r/Locksmith • • 2h ago

I am NOT a locksmith. Where to copy this kind of key?

Thumbnail
gallery
2 Upvotes

I'm selling a house and need to copy this key to put in lockbox. The seller doesn't know where it's from as it was installed from the previous owner.


r/Locksmith • • 13h ago

I am a locksmith My Kwikset Smartkey disclaimer/waiver

14 Upvotes

I decided to write up a disclaimer as a result of an after-hours emergency call where the customer from several weeks ago was locked out due to a failed smartkey knob (she had her keys but the lock failed and she is blaming us) and she wanted me to go out tonight to get her into her house after hours for free as a result. I think this covers as much in writing as I would want to put in writing, with everything else being able to take place in the resulting conversation:

SERVICE NOTICE & WAIVER Kwikset SmartKey® Rekeying Notice & Warranty Exclusion Due to the internal design and materials of Kwikset SmartKey® cylinders, these locks carry a significantly higher mechanical failure rate than traditional pin-and-tumbler locks. Before we service your SmartKey® hardware, please review and acknowledge the following terms:

Service & Key Quality: We are happy to perform standard rekeying on your existing SmartKey® locks. Using precision-cut, locksmith grade keys for daily operation and future rekeying can help reduce wear and extend the life of the cylinder.

No Warranty or Guarantee: Because of the inherent failure rate of this lock design, we cannot guarantee or warranty any rekeying service performed on SmartKey® locks for any length of time. All work is performed strictly as-is with no warranty against future lockouts or mechanical failure.

Recommended Upgrades: For long-term reliability, we recommend replacing SmartKey® cylinders with traditional pin-and-tumbler hardware, or replacing keyed SmartKey® knobs/levers with non-locking passage hardware where appropriate (such as on doors already secured by a deadbolt).

Thoughts?


r/Locksmith • • 5h ago

I am NOT a locksmith. Alter side box

3 Upvotes

Has anyone changed the lock cylinder on the side box? If so, what kind of cylinder did you get and where did you get it? We have a problem with guys stealing tools at my job and would like to keep my shit safe when on vacation or off for the weekend.


r/Locksmith • • 1h ago

I am NOT a locksmith. Cant find training for automotive keys

0 Upvotes

I recently left auto body side of the industry and have been looking to get in to automotive car keys. I'm in the Boston area. What are my best options on learning the business?


r/Locksmith • • 2h ago

I am NOT a locksmith. Is it possible to recut an auto key for a motorcycle?

1 Upvotes

Hi there,

I’ve called around to a few locksmith places and they have immediately told me that they don’t work on motorcycles right when I mentioned it. It doesn’t seem like a difficult ask but I’m unsure.

I recently purchased an older motorcycle - flat metal key. I still have the key to my first car of the same manufacturer and I thought it would be cool to recut that key to use on the bike.

Would something like that be possible?


r/Locksmith • • 3h ago

I am a locksmith I am thinking I might actually charge my customers LESS

1 Upvotes

Hear me out. I know we should value our work. I'm not talking about reducing prices in order to undercut the other guy or to win a customer over.

I've commented on a few different posts about how the cost to pick a lock and rekey it is quite often more than the cost to simply replace. I can't stand that waste.

I also have talked many times about rolling up to a big rekey job and seeing that the entire house is Kwikset Smartkey, sometimes brand new, with working keys in everything and they just want them keyed alike. I find it challenging to justify charging as much as we do for a regular rekey, to just do something that is literally made for the end user to be able to do in seconds, but they just lack the little tiny rekey tool and/or directions, and when it takes a tenth of the time of a regular rekey. Some of you (perhaps most) will argue on this point, and I get where you're coming from, but this is how I feel about it and this is why I think I'm going to charge differently than my current employer and most of our competition.

So what I'm going to do is, a regular rekey is $25, a Kwikset Smartkey rekey is going to be $15. If without the existing key, regular price. Basically if it has to come off the door, that's where the regular price comes in.

For a regular pin-and-tumbler lock, if I have to pick it in order to access the lock, then I will probably charge it as a bundle. So where we charge $35 to pick and $25 to rekey, I'd probably do $40 for both. Maybe more, we'll see. But the idea is to make it so that picking and rekeying isn't cost prohibitive to the point that replacement is the best option. I hate waste and I hate forcing the customer into that kind of decision.

What do you guys think?


r/Locksmith • • 16h ago

I am NOT a locksmith. Fiction research - how to lock someone out from inside a secure room

6 Upvotes

I'm a published novelist currently working on a Young Adult spy novel. My heroes have been escorted into a room secured with a keypad lock. Through trickery and chicanery, the heroes have gotten all the bad guys out of the room while the heroes remain inside. Without doing some kind of computer hacking scene, what could my heroes do to prevent the bad guys from re-entering, at least for a few minutes.


r/Locksmith • • 19h ago

I am NOT a locksmith. I think I got scammed UK.

Post image
4 Upvotes

My mum recently replaced the old Winkhaus XR6 lock with an overpriced ASTRA lock. She bought the new lock impulsively without researching it at all. She believed people were trying to lock pick into our house.


r/Locksmith • • 23h ago

I am NOT a locksmith. Help with burgled lock

Thumbnail
gallery
4 Upvotes

I was broken into last week. I have an aluminium door which had a Versa lock in it which I’m told is hardened and should have snapped so no one can get in. I was also told these are almost impossible to break into without a special tool that only licensed people can get and apparently my lock was installed wrong which is why it broke where it did. It happened at night, and woke none of us.

Can anyone please tell me if this is true and if so what can be done to prevent this in future. I’ve got an Abloy europrotec2 lock coming for in there but is there any reinforcing plates I can buy that I can put over?

Thank you


r/Locksmith • • 19h ago

I am NOT a locksmith. Resume for corporate positions

2 Upvotes

I’m helping my friend get his resume together. He wants to transition from his local mom/pop locksmith job to a corporate one. Does anyone have any suggestions/advice re: what to highlight or language and keywords they look fo,, or would anyone with a comparable position that was recently hired be willing to share their resume with me? I want to get his materials catered to the best position he can get but I know very little about the industry. Thanks very much!


r/Locksmith • • 1d ago

I am a locksmith Just came across a wild one.

Post image
15 Upvotes

So here in OZ there's a commercial mortice lock with a mechanical digital keypad above an oval cylinder. Very expensive. Very fancy. Custom parts. I get the call. The boss asks me to look at the back door as it's missing the lock. He thinks someone ripped it off. I look in the hole and see the fixing plate (pictured) with no cylinder. Direct access to the spindle drive. No screws in the plate. No damage. Whoever installed it forgot to put the lock in. If it had been pulled out, there would have been two screws captive in the plate or damage from them being pulled out (or they forgot the screws completely and the lock fell out which is just as bad). This shop has had a fully exposed rear door since it was built. I can see the Locksmiths name on the key. I'll be sure to give them some shit next time I see them.


r/Locksmith • • 1d ago

I am NOT a locksmith. Inherited a property with this safe

Thumbnail gallery
9 Upvotes

Found this under the stairs in an inherited property, still got keys and the safe seems to work fine.

I was going to keep it to use as a safe but wondered if it might be worth something?


r/Locksmith • • 23h ago

I am a locksmith Techs avail

3 Upvotes

I was working as a locksmith with 5 of my friends in dc, a problem happened with our manager we found out he is scamming all of us and giving us bread crumbs, we are all looking right now for a company to work for that is reliable, please if anybody can help we have our own office and dispatcher


r/Locksmith • • 1d ago

I am NOT a locksmith. Help with cam cabinet lock

Thumbnail
gallery
4 Upvotes

I’m at my wit’s end. I am by NO means a professional, just a guy who bought a gun cabinet off of Facebook marketplace and is trying to reattach the cam locks. I’ve got the door lock all set, but this bottom lock is killing me. I’ve got the half turn stop washer in, but no matter how tight I turn the screw or the nut, it has enough room to wiggle over the alignment pin. Do I need another half turn stop washer to stack it on top? Help!


r/Locksmith • • 23h ago

I am NOT a locksmith. TSS lock help

2 Upvotes

Hi all, I need some help with my TSS Euro lock.

The issue: I can insert the key into one side and it works fine.

When I do the other it won’t turn, like it’s not the right key.

Does anyone know what the issue could be?
How do I fix this issue?


r/Locksmith • • 21h ago

I am NOT a locksmith. Need help selecting a door lock that would allow for access through 2 sets of keys and the ability to disable one.

1 Upvotes

I don't know if such a thing exists but long story short our condo association wants there to be a copy of each unit's key on file. My wife is very much not ok with this as we don't have a super, and the keys would just be sitting in a box for use by contractors and frankly I don't want people to enter my home without permission. As a compromise I was thinking that if there's a setup where I have the master set that always works and there's another set of keys that can be enabled or disabled at will, that would give me peace of mind that no one is going to enter our home without forewarning. So does such a thing exist? If it does, does a version that doesn't use a tiny computer exist? I'd prefer to keep things as hardware based as possible tbh rather than fighting with another app.

Thanks in advance!


r/Locksmith • • 22h ago

I am NOT a locksmith. Gun safe lock replacement

Thumbnail reddit.com
1 Upvotes

r/Locksmith • • 1d ago

I am NOT a locksmith. Key Sticking In Door

4 Upvotes

When I try to insert or remove my key from the door it is really hard to get the final tooth in. Is there some way I can fix this or do I just need to replace the lock? I’ve also noticed this getting worse. Video attached.

I know it’s still usable but I’d really like to fix it since (maybe it’s just the weather or i’m going crazy) I feel like it’s been getting worse


r/Locksmith • • 1d ago

I am NOT a locksmith. Aspiring Apprentice in Reno/Sparks, NV – Looking for a brick-and-mortar shop

4 Upvotes

Hi everyone, I live in Reno and am dropping off resumes at local shops soon, so I wanted to check if any Northern Nevada shop owners are here. I'm seeking a part-time or full-time Shop Tech / Locksmith Apprenticeship.

I practice at home with my own lock kits and training locks and handle routine repairs with hand and power tools—though I know I have everything to learn from scratch. Here is how I can be useful at the counter right away:

*Small-parts organization: 8 years in electronics inventory control (2018–2026) handling physical counts and WMS/Oracle tracking.

*Counter & cash trust: 15+ years in walk-in customer service, invoicing, retail management, and daily cash drawers/bank deposits.

*Permit ready: Clean record, valid NV license, and ready for Washoe County Sheriff Locksmith Work Permit fingerprinting upon hire.

DM me if you run a local shop or have a Reno/Sparks recommendation!


r/Locksmith • • 1d ago

I am a locksmith Qualified Locksmith (AUS) looking for auto training

6 Upvotes

I haven’t done auto programming since the simple AD100/RW4 days. However, I’m turning down too many auto jobs, since two other locksmiths left town.

  1. Apart from the LSC training (any thoughts on that would also be appreciated), is there anywhere to go to learn how not to screw up? It looks like the AD smart pro website has helpful info, but what about learning to use other tools (ie: Key Tool Max etc) -Are there courses to learn non-AD gear in Australia?
  2. Any thoughts on asking a wreckers to practice making keys/remotes for their cars?
  3. Are there any publications describing mistakes to avoid, or pro tips? You guys are constantly saying how easy it is to make mistakes if you don’t know what you’re doing…. So surely someone’s written some stuff down (even if its just a notebook for themselves). —Or, are there any good AUS forums, which aren’t just full of spammers?

Oi, thanks for your time.


r/Locksmith • • 1d ago

I am NOT a locksmith. Primus Account Question

4 Upvotes

I work for a management company that recently acquired a new property. The entire property is Schlage Primus IC core and has been serviced by a local locksmith company. I want to move to our normal locksmith and reached out to Schlage to have them authorized for the buildings account. They informed me that the local locksmith and NOT the owner of the building is actually the account holder and the only way to bring a new locksmith in would be to create a new account and have the entire property rekeyed. I have never seen a locksmith own the keying system and not the actual property owner. Are there any options other than a whole building rekey? I should also add that the reason the switch was first looked into is the lack of response/service from the current smith.


r/Locksmith • • 2d ago

I am a locksmith Anyone familiar with this rack and pinion door closer?

Thumbnail
gallery
7 Upvotes

I


r/Locksmith • • 1d ago

I am NOT a locksmith. Diy door lock

2 Upvotes

Hello everybody, I was just wondering if any of you know how to make a diy door lock?

I've tried the fork one, but it doesn't quite work on my door.

Thank you very much!


r/Locksmith • • 2d ago

I am NOT a locksmith. How to secure a center seam metal door?

4 Upvotes

I have 4 doors, none of them have deadbolts in them. They are all hollow metal doors and have the seam right down the middle of the edge. It does not seem like it would be a good idea to attempt to drill into them for a deadbolt, any suggestions or alternatives?