r/RepTimeQC • • Jul 11 '24 Diamonds are Forever Bravo Take My Silver

Other Brands First QC? Guide on what to look out for and what to write.

758 Upvotes

Welcome to the ReptimeQC subreddit!

Before reading on, make sure you've read the main guide for QC posting, otherwise this won't make much sense to you. Done? Let's go.

This specific guide is intended to be a visual supplement: showing you exactly what to look for when you complete your QC templates. For obvious reasons, this guide will skip parts that aren't visual.

I've used pictures that mostly come from this subreddit. If anyone is uncomfortable, DM me and I'll replace the picture.

With that in mind, let's begin.

Index Alignment

Here, you are expected to assess how well the index markers on your watch are aligned. You can use the index alignment tool to assist you in this regard. An example of good index alignment is this:

The indices themselves are straight. They are also perfectly aligned with the minute markers.

Index misalignment, on the other hand, looks like this:

Look at 7. It is rotated clockwise and does not sit properly in its slot.

Or this:

Look carefully at 6. You will see that the bottom of the index is rotated slightly towards the left.

Now that you have an idea of what to look out for, what should you be writing in the template?

You need to describe any misalignment you see in detail. Statements like "6 is off" or "3 is kinda wonky" or "not sure about 1, help please" are not acceptable. This is because unless the misalignment is immediately obvious (and in most cases, it is not), users will not know what you are talking about. You may not get the help you want as a result. Be specific, like the following examples:

"The 7 marker does not seem to fit into the slot nicely. It is rotated towards the right and looks like it is dancing around."

"The 6 marker does not seem to line up straight with the crown in between swiss made. Based on what I can see, it appears to be slightly tilted to the left."

A caveat here: Just because there may be some misalignment does not necessarily mean you should definitely RL the watch. As the main guide points out, all reps are subject to a level of inaccuracy. It would be entirely unrealistic to expect gen standards for index alignment. Further, different reps are subject to different standards: a XF Pelagos, for instance, is known for having problematic indices - so much so that even if you RL, you are unlikely to get anything better. Conversely, CF Explorers are now getting so good that even slight misalignment would not be par for the course.

A good guide would be to assess your watch based on proportion. One slightly misaligned index is not a problem. But one majorly misaligned index or many misaligned indices on a single dial could justify RL.

Just for illustration, this is misalignment that I would RL for:

There are too many mistakes on this watch for me to accept. The 9 index is too near to the minute marker. 4, 5 and 7 are not aligned with their respective minute marks - they are all off to the left. 6 is rotated counterclockwise. Taken on their own, each error might not be enough for RL. But taken together, this is unacceptable.

That deals with index alignment. Let's move on.

Date Wheel Alignment

This applies to watches which display the date. If your watch does not display a date, there is no need to consider this. You will look silly if you say that the date wheel alignment is good when your watch is a no-date Sub, for example.

Here, you are tasked to consider if the date is properly displayed in the date window. Often times, this is a question of how well-centered the date is. A good example of date wheel alignment is this:

Take a look at the 21 at the right side of the watch. It is situated exactly in the center of the date window.

An example of misalignment is this:

Look at the 27 on the right. You can see that the date is misaligned towards the left, with the 2 touching the rim of the window.

Sometimes, the misalignment can also be as to the date numbers themselves:

This is harder to see, but if you look carefully at 25, you will notice that the 5 is higher than the 2.

Uncommonly and in the alternative, the issue may be with the Cyclops itself (the magnifier that covers the date window):

Here we see a Cyclops which is rotated slightly anti-clockwise. You can observe this by looking at the bottom rim of the date window. The Cyclops is obviously lower at the left corner of the date window when compared to the right. The requisite deviation is repeated at the top of the date window, with the right side being higher than the left.

Now that you know what to look for, let's discuss what to write.

As with index alignment, unless the issues are immediately obvious (and most of the time, they are not), you need to be very specific. Comments like "the date seems off", "2 in 25 is kinda off", "date looks weird" are not acceptable. They do not tell readers what you are looking for. You'll get faster and better results if you identify the issues for your reader. For example:

"The date seems misaligned towards the left. Part of it is touching the left border of the date window."

"The 5 in the date appears to be slightly higher than the 2 next to it."

"The Cyclops does not seem to be straight. It looks like it is slanted towards the left?"

As with index alignment, please note that not all misalignment will justify RL, especially for date wheels. All rep date wheels come with varying degrees of misalignment. A few misaligned dates are usually not enough for RL, unless the date is clearly cropped out of the date window or touching the rim. A little misalignment towards either side of the date window is also generally more than okay; a good way to gauge is to zoom out to the actual size of the watch and see if the misalignment is still immediately visible. If not, you're likely to be good to go.

Here is an example of misalignment I would nevertheless GL:

You will see that the date is situated slightly towards the right. However, the date is well within the date window and the misalignment is too slight to be seen on wrist at actual size.

On to the next topic.

Bezel

There are two main things to look out for: First, whether the "pip" (usually a lumed marker at the 12 position) is centered. Second, the quality of any engraving.

This section would also cover any possible damage to the bezel or anything else unusual, including any misalignment.

Example of a good bezel:

Nothing out of the ordinary. Engravings are sharp and nicely filled in. By and large, the colour transition is also acceptable. No alignment issues either.

An example of misalignment:

Pip at 12 on the bezel appears to be misaligned towards the right. While the reflection may be making things look worse than they are, this is something that would deserve a second look at.

Generally speaking, most problems that surface nowadays have to do with the pip - even then, these are not entirely common. Engravings and alignment are usually not an issue with higher level reps. With this in mind, what do we write?

As with the other sections, you are going to need to be specific. "Bezel looks off", "pip looks kinda off", "I don't know about the bezel, seems weird to me" are phrases that we see everyday in this subreddit. But none of these phrases are acceptable; they do not direct the reader to what OP is seeing. Details are king - and if you are going to pluck the crown, you're going to have to write like this:

"The pip at 12 is not centered. It seems to touch the right side of the triangle."

"The printing on the bezel at 3 seems to be angled down. It does not match the index on the dial."

The key is to visually direct your reader to the exact point that you say is a problem. The word "off" on its own says nothing to that effect.

On to the next point.

Solid End Links (SELs)

Possibly the least understood of all sections as a lot of newbies do not really know what they are looking for.

The ultimate guide to this is here. But for convenience, I'm going to summarise several key points about SELs.

SELs refer to the final links between the watch case and the bracelet. I've highlighted it below:

Look carefully at the portion highlighted in green.

Not all watches have SELs. Only watches which have that portion as highlighted above - and for QC purposes, the SEL section really only applies to Rolex reps. Tudors have SELs (which can also be QC-ed to some extent), but SELs on a Tudor are not held to the same standard as SELs on a Rolex.

Now, what are we looking for when we assess SELs? We are looking for gaps between the lugs and the SELs themselves. I've indicated this below:

The black line in the center of the red box is where the SEL meets the lug. This is where you are supposed to look for gaps.

An SEL gap appears when there is separation between the SEL and the lug. But what is a gap?

A gap appears when you can see through the space between the SEL and the lug. There is no gap when all you can see is a black line. There may be some variation in how thick the black line is, but for QC purposes there is nothing to be worried about until and unless you can actually see what's behind the watch.

This is generally not a problem on higher level reps (and by now, pretty rare). I will, however, show you an example of something that may be an actionable gap:

You will see that there is no black line. Instead, light shines through the space between the SEL and the lug.

Credits for the gap picture here.

What does this mean? If all you see is a black line, even if it is slightly thicker than another SEL on the same watch, there should be no actionable gap. I am going to highlight the last few QC templates submitted where the user said there was a gap - but there really wasn't (to me, at least):

Top right SEL was an issue for OP. However, as no light is shining through, this is not considered an SEL gap to me.
OP opined that there was a gap at the top right SEL. I don't see it at all.
OP said that there was a slight gap at the bottom left SEL. Again, all I can see is a black line. I would not classify this as a gap.

If, after going through all the examples above, you still feel that there is a gap, highlight it in the template by identifying which part of the watch you are looking at; there are really only four options: top left, top right, bottom left, bottom right. Doing so helps users zoom in directly on your issue and saves time.

To the last segment.

Dial Printing

Here, you are tasked to check if the printing on the dial has been poorly done. By this, we mean defects in the workmanship of the printing; printing which differs from gen (such as the infamous "floating r") would not be a QC defect per se.

An example of dial printing with no issues:

All the words are clearly printed. There is no bleeding on any part of the print, with edges sharp and defined.

And now for examples of dial printing with issues:

Some bleeding can be observed at the top parts of VI and VII. Notice how the black ink protrudes.

Sometimes, the print can be misapplied across the entire dial:

If you look closely, you will see that the dial print is rotated clockwise across the entire dial. Observe how XI is closer to the top of the watch while I is further away.

With the above in mind, let's turn to what you should write. Again and at the risk of sounding like a broken record, do not simply write things like: "Dial seems off" or "Print seems off. letters kind of wonky?" If anything, dial printing is usually very, very small - unless you point a reader to the exact part which has an issue, chances are it won't be seen. Make certain that you provide the reader with specific directions:

"Appears to be some bleeding at the top of VI. Thoughts?"

"R in Submariner looks like only half of it was printed. Am I seeing things?"

Important note: again, just because the dial printing on your watch may have some issues, this does not necessarily equate to RL. As stated, dial print is almost microscopic - no human being is going to be able to see slight bleeding on any print when you have the watch on wrist. Feel free to point out issues that you see, but remain realistic about your expectations.

And with that, I come to the end of this guide.

Conclusion

QC-ing reps is a difficult task - which everyone in this subreddit does for free. You can help out immensely by simply being precise and detailed in your observations. The more effort you put into your template, the easier it is for members to help you - they can zoom in directly to the things that concern you.

I hope this helps you. I've tried to detail some common factors, but it would be impossible for me to catch them all. The rest is up to you - and your diligence.

I wish you smooth and trouble-free QCs always!


r/RepTimeQC • • Nov 27 '22

Announcement READ THIS PRIOR TO POSTING ANYTHING...ESPECIALLY IF YOU'RE NEW HERE...

500 Upvotes

If your template uses a NEW "yupoo" or a "mega" type of link, please note that, at the time of this typing, the automod here removes them immediately from view i.e. no QC help. We are addressing it, but....

So, what to do?

Although somewhat cumbersome for the OP, you can upload the QC packet to an Imgur account. Our automod 'likes' Imgur...and the post will show promptly. Just do NOT do it from a mobile because the mobile app loses resolution and crappy pics don't provide any benefit to anyone. Yea, yea...I know, the file compression software isn't supposed to lose quality, but it certainly does.

To add, post your complete QC album inclusive of the timing info. Do not, for the sake of your convenience, omit items. If you're bright enough to determine what is needed and what can be removed, that's great! Then, it's reasonable to conclude that you really don't need help. Simply, post it all.

If you have to wait for substantive additional info from the Seller e.g. timing data, then delay posting until you have a complete QC packet. Incomplete packages will trigger a removal of the post. Plus, it will require a return visit of anyone that commented on the incomplete post which shouldn't be required. One visit is all that it should take to QC most watches. Most won't return to a post anyway. They'll just go to the next one. The members are quite busy here. Yea, it can get crazy.

Finally, since you're a newbie, as a vote of appreciation for those members that help you, please upvote their comments. It's a nice gesture from you to them for the assist...and, it's free.

One final note, we've updated the main rules for posting. Refer to this link for info QC Must Read for New Members

Welcome to the hobby and the sub. Best wishes

Edit addition: March 2nd, 2024 - ReptimeQC member, u/EveningVariation8236 , has provided an updated version of the original QC alignment verification tool. https://watchqc.github.io/ . Thank you.

Edit addition: Jan 9th, 2024 - ReptimeQC member, u/Ro1hype has provided this for tool for alignment verification. https://qcwatch.com/ Thank you.

Edit addition: Dec 28, 2023 - For those that can't seem to find the latest link for QC alignment verification app, use this link https://web.archive.org/web/20230518035653/https://watchqc.com/

Edit addition: 8/8/2025 - Reptime QC member, u/jrverdes . has provided this version of the alignment tool to assist those that need additional help verifying the dial/bezel alignments on their watch. https://jrverdes.github.io/watch-qc-jr/ The adjustment resolutions are much finer in this app comparative to the other available apps which can be a benefit to some that need such. Check it out...Thank you.


r/RepTimeQC • • 6h ago

First Rep - QC: QF (Gain Weight) Rolex Day-Date 36mm Rose Gold Olive Dial A2836 – FicoTime (Mark)

Thumbnail
gallery
13 Upvotes

1. Dealer name: FicoTime (Mark)

2. Factory name: QF (Gain Weight – 160g)

3. Model name (& version number): Day-Date 36mm 128235 Rose Gold / Olive Green Roman Dial (A2836)

4. Price Paid: 3,600 CNY

5. Album Links: https://mega.nz/folder/uxwS2TiD#JaWlS3MNcW1E6ZthmoBqxg

6. Index alignment: Used the alignment tool and everything lines up cleanly—VI is straight with the coronet below and all Romans/batons sit flush.

7. Dial Printing: Crisp gold printing with no bleeding; 12 o'clock coronet looks centered.

8. Date Wheel alignment/printing: Dates (3, 13, 21, 22) and days (TUESDAY, WEDNESDAY, THURSDAY) look well-centered in their windows; WEDNESDAY looked tight in one angle but extra shots from Mark confirm the full Y is clean and unclipped. Cyclops sits straight.

9. Hand Alignment: Looks aligned properly.

10. Bezel: Fluted bezel looks sharp and clean with no dings.

11. Solid End Links (SELs): Tight across all four corners with no gaps.

12. Timegrapher numbers: -2 s/d, 286°, 0.1 ms, 52.0°, 28800

13. Anything else you notice: Rehaut aligns nicely and weight is right at 160g. Looks like a GL to me. Appreciate a quick second set of eyes and thoughts!


r/RepTimeQC • • 37m ago

[FIRST QC] GMT-Master II 126710GRNR « Bruce Wayne » Jubilee from Andiot

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Andiot Watch
  2. Factory name: VSF V3
  3. Model name (): Rolex GMT-Master II 126710GRNR, Jubilee (Bruce Wayne)
  4. Price paid: $541
  5. Album links: https://andiotwatches.vip/index.php?
    route=common/home
  6. Index alignment: Measured with an overlay, every marker within ‡0.5° (basically measurement noise). 9 bar at about
    -0.7° and 4 dot at about -0.7°, but the 4 is partly hidden by the minute hand, so I'm not 100% sure about that one.
    Overlay attached.
  7. Dial printing: Looks crisp and centred to me. Green GMT-
    Master I text matches the GMT hand.
  8. Date wheel alignment/printing: Date centred under the cyclops, magnification looks right.
  9. Hand alignment: Looks fine to me.
  10. Bezel: Triangle lines up with the 12 marker (measured +0.0°). Teeth look even and the numerals are clean.
  11. Solid End Links (SELs): No gaps that I can see.
  12. Anything else you notice: Rehaut crown lines up with the 12 triangle. Clasp engravings are sharp and the polished/brushed transitions look clean. Caseback brushing is even. Weight is 141.8 g.
    GL or RL? Anything I'm missing? Thanks in advancé!

r/RepTimeQC • • 10h ago

VSF Explorer 1

Thumbnail
gallery
9 Upvotes
  1. Dealer name: Steve - Theonewatches
  2. Factory name: VSF
  3. Model name (& version number): Rolex Explorer 1 – 36mm 124270
  4. Price Paid: $498
  5. Album Links: https://mega.nz/folder/zQpzBaxC#W6vpkocNYPvI_EmuGgYJqQ
  6. Index alignment: 10 o clock is slightly off to the right
  7. Dial Printing: Good
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Good
  10. Bezel: No blemishes, all good
  11. Solid End Links (SELs): No issues, alligned
  12. Timegrapher numbers: + 1s/d, 281, 0.0ms
  13. Anything else you notice: Nothing besides the 10 o clock off. I am still new to QC’ing so any help would be appreciated.

r/RepTimeQC • • 2h ago

MGF A854AJLC Reverso Tribute Small Seconds SS/LE Blue

Thumbnail
gallery
2 Upvotes

Dealer name: TheOneWatches
2. ⁠Factory name: MGF
3. ⁠Model name (& version number): JLC Reverso Tribute Small Seconds SS/LE Blue MGF A854A; Reference Q3988481
4. ⁠Price Paid: $408 USD
5. ⁠Album Links: https://imgur.com/gallery/jlc-reverso-95tZ4Kp
6. ⁠Index alignment: none of the hour marks look crooked to me. Everything looks pretty much aligned but I would love any feedback
7. ⁠Dial Printing: no defects I see
8. ⁠Date Wheel alignment/printing: wheel date looks center based on the photos I see
9. ⁠Hand Alignment: hands look reasonably aligned, would like any feedback on this
10. ⁠Bezel: no engravings that look improperly filled
11. ⁠Solid End Links (SELs): no gap, it's the leather strap but looks how it should
12. ⁠Timegrapher numbers: still trying to understand how to read this. It looks like the amps are 286; beat error is 0.0 and the 0s/d. Is that accurate and good for this watch?
13. ⁠Anything else you notice: I noticed some red paint or markings on the back and leather looks not genuine but could be just the photos


r/RepTimeQC • • 2h ago

QC: ZF Royal Oak Grey Dial 15450

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Necoclock
  2. Factory name: ZF
  3. Model name (& version number): Ap Royal Oak 15450
  4. Price Paid: $438
  5. Album Links: https://mega.nz/folder/mwZ2WAAS#1LOM7oUH68s6h9amUz58HQ
  6. Index alignment: Dialcheck app failed it. Methinks its not perfect but tolerable
  7. Dial Printing: Ok for
  8. Date Wheel alignment/printing: The 7 looks too near to top. Colour .. ok looks similar to dial.
  9. Hand Alignment: Good
  10. Bezel: The screw at 4 o'clock seemed mis-aligned, heck the 5 o'clock too? Am i imagining things?
  11. Solid End Links (SELs): NA.
  12. Timegrapher numbers: -6 secs, 335 degrees, 0.0ms
  13. Anything else you notice: Anything glaring? The screws alignment mainly bothers me. My wife commented it liked how i park my car in a parking lot, always not straight.

r/RepTimeQC • • 6h ago

[QC] - First time - Seamaster 300 "No Time to Die" Limited Edition VSF v7 NTTD

Thumbnail
gallery
3 Upvotes

Here is my first rep and first QC. I'd appreciate a second or third set of eyes. Thanks for taking a look!

Dealer name: Andiot

  1. Factory name: VSF
  2. Model name (& version number): Seamaster 300 "No Time to Die" Limited Edition VSF NTTD 1:1 Best Edition on Titanium Mesh Bracelet SA8806 Super Clone V7
  3. Price Paid: $498
  4. Album Links: All attached
  5. Index alignment: Alignment looks a bit off to me but this is my first time using the tool
  6. Dial Printing: Dial looks a bit dark to me
  7. Date Wheel alignment/printing: No date
  8. Hand Alignment: Looks okay to me
  9. Bezel: Doesn't look 100% aligned with the alignment tool but may be error on my part
  10. Solid End Links (SELs): Nothing sticks out to me
  11. Timegrapher numbers: -1 s/d, 284° amplitude, 0.1 ms beat error
  12. Anything else you notice: Not 100% confident on doing this QC on my own. Any help with this would be greatly appreciated!

r/RepTimeQC • • 10h ago

First ever Rep! Please help me QC this Clean Plus, Datejust, 41mm, 126334 from Chen Watch

Thumbnail
gallery
6 Upvotes
  1. Dealer name: Chen Watch
  2. Factory name: Clean Plus
  3. Model name (& version number): Date just, 41 mm, 126334
  4. Price Paid: $475 (shipping and customs insurance)
  5. Album Links: n/a
  6. Index alignment: this is my first time using the alignment tool and I'm not sure if I'm doing it right but #1, 2, 4, 7 and 10 look a little off, or maybe the angle is a little bit tilted?
  7. Dial Printing: looks fine to me
  8. Date Wheel alignment/printing: looks fine to me
  9. Hand Alignment: looks ok?
  10. Bezel: I can't see anything wrong.
  11. Solid End Links (SELs): looks ok
  12. Timegrapher numbers: +2s/d, 253°, 0.2ms, 52.0°, 28800
  13. Anything else you notice: Aside from the index alignment, everything else looks good to me. I really appreciate you guys' help.

r/RepTimeQC • • 5h ago

ARF V2 Datejust 36mm, Green Ombre

Thumbnail
gallery
2 Upvotes
  1. Factory name: Arf V2
  2. Model name (& version number): Datejust 36mm, Green Ombre V2
  3. Price Paid: 2250CNY
  4. Album Links: pics as attached
  5. Index alignment: Initially felt that the 9 and 6 were slightly off at the normal photos, but the QC seems to show this is a excellent piece. Nitpicking would be 1,9 and 11 i'clock markers being slightly off
  6. Dial Printing: I think from this POV it looks perfect, not too sure how to judge it other then it looks great
  7. Date Wheel alignment/printing: looks to be accurate, just the cyclops feels slightly skewed to the right side
  8. Hand Alignment: looks good
  9. Bezel: Not too sure how to judge them. I got this model as another sub (mainly for koreans) seems to really like ARF V2 as their bezels were done in collaboration with some korean modders so they are extremely sharp. I don't know if you cant tell the difference here
  10. Solid End Links (SELs): looks good b
  11. Timegrapher numbers: -1 s/day, amplitude 291°, beat error 0.0ms, lift angle, 52°, beat rate 28,800 bph
  12. Anything else you notice?: not really, initially the first QC pic, (Pic 2) I felt that the 9 and 6 o clock were off, but with the qc tool isolating things I think this looks really good

r/RepTimeQC • • 10h ago

Please help me QC this RWF Daytona 126500

Thumbnail
gallery
5 Upvotes
  1. ⁠Dealer name: Andiot 
  2. ⁠Factory name: RWF 
  3. ⁠Model name (& version number): Rolex Daytona white dial panda 126500 
  4. ⁠Price Paid: $743
  5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/263478360?uid=1
  6. ⁠Index alignment: seems ok but not 100% sure 
  7. ⁠Dial Printing: Seems good 
  8. ⁠Date Wheel alignment/printing: n/a 
  9. ⁠Hand Alignment: looks aligned 
  10. ⁠Bezel: not sure please help !
  11. ⁠Solid End Links (SELs): looks ok can’t see. Any gaps unless im missing something, 
  12. ⁠Timegrapher numbers: -3s/d, Amp 271; B.E 0.2ms, L.A 52.0, Beat 28800 
  13. ⁠Anything else you notice: Please help me with this QC, seen alot of talk regarding the batches, 110 situation, and dial situation, so if you could please give me your feedback will be much appreciated. Thank you!

r/RepTimeQC • • 16h ago

Omega Aqua Terra 41 Golf edition

Thumbnail
gallery
13 Upvotes
  1. ⁠Dealer name: Ficotime
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Aqua Terra 41 golf edition
  4. ⁠Price Paid: $360
  5. ⁠Album Links: https://mega.nz/folder/OwYl0BoD#InKaglmo8T6p3RSABXQVbg
  6. ⁠Index alignment: Looks slightly off on 2 and 8
  7. ⁠Dial Printing: Lettering on the "Omega" seems crooked
  8. ⁠Date Wheel alignment/printing: looks good to me
  9. ⁠Hand Alignment: look solid
  10. ⁠Bezel: Bezel looks solid
  11. ⁠Solid End Links (SELs): na
  12. ⁠Timegrapher numbers: +7 s/d - 0.3ms 245/52 deg
  13. ⁠Anything else you notice: the omega logo/text looks but odd to me, have another aqua terra from vsf which looks solid..

r/RepTimeQC • • 6h ago

XF Pelagos 42 Titanium

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Ficotime
  2. ⁠Factory name: XF
  3. ⁠Model name (& version number): Tudor Pelagos XF unsure of version
  4. ⁠Price Paid: $435 all in.
  5. ⁠Album Links: https://mega.nz/folder/a8BR0ALC#-U-BHStxtWLXPJqcCSkVHg
  6. ⁠Index alignment: 7 seems off the most, and 4 and 5 look Off but not as bad as 7.
  7. ⁠Dial Printing: looks good, maybe thin.
  8. ⁠Date Wheel alignment/printing: looks ok. On the 11th it seems high.
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: looks ok
  11. ⁠Solid End Links (SELs): bottom left right seems wide open.
  12. ⁠Timegrapher numbers: Looks good
  13. ⁠Anything else you notice: The indices seem tilted but I read that it’s common. Any help with be great.

r/RepTimeQC • • 11h ago

Omega Aqua Terra 38mm Black Lacquered Dial

Thumbnail
gallery
5 Upvotes
  • Dealer name: InTime
  • ⁠Factory name: VSF
  • ⁠Model name (& version number): Aqua Terra 38mm 150M Black Lacquered Dial
  • ⁠Price Paid: $370
  • ⁠Album Links: https://www.intimeqc.com/188767/
  • ⁠Index alignment: Maybe slightly off at 5
  • ⁠Dial Printing: Looks fine
  • ⁠Date Wheel alignment/printing: Looks fine
  • ⁠Hand Alignment: Looks fine
  • ⁠Bezel: Looks fine
  • ⁠Solid End Links (SELs): N/A
  • ⁠Timegrapher numbers: +6 s/d - 0.1ms 300 deg
  • ⁠Anything else you notice: That date window looks off tilt but want to have other people's opinions on this

r/RepTimeQC • • 11h ago

Cartier Santos 35mm BVF

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Andiot
  2. Factory name: BVF
  3. Model name (& version number): Santos de Cartier 35mm
  4. Price Paid: 400 USD + Shipping
  5. Album Links: all pictures here
  6. Index alignment: Good
  7. Dial Printing: Good
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: i don't know how to check it, sorry
  10. Bezel: looks good
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: Rate: -2s/d Amplitude: 277 Beat error: 0.2ms

r/RepTimeQC • • 18h ago

(First Time QC) Yacht-Master 37mm CSF

Thumbnail
gallery
9 Upvotes
  1. Dealer name: Andiot
  2. Factory name: CSF
  3. Model name (& version number): Yacht-Master 37mm 268622
  4. Price Paid: 300 USD + Shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263518694?uid=1
  6. Index alignment: looks good
  7. Dial Printing: looks clean
  8. Date Wheel alignment/printing: date looks a little to the left
  9. Hand Alignment: looks ok to me
  10. Bezel: looks good to me
  11. Solid End Links (SELs): no idea
  12. Timegrapher numbers: Rate: +2s/d Amplitude: 277, Beat error: 0.3ms
  13. Anything else you notice: Im new to QC so I could be missing something. Would appreciate some help before i GL, Thanks everyone

r/RepTimeQC • • 17h ago

VSF DIW Carbon Submariner

Thumbnail
gallery
8 Upvotes
  1. ⁠Dealer name: TrustyTime
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): DiW Carbon Submariner
  4. ⁠Price Paid: 338 USD + Shipping
  5. ⁠Album Links: N/A
  6. ⁠Index alignment: looks good
  7. ⁠Dial Printing: looks clean and sharp
  8. ⁠Date Wheel alignment/printing: centered in both directions
  9. ⁠Hand Alignment: looks ok to me
  10. ⁠Bezel: Looks like chips or scrapes on it at 3’oclock (or packaging material)
  11. ⁠Solid End Links (SELs): N/A as integrated
  12. ⁠Timegrapher numbers: Rate: +0s/d Amplitude: 262, Beat error: 0.3ms
  13. ⁠Anything else you notice: Biggest concern looks to be some kind of scrape or maybe just packaging material on the bezel at 3’oclock. I circled in two photos. Thoughts on this? Thanks!!

r/RepTimeQC • • 1d ago

Yacht Master 40 126622 Gold Factory v2 (actually v2 this time)

Thumbnail
gallery
53 Upvotes
  1. Factory name: Gold Factory
  2. Model name (& version number): Yacht Master 40 126622 (V2)
  3. Price Paid: US$ 670
  4. Album Links: pics as attached
  5. Index alignment: perfect or close to it
  6. Dial Printing: Compared to my previous v1 QC, I feel like this one is a vast improvement, I cannot see the fine details of the dial itself but i think it is just lighting from the image. looks good.
  7. Date Wheel alignment/printing: nailed it
  8. Hand Alignment: on point
  9. Bezel: looks good, so I put two alignment photos and it looks like the bezel numbers might be off but that is maybe how it supposed to be? I am hoping some of you wizards can tell me.
  10. Solid End Links (SELs): looks good but please check especially top right and bottom left to quell my paranoia
  11. Timegrapher numbers: +5 s/day, amplitude 298°, beat error 0.1ms, lift angle, 52°, beat rate 28,800 bph
  12. Anything else you notice? So for anyone following my previous post, I had asked for a v2 but was provided QC for a V1 instead, which Steve has now remedied. It is my understanding that the movement will allow you to clarify freesprung vs not, which I'm hoping someone can also chime in on.

I think the watch looks great and am ready to green light once the overlords boost my confidence about the few minor tidbits I may or may not have noticed.


r/RepTimeQC • • 12h ago

VSF Omega World Timer Titanium

Thumbnail
gallery
2 Upvotes

First QC here. Looking for opinions from the rep experts, especially those familiar with this model.

Dealer name: Andiot

Factory name: VSF

Model name (& version number): Omega Worldtimer Titanium

Price paid: $330

Album link: https://andiotwatches.x.yupoo.com/search/album?uid=1&sort=&q=191388

Index alignment: In the 1st picture, the 12-to-6 alignment looks fine, but the 7-to-12 markers look misaligned. In the 2nd picture, everything looks fine.

Dial printing: I'm definitely not an expert in this area. ChatGPT advised me to get macro shots so I could properly compare the dial with genuine photos. Alaska, Samoa and Noumea look slightly off to me in all the pictures, and the tops of the letters appear to be cut off slightly. On the inner 24-hour ring, some of the numbers at the top also look like they're being cut off.

Date wheel alignment/printing: Fine.

Hand alignment: Fine.

Bezel: Fine.

Solid End Links (SELs): Fine.

Timegrapher numbers: 0 s/d, 269 amplitude, 0.2 ms beat error, 52° lift angle.

Anything else you notice?

In the QC video, when Andiot moves only the hour hand, the inner wheel starts moving slightly back and forth. I noticed that this wasn't happening in another QC video posted by a user who purchased from The One Watches.

The inner 24-hour wheel in The One Watches' QC video also looks much clearer, without any of the apparent cut-off numbers that I'm seeing on mine.

I've never had to RL a watch before, but 😬...


r/RepTimeQC • • 12h ago

Zf tudor bb burgundy

Thumbnail
gallery
2 Upvotes

Known to have issues with these qcs, and this is my 2nd qc. Are the 9 and 6 markers acceptable and the best i should expect or is this a RL

1.Dealer: phoenix

2. Factory: zf

3. Model: zf tudor bb burgundy

4:price $279

5:Album: unfortunately no link to album but photos attached

6: index alignment: 9 slightly off, 6 slightly low

7. Dial Printing: looks clear and even.

8. Date Wheel. N/a

9. Hand Alignment : no pics at 12 but never seems to be a problem

10. Bezel: looks like it needs a slight turn and the 9 marker looks wierd. Maybe photo angle

11.SELS: good

12.Timoghaph: within its limits and reads good

Thank you community.


r/RepTimeQC • • 14h ago

Quality Control Tudor Pelagos

Thumbnail
gallery
3 Upvotes

[QC] XF Tudor Pelagos 42 Black 25600TN — TheOneWatches (Steve)
Factory name — XF, my understanding when ordering. Exact version unconfirmed.
Model name (& version number) — Tudor Pelagos 42 mm, black dial, ref. 25600TN.
Price paid — [US$448 all in w/shipping
Album links — Pics attached, along with the crown-operation and timegrapher videos.
Index alignment — Looks very good. I checked each hour marker in the front-on shot and don’t see any obvious rotation or crooked markers. The 12 o’clock triangle lines up well with the 6 o’clock marker.
Dial printing — Looks sharp and evenly spaced. The Tudor shield and the five lines of text above 6 look clean.
Date wheel alignment/printing — The “30” looks centered in the window, with even spacing and clean printing.
Hand alignment — Looks good as Steve cycles the hands. The video moves past 12 quickly, so exact overlap is hard to judge.
Bezel — The pip looks centered over the 12 o’clock triangle, and the 30-minute mark lines up well with 6. I’d appreciate a second set of eyes on the bezel alignment.
Solid end links (SELs) — Both look seated, with no obvious daylight gaps in the QC shots. The protective film makes the corners harder to judge.
Timegrapher numbers — −1 to 0 s/day, 266–268° amplitude, 0.0 ms beat error, with the machine set to 52° lift angle and showing 28,800 bph.
Anything else you notice? — I’m leaning GL. My main remaining check is the clasp. The photos show it open and closed, and I’d like a quick video of the safety and clasp snapping shut and the adjustment mechanism moving and locking into place. Anything else stand out?


r/RepTimeQC • • 13h ago

VSF Daytona Cement Grey – Custom Edition | QC Feedback

Thumbnail
gallery
2 Upvotes

Hey everyone!

Finally got a chance to take a closer look at this custom VSF Daytona Cement Grey and wanted to share the QC pictures.

I’ve always liked this configuration, and the additional finishing details caught my attention. According to the dealer, this version features a hand-finished case, upgraded sapphire crystal and custom rubber strap.

I’d appreciate some feedback from anyone familiar with VSF Daytonas, particularly regarding the alignment, finishing and timegrapher readings.

1. Dealer name: RWK-king
2. Factory name: VS Factory (VSF)
3. Model name: Rolex Daytona Cement Grey – Custom Edition
4. Price paid: $880 (including insured shipping, customs and workshop QC)
5. Album links: https://imgur.com/a/mey6aqe
6. Index alignment: Looks well aligned overall. Nothing particularly concerning stands out to me.
7. Dial printing: Looks clean and consistent from the available pictures.
8. Date wheel: N/A – no date window.
9. Hand alignment: Looks fine from the pictures, although I’d appreciate a second opinion.
10. Bezel: Printing and alignment appear good overall.
11. Solid End Links: N/A – rubber strap configuration.
12. Timegrapher numbers: 0 s/d, 252° amplitude, 0.2 ms beat error, 28,800 bph. The readings look good overall, although I’d appreciate feedback on the amplitude.
13. Anything else you notice: The dealer describes this version as featuring a Dandong 4130 chronograph movement, hand-finished case bevels, custom white-metal plating, upgraded AR sapphire crystal and a fluoroelastomer rubber strap with titanium memory spring.

My main questions are whether you notice any alignment or finishing issues, and whether the 252° amplitude would be a concern on this movement.
Appreciate any feedback, especially from those who have experience with VSF Daytona builds!


r/RepTimeQC • • 15h ago

QC for Tudor BB54

Thumbnail
gallery
3 Upvotes

1.Dealer name: Eliuak
2. Factory name: ZF
3. Model name (& version number): Tudor Black Bay 54
4. Price Paid: 1,750 CNY
5. Album Links: N/A
6. Index Alignment: The 12 o’clock marker doesn’t seem to be perfectly centered. Is this noticeable on the wrist? 3 and 9 are also crooked
7. Dial Printing: Looks good to me.
8. Date Wheel Alignment/Printing: N/A
9. Hand Alignment: Looks good to me.
10. Bezel: The pearl pip at 12 o’clock doesn’t seem to be perfectly centered. I’m not sure if this is a common issue with this model. Is this normal for the ZF BB54? At 30 minute look off centered
11. Solid End Links (SELs): N/A. However, I noticed a small gap around the clasp area. Is this normal?
12. Timegrapher Numbers: -1 s/d, 279 amplitude, 0.1 ms, 52°.
13. Anything Else You Notice: I’ve reviewed several QC posts for the ZF BB54, and I’ve noticed that many examples seem to have alignment issues around the 3, 9, and 12 o’clock markers. I’d like to know if there are any other potential issues or red flags with this particular watch that I might have overlooked.

Any feedback or opinions would be greatly appreciated. Thank you!


r/RepTimeQC • • 13h ago

Seamaster 300m 43.5mm Ceramic/RU Black Dial ORF OR8806 free sprung

Thumbnail
gallery
2 Upvotes
  1. Dealer name: TimeUltra
  2. Factory name: OR Factory
  3. Model name (& version number): Seamaster 300m 43.5mm Ceramic/RU Black Dial ORF OR8806 free sprung
  4. Price Paid: $558 including shipping
  5. Album Links: https://mega.nz/folder/i1I0xLiY#uMZuyErjAHSOlKlHK638SA
  6. Index alignment: Looks good? 3 hours and 9 hours markers are a bit… angled. But I checked GEN and seems normal
  7. Dial Printing: Looks good
  8. Hand Alignment: Looks good
  9. Bezel: looks good
  10. Solid End Links (SELs): N/A Rubber strap
  11. Timegrapher numbers: Looks good. Running strong at -3 s/d with a healthy 272° amplitude and 0.0 ms beat error 

Anything else you notice: My first qc, so any help would be greatly appreciated.