1d ago

I’m in doubt if this is safe.

Post image
2 Upvotes

It’s my first foray into the exciting world of Kombucha, and I’m in doubt if I should just toss this and start over.

I initially added way too little starter fluid.

Like 2 deciliter to a 5 liter batch.

My mighty booch is 10 days old at this point, and on paper it seems fine.

No mold, and a slightly acidic taste with a bit of carbonation.

But the first week it had no acidity at all. Could it have been contaminated in this period?

Is it safe to drink?


r/Kombucha • • 18h ago

Glucuronidation

0 Upvotes

So many people think kombucha is just vinegar. Acetic acid.

You dunno what you're on about.

Good kombucha is fermented between 68F and 72F. Maybe colder. GTs does this in refrigerated spaces. I don't have the exact temp. It's in the 60s, from what I hear. This forces the gluconobacter and kamagataeibacter to directly convert glucose into gluconic and glucoronic acids. Higher temperatures will increase the yeast fermentation exponentially leading to ethanol leading to acetobacters making vinegar from that ethanol. Cooler is better.

These acids are tremendous. They are the precursor for joint lubricating chondroitin. They detoxify the liver. They chelate minerals and metals and bring them into solution. Allowing the body to excrete heavy metals.

Kombucha is medicine.

Happy brewing.


r/Kombucha • • 1d ago

what's wrong!? First time trying to make Kombucha

Thumbnail
gallery
1 Upvotes

Hi, first timer here. Recap: I bought a scoby with starter liquid and put it in sweetened black tea (room temperature) for 10 days, then I did that process again to grow a new scoby that was thick enough. Then took both (Scoby Father and Son) and put it in a bigger jar with 1lt black tea (80gr of sugar, room temperature) and 100ml of starter liquid. After 2 days (nov 7) it looked good to me. - see pictures On Nov 9, it looked strange.. not sure whether it was developing mold or not. Today Nov 17 the scoby has developed a lot, but I am not sure if there is mold or if this is ok. PH 2.16. Do I throw everything away? Grazie!


r/Kombucha • • 1d ago

what's wrong!? Greenish smooth stuff on pellicle

Thumbnail
gallery
1 Upvotes

Trying to identify what happened to our pellicle! It isn’t fuzzy so doesn’t necessarily look like mold but it’s definitely weird. Thoughts on what this could be?


r/Kombucha • • 1d ago

question First Kumbucha

Post image
1 Upvotes

This is my fist time making bumbucha. I did a 9 days ferment in the cupboard. Can I please have some input if it's good?


r/Kombucha • • 1d ago

Is this salvageable?

Thumbnail
gallery
1 Upvotes

I went to test my kombucha to see if it was ready for F2, and noticed some mold at the top of the jar. It looks like it's growing half on the jar, half on the newly formed pellicle. Admittedly, there wasn't as much headspace in this jar as I would've liked, but my starter pellicle was massive and displacement is a bitch. Anyway, is the kombucha and/or pellicle (newly formed and starter at the bottom of the jar) salvageable, or is it officially contaminated?