r/RepTimeServices • • 7m ago

Advice VSF Aquaterra - Broken Crown and Stem

Thumbnail
gallery
2 Upvotes

Hey everyone, I’m in a bit of a bind with my VSF Aqua Terra 38mm. The crown got stuck, and after applying a little extra torque, it completely snapped off. I’ve managed to remove the stem from the case, but I’m struggling to source replacement parts online and my TDs haven't been able to help either.

Does anyone know where I can find the right spare parts, or should I just look for genuine ones instead? Any advice would be greatly appreciated!

Thanks! 😊


r/RepTimeServices • • 3h ago

Question Who makes a decent aftermarket bracelet for vintage Rolex builds?

2 Upvotes

For those of you working on vintage builds, what aftermarket bracelets have you had the best luck with?
Seems like there’s a pretty big difference in quality out there, especially when it comes to end-link fitment and how much play there is between the links.
I’ve come across OystersJubilee and a few other options, but I’m curious what people who actually work with these bracelets think.
Any brands you’ve been impressed with? Or ones that looked good in photos but turned out disappointing?


r/RepTimeServices • • 5h ago

Advice Dial appears to shake/wobble when crown is turned

2 Upvotes

It's very hard to capture on video so I couldn't, but like the title says, the dial wobbles/shakes. Fortunately, I don't think the dial is shifted permanently, at least yet, but it worries me if the dial will end up fall apart from the movement (if that is the issue), or something else might happen that I should address the issue before it gets irreversible.

If anyone went through issues similar to this or if I should stop wearing the watch and take it to someone asap, please let me know. thanks in advance.


r/RepTimeServices • • 7h ago

Question Is This from VSF printing is bad

Thumbnail
gallery
1 Upvotes

last week I purchased a VSF
DateJust 41 126334 904L Blue Stick Dial on Jubilee Bracelet VS3235 (Free Sprung) V2 V2s Weighted 133g from TK watch. Unfortunately I couldn’t get the QC to download so I couldn’t Zoom in.
When I received the watch I noticed the printing wasn’t what I was expecting.
Justin the TD agreed to get me a new dial . I was looking for some guidance on swapping the dial on another sub
some one said Laser Etched Crown looks off. Now has me thinking is this a VSF? Any feedback would be greatly appreciated. less


r/RepTimeServices • • 10h ago

Question I'm'm supposed to swap it myself?

Post image
22 Upvotes

I just received this beautiful watch and paid for deep crystal, but as you can see, I received that little package that says “deep” on it. When I opened it, there was a crystal inside. i sent a message to TD.
Factory RCF


r/RepTimeServices • • 12h ago

Advice VC quick release inserts

1 Upvotes

Hi

Does anyone know if its possible to find these for VC 4500 for cheap?

Found these on AliX for aprox 42 usd...

Thanks!!


r/RepTimeServices • • 15h ago

Question Omega 007 quebrado

Thumbnail
gallery
1 Upvotes

Comprei um omega 007 do hont, chegou estragado, ele só me deu a opção de devolver o relógio para a China mas não me mandou os números de documentos necessários. Vou tentar arrumar no Brasil para eu não perder o relógio que nunca foi usado. A peça que quebrou foi a roda de escape. Eu preciso de uma roda dessa ou um movimento completo para comprar. Alguém pode me ajudar indicando onde comprar ? Relógio VSF do último modelo


r/RepTimeServices • • 16h ago

Services ISO Vancouver Island Watchmaker

3 Upvotes

Any watchmakers on Vancouver Island that will pressure test and waterproof a rep sub? Could travel to Vancouver but would prefer the Island.


r/RepTimeServices • • 16h ago

Services Watchmakers in the Bay Area

6 Upvotes

Are there any watchmakers in the Bay Area that are willing to service/regulate a VSF 15510?


r/RepTimeServices • • 20h ago

Advice Explorer II bezel?

1 Upvotes

Anyone know what tool to use to get off the bezel off a Explorer II? It´s nothing like Datejust or OP they are easy to get off.


r/RepTimeServices • • 1d ago

Advice Any watchmakers want to help?

Thumbnail
gallery
2 Upvotes

The dial of my Miyota 8285 build keeps on scratching. As a new watch assembler (first build) I can’t figure out why. Three dials have been ruined already. Am I pushing the hour hand too much? The circular scratches further out were from a previous attempt, I now just need to fix the inner scratches.


r/RepTimeServices • • 1d ago

Advice QC – Rolex Submariner – Première réplique

Thumbnail
gallery
3 Upvotes

Salut à tous !
C’est ma première réplique et j’aimerais avoir votre avis sur ce QC avant de prendre ma décision.
J’ai regardé les photos de mon côté et, dans l’ensemble, la montre me semble plutôt propre. Mais je débute dans ce domaine et je préfère avoir l’avis de personnes plus expérimentées pour être sûr de ne rien louper.
J’ai essayé de faire une analyse de côté je vous met l’ensemble des éléments :

Vendeur : Geektime
Usine : VSF
Modèle : Rolex Submariner 124060 No Date
Alignement des index : Les index me semblent plutôt bien alignés dans l’ensemble. Je n’ai pas remarqué de défaut particulier, mais j’aimerais surtout avoir votre avis sur ceux de 6 et 9 heures
Impression du cadran : Le cadran me semble propre. Le logo et les inscriptions paraissent bien positionnés
Alignement des aiguilles : Rien de particulier ne m’a sauté aux yeux
Lunette : Elle me semble plutôt bien réalisée. J’aimerais notamment avoir votre avis sur l’alignement du triangle à 12 heures et des graduations
SEL : Le bracelet semble bien ajusté au boîtier, mais je ne suis pas forcément le mieux placé pour juger les éventuels espaces. Est-ce que quelque chose vous interpelle ?

J’ai également regardé le rehaut, la couronne, le boîtier, le bracelet, le fermoir et la luminescence. À première vue, rien ne m’a particulièrement interpellé, mais je suis preneur de vos remarques si vous voyez quelque chose que j’aurais manqué.

Merci d’avance à tous ceux qui prendront le temps de regarder les photos et de me donner leur avis !


r/RepTimeServices • • 1d ago

Advice zf 15450, gear came undone

Thumbnail
gallery
6 Upvotes

it seems a small gold color gear has came undone in my watch, i plan to try and repair this myself. does anyone have an idea of where this gear could come from, what orientation it is supposed to be in, and how to securely reattach it?

the watch still winds and runs without fail, but of course the rotor doesnt


r/RepTimeServices • • 1d ago

Advice Tube and Crown replacement for ARF 16610

Post image
2 Upvotes

The stock tube and crown are very rough. I am looking for a replacement. Do I need to go for Gen? Is there a smooth aftermarket replacement pair?


r/RepTimeServices • • 1d ago

Request Looking for repair work.

2 Upvotes

My VSF deepsea took a dump, when I try to wind it, it feels like it’s been wound to the max point and doesn’t hold any power. Please be reputable I’m not sending it to unknown people. (Learned my lesson last time 😅)


r/RepTimeServices • • 1d ago

Advice Tudor BB58 GMT Movement doa

2 Upvotes

Just got my first rep and it seems broken right out of the box. I tried setting the time and this is what happens.

https://streamable.com/28fwhi

https://storage.to/54McZaoJO

I took it out of the packaging and wound it, I set the date hands to 6:30 and adjusted the date to the 15th and then moved the hands clockwise through midnight to the 16th.

When I woke up today, it was not changed to the 17th, When I tried advancing the hands again, the date changed to the 17th at 3:14 instead of midnight.

The crown then developed resistance and hit a hard stop at 7:56. The seconds hand also stopped.

Bought from mirotime, what are my options. (Yes I contacted them, but haven't heard back yet)

It has the 2836 gmt movement in it. I literally just got it last night, ugh.

Is this fixable? Are there any contacts to service in the GTA? I saw renown watch services in Whitby is very close to where I live, I will reach out to them tonight just to get an idea of how much it might cost.

I really dont want to ship this back to china.... but if I need to send it back, what are the issues with that?


r/RepTimeServices • • 1d ago

Request BVF Santos Large Help

Thumbnail
gallery
2 Upvotes

Hello Folks!

I recently got BVF Cartier Santos Large model with these mods installed:

  • Gen Blue Dial.
  • Correct Flat Screws Heads for the bezel.
  • Correct Date Wheel Font.

The watch is brand new. Bracelet and case were fully stickered as it came from BVF.

Watch looks stunning. However, I have these issue that is not letting me wear the watch.

Issue:

  • With slightly move Rotor sound and feels very loud.
  • When I wind the watch, my fingers hurt, there is a noticeable resistance feel when I wind or trying to set the time.
  • Bracelet edges feel very sharp, and the bracelet when I removed the sticker looks pale!

My research for the solution is to do these fixes/services

Silence the rotor. Some recommend not silencing and go without the automatic movement and wind the watch manually.

Light chamfering brush/polish the bracelet edges and case can improve the look and feel of the watch miles.

Crown winding, I'm not quite sure if that BVF stock issue when you try to wind the watch. I believe the movement in my Santos are Miyota 9015. I also heard that some BVF Batches comes with fake Miyota. Thus, Replacing the movement might solve the problem?

If anyone have a lead on someone can do these service to the watch, I would greatly appreciate it.

Also, does anyone with stock BVF Santos Large feels crown resistance when trying to winding/set the time?

Thanks!


r/RepTimeServices • • 1d ago

Advice Cyclops / Crystal Upgrade

Thumbnail
gallery
4 Upvotes

Bought this watch Factory unknown (clasp code and serial number align to clean but aware it’s probably fake) and generally very happy except for DW and cyclops. Are there any trusted watchmakers in the UK who can do an upgrade and how much approx? I have a ZF Skydweller and the DW is far clearer and without the blue tint (photo added for reference). I’ve searched and heard mentions of Watch mods and awaiting a response, any others?


r/RepTimeServices • • 1d ago

Advice Need Help with Clean Factory 124060

Post image
5 Upvotes

Hey guys,

I'm ready to throw the towel in on trying to fix my friend's Subby.

It all started when the lume pip on the bezel fell off. I tried gluing in a replacement but that didn't hold.

Since then, I've ordered a generic Amazon bezel insert as well as a $100 bezel insert labeled "Clean VS ARF" insert from aliexpress and I snapped it in half trying to put it on the bezel.

At this point I'm ready to ask for help from you guys. Any recommendations for servicing or should I just ordered a new watch?


r/RepTimeServices • • 1d ago

Services Where could I find high quality plating/bonding options

1 Upvotes

I’ve got a clean factory yacht master 40 chocolate dial, rose gold and stainless but I would like to upgrade the plating/bonding and also change the crystal if anyone could point me in the right direction.


r/RepTimeServices • • 1d ago

Question Does ZF AP 15450 have rubber o ring at the back?

Post image
2 Upvotes

So my watch was regulated before sending out to me. I received it and it was out of whack anyway so I opened it to regulate myself. I was also planning to grease the ring at the back, but noticed there wasn’t one.

I looked and it doesn’t seem like there’s any grooves for one. So is there supposed to be to be one?

Did my seller forgot to put it back in when regulating?

If there is supposed to be to be one, what size should it be?

TIA.


r/RepTimeServices • • 2d ago

Services Frank Rolex Datejust II 41 VSF

Thumbnail
gallery
7 Upvotes

Today we decided to assemble a "Franken" watch based on a VSF Rolex Datejust II 41. We installed genuine gold hands and a genuine bezel. Prior to this, a "Deep" crystal had been fitted, and the edges of the Jubilee bracelet were chamfered.


r/RepTimeServices • • 2d ago

Services Assembly Vintage Rolex Datejust 16200

Thumbnail
gallery
6 Upvotes

A very interesting build, featuring an original bracelet. It is also equipped with a movement that boasts superb finishing—the 3135, which I have already written about.