r/MP5 • u/luvinjuggin212 • 4h ago
Media In Honor of GTA dropping tonight…
Finally found steel mags for the 53, cannot wait.
AP5-P w/ SS (mostly 3-d printed parts aside from a few internals and flat trigger)
H&K SP5
MKE AP53
r/MP5 • u/luvinjuggin212 • 4h ago
Finally found steel mags for the 53, cannot wait.
AP5-P w/ SS (mostly 3-d printed parts aside from a few internals and flat trigger)
H&K SP5
MKE AP53
r/MP5 • u/TheTaxStampCollectr • 12h ago
So far both have cycled fine and loaded pretty easily.
r/MP5 • u/DecentCheddar • 14h ago
Hopefully the replacement is good!
r/MP5 • u/YourGunSucksA55 • 9h ago
Had an SP5 with out of spec trilugs so I replaced it with a far cheaper POF and I couldn’t be happier. Sub $1500 gets you the gun, an AC unity stock, 10 MKE mags, 2 POF mags, and the other accessories the gun comes with. Had an issue with the tri lug not accepting my sub9 but silver rhino called me personally to help fix the problem which turned out to be a thick layer of paint on the lugs. Worked the suppressor on and off to break up some of the paint and it both fits like a glove and is concentric. I haven’t had the chance to shoot it yet but first impression is that id rather have 2 of these than one HK 🤷♂️ haven’t taken photos of the internals but they look quite good and components are individually serialized. Fits right in with my zpap85s.
r/MP5 • u/Puba1228 • 4h ago
Hey everyone . As we know , we are finding issues with the magazines . I bought two and one of them has an obvious manufacturer defect that does not allow the magazine to seat in the gun .
I have attached to photos . One on the left is HK original straight mag while picture on the right is HKP straight mag .
Makes you wonder if there is any kind of quality control…
r/MP5 • u/SituationSouth5955 • 2h ago
I was able to load both HKP 30 round straight mags to a full 30 and they seat. Are they broken?!
Seriously though, a few first impressions. The mag bodies seem solid, maybe not quite as quality material/finish as HK but still solid with nice welds.
The followers and base plates seem less well made… especially compared to real HK mags.
The springs are stiff. Getting a full 30 in wasn’t easy and the last 3 rounds were much more difficult. Maybe they’ll break in.
The movement of the followers through the mag body isn’t the smoothest when pushing them my hand. I did take both apart and inspected and notice the grittiness the most when reassembling. Feels more gritty than catching though. Maybe they’ll break in.
Both mags seated well with little play.
Both ran with no issues using 124gr round nose.
Overall not bad for the price point. I’d roll the dice again.
r/MP5 • u/poor_financials • 24m ago
Has anyone run into this issue with the hk marked stocks?If anyone has a solution please let me know
r/MP5 • u/Katana416 • 2h ago
Looking for an alternative to the Nas-K. I know a lot of people have had great luck, but mine has a huge amount of slop and when it’s all the way down it actively prevents the charging handle from returning to battery.
r/MP5 • u/ZelenskysCokeBag • 10h ago
Don’t bother straight trash won’t load past 5 rounds. Thought the follower could be lightly sanded no still getting bound up. Did they even test a single mag?
r/MP5 • u/Altruistic_Sink1817 • 6h ago
Going to frt my ap5 and noticed it looked like the 30 spot is covered. I took an xacto knife and dug around hoping maybe I could pop the filler piece out. Anyone confirmed if the 30 is under the blocked filler?
r/MP5 • u/Alternative-Feed3613 • 7h ago
I had a AR9 and sold it and then I bought a GHM9 and sold it because they just didn’t scratch that itch. I shot a friends Zenith and that felt right. I’d like to get a HK but I just can’t swing it so I’m thinking about getting an AP5. What are your thoughts?
r/MP5 • u/Go_GO_GADGET_GUN • 1d ago
Also Hk mags for 75
r/MP5 • u/five_frogs • 1d ago
Feel like a fraud with a century arms in here but whatever. I love it, it’s fun, it looks cool. I couldn’t justify the extra cost for the brand name
Pic 1: current state. Added a tri lug to bring in the suppressor closer and shortened my suppressor as well. Full length in pic 2
Pic 2: off the shelf compared to monolithic rail and dead air suppressor added.
r/MP5 • u/Fun_Initiative729 • 1d ago
PTR 9RS
YHM R9 (temporary, CAT SC-S en-route)
Just picked her up from my FFL today. Looking to change front hand guard to longer SD setup shrouding the new suppressor and provide some mounting points along with [ ]… appreciate any suggestions or insights.
Cheers
r/MP5 • u/Only-Letterhead-9685 • 1d ago
What’s up guys, I’m new to the FRT world and looking for some feedback from anyone running one in their MAC-5.
I’m planning on picking up the Rare Breed FRT since there’s still no word on when the ASD version is dropping.
Before installing it, would y’all recommend replacing the factory extractor, ejector lever, springs, and entire mag catch assembly with genuine HK parts, or should I stick with the stock components? I’ve seen a few posts about people having reliability issues with FRT setups, so I’m trying to figure out if it’s worth upgrading those parts beforehand.
I’m also running a YHM R9 suppressor and would appreciate some recommendations on what ammo runs reliably with the FRT, especially subsonics, and which brands or loads I should avoid.
I’d appreciate any firsthand experience or advice from those running a similar setup. Thanks in advance!
r/MP5 • u/Shackonthehill403 • 1d ago
My 30rd Straight HK Parts magazine arrived yesterday, I tried to load the mag to test the function and I could not load more than 9 or so rounds before follower got hung up on the mag wall. I tried a few times to push down on the follower and it would just continue to scrap the inside of the magazine. Even tried a few drops of gun oil, no luck. Hope you guys have better luck!
r/MP5 • u/Altruistic_Sink1817 • 6h ago
Going to frt my ap5 and noticed it looked like the 30 spot is covered. I took an xacto knife and dug around hoping maybe I could pop the filler piece out. Anyone confirmed if the 30 is under the blocked filler?
Title. Looked all over. Can't find anything good in stock. Want a quality product from a reputable company.
r/MP5 • u/wakanda_banana • 1d ago
Those with a choate stock, does yours look the same when it’s locked in place?
Mine has a tiny amount of play but I want to make sure this isn’t supposed to sit flush.
r/MP5 • u/Mee-n-Low • 1d ago
Form 1 approved and the AC Unity A2 stock went on right away. Really happy with how this build has turned out, it's been a fun experience getting familiar with this platform and I am excited to keep running with it for the foreseeable future.
r/MP5 • u/Imaginary_Regular_62 • 1d ago
Anybody have Intel on why authentic HK magazine pricing has gone up substantially? Not too long ago I was picking them up for $69 from RTG or GunMag Warehouse. Now they are about $90, what's the deal? It doesn't seem to correlate with general inflation trends.
r/MP5 • u/Piston_Paul • 1d ago
Shadow Strategic mount for the KAC handguard allows co-witness & surplus Reflex Acog w/HK Claw Mount for cleaner old school look on the K