r/LLMPhysics • • 20h ago

Personal Theory Early quantum mechanics and the explanatory reach of classical wave theory

3 Upvotes

From Spectral Lines to Wave Mechanics (Zenodo PDF)

How much of the quantum mechanics of the hydrogen atom can be reconstructed, understood or quantitatively explained with the mathematical and physical principles of classical wave theory? And which additional quantum principles are indispensable to complete that reconstruction?

This essay addresses these questions through a systematic investigation of both the explanatory power and the limitations of classical wave theory. It examines how far the mathematical structures and physical phenomena of the hydrogen atom can be understood by extending concepts from classical vibrations, optical waveguides and electromagnetic radiation, and it identifies where these classical concepts cease to be sufficient.

The central thesis is that classical wave theory can explain a surprisingly large part of the mathematical architecture and several important physical features of hydrogen wave mechanics. It offers a natural, if somewhat unorthodox, route to understanding the stationary eigenvalue problem, the gross-structure spectrum, the structure of the wavefunctions, interference phenomena and significant aspects of radiation and quantum dynamics. Moving from classical waves to quantum mechanics nevertheless requires additional principles: Planck's constant, through the de Broglie relation; the probabilistic (Born) interpretation of the amplitudes; the discreteness of measurement outcomes; and the quantization of the electromagnetic field. Each of them enters at an identifiable stage, precisely where the explanatory reach of classical wave theory ends.

Of course, the topic is 100 years old, but I have tried to write an introduction that revitalizes the original transition from classical wave mechanics to a probabilistic quantum theory.


r/LLMPhysics • • 20h ago

Meta A sum rule for the deceleration parameter and a model-independent test of slowing cosmic acceleration

1 Upvotes

Abstract
Consider a flat or open FLRW universe in general relativity. Its content is a set of separately conserved components with non-negative densities. For such a universe we derive the exact identity
q′ = (3/2) ∑ᵢ Ωᵢ wᵢ′ − (9/2) Var_Ω(w).
Here a prime denotes d/d ln a, and Var_Ω is the variance of the equations of state weighted by the density fractions.
It follows that the deceleration parameter can grow with time (q′ > 0, "slowing acceleration") only in two cases. Either some component has an equation of state that increases with time (thawing-type), or one of the assumptions fails (no energy exchange, non-negative densities, GR).
For mixtures of constant-w fluids, phantom ones included, H² is a positive Laplace mixture in N = ln a. Then q′ = −½ Var(λ) with λ = 3(1 + w), and equally spaced samples of H² must form positive-semidefinite Hankel matrices of Stieltjes type. These conditions are invariant under rescaling of H², so they apply directly to D_H/r_d, independently of r_d and H₀.
DESI DR2 line-of-sight BAO data satisfy the three-point form of the test. Their present precision, however, cannot resolve the curvature expected even in ΛCDM.
In w₀w_a fits, q′₀ > 0 at the best fit for DESI+CMB+DESY5 and DESI+CMB+Union3, but not for DESI+CMB+Pantheon+. For DESY5 the violation is confined to z ≲ 0.10. A linearized propagation of the published uncertainties gives q′₀ = 0.33 ± 0.30, about 1.1σ. The strong preference for w₀w_a over ΛCDM therefore does not translate into strong evidence for slowing acceleration.

1. Introduction
DESI DR2 BAO combined with CMB and supernovae prefers dynamical dark energy over ΛCDM at 2.8–4.2σ, depending on the supernova sample. The favored solution lies in the quadrant w₀ > −1, w_a < 0.
A recurrent interpretation is that cosmic acceleration has peaked and is now declining. For example, Wu, Wang and Yu report j(0) < 0 at more than 1σ for several DESI combinations within w₀w_aCDM.
These analyses are parametric. Here we ask a structural question instead: which classes of cosmic content can produce slowing acceleration at all? The answer is an exact sum rule. It yields a no-go theorem and a test that can be applied directly to distance ratios.

2. An exact sum rule
Let N = ln a and write H² = ∑ᵢ ρᵢ(N) in units 8πG/3 = 1. Each component is separately conserved, with ρᵢ′ = −3(1 + wᵢ)ρᵢ and ρᵢ ≥ 0. An open curvature term (Ω_k ≥ 0) is included as a component with w = −1/3.
Define the density fractions Ωᵢ = ρᵢ/H². From q = −1 − ½ (ln H²)′ we obtain:
Proposition 1.
(ln H²)″ = −3 ∑ᵢ Ωᵢ wᵢ′ + 9 Var_Ω(w),
and therefore
q′ = (3/2) ∑ᵢ Ωᵢ wᵢ′ − (9/2) Var_Ω(w),
where Var_Ω(w) = ∑ᵢ Ωᵢ wᵢ² − (∑ᵢ Ωᵢ wᵢ)².
Proof. Write Z = ∑ᵢ ρᵢ. Then:
Z′/Z = ∑ᵢ Ωᵢ (ln ρᵢ)′
Z″/Z = ∑ᵢ Ωᵢ [(ln ρᵢ)″ + ((ln ρᵢ)′)²]
Hence (ln Z)″ = ∑ᵢ Ωᵢ (ln ρᵢ)″ + Var_Ω((ln ρᵢ)′). Substitute (ln ρᵢ)′ = −3(1 + wᵢ) and (ln ρᵢ)″ = −3wᵢ′. ∎
Corollary 1 (no-go). Suppose Ωᵢ ≥ 0 and wᵢ′ ≤ 0 for every component. Then q′ ≤ 0, with equality only if a single component dominates and has constant w.
This covers:
matter, radiation and Λ;
constant-w phantom fluids;
massive neutrinos, whose w falls from 1/3 to 0;
freezing quintessence (dw/dN ≤ 0).
So q′ > 0 requires one of the following:
a thawing-type component (wᵢ′ > 0);
a negative-density term, such as closed curvature;
non-gravitational energy exchange;
a departure from GR.
Corollary 2 (jerk). Using j = q(1 + 2q) − q′ [Visser 2004], Corollary 1 is equivalent to j ≥ q(1 + 2q).
Check (w₀w_a). For matter plus CPL dark energy,
q′ = (3/2) Ω_DE [w′ − 3w²(1 − Ω_DE)], with w′ = −w_a a.
At a = 1 this reduces to
q′₀ = −(3/2)(1 − Ω_m)[w_a + 3w₀² Ω_m].
Hence q′₀ > 0 ⟺ −w_a > 3w₀² Ω_m.

3. Constant-w mixtures: Laplace structure and Hankel tests
If every component has constant w, then
H²(N) = ∫ e^(−λN) dν(λ),
where ν ≥ 0 and λ = 3(1 + w) ∈ ℝ (λ < 0 for phantom components). With the tilted weights p_N(λ) ∝ e^(−λN) dν:
(ln H²)″ = Var_{p_N}(λ), and therefore q′ = −½ Var_{p_N}(λ) ≤ 0.
H² is then exponentially convex in the sense of Bernstein and Widder.
Now sample at equally spaced nodes N_k = N₀ + kΔ and write Z_k = H²(N_k). Then Z_k = ∫ x^k dμ(x), with x = e^(−λΔ) ∈ (0, ∞). So (Z_k) is a Stieltjes moment sequence, which implies, for every r:
H_r = [Z_{i+j}]{i,j=0}^r ⪰ 0 and H_r^(1) = [Z{i+j+1}]_{i,j=0}^r ⪰ 0.
The 2×2 minors reduce to discrete log-convexity, Z_k Z_{k+2} ≥ Z_{k+1}². For arbitrary nodes N₁ < N₂ < N₃, log-convexity reads
H²(N₂) ≤ H²(N₁)^θ H²(N₃)^(1−θ), with θ = (N₃ − N₂)/(N₃ − N₁).
This form also follows from Corollary 1 in its general setting.
All these conditions are invariant under Z → cZ with c > 0. Since H ∝ (D_H/r_d)⁻¹, they can be applied to D_H/r_d with no knowledge of r_d or H₀. Equivalently, ln(D_H/r_d) must be a concave function of ln(1 + z).

4. Test with DESI DR2 line-of-sight BAO
Take three bins with xⱼ = ln(1 + zⱼ) and yⱼ = ln(D_H/r_d)ⱼ. Define the statistic
T = y₂ − θy₁ − (1 − θ)y₃.
Positive mixtures require T ≥ 0. The uncertainty is
σ_T² = σ₂² + θ²σ₁² + (1 − θ)²σ₃², with σⱼ = σ(D_H)/D_H.
We use the published D_H/r_d values and errors for LRG1, LRG2, LRG3+ELG1, ELG2, QSO and Lyα (DESI DR2 Table IV, e.g. D_H/r_d = 21.863 ± 0.425 at z = 0.510 and 8.632 ± 0.101 at z = 2.330). We treat the bins as independent.

Triple (z) T σ_T T/σ_T ΛCDM expectation
0.51, 0.71, 0.93 −0.011 0.020 −0.5 +0.008
0.71, 0.93, 1.32 +0.031 0.016 +1.9 +0.010
0.93, 1.32, 1.48 +0.014 0.033 +0.4 +0.004
1.32, 1.48, 2.33 −0.008 0.042 −0.2 +0.005

The ΛCDM column is computed at Ω_m = 0.2975, from T ≈ −½ f″ Δx₁ Δx₂ with f″ = −(9/2) Ω_m(z)[1 − Ω_m(z)].
No triple violates the bound by more than 0.5σ. The expected signal, however, is itself below 1σ per triple. At z > 0.5, current BAO precision cannot resolve the curvature of ln D_H, so this test is passed but uninformative there. Adjacent triples share data points, so the rows are not independent.

5. The w₀w_a fits
Central values. The DESI+CMB+DESY5 values are Ω_m = 0.3191 ± 0.0056, w₀ = −0.752 ± 0.057 and w_a = −0.86 (+0.23/−0.20). They give q′₀ = 0.326.
Uncertainty. The same analysis reports a pivot redshift z_p = 0.31 with w_p = −0.954 ± 0.024. Because w_p is uncorrelated with w_a, it implies corr(w₀, w_a) ≈ −0.90. Propagating linearly in (w_p, w_a, Ω_m) gives:
q′₀ = 0.33 ± 0.30 (DESI+CMB+DESY5),
about 1.1σ, or P(q′₀ > 0) ≈ 0.86 under a Gaussian approximation. The other samples give:
DESI+CMB+Union3: q′₀ ≈ 0.66 ± 0.40
DESI+CMB+Pantheon+: q′₀ ≈ −0.04 ± 0.29
Both of these error bars assume the same correlation, so they are indicative only. The Pantheon+ best fit satisfies the bound.
Redshift window. For the DESY5 best fit, q′(z) changes sign at z ≈ 0.105. At the pivot redshift, q′(0.31) ≈ −0.52, so the bound holds where the data are most constraining.
Two interpretations follow:
By Corollary 1, the region q′ > 0 requires a thawing-type component, since w′ = −w_a a > 0.
The violation lives entirely where supernovae dominate the constraint. The DESY5 sample includes 194 SNe at z < 0.1 drawn from historical sources. Efstathiou reported a ~0.04 mag offset between low- and high-redshift SNe common to DES5Y and Pantheon+, and argued that correcting it brings DES5Y into agreement with Planck ΛCDM. The DES collaboration attributes most of that offset to modelling improvements and differing selection functions, and confirms its published results.
The sum rule thus sharpens the question. Slowing acceleration today is not implied by the w₀w_a preference itself. It is tied to the lowest-redshift bin and to the choice of supernova sample.

6. Discussion
The identity in Proposition 1 is elementary, but its consequences are not usually stated:
a no-go theorem for slowing acceleration that covers phantom fluids;
a test written directly on D_H/r_d, independent of r_d and H₀;
a Hankel/Stieltjes hierarchy for constant-w mixtures.
Three extensions are needed for a definitive statement:
evaluating q′(z) and the Hankel minors on the public MCMC chains, replacing the linearized estimates of §5;
low-redshift H(z) information (z < 0.3), which current BAO lacks;
treating closed curvature and interacting dark sectors explicitly, since both evade Corollary 1.

References
DESI Collaboration, M. Abdul Karim et al., DESI DR2 Results II, Phys. Rev. D (2025), arXiv:2503.14738.
DES Collaboration, T. M. C. Abbott et al., ApJL 973, L14 (2024), arXiv:2401.02929.
G. Efstathiou, Evolving dark energy or supernovae systematics?, arXiv:2408.07175.
M. Vincenzi et al., MNRAS (2025), doi:10.1093/mnras/staf943, arXiv:2501.06664.
P. Wu, J. Wang, H. Yu, EPJC 85 (2025), arXiv:2507.22575.
A. Shafieloo, V. Sahni, A. A. Starobinsky, Phys. Rev. D 80, 101301 (2009).
M. Chevallier, D. Polarski, IJMPD 10, 213 (2001); E. V. Linder, PRL 90, 091301 (2003).
R. R. Caldwell, E. V. Linder, PRL 95, 141301 (2005).
M. Visser, Class. Quantum Grav. 21, 2603 (2004).
D. V. Widder, The Laplace Transform, Princeton (1941).
J. A. Shohat, J. D. Tamarkin, The Problem of Moments, AMS (1943).


r/LLMPhysics • • 11h ago

Simulation / Code A Clifford-Seam Model of Observation

0 Upvotes

Take three things

a. Clifford Tori, for higher-dimensional bulk geometry;

b. worldvolume conformal field theory (CFT);

c. allow elastic membranes via the Clifford torus *T*² ⊂ *S*³.

This builds a topologically closed toy model that handles emergent cosmic rigidity and quantized boundary tensions without retuning.

An uncharged Clifford torus minimally embedded in the unit 3-sphere exhibits vanishing mean curvature and zero classical stretching tension. But if you thread in quantized magnetic flux N = (1/2π) (i.e. a wrapped D2-brane) ∫_{T²} F stabilizes the worldvolume against collapse (the Dirac-Born-Infeld action).

Because the induced metric remains intrinsically flat with modular parameter τ = *i*, low-energy excitations are governed by a rational 2D CFT.

The resulting Casimir vacuum generates an effective dimensionless surface tension *T̃* = *c*/24, strictly quantized as the rational fraction determined by the central charge, c.

Under stereographic projection from *S*³ to ℝ³, this quantum vacuum stress maps directly onto the Canham-Helfrich-Willmore bending functional, anchored by the topological Willmore minimum *W* = 2π².

The network completes by coupling the projected stress-energy tensor ⟨T_{μν}(T̃, W)⟩ to the semiclassical field equations, dynamically fixing the ambient S³ curvature radius R and effective cosmological constant Λ (c = S³RΛ).

  1. Geometry of the Vacuum
  • If the physical vacuum is a 3-sphere (\(S^{3}\)) partitioned by a minimal Clifford torus seam (\(\Sigma = T^2\)) carrying a two-sheeted phase field (\(\psi_+, \psi_-\)), then the ground state splits strictly into a massless harmonic mode (\(u\)) and a massive, gapped closure mode (\(v\)).
  1. Origin of Electromagnetism
  • If the massive closure mode decouples at low energies (\(E \ll \sqrt{2\lambda}\)), then the remaining massless seam phase possesses an intrinsic \(U(1)\) gauge redundancy whose long-wavelength dynamics must obey Maxwell's equations.
  1. Quantization of Electric Charge
  • If the vacuum phase field is continuous and single-valued around the non-contractible cycles of the torus seam (\(\pi_1(S^1) = \mathbb{Z}\)), then electric charge is strictly quantized in integer multiples of a fundamental unit.
  1. Origin of Matter
  • If the vacuum inverts locally via non-linear phase pairing between the two sheets, then energy is minimized by trapping twisted phase windings into stable, localized 3D solitons (Q-balls) that behave as massive particles.
  1. Origin of Spin-1/2 Fermions
  • If a vacuum soliton carries opposite unit windings \((n_+, n_-) = (1, -1)\) across the two complementary solid tori, then its topological Hopf invariant is \(H = -1\) and a \(2\pi\) spatial rotation flips the sign of its state (\(\pi_1(\text{Maps}_1(S^3, S^3)) = \mathbb{Z}_2\)), making it a spin-1/2 fermion.
  1. Origin of Gravity
  • If localized matter solitons deform the local closure gap and spectral capacity of the surrounding Clifford seam, then distant solitons experience an effective geometric attraction whose coupling strength is exponentially suppressed by the seam's closure action (\(G \propto e^{-S_{\text{cl}}}\)).
  1. Determination of Fundamental Constants
  • If the spectral zeta function of the Clifford torus seam governs both electromagnetic capacity and closure tunneling, then the fine-structure constant (\(\alpha \)) and Newton's gravitational constant (\(G\)) are fixed by the geometric spectral invariants of \(T^2 \subset S^3\) rather than free parameters.
Pillar Physical Claim Model Formula / Invariant
1. Vacuum Geometry Splitting into massless mode (u) and gapped closure mode (v) (m_v2 = 2\lambda > 0); (\mathrm{Vol}(S3) = 2\pi2 R3,) (\mathrm{Area}(\Sigma) = 2\pi2 R2)
2. Electromagnetism Low-energy (U(1)) gauge redundancy & Maxwell dynamics (S_{\mathrm{eff}} = -\frac{1}{4g_{\mathrm{eff}}2}\int) F_{\mu\nu}F{\mu\nu});) photon mass (m_\gamma = 0)
3. Charge Quantization Integer multiples of fundamental electric charge (e) (\frac{1}{2\pi}\oint_C d\theta = n \in \mathbb{Z}) from (\pi_1(S1) = \mathbb{Z})
4. Matter (Solitons) Stable Q-ball localization via paired phase inversion Mixing angle (\chi = \frac{\pi}{4}); stability (m2 - \eta \ge \frac{3g2}{16h};) binding (\Delta u < \frac{g3}{12h2})
5. Spin-1/2 (Fermions) Fermionic exchange statistics from twisted windings ((n_+, n_-) = (1, -1) \implies H = -1); (\pi_1(\mathrm{Maps}_1(S3,S3)) = \mathbb{Z}_2)
6. Gravity ((G)) Exponential suppression via closure tunneling action (S_{\mathrm{cl}} = \frac{3}{4}(A + u) \approx 103.854896); (G_{\mathrm{pred}} = \frac{\hbar c}{m_e2} e{-S\{\mathrm{cl}}}))
7. Fine-Structure Spectral capacity of the twisted Clifford seam (A = \pi + \pi2 + 4\pi3 - \frac{\gamma_E}{192\pi2} \approx 137.03599878)

r/LLMPhysics • • 4h ago

Personal Theory Physics Hypothesis

0 Upvotes

I came up with an efficiency metric called "Progress" (Pr) to measure actual goal-oriented advancement over a finite path. What do you think of this concept?

Hi everyone,

While thinking about classical mechanics and how we measure efficiency, I realized that standard work (W) doesn't always capture whether a system is making meaningful advancement toward a concrete goal. You can exert force and do mechanical work, yet if the effort isn't measured against a defined boundary, it is hard to evaluate true efficiency.

To capture this, I formulated a conceptual metric/index I call Progress (Pr) to evaluate the effectiveness of work done over a specific, finite path and time.

Here is the formula:

Pr = W / ((f)L * t)

Where:

* W = Mechanical work done (in Joules, J)

* (f)L = Finite length of the path toward the goal (in meters, m)

* t = Time taken (in seconds, s)

Why the (f) notation matters (Finite vs. Infinite):

In this notation, (f) stands for finite, distinguishing it from (i), which stands for infinite. The core principle here is that Progress (Pr) only exists and makes sense along a finite, bounded path ((f)L) with a clear goal. This finite path can either be physically bounded by nature (a strict start-to-finish distance) or it can even be sectioned off on an otherwise infinite (i) line by boundaries that you artificially define and add yourself. Without these bounds, advancement would dilute into infinity and lose measurable meaning.

SI Unit of Progress (Pr):

Derived from the formula, the unit is Joules per meter-second (J / (m * s)), which simplifies to Newtons per second (N/s) or kg m s^-3.

A Thought Experiment: Concrete Work, Zero Progress

To prove that standard mechanical work (W) and Progress (Pr) are fundamentally different, imagine performing the exact same physical action in two different environments:

The Physical Action (Performed in both cases):

* You apply a force of F = 20 N

* You move the object over a distance of L = 5 m

* Time taken is t = 10 s

The resulting mechanical work done is W = F L = 100 J

Case 1: On a Finite Path ((f)L)

Here, those 5 meters represent a bounded, finite path from start to finish ((f)L = 5 m).

Pr = 100 J / (5 m * 10 s) = 2 N/s

Result: You get concrete force (20 N), concrete distance (5 m), concrete work (100 J), and measurable Progress (Pr = 2 N/s).

Case 2: On an Infinite Line ((i))

Now, you perform the exact same action—you still exert F = 20 N, you still cover 5 m in 10 s, and you still produce W = 100 J of real mechanical work. However, you are doing this on an unbounded infinite line (i) with no defined start/finish boundaries ((i)L approaches infinity).

Because Progress (Pr) is measured relative to the total bounded goal-path (which here is infinite), the equation becomes:

Pr = 100 J / (infinity * 10 s) = 0 N/s

Result: Even though you successfully generated force (20 N), moved a real distance (5 m), and completed real mechanical work (100 J), your Progress (Pr) equals 0.

This proves that without finite boundaries, real physical effort and work still happen, yet true goal-oriented Progress does not exist.

The Core Idea:

Standard power (P = W/t) tells us how fast energy is transferred, but it doesn't account for spatial boundaries. By dividing by the finite path length (f)L, Pr acts as a heuristic to measure how cleanly work translates into actual advancement over time within a defined space.

I know this isn't a fundamental law of nature—more like an engineering/optimization index or a game-physics metric. How does this compare to existing efficiency metrics in mechanics or robotics? Would love to hear your thoughts!