r/RepTimeQC • • 12h ago

First time QC - RL or GL?

Post image
1 Upvotes

Hey guys! First time QC here, looking for a second pair of eyes before I approve this.

I went through the guide and looked closely at the pics, though I'm still getting used to what's normal vs. a real flaw on this model. Any thoughts on GL or RL would be really helpful, thanks!

  1. Dealer name: DDGTOP
  2. Factory name: RCF
  3. Model name (& version number): DayDate 40 Gold with Lume
  4. Price Paid: $752 Shipped to US
  5. Album Links:https://imgur.com/a/1wAIoo6
  6. Index alignment: Most of the markers look straight enough to me, though the 3 o'clock area around the date window is a little tough to judge and a couple of the other sticks might have a tiny tilt if I zoom way in. Nothing jumps out as badly crooked at normal viewing distance.
  7. Dial Printing: Text looks clean and sharp to me, spacing seems fine, top and bottom lines look level without obvious bleeding.
  8. Date Wheel alignment/printing: Date sits slightly off to the side and looks like a tiny tilt, nothing crazy, probably fine on wrist unless you stare at it up close.
  9. Hand Alignment: Hands look lined up and clean from what I can see in the shots.
  10. Bezel: Fluting looks clean and even to my eye, no obvious dings or weirdness.
  11. Solid End Links (SELs): Look tight against the lugs with no big gaps that stand out.
  12. Timegrapher numbers: all look solid from what I read in the guide.
  13. Anything else you notice: Nothing major stands out to me, just want to make sure I didn't miss a common flaw on this build.

r/RepTimeQC • • 2h ago

MGF A854AJLC Reverso Tribute Small Seconds SS/LE Blue

Thumbnail
gallery
2 Upvotes

Dealer name: TheOneWatches
2. ⁠Factory name: MGF
3. ⁠Model name (& version number): JLC Reverso Tribute Small Seconds SS/LE Blue MGF A854A; Reference Q3988481
4. ⁠Price Paid: $408 USD
5. ⁠Album Links: https://imgur.com/gallery/jlc-reverso-95tZ4Kp
6. ⁠Index alignment: none of the hour marks look crooked to me. Everything looks pretty much aligned but I would love any feedback
7. ⁠Dial Printing: no defects I see
8. ⁠Date Wheel alignment/printing: wheel date looks center based on the photos I see
9. ⁠Hand Alignment: hands look reasonably aligned, would like any feedback on this
10. ⁠Bezel: no engravings that look improperly filled
11. ⁠Solid End Links (SELs): no gap, it's the leather strap but looks how it should
12. ⁠Timegrapher numbers: still trying to understand how to read this. It looks like the amps are 286; beat error is 0.0 and the 0s/d. Is that accurate and good for this watch?
13. ⁠Anything else you notice: I noticed some red paint or markings on the back and leather looks not genuine but could be just the photos


r/RepTimeQC • • 2h ago

QC: ZF Royal Oak Grey Dial 15450

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Necoclock
  2. Factory name: ZF
  3. Model name (& version number): Ap Royal Oak 15450
  4. Price Paid: $438
  5. Album Links: https://mega.nz/folder/mwZ2WAAS#1LOM7oUH68s6h9amUz58HQ
  6. Index alignment: Dialcheck app failed it. Methinks its not perfect but tolerable
  7. Dial Printing: Ok for
  8. Date Wheel alignment/printing: The 7 looks too near to top. Colour .. ok looks similar to dial.
  9. Hand Alignment: Good
  10. Bezel: The screw at 4 o'clock seemed mis-aligned, heck the 5 o'clock too? Am i imagining things?
  11. Solid End Links (SELs): NA.
  12. Timegrapher numbers: -6 secs, 335 degrees, 0.0ms
  13. Anything else you notice: Anything glaring? The screws alignment mainly bothers me. My wife commented it liked how i park my car in a parking lot, always not straight.

r/RepTimeQC • • 5h ago

ARF V2 Datejust 36mm, Green Ombre

Thumbnail
gallery
2 Upvotes
  1. Factory name: Arf V2
  2. Model name (& version number): Datejust 36mm, Green Ombre V2
  3. Price Paid: 2250CNY
  4. Album Links: pics as attached
  5. Index alignment: Initially felt that the 9 and 6 were slightly off at the normal photos, but the QC seems to show this is a excellent piece. Nitpicking would be 1,9 and 11 i'clock markers being slightly off
  6. Dial Printing: I think from this POV it looks perfect, not too sure how to judge it other then it looks great
  7. Date Wheel alignment/printing: looks to be accurate, just the cyclops feels slightly skewed to the right side
  8. Hand Alignment: looks good
  9. Bezel: Not too sure how to judge them. I got this model as another sub (mainly for koreans) seems to really like ARF V2 as their bezels were done in collaboration with some korean modders so they are extremely sharp. I don't know if you cant tell the difference here
  10. Solid End Links (SELs): looks good b
  11. Timegrapher numbers: -1 s/day, amplitude 291°, beat error 0.0ms, lift angle, 52°, beat rate 28,800 bph
  12. Anything else you notice?: not really, initially the first QC pic, (Pic 2) I felt that the 9 and 6 o clock were off, but with the qc tool isolating things I think this looks really good

r/RepTimeQC • • 6h ago

XF Pelagos 42 Titanium

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Ficotime
  2. ⁠Factory name: XF
  3. ⁠Model name (& version number): Tudor Pelagos XF unsure of version
  4. ⁠Price Paid: $435 all in.
  5. ⁠Album Links: https://mega.nz/folder/a8BR0ALC#-U-BHStxtWLXPJqcCSkVHg
  6. ⁠Index alignment: 7 seems off the most, and 4 and 5 look Off but not as bad as 7.
  7. ⁠Dial Printing: looks good, maybe thin.
  8. ⁠Date Wheel alignment/printing: looks ok. On the 11th it seems high.
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: looks ok
  11. ⁠Solid End Links (SELs): bottom left right seems wide open.
  12. ⁠Timegrapher numbers: Looks good
  13. ⁠Anything else you notice: The indices seem tilted but I read that it’s common. Any help with be great.

r/RepTimeQC • • 6h ago

[QC] - First time - Seamaster 300 "No Time to Die" Limited Edition VSF v7 NTTD

Thumbnail
gallery
3 Upvotes

Here is my first rep and first QC. I'd appreciate a second or third set of eyes. Thanks for taking a look!

Dealer name: Andiot

  1. Factory name: VSF
  2. Model name (& version number): Seamaster 300 "No Time to Die" Limited Edition VSF NTTD 1:1 Best Edition on Titanium Mesh Bracelet SA8806 Super Clone V7
  3. Price Paid: $498
  4. Album Links: All attached
  5. Index alignment: Alignment looks a bit off to me but this is my first time using the tool
  6. Dial Printing: Dial looks a bit dark to me
  7. Date Wheel alignment/printing: No date
  8. Hand Alignment: Looks okay to me
  9. Bezel: Doesn't look 100% aligned with the alignment tool but may be error on my part
  10. Solid End Links (SELs): Nothing sticks out to me
  11. Timegrapher numbers: -1 s/d, 284° amplitude, 0.1 ms beat error
  12. Anything else you notice: Not 100% confident on doing this QC on my own. Any help with this would be greatly appreciated!

r/RepTimeQC • • 6h ago

First Rep - QC: QF (Gain Weight) Rolex Day-Date 36mm Rose Gold Olive Dial A2836 – FicoTime (Mark)

Thumbnail
gallery
14 Upvotes

1. Dealer name: FicoTime (Mark)

2. Factory name: QF (Gain Weight – 160g)

3. Model name (& version number): Day-Date 36mm 128235 Rose Gold / Olive Green Roman Dial (A2836)

4. Price Paid: 3,600 CNY

5. Album Links: https://mega.nz/folder/uxwS2TiD#JaWlS3MNcW1E6ZthmoBqxg

6. Index alignment: Used the alignment tool and everything lines up cleanly—VI is straight with the coronet below and all Romans/batons sit flush.

7. Dial Printing: Crisp gold printing with no bleeding; 12 o'clock coronet looks centered.

8. Date Wheel alignment/printing: Dates (3, 13, 21, 22) and days (TUESDAY, WEDNESDAY, THURSDAY) look well-centered in their windows; WEDNESDAY looked tight in one angle but extra shots from Mark confirm the full Y is clean and unclipped. Cyclops sits straight.

9. Hand Alignment: Looks aligned properly.

10. Bezel: Fluted bezel looks sharp and clean with no dings.

11. Solid End Links (SELs): Tight across all four corners with no gaps.

12. Timegrapher numbers: -2 s/d, 286°, 0.1 ms, 52.0°, 28800

13. Anything else you notice: Rehaut aligns nicely and weight is right at 160g. Looks like a GL to me. Appreciate a quick second set of eyes and thoughts!


r/RepTimeQC • • 10h ago

VSF Explorer 1

Thumbnail
gallery
9 Upvotes
  1. Dealer name: Steve - Theonewatches
  2. Factory name: VSF
  3. Model name (& version number): Rolex Explorer 1 – 36mm 124270
  4. Price Paid: $498
  5. Album Links: https://mega.nz/folder/zQpzBaxC#W6vpkocNYPvI_EmuGgYJqQ
  6. Index alignment: 10 o clock is slightly off to the right
  7. Dial Printing: Good
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Good
  10. Bezel: No blemishes, all good
  11. Solid End Links (SELs): No issues, alligned
  12. Timegrapher numbers: + 1s/d, 281, 0.0ms
  13. Anything else you notice: Nothing besides the 10 o clock off. I am still new to QC’ing so any help would be appreciated.

r/RepTimeQC • • 10h ago

First ever Rep! Please help me QC this Clean Plus, Datejust, 41mm, 126334 from Chen Watch

Thumbnail
gallery
6 Upvotes
  1. Dealer name: Chen Watch
  2. Factory name: Clean Plus
  3. Model name (& version number): Date just, 41 mm, 126334
  4. Price Paid: $475 (shipping and customs insurance)
  5. Album Links: n/a
  6. Index alignment: this is my first time using the alignment tool and I'm not sure if I'm doing it right but #1, 2, 4, 7 and 10 look a little off, or maybe the angle is a little bit tilted?
  7. Dial Printing: looks fine to me
  8. Date Wheel alignment/printing: looks fine to me
  9. Hand Alignment: looks ok?
  10. Bezel: I can't see anything wrong.
  11. Solid End Links (SELs): looks ok
  12. Timegrapher numbers: +2s/d, 253°, 0.2ms, 52.0°, 28800
  13. Anything else you notice: Aside from the index alignment, everything else looks good to me. I really appreciate you guys' help.

r/RepTimeQC • • 11h ago

Please help me QC this RWF Daytona 126500

Thumbnail
gallery
5 Upvotes
  1. ⁠Dealer name: Andiot 
  2. ⁠Factory name: RWF 
  3. ⁠Model name (& version number): Rolex Daytona white dial panda 126500 
  4. ⁠Price Paid: $743
  5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/263478360?uid=1
  6. ⁠Index alignment: seems ok but not 100% sure 
  7. ⁠Dial Printing: Seems good 
  8. ⁠Date Wheel alignment/printing: n/a 
  9. ⁠Hand Alignment: looks aligned 
  10. ⁠Bezel: not sure please help !
  11. ⁠Solid End Links (SELs): looks ok can’t see. Any gaps unless im missing something, 
  12. ⁠Timegrapher numbers: -3s/d, Amp 271; B.E 0.2ms, L.A 52.0, Beat 28800 
  13. ⁠Anything else you notice: Please help me with this QC, seen alot of talk regarding the batches, 110 situation, and dial situation, so if you could please give me your feedback will be much appreciated. Thank you!

r/RepTimeQC • • 12h ago

Omega Aqua Terra 38mm Black Lacquered Dial

Thumbnail
gallery
5 Upvotes
  • Dealer name: InTime
  • ⁠Factory name: VSF
  • ⁠Model name (& version number): Aqua Terra 38mm 150M Black Lacquered Dial
  • ⁠Price Paid: $370
  • ⁠Album Links: https://www.intimeqc.com/188767/
  • ⁠Index alignment: Maybe slightly off at 5
  • ⁠Dial Printing: Looks fine
  • ⁠Date Wheel alignment/printing: Looks fine
  • ⁠Hand Alignment: Looks fine
  • ⁠Bezel: Looks fine
  • ⁠Solid End Links (SELs): N/A
  • ⁠Timegrapher numbers: +6 s/d - 0.1ms 300 deg
  • ⁠Anything else you notice: That date window looks off tilt but want to have other people's opinions on this

r/RepTimeQC • • 12h ago

Cartier Santos 35mm BVF

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Andiot
  2. Factory name: BVF
  3. Model name (& version number): Santos de Cartier 35mm
  4. Price Paid: 400 USD + Shipping
  5. Album Links: all pictures here
  6. Index alignment: Good
  7. Dial Printing: Good
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: i don't know how to check it, sorry
  10. Bezel: looks good
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: Rate: -2s/d Amplitude: 277 Beat error: 0.2ms

r/RepTimeQC • • 12h ago

VSF Omega World Timer Titanium

Thumbnail
gallery
2 Upvotes

First QC here. Looking for opinions from the rep experts, especially those familiar with this model.

Dealer name: Andiot

Factory name: VSF

Model name (& version number): Omega Worldtimer Titanium

Price paid: $330

Album link: https://andiotwatches.x.yupoo.com/search/album?uid=1&sort=&q=191388

Index alignment: In the 1st picture, the 12-to-6 alignment looks fine, but the 7-to-12 markers look misaligned. In the 2nd picture, everything looks fine.

Dial printing: I'm definitely not an expert in this area. ChatGPT advised me to get macro shots so I could properly compare the dial with genuine photos. Alaska, Samoa and Noumea look slightly off to me in all the pictures, and the tops of the letters appear to be cut off slightly. On the inner 24-hour ring, some of the numbers at the top also look like they're being cut off.

Date wheel alignment/printing: Fine.

Hand alignment: Fine.

Bezel: Fine.

Solid End Links (SELs): Fine.

Timegrapher numbers: 0 s/d, 269 amplitude, 0.2 ms beat error, 52° lift angle.

Anything else you notice?

In the QC video, when Andiot moves only the hour hand, the inner wheel starts moving slightly back and forth. I noticed that this wasn't happening in another QC video posted by a user who purchased from The One Watches.

The inner 24-hour wheel in The One Watches' QC video also looks much clearer, without any of the apparent cut-off numbers that I'm seeing on mine.

I've never had to RL a watch before, but 😬...


r/RepTimeQC • • 12h ago

Zf tudor bb burgundy

Thumbnail
gallery
2 Upvotes

Known to have issues with these qcs, and this is my 2nd qc. Are the 9 and 6 markers acceptable and the best i should expect or is this a RL

1.Dealer: phoenix

2. Factory: zf

3. Model: zf tudor bb burgundy

4:price $279

5:Album: unfortunately no link to album but photos attached

6: index alignment: 9 slightly off, 6 slightly low

7. Dial Printing: looks clear and even.

8. Date Wheel. N/a

9. Hand Alignment : no pics at 12 but never seems to be a problem

10. Bezel: looks like it needs a slight turn and the 9 marker looks wierd. Maybe photo angle

11.SELS: good

12.Timoghaph: within its limits and reads good

Thank you community.


r/RepTimeQC • • 12h ago

First QC - Daytona 126506 VSF

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Andiot Watches
  2. Factory name: VSF
  3. Model name (& version number): Rolex Daytona 126506 Gain Weight VSF 1:1 Best Edition Ice Blue Dial T Diamond Markers On Bracelet DD4131 (Free Sprung Look)
  4. Price Paid: 808$
  5. Album Links: https://imgur.com/a/VlGpmnl
  6. Index alignment: The index alignment looks good to me
  7. Dial Printing: Dial printing looks good, the white spots on some pictures are reflections as we can see on other pictures
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Hand alignment looks good too
  10. Bezel: Bezel seems fine and aligned properly, engraving looks okay too
  11. Solid End Links (SELs): There seems to be no noticeable SEL gap
  12. Timegrapher numbers: -1s/d ; 270° ; 0.1ms
  13. Anything else you notice: N/A

r/RepTimeQC • • 13h ago

VSF Daytona Cement Grey – Custom Edition | QC Feedback

Thumbnail
gallery
2 Upvotes

Hey everyone!

Finally got a chance to take a closer look at this custom VSF Daytona Cement Grey and wanted to share the QC pictures.

I’ve always liked this configuration, and the additional finishing details caught my attention. According to the dealer, this version features a hand-finished case, upgraded sapphire crystal and custom rubber strap.

I’d appreciate some feedback from anyone familiar with VSF Daytonas, particularly regarding the alignment, finishing and timegrapher readings.

1. Dealer name: RWK-king
2. Factory name: VS Factory (VSF)
3. Model name: Rolex Daytona Cement Grey – Custom Edition
4. Price paid: $880 (including insured shipping, customs and workshop QC)
5. Album links: https://imgur.com/a/mey6aqe
6. Index alignment: Looks well aligned overall. Nothing particularly concerning stands out to me.
7. Dial printing: Looks clean and consistent from the available pictures.
8. Date wheel: N/A – no date window.
9. Hand alignment: Looks fine from the pictures, although I’d appreciate a second opinion.
10. Bezel: Printing and alignment appear good overall.
11. Solid End Links: N/A – rubber strap configuration.
12. Timegrapher numbers: 0 s/d, 252° amplitude, 0.2 ms beat error, 28,800 bph. The readings look good overall, although I’d appreciate feedback on the amplitude.
13. Anything else you notice: The dealer describes this version as featuring a Dandong 4130 chronograph movement, hand-finished case bevels, custom white-metal plating, upgraded AR sapphire crystal and a fluoroelastomer rubber strap with titanium memory spring.

My main questions are whether you notice any alignment or finishing issues, and whether the 252° amplitude would be a concern on this movement.
Appreciate any feedback, especially from those who have experience with VSF Daytona builds!


r/RepTimeQC • • 13h ago

Seamaster 300m 43.5mm Ceramic/RU Black Dial ORF OR8806 free sprung

Thumbnail
gallery
2 Upvotes
  1. Dealer name: TimeUltra
  2. Factory name: OR Factory
  3. Model name (& version number): Seamaster 300m 43.5mm Ceramic/RU Black Dial ORF OR8806 free sprung
  4. Price Paid: $558 including shipping
  5. Album Links: https://mega.nz/folder/i1I0xLiY#uMZuyErjAHSOlKlHK638SA
  6. Index alignment: Looks good? 3 hours and 9 hours markers are a bit… angled. But I checked GEN and seems normal
  7. Dial Printing: Looks good
  8. Hand Alignment: Looks good
  9. Bezel: looks good
  10. Solid End Links (SELs): N/A Rubber strap
  11. Timegrapher numbers: Looks good. Running strong at -3 s/d with a healthy 272° amplitude and 0.0 ms beat error 

Anything else you notice: My first qc, so any help would be greatly appreciated.


r/RepTimeQC • • 14h ago

QC first timer. BVF Cartier Santos 35mm

Thumbnail
gallery
2 Upvotes
  1. ⁠⁠Dealer name: ChazingTime
  2. ⁠⁠Factory name: BVF
  3. ⁠⁠Model name (& version number): Santos de Cartier 35mm, White Dial, A9015
  4. ⁠⁠Price Paid: 418 USD
  5. ⁠⁠Album Links: https://intimeqc.com/188814/
  6. ⁠⁠Index alignment: N/A
  7. ⁠⁠Dial Printing: Looks centered to me
  8. ⁠⁠Date Wheel alignment/printing: N/A
  9. ⁠⁠Hand Alignment: Looks good
  10. ⁠⁠Bezel: Possible scratch or smudge on top left corner. Minimal.
  11. ⁠⁠Solid End Links (SELs): N/A
  12. ⁠⁠Timegrapher numbers: Numbers in the acceptable range
  13. ⁠⁠Anything else you notice: I've seen better QC images from other TDs but nothing crazy stands out to me. Any help appreciated.

r/RepTimeQC • • 15h ago

Quality Control Tudor Pelagos

Thumbnail
gallery
3 Upvotes

[QC] XF Tudor Pelagos 42 Black 25600TN — TheOneWatches (Steve)
Factory name — XF, my understanding when ordering. Exact version unconfirmed.
Model name (& version number) — Tudor Pelagos 42 mm, black dial, ref. 25600TN.
Price paid — [US$448 all in w/shipping
Album links — Pics attached, along with the crown-operation and timegrapher videos.
Index alignment — Looks very good. I checked each hour marker in the front-on shot and don’t see any obvious rotation or crooked markers. The 12 o’clock triangle lines up well with the 6 o’clock marker.
Dial printing — Looks sharp and evenly spaced. The Tudor shield and the five lines of text above 6 look clean.
Date wheel alignment/printing — The “30” looks centered in the window, with even spacing and clean printing.
Hand alignment — Looks good as Steve cycles the hands. The video moves past 12 quickly, so exact overlap is hard to judge.
Bezel — The pip looks centered over the 12 o’clock triangle, and the 30-minute mark lines up well with 6. I’d appreciate a second set of eyes on the bezel alignment.
Solid end links (SELs) — Both look seated, with no obvious daylight gaps in the QC shots. The protective film makes the corners harder to judge.
Timegrapher numbers — −1 to 0 s/day, 266–268° amplitude, 0.0 ms beat error, with the machine set to 52° lift angle and showing 28,800 bph.
Anything else you notice? — I’m leaning GL. My main remaining check is the clasp. The photos show it open and closed, and I’d like a quick video of the safety and clasp snapping shut and the adjustment mechanism moving and locking into place. Anything else stand out?


r/RepTimeQC • • 15h ago

QC Help - Royal Oak 41mm 15510 SS VSF 1:1 Best Edition Green Textured Dial on SS Bracelet DD4302 Super Clone

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Jtime
  2. Factory name: VSF
  3. Model name (& version number): Royal Oak 41mm 15510 SS VSF 1:1 Best Edition Green Textured Dial on SS Bracelet DD4302 Super Clone
  4. Price Paid: ~550 ($60 shipping)
  5. Album Links: https://mega.nz/folder/4vQFTL4D#xrQpqUTvnXsEEXN3eaig-g
  6. Index alignment: Looks good to me, logo is slightly tilted at "piguet"
  7. Dial Printing: Clean overall from the pictures i have, no closer images to really tell.
  8. Date Wheel alignment/printing: Centered as they should be.
  9. Hand Alignment: Good.
  10. Bezel: Slight recession as expected.
  11. Solid End Links (SEL): Integrated bracelet so N/A.
  12. Timegrapher numbers: -1s/d, 275 amplitude, 0.0ms.
  13. Anything else you notice: Everything looks good to me, wish i had better images to make a judgement about the dial print quality but thats fine - would love to hear community thoughts on the bracelete and brush quality around the watch, as well as the crown.

Thanks a lot for your help!


r/RepTimeQC • • 15h ago

QC for Tudor BB54

Thumbnail
gallery
3 Upvotes

1.Dealer name: Eliuak
2. Factory name: ZF
3. Model name (& version number): Tudor Black Bay 54
4. Price Paid: 1,750 CNY
5. Album Links: N/A
6. Index Alignment: The 12 o’clock marker doesn’t seem to be perfectly centered. Is this noticeable on the wrist? 3 and 9 are also crooked
7. Dial Printing: Looks good to me.
8. Date Wheel Alignment/Printing: N/A
9. Hand Alignment: Looks good to me.
10. Bezel: The pearl pip at 12 o’clock doesn’t seem to be perfectly centered. I’m not sure if this is a common issue with this model. Is this normal for the ZF BB54? At 30 minute look off centered
11. Solid End Links (SELs): N/A. However, I noticed a small gap around the clasp area. Is this normal?
12. Timegrapher Numbers: -1 s/d, 279 amplitude, 0.1 ms, 52°.
13. Anything Else You Notice: I’ve reviewed several QC posts for the ZF BB54, and I’ve noticed that many examples seem to have alignment issues around the 3, 9, and 12 o’clock markers. I’d like to know if there are any other potential issues or red flags with this particular watch that I might have overlooked.

Any feedback or opinions would be greatly appreciated. Thank you!


r/RepTimeQC • • 16h ago

Omega Aqua Terra 41 Golf edition

Thumbnail
gallery
13 Upvotes
  1. ⁠Dealer name: Ficotime
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Aqua Terra 41 golf edition
  4. ⁠Price Paid: $360
  5. ⁠Album Links: https://mega.nz/folder/OwYl0BoD#InKaglmo8T6p3RSABXQVbg
  6. ⁠Index alignment: Looks slightly off on 2 and 8
  7. ⁠Dial Printing: Lettering on the "Omega" seems crooked
  8. ⁠Date Wheel alignment/printing: looks good to me
  9. ⁠Hand Alignment: look solid
  10. ⁠Bezel: Bezel looks solid
  11. ⁠Solid End Links (SELs): na
  12. ⁠Timegrapher numbers: +7 s/d - 0.3ms 245/52 deg
  13. ⁠Anything else you notice: the omega logo/text looks but odd to me, have another aqua terra from vsf which looks solid..

r/RepTimeQC • • 17h ago

VSF DIW Carbon Submariner

Thumbnail
gallery
8 Upvotes
  1. ⁠Dealer name: TrustyTime
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): DiW Carbon Submariner
  4. ⁠Price Paid: 338 USD + Shipping
  5. ⁠Album Links: N/A
  6. ⁠Index alignment: looks good
  7. ⁠Dial Printing: looks clean and sharp
  8. ⁠Date Wheel alignment/printing: centered in both directions
  9. ⁠Hand Alignment: looks ok to me
  10. ⁠Bezel: Looks like chips or scrapes on it at 3’oclock (or packaging material)
  11. ⁠Solid End Links (SELs): N/A as integrated
  12. ⁠Timegrapher numbers: Rate: +0s/d Amplitude: 262, Beat error: 0.3ms
  13. ⁠Anything else you notice: Biggest concern looks to be some kind of scrape or maybe just packaging material on the bezel at 3’oclock. I circled in two photos. Thoughts on this? Thanks!!

r/RepTimeQC • • 18h ago

(First Time QC) Yacht-Master 37mm CSF

Thumbnail
gallery
9 Upvotes
  1. Dealer name: Andiot
  2. Factory name: CSF
  3. Model name (& version number): Yacht-Master 37mm 268622
  4. Price Paid: 300 USD + Shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263518694?uid=1
  6. Index alignment: looks good
  7. Dial Printing: looks clean
  8. Date Wheel alignment/printing: date looks a little to the left
  9. Hand Alignment: looks ok to me
  10. Bezel: looks good to me
  11. Solid End Links (SELs): no idea
  12. Timegrapher numbers: Rate: +2s/d Amplitude: 277, Beat error: 0.3ms
  13. Anything else you notice: Im new to QC so I could be missing something. Would appreciate some help before i GL, Thanks everyone