r/MechanicalEngineering • u/mehdi-33 • 16h ago
r/MechanicalEngineering • u/AutoModerator • Sep 01 '26
Quarterly /r/MechanicalEngineering Career/Salary Megathread
Are you looking for feedback or information on your salary or career? Then you've come to the right thread. If your questions are anything like the following example questions, then ask away:
- Am I underpaid?
- Is my offered salary market value?
- How do I break into [industry]?
- Will I be pigeonholed if I work as a [job title]?
- What graduate degree should I pursue?
Message the mods for suggestions, comments, or feedback.
r/MechanicalEngineering
•
u/yaoz889
•
Mar 23 '26
2026 US Mechanical Engineer Survey Results
I would like to thank you everyone for participating in the annual 2026 ME Salary survey. Total respondents was a little over 600, so less than last year, but about 589 US responses.
Background:
Here are the main results. It took about 2 hours to "clean" the data manually. Afterwards, I basically used Gemini to create the graphs + tables, since last time it literally took me about 7 hours to do everything manually on Excel last time and there were still questions. The key points and takeaways from the data is a combination of AI and editing the information to be more readable (still took 4 hours). In addition, I wouldn't worry about math too much, since Gemini basically just used python code to decipher the edited CSV file.
Industry:
| Industry | Number of Respondents |
|---|---|
| Manufacturing | 175 (29.7%) |
| Aerospace/Defense | 173 (29.4%) |
| Technology (FANG, AI, Robotics, etc.) | 54 (9.2%) |
| MEP (HVAC, Construction, etc.) | 38 (6.5%) |
| Utilities (Power, Renewables, etc.) | 35 (5.9%) |
| Pharmaceutical & Medical Devices | 31 (5.3%) |
| Oil and Gas | 28 (4.8%) |
| Consumer Goods | 15 (2.5%) |
| Government | 11 (1.9%) |
- There were some other industries like nuclear, logistics, and etc. but the few data points aren't included in the table for brevity. The data was included in the total set though
- A majority of the mechanical engineers trends will use the Aerospace/Defense and Manufacturing data since there is the most data that is available
Salary and Year of Experience:
*Note: Total Compensation/Salary = Base Salary + Bonus + RSU + Base Salary * 401k Match
If you want to look at one graph and table to explain the progression track here it is:

| YOE Range | Median Base (Unadj) | Median Total (Unadj) | Median Base (COL Adj) | Median Total (COL Adj) | Count |
|---|---|---|---|---|---|
| 0-1 Year | $87,000 | $96,036 | $81,699 | $87,368 | 43 |
| 2 Years | $84,000 | $91,046 | $84,615 | $90,909 | 71 |
| 3 Years | $94,550 | $105,965 | $94,082 | $102,289 | 62 |
| 4-5 Years | $104,000 | $119,770 | $94,881 | $107,762 | 116 |
| 6-8 Years | $120,000 | $136,800 | $112,500 | $127,911 | 119 |
| 9-12 Years | $125,500 | $146,985 | $123,444 | $142,555 | 96 |
| 13-20 Years | $157,290 | $181,840 | $144,254 | $171,731 | 64 |
| 20+ Years | $196,500 | $211,426 | $163,399 | $191,042 | 15 |
Key Takeaways:
- The "Benefit Gap": The space between the solid lines (Total Compensation) and the dashed lines (Base Salary) represents the added value from annual bonuses and employer 401k matching. For a mid-career engineer (6-8 years), this extra value is roughly $16,800 on average.
- Late Career Leverage: As engineers gain seniority (13+ years), the gap between base salary and total compensation grows significantly, suggesting that bonuses and incentive programs make up a larger portion of the package for senior-level and leadership roles.
- Purchasing Power: The COL Adjusted lines (Orange) consistently track below the un-adjusted lines (Blue), highlighting that high-paying mechanical engineering roles are frequently located in markets where the dollar doesn't stretch as far as the national average.
Education:

- Majority of the respondents are at max a bachelor degree holder. However, there is still a significant number of master's students
Now about the age old question: does having a Master's degree lead to higher future salary?
Short Answer: In general, the answer is yes if there is a chance to specialize. It is explained in the table below:
| Industry | Career Stage | Education | Median Total (Unadj) | Median Total (COL Adj) | Count |
|---|---|---|---|---|---|
| Aerospace & Defense | 0-3 Years | Bachelors | $96,664 | $95,201 | 44 |
| Masters | $116,600 | $108,316 | 15 | ||
| 4-7 Years | Bachelors | $125,410 | $110,659 | 39 | |
| Masters | $173,000 | $148,432 | 9 | ||
| 8-15 Years | Bachelors | $161,750 | $140,202 | 33 | |
| Masters | $154,905 | $149,658 | 16 | ||
| 15+ Years | Bachelors | $207,080 | $187,505 | 7 | |
| Masters | $211,426 | $207,872 | 5 | ||
| Manufacturing | 0-3 Years | Bachelors | $88,220 | $93,452 | 52 |
| Masters | $93,740 | $91,850 | 6 | ||
| 4-7 Years | Bachelors | $108,992 | $106,701 | 45 | |
| Masters | $129,800 | $128,407 | 12 | ||
| 8-15 Years | Bachelors | $135,425 | $142,440 | 44 | |
| Masters | $136,298 | $129,984 | 8 | ||
| 15+ Years | Bachelors | $182,650 | $187,127 | 5 |
Now you can see that for manufacturing, the benefits is not as prominent, while it is evident in aerospace. This makes sense, since Aerospace have very high specialization salary, for instance: hypersonic or eVtol which pays a ton for total compensation based on years of experience.
- Answer: if your company pays for your masters, do it, but it doesn't seem that beneficial near the end of your career.
Internships & Coops:

Key Insights:
- The "Experienced" Majority: A combined 85% of respondents completed at least one internship or co-op. This underscores how critical early-career work experience has become for landing a full-time role in mechanical engineering.
- Co-op Advantage: The 20% of respondents with "3+ Internships" often represent those in formal co-op programs (where students rotate between school and work over several years). These candidates typically command higher starting salaries shown in the table below:
| Industry | 0-1 Internship | 2+ Internships | New Grad Premium |
|---|---|---|---|
| Aerospace & Defense | $82,000 | $91,500 | +$9,500 |
| Manufacturing | $74,000 | $82,000 | +$8,000 |
| MedTech | $80,500 | $89,000 | +$8,500 |
Certifications:
Here is the graph of a major certifications from the survey:

We always see a question on whether certifications are worth it:
Aerospace & Defense: Certification vs. Total Compensation
| Experience | Education | Has Cert? | Median Unadj. Total | Median Adj. Total | Count |
|---|---|---|---|---|---|
| 0-3 Years | Bachelors | No | $97,900 | $95,426 | 41 |
| Yes | $95,040 | $64,653 | 3 | ||
| 4-7 Years | Bachelors | No | $125,315 | $106,672 | 36 |
| Yes | $128,580 | $138,258 | 3 | ||
| 8-15 Years | Bachelors | No | $159,660 | $139,839 | 31 |
| Yes | $280,425 | $177,895 | 2 | ||
| Masters | No | $151,410 | $142,043 | 13 | |
| Yes | $209,658 | $216,142 | 3 |
Manufacturing: Certification vs. Total Compensation
| Experience | Education | Has Cert? | Median Unadj. Total | Median Adj. Total | Count |
|---|---|---|---|---|---|
| 0-3 Years | Bachelors | No | $88,020 | $91,944 | 43 |
| Yes | $90,450 | $99,746 | 9 | ||
| 4-7 Years | Bachelors | No | $108,805 | $106,615 | 36 |
| Yes | $108,992 | $106,701 | 9 | ||
| 8-15 Years | Bachelors | No | $135,000 | $136,541 | 31 |
| Yes | $136,000 | $151,111 | 13 | ||
| Masters | No | $152,212 | $122,728 | 6 | |
| Yes | $134,815 | $141,636 | 2 |
Key Findings:
- High-Experience Premium in Aerospace: The most dramatic impact of certification appears in the mid-to-late career in Aerospace & Defense (8–15 years). Engineers with a Bachelors and a certification earn a median total compensation significantly higher than those without. Even among Masters holders in this range, certified engineers have a median total comp of $209k vs $151k for non-certified.
- Manufacturing Stability: In the Manufacturing industry, certifications (often Six Sigma or FE/PE) lead to a very modest increase in un-adjusted base pay, but a more noticeable improvement in COL-adjusted pay. This suggests that certified engineers in Manufacturing may have more flexibility to find high-paying roles in lower-cost-of-living areas.
- The "Entry-Level Paradox": For junior engineers (0–3 years), having a certification (likely the FE) does not immediately result in a salary premium. In fact, in Aerospace, the un-adjusted median for those with certifications was slightly lower, possibly because those engineers are still in entry-level rotation programs where pay is standardized regardless of credentials.
- Masters + Certification: For those who already have a Masters, adding a certification provides a significant late-career boost (as seen in the 8–15 year group in Aerospace).
Answer: Certification can be worth it for select industries. PE is known for civil to open doors and increase pay.
Job Titles:

| Job Role Category | Number of Respondents | Percentage |
|---|---|---|
| Mechanical Engineer (General) | 229 | 38.9% |
| Design Engineer | 97 | 16.5% |
| Project & Systems Engineer | 59 | 10.0% |
| Management & Leadership | 55 | 9.3% |
| Manufacturing & Process Engineer | 54 | 9.2% |
| Specialized (Thermal, Stress, R&D) | 34 | 5.8% |
| Other / Misc | 61 | 10.4% |
Key Insights:
- General vs. Specialized: Nearly 40% of respondents identify with the broad title of "Mechanical Engineer," which often includes generalists or those in mid-level positions.
- The Design Dominance: Design Engineering is the second largest single group, reflecting the high demand for CAD-based design and product development across aerospace, tech, and manufacturing industries.
- Transition to Leadership: About 9% of respondents hold titles in Management & Leadership (Manager, Director, VP), which led to a higher salary
- Project and Systems focus: 1 in 10 engineers focuses on Project or Systems Engineering, highlighting the importance of multidisciplinary coordination and technical management in modern engineering projects.
- The Specialty Niche: The "Specialized" category includes highly technical roles like Thermal Analysis, FEA, Simulation, and Research & Development, which often require higher educational levels or deep domain expertise.
Salary Grade vs. Salary:
| Grade Level | Industry | Median Annual Salary | Typical Experience (YOE) | Sample Count |
|---|---|---|---|---|
| Level 1 (Entry) | Aerospace & Defense | $88,400 | 1.0 year | 39 |
| Manufacturing | $80,250 | 2.0 years | 39 | |
| Level 2 (Mid) | Aerospace & Defense | $102,273 | 3.8 years | 48 |
| Manufacturing | $95,000 | 5.0 years | 71 | |
| Level 3 (Senior) | Aerospace & Defense | $130,000 | 8.0 years | 57 |
| Manufacturing | $119,600 | 9.0 years | 50 | |
| Level 4 (Lead/Manager) | Aerospace & Defense | $170,500 | 11.0 years | 22 |
| Manufacturing | $136,000 | 11.0 years | 11 | |
| Level 5+ (Principal/Director) | Aerospace & Defense | $206,000 | 20.0 years | 9 |
| Manufacturing | $136,500 | 14.0 years | 4 |
- Efficiency of Experience: In Aerospace, engineers tend to reach Level 2 and Level 3 roughly 1–1.2 years faster than those in Manufacturing, while also earning more.
- The Level 4 Ceiling: In Manufacturing, the salary jump from Grade 3 to Grade 4 is roughly $16k, whereas in Aerospace, that same promotion yields a massive $40k jump in median base salary.
Which Industry Pays the Most?

Major Caveat: at 16+ YOE, the data points are only a couple, which skews the data upward.
Based on the comprehensive US survey data, the Technology (FANG, Robotics, AI, Consumer Electronics) industry emerges as the highest-paying sector for mechanical engineers when considering total compensation (Base Salary + Annual Bonus + 401k Match).
Tech Compensation Package:
| Years of Experience | Avg. Total Comp (Unadjusted) | Avg. Total Comp (Adjusted for COL) | Number of Respondents |
|---|---|---|---|
| 0-2 YOE (Entry) | $117,316 | $100,292 | 7 |
| 3-5 YOE (Junior) | $180,854 | $138,040 | 17 |
| 6-10 YOE (Mid-Level) | $182,773 | $134,543 | 14 |
| 11-15 YOE (Senior) | $259,993 | $220,256 | 11 |
| 16+ YOE (Principal) | $244,775 | $177,043 | 5 |
The Oil and Gas industry stands out as the second most lucrative sectors for mechanical engineers, particularly as they reach senior and principal levels. While Tech offers the highest overall unadjusted compensation, Oil and Gas actually offers the highest Cost of Living (COL) Adjusted compensation, meaning your real purchasing power in this industry is the highest among all major sectors.
| Years of Experience | Avg. Total Comp (Unadjusted) | Avg. Total Comp (COL Adjusted) | Number of Respondents |
|---|---|---|---|
| 0-2 YOE | $95,864 | $83,178 | 5 |
| 3-5 YOE | $117,289 | $111,155 | 7 |
| 6-10 YOE | $138,959 | $139,773 | 7 |
| 11-15 YOE | $204,097 | $219,757 | 6 |
| 16+ YOE | $408,040 | $399,276 | 3 |
Overtime Pay:

Industry Trends: Overtime pay is slightly more common in Manufacturing (where production deadlines are rigid) and Consulting/EPC (where hours are billable to clients) compared to R&D or Aerospace.
Work Hours:

| Work Hours Category | Number of Respondents | Percentage |
|---|---|---|
| Exactly 40 Hours | 337 | 57.2% |
| 41-45 Hours | 146 | 24.8% |
| 46-50 Hours | 49 | 8.3% |
| <40 Hours | 50 | 8.5% |
| >50 Hours | 7 | 1.2% |
Key Observations:
- The "40-Hour" Standard: Over half of the engineers surveyed manage to stick to a strict 40-hour week, which is a positive sign for work-life balance in the profession.
- Moderate Overtime: Roughly a quarter of engineers work an extra 1 to 5 hours a week (41-45 hours total), often representing "straight time" or expected professional dedication without formal overtime pay.
- The High-Hours Exception: Only a small fraction (under 10%) report working more than 45 hours consistently. This is significantly lower than in fields like investment banking or high-tier management consulting, suggesting a relatively stable lifestyle for most US mechanical engineers.
- Flexibility: About 8.5% of respondents work fewer than 40 hours, which often aligns with part-time roles, senior consultants, or companies with flexible "9/80" schedules where some weeks are shorter.
401k Summary:

| Match Rate Range | Count of Responses | Percentage |
|---|---|---|
| 4% - 5% | 211 | 35.8% |
| 1% - 3% | 125 | 21.2% |
| 6% - 7% | 120 | 20.4% |
| 8% - 10% | 65 | 11.0% |
| No Match (0%) | 56 | 9.5% |
| > 10% / Other | 12 | 2.0% |
Key Takeaways:
- The Industry Standard: A 4–5% match is clearly the most common benefit, covering over a third of the surveyed population.
- High-Tier Benefits: Roughly 13% of engineers receive a match of 8% or higher, which often indicates highly competitive benefit packages in specialized industries.
- Retirement Security: The low percentage of "No Match" responses (under 10%) highlights that retirement contributions are a standard and expected part of total compensation in the US mechanical engineering market.
Remote Work Distribution:

| Remote Category | Number of Respondents | Percentage |
|---|---|---|
| Fully In-Person (0%) | 248 | 42.1% |
| Mostly In-Person (1-39%) | 163 | 27.7% |
| Hybrid (40-60%) | 118 | 20.0% |
| Fully Remote (100%) | 38 | 6.5% |
| Mostly Remote (61-99%) | 22 | 3.7% |
Key Insights:
- The "Hands-On" Requirement: Over 40% of mechanical engineers are required to be in the office or on-site 100% of the time. This is significantly higher than other engineering fields like Software or Data Science.
- The Hybrid Standard: Roughly 48% of the workforce has some form of hybrid flexibility (ranging from 1% to 60% remote). Many companies now allow 1–2 days of remote work for documentation, CAD modeling, or administrative tasks.
- Fully Remote is Rare: Only 6.5% of mechanical engineers work fully remotely. These roles are typically in specialized areas like pure Simulation/FEA, Project Management, or Sales Engineering where physical hardware access is not required daily.
- The Hybrid Middle Ground: The 40–60% range (often 2–3 days per week) is a common "sweet spot" for engineering firms trying to balance teamwork/lab time with employee flexibility.
Paid Time Off (Days):
*Note: one issue is many jobs had unlimited sick time, which I just added 10 days. Next time I will edit the form to separate the sick days so it makes more sense.

| PTO Category (Includes Sick Days) | Number of Respondents | Percentage |
|---|---|---|
| 0–10 days | 30 | 5.2% |
| 11–15 days | 112 | 19.5% |
| 16–20 days | 160 | 27.9% |
| 21–25 days | 100 | 17.4% |
| 26–30 days | 61 | 10.6% |
| 31+ days | 32 | 5.6% |
| Unlimited | 78 | 13.6% |
Key Insights:
- The " 3 - 5 Week" Benchmark: The majority of mechanical engineers (over 45%) receive between 16 and 25 days of PTO.
- The Rise of Unlimited PTO: About 13.6% of respondents now have "Unlimited" PTO.
- Generous Packages: Roughly 16% of engineers receive more than 30 days of PTO, which is often a hallmark of high-seniority roles, government/defense positions, or companies that reward long tenure.
- The Lean End: Only about 5% of respondents are on the low end with 10 days or fewer, suggesting that a minimum of two weeks of PTO is a standard baseline for the industry.
Now some of you might have questions regarding years of experience and PTO:

Average PTO by Experience (Fixed PTO)
| Experience Level | Average PTO Days (per year) | Typical Range (25th-75th Percentile) |
|---|---|---|
| 0–2 Years | 16.9 | 10–15 days |
| 3–5 Years | 19.6 | 15–20 days |
| 6–10 Years | 21.1 | 20 days |
| 11–15 Years | 24.5 | 20–25 days |
| 16+ Years | 26.5 | 25–30+ days |
Analysis of the Trend:
- The "Standard Jump": Many engineers start with 15 days (3 weeks) and see their first significant "tenure bump" to 20 days (4 weeks) after reaching the 5-year mark.
- Senior Perks: By the time an engineer hits 15+ years of experience, a 5-week (25-day) or 6-week (30-day) PTO package becomes the new baseline.
- Job Hopping Factor: The data suggests that while tenure within a single company increases PTO, "job hopping" every 3–5 years also allows engineers to negotiate higher starting PTO tiers at their new employers, effectively "skipping" the long wait for tenure-based increases.
Health Insurance:

| Satisfaction Level | Number of Respondents | Percentage |
|---|---|---|
| Free / Excellent | 38 | 6.5% |
| Good (Low Premium/High Coverage) | 211 | 36.3% |
| Average | 288 | 49.5% |
| Poor (High Premium/Low Coverage) | 41 | 7.0% |
| Other / Misc | 4 | 0.7% |
Key Insights:
- The "Standard" Plan: Almost 50% of engineers describe their insurance as "Average," highlighting that standard employer-sponsored health insurance is common but not particularly outstanding in terms of premiums or coverage levels.
- Competitive Benefits: Over 42% of respondents fall into the "Good" or "Free" categories. The 6.5% who receive "Free/Excellent" coverage likely work for highly competitive tech firms, established defense contractors, or companies that use premium benefits as a retention tool.
- Under-Served Minority: Roughly 7% of the engineering workforce feels their health insurance is "Poor," usually characterized by high out-of-pocket costs and high monthly premiums.
Biggest Cons for Mechanical Engineering:

| Category | Typical Concerns Mentioned |
|---|---|
| Workload & Hours (112 mentions) | High pressure, tight deadlines, long hours, and poor work-life balance. Many mentioned "start-up energy" even in established firms. |
| Salary & Compensation (73 mentions) | Low raises (2–3%), "salary plateauing" early in the career, and the absence of stock options or significant bonuses compared to tech. |
| Remote Work Limits (47 mentions) | Frequent requirements to be in the office or on the manufacturing floor with "no remote option" or "No WFH" (Work From Home) policies. |
| Career Growth (35 mentions) | Concerns about "pigeon-holing," slow internal promotion tracks, and becoming "stagnant" in one technical area. |
| Red Tape & Bureaucracy (26 mentions) | Excessive paperwork, slow corporate processes, "red tape," and inefficient management systems. |
Biggest Pros for Mechanical Engineering:

| Category | Typical Benefits Mentioned |
|---|---|
| Salary & Comp (86 mentions) | Competitive base pay, annual bonuses, and strong 401k matching programs. |
| Work-Life Balance (75 mentions) | Flexible schedules, reasonable working hours (standard 40h), and generous PTO. |
| Culture & People (70 mentions) | Great teammates, supportive management, and a collaborative "team-first" environment. |
| Interesting Work (65 mentions) | Designing "cool" products, working on challenging technical problems, and having a clear mission. |
| Job Stability (28 mentions) | Long-term security, consistent demand for the role, and the stability of established firms. |
| Remote/Hybrid (27 mentions) | The ability to work from home part-time or have flexible geographic location. |
Direct Insights from Engineers:
- On Work Quality: "The actual work we do is really interesting, fun, and rewarding. Getting to see a design go from CAD to a physical product is the best part."
- On Culture: "Great coworkers and a team environment where people actually mentor you instead of just giving you tasks."
- On Flexibility: "Remote flexibility and a management team that trusts you to get your work done without micromanaging your hours."
- On Compensation: "The total compensation package—including the 401k match and the annual bonus—makes the technical pressure worth it."
Now for Improvements on Suggestions on the Survey:
- Regarding the COL instructions: totally my fault, sorry for not catching it. All of you were able to figure it out, but changed instructions from 0 - 2, so it makes a lot more sense now.
- Adding a column for manager and IC: totally good suggestion, already added to new survey for 2027
- Regarding adding gender or age: I will not add this into the survey just to make it more anonymous. I really do not see the value in this data, and I recommend just using government data to find the data.
- Regarding the health insurance question: I have implemented the change on making it have three questions: annual premium, annual deductible, person coverage. I really did not want to make this part too complicated with max out of pocket and copay and etc. I think the premium, coverage and deductible is acceptable amount.
- Edited the salary section to organize the % 401k match, salary, bonus, RSU to be in the same section making it easier, but separated the questions.
Comparison from the 2024, 2025 and 2026 Reddit Survey Results will be in another post, since this post is getting insanely long. Again, any other improvements or suggestions, please just comment below.
TDLR: Just check the 1st salary graph if you want the main results.
r/MechanicalEngineering • u/LiDAR3DGUY • 12h ago
Corrugated plant scanned with 3D mapping
Use LiDAR scanning to create a 3D digital twin of the production floor, capturing equipment, machinery, and the surrounding environment.spend a lot of time in these environments. Anyone else doing similar work?
r/MechanicalEngineering • u/Trick-Signature9586 • 3h ago
Can I stick my foot in the door?
Unsure if this is an EngineeringStudents question or it belongs here.
I am about to graduate with a degree in product design and realization, but I am finding it difficult to find work. Additionally, I have taken some engineering classes throughout my degree and realized that I am content with engineering/cad work until I build enough credibility to get a job in design.
I've decided to pursue a master's in mechanical engineering. What I am curious about is if I should wait until I get a job or complete the master's and then go for engineering jobs. Right now, I don't know if I'm hirable, because just because I've taken classes and will be accepted to my program if I apply, I don't have the bachelor's degree.
Has anyone here got their foot in the door before getting a master's? If so, what did you talk about in applications/interviews to build up trust?
r/MechanicalEngineering • u/me0www4 • 37m ago
3rd year Mech Eng student in Australia, which certificates actually help you stand out?
Hey all, I’m 21M, studying a Bachelor of Engineering (Mechanical) (Honours) with a minor in Engineering Enterprise & Project Management in Australia. I’ve just finished my 3rd year and want to use the break to become more employable before I graduate. I’m mainly interested in HVAC/building services, mining and renewables. For those working in these industries or who’ve hired grads: which certificates are actually worth doing to stand out to employers? Any advice is appreciated, thanks!
r/MechanicalEngineering • u/boatagainstthecurent • 42m ago
Professional development
I just started my first job as a mechanical engineer. My job consists of reading alot of project plans and putting together submittals for water bypassing. This is a whole new world to me as I never read project plans in college.
What are some tips or systems you have developed that have helped you digest plans? Taking notes on them and to present your understanding/ideas to other engineers?
I am also curious, is this something other people have experienced postgrad?
r/MechanicalEngineering • u/dumbkiwi1 • 10h ago
Career Progression
I have worked at a startup for 6 years and it seems like its not going anywhere. I want to switch jobs but it seems like my experience is not as useful at other places. Its possible that my interview skills are not very strong either. I am mainly a design engineer. I am looking for tips on what can I do to improve my employability as a mechanical Design engineer. I would really appreciate some good advice.
r/MechanicalEngineering • u/Historical-Neat4987 • 3h ago
Non-generic High Value Engineering skills? for people who have spent a few years in industry
So what are any niche skills (such as automating FEA simulations for example) that you have seen a lot of young/graduate engineers lacking in at your company meaning they end up having to learn within their first few years of the job
or
what are any really niche skills (maybe within your team’s specialism) that you think would be really helpful for you to have someone that has a specialism in
r/MechanicalEngineering • u/Capable-Narwhal3534 • 15h ago
Graduate Jobs
Hello everyone, I am a second year of mechanical engineering right now, and I am seriously struggling with the coursework and assignments and literally everything. I just want to ask is the job gonna be this hard or much more breathable because if I gotta work a job as hard as what I am going through right now for the next 30 years of my life then Im cooked. My hairline is declining right now. I want to know to see whether I should drop out or nah.
r/MechanicalEngineering • u/IntgralAI • 6h ago
What’s the last repetitive CAD task you ended up doing manually?
I’m part of the team at Intgral, working on tools for mechanical engineers. I’m trying to understand where existing CAD workflows still leave people doing repetitive work.
Thinking about your most recent project, what’s one task you ended up doing manually—even after looking for a shortcut?
What were you trying to get done, which CAD software were you using, and how did you handle it in the end?
If you tried a macro, script, or AI tool, I’d also be interested in what worked and where it fell short. If your existing tools already solve it well, that’s useful to hear too.
No need to share files or anything confidential—a concrete example would be really helpful.
r/MechanicalEngineering • u/Commercial-Sugar9005 • 15h ago
What are some good certifications I can go and try to get as a 1st year mech e student?
I'm looking for certs I can do to add to my portfolio while im getting my degree but I'm not sure which hold weight and which are just filler and skipped over by recruiters.
r/MechanicalEngineering • u/Top_Wolverine_3836 • 18h ago
Google Hardware/ Data Center Eng. internship interview
So I have been in the process of trying to get into Google this school year I am currently a sophomore ME and have an internal advocate, I just received an email that I am getting two 45 minute interviews one technical and one about experience related to the Data Center engineering role.
Has anyone gone through the process of interviewing for internships on the hardware side with Google? I know it’s much less common than something like cs.
I am wondering what the interviews will be like and what to prepare for. Thanks!
r/MechanicalEngineering • u/EmergencyLight7754 • 15h ago
Northrop Grumman vs Clarios
I have two offers for internships this summer, one being at Clarios for battery simulation and modeling, and the other being at northrop grumman's space systems for electromechanical. Clarios I believe would give me much more experience in hard engineering and really interesting thermal modeling, is closer to me, and will allow me to work over the school year easier, but northrop is northrop, right? I do want to go into defense for my career. I really want some advice.
r/MechanicalEngineering • u/Affectionate-Till964 • 9h ago
Does anyone have the pdf of this book Design Data Handbook for Mechanical Engineers in SI and Metric Units (4th Edition) by K. Mahadevan and K. Balaveera
r/MechanicalEngineering • u/Affectionate-Till964 • 9h ago
Does anyone has the pdf of this book Design Data Handbook for Mechanical Engineers in SI and Metric Units (4th Edition) by K. Mahadevan and K. Balaveera
r/MechanicalEngineering • u/IntgralAI • 6h ago
What’s the last repetitive CAD task you ended up doing manually?
I’m part of the team at Intgral, working on tools for mechanical engineers. I’d like to understand how people handle repetitive CAD work in practice.
On your most recent project, what’s one task you ended up doing manually even after looking for a shortcut? Which CAD software were you using, and how did you handle it?
If you tried a macro, script, or AI tool, what worked and what still needed manual effort? If your existing tools already solve the problem well, I’d be interested in that too.
No need to share files or confidential details—a specific example would be really helpful.
r/MechanicalEngineering • u/pdildo101 • 10h ago
Career Changes
Hey everybody
I am a 25 year old man and i have been recently toying with the idea of going back to college. When i was in my senior year of high school, i was accepted into all of the major ChemE programs that i applied to, and I actually enrolled in the one that suited me best. However, i never ended up going to school. My parents made too much to get any financial aid, and i was too slow on applying for any scholarships/grants back then. I did a year ish of community college instead and am a single class from an associates degree.
I got into construction through a union, and i make great money for a 25 year old but I don’t love the time i have to give up for the wage. Last year i put in around 2700 hours and made 152k gross. With all of my benefits (insurance, HSA, Pension, and Annuity) it was actually closer to 220k full comp. 2700 hours comes out to roughly 52 hours a week for a 52 week year with no time off, and i took probably 6 weeks-2 months worth of time off last year.
The work is a bit dulling. I know i could be using my brain more and in better ways but my bills are paid. I have 2 houses; one rented and one i occupy.
With all of this considered, would it be a dumb idea for me to try to start looking into engineering programs again just to explore the possibilities that are out there? I know i would take a pay cut for a few years but i would hope to at least get some PTO, have more career growth opportunities, and a more standard schedule rather than what construction offers to me currently.
Thanks in advance for any help
r/MechanicalEngineering • u/Blunderbuzzx • 2h ago
Suggestions for Job opportunities
Hey all,
My brother is actively looking for job opportunities, he is fine with any kind of roles.. like freshers or exp.
He did B tech in mechanical and mtech In cad/ cam.
He is open to both technical and managment roles like PLM etc. Even if you folks could suggest some appropriate profiles to look for concerning the resume, it’d be really helpful. Attaching it for ref. Pls shoot ur responses. Thanks much.
Edit: Cropped out technical skills, mb
Technical Skills
Pre-Processing: HyperMesh
Solvers: OptiStruct, Abaqus
Post-Processing: HyperView
CAD Modelling: Siemens NX 12, CATIA V5, PTC Creo
Other Software: Microsoft Office 365
r/MechanicalEngineering • u/edcuster • 15h ago
Career advise/pivot
Hi all,
I graduated 2 years ago with my BS in Mechanical Engineering. I had 2 internships in the machined mechanical components/control systems. When applying for jobs the only response I got was from construction. I worked in the wind industry for a year and now have been working in the industrial construction industry both for large general contractors. Long story short I hate it. What are some other job titles that may fit my experience or and industry that might have some relevance to my experience?
Thanks.
r/MechanicalEngineering • u/Acamori • 1d ago
My Compendium (Updated)
I posted this about 9 months ago, but I've since added and tweaked quite a bit in it (still no metric specific version, sorry)
This is a compendium of excel calculators and references that I've developed and/or adapted. Collected into one document so I'm not looking all over the internet trying to find answers to common issues I have in my day-to-day engineering.
I built it in Excel then imported it to Google Sheets, so some things may have broken that I didn't catch yet. Past experience indicates that some inter-sheet references may break when going back to Excel.
I've done my level best to ensure all the math checks out, but there's always potential for errors. Feel free to point them out if you find them.
r/MechanicalEngineering • u/Lord_DerpyNinja • 1d ago
How much has your degree made?
It's pretty widely accepted that engineers make decent money pretty consistently, at least enough to live on your own/with a partner, but this comes from the role and not necessarily the degree. I was wondering if there were any people here with a MechE degree but wound up in a different job(either starting as an engineer or taking a different path), and if so, what is your pay like in that role? Is it better or worse than a normal engineer? How long did it take to acquire this role? Im really curious to see what the degree has to offer and where it has taken some people.
r/MechanicalEngineering • u/OriginalSquirrel3372 • 4h ago