r/SewingForBeginners • • 6h ago

My second attempt at upcycling :)

Post image
106 Upvotes

This was from an old office pant that I accidentally burned a hole in the middle while ironingšŸ˜…

I think it would look neater when the pleats are ironed and I didn’t have enough fabric to make bigger arm sleeves but it turned out okay😊


r/SewingForBeginners • • 13h ago

First large sewing project done. Roughcut Industrial Tote

Thumbnail
gallery
92 Upvotes

Learned quite a lot doing this, most importantly that quilting fabric sucks and that the fabric used in cheap canvas drop cloths will easily fray through half an inch of seam allowance, but I have a nice laundry bag until the fabric gives out. I used the Industrial Tote pattern from Roughcut patterns.


r/SewingForBeginners • • 20h ago

first ever sewing machine šŸ¤“!

Thumbnail
gallery
48 Upvotes

hey guys, i found this sewing machine at goodwill on sunday! i been wanting to learn how to sew for the longest time so when i saw it was only $30 i had to buy it. i’m excited i haven’t started using it yet bc it’s been a busy week for me but hopefully i can soon. what do you guys recommend i buy to get started?


r/SewingForBeginners • • 11h ago

I would like to create patchwork clothes, but how do I tackle this?

Thumbnail
gallery
16 Upvotes

Here's a few example I found on interest. Obviously these kind of clothes take a lot of different fabrics. Should I buy fabric scraps second hand for this? And what kind of fabrics should I look out for? I've seen a few people use quilting fabrics, which are a very stiff fabric. Could I also use other kinds of fabrics for this? :) Maybe someone knows a way you could use Jersey without making it too stretchy? Because I'm seeing a lot of printed jersey, but am afraid it would make the overall fit wonky if some of the fabric stretches.

And would it be better to use a base layer for some of the patchwork or is it not required? I think I've read some people use interfacing, or dissolvable interface fabric. I want to maybe start practice with some bags, but not make the clothes too stiff once I start on that.

I already managed to buy a whole quilting set from someone with some amazing fabrics for cheap, so I'm definitely going to work with that. But I don't want to spend an arm and a leg on meters of different kind of fabric.

I've also seen some people buy fabric bundles from places like aliexpress but I'm kinda worried about the quality of it.

Thanks in advance!


r/SewingForBeginners • • 17h ago

Need some advice for my very first sewing machine

Thumbnail
gallery
10 Upvotes

Hi,

I am in Canada Ottawa, I been looking for a decent machine for a while. And happened to see Brother is on sale and it just fits into my budget that about $200. Any opinion on Brother machines?

I also checked FB marketplace. machines for sale around me either cost about the same or too old, or sold as is (the $120 Brother)🄲.

any thoughts?


r/SewingForBeginners • • 20h ago

Beginning questions

9 Upvotes

Hello! I’ve used a sewing machine before, but not very much, so I’d consider myself a beginner. I want to start making jeans, jackets, and clothes for myself. I know people say you shouldn’t start with projects like that, but I’m very patient and don’t mind trial and error. Do you think starting with more challenging projects will help me progress in the long run, or is it a bad move?


r/SewingForBeginners • • 19h ago

Advice for sewing machine yard sale

6 Upvotes

Hello all! I’ve been repairing and selling sewing machines locally for a little over a year now (New Orleans Metro area), and I’m planning a sewing machine yard sale for early December. I’d love to hear feedback about what you all think while I’m figuring out the details.

I’ll have about 20 fully serviced machines (depending on sales and acquisitions between now and then), ranging from $80 to $1,000. There’ll be a mix of vintage and newer machines from several brands, including some sergers and embroidery machines. I plan to have every machine set up and threaded so I can show how it sews.

I’m hoping to sell some machines and also get to know more folks in the local community who might need their own machines serviced down the road.

As this is a group of mostly new sewers, would you come to a sale like this? Would seeing the machines sew in person help you decide? I’m also curious what would catch your eye on Facebook in a local city group. Would you want to see photos with model names and prices, short videos of the machines sewing, or something else?

I’d appreciate any ideas or feedback.


r/SewingForBeginners • • 38m ago

Book cozies!

Thumbnail
gallery
5 Upvotes

I am gearing up for the holidays and thought I’d share these adorable quilted book cozies I recently made!


r/SewingForBeginners • • 23h ago

Best cheap beginner sewing machine?

4 Upvotes

I'm really sorry if this is a repetitive question.

Upon finding these sorts of posts, I can only find others suggesting very expensive products. Is there anything under 100 dollars? I cannot afford anything above. I am open to used machines but I don't know many of these products and even many of these used ones seem to be above 100. Thank you for reading.


r/SewingForBeginners • • 1h ago

Securing hand-sewn patchwork for washing machine?

Thumbnail
gallery
3 Upvotes

I’m doing my first lil sewing project for gifts for my bachelorette guests. I’m hand sewing cutout fabric letters. So far I’ve used FrayCheck which has helped me out, and my stitches have been good I think n I’ve done good at securing them with my finishing knots.
Now I’m wondering what I should do to secure everything in place to withstand the wash. Maybe I’m being overly ambitious but I don’t wanna give people a high maintenance gift. I was gonna for sure recommend the shirt is washed inside out on delicate and probably just air dried.
But any other recommendations to add?
Thanks!


r/SewingForBeginners • • 4h ago

Wide ribcage/large underbust fitting

3 Upvotes

Hi! I’ve been sewing for a few years but am just now learning how to fit and make adjustments.

I’ve been trying to figure out why all of my fitted clothes come out too tight in the chest even though I am using the correct bust measurement, or sometimes a size up, and I’ve realized it’s because I have a very wide ribcage and underbust. I do have a full bust, technically, but I think that’s because ribcage gets super wide there rather than because I have boobs in the front.

There are a lot of resources out there for full busts, but adding darts or fullness in the front I feel like doesn’t necessarily help me because all the width there is on the sides.

Are there any resources or fitting methods for this issue??

Is it easier to make two or three sizes up, then dramatically reduce the waist??


r/SewingForBeginners • • 16h ago

Managed to win a floor model bernette b64 on ebay, what would you do with your first serger?

3 Upvotes

Im lowkey really proud of scoring a floor model air serger for 600 (it would have been less if it wasn't for the insane biddinf war) after dealing with my grandmothers vintage brother serger that was such a PITA to thread and use that I gave up on it.

I use the over cast stitch on my Juki f400 a ton so I'm excited to actually try serging properly again. What projects would you do first with a new serger (apparel!)?


r/SewingForBeginners • • 17h ago

Pressing pinned pleats

3 Upvotes

Hi! I learned recently how to pleat, and I have them pinned in place and am going to sew them but I am confused on if I should sew them first or press them. Most of the confusion comes from the fact that you can’t iron over pins, so should I sew first? Do people generally press seams when they’re in the pinning stage or just sew them?

(P.S Thank you to everyone who responded to my last post asking for help. I have gotten much better at understanding sewing and now understand how incoherent my question was but you guys helped so much!)


r/SewingForBeginners • • 2h ago

A Panda Hoodie from Pyjamas!

Thumbnail
gallery
2 Upvotes

Hii! I’m currently thinking about making a hoodie from my old pyjama set (1 top and 2 bottoms).

Currently I’ve made new sleeves from the first pair of pants. The actual body part already fits somewhat well, but I’ve been thinking about widening it with the original sleeves or perhaps with the other pair of pants. However I’m not really sure if it’s worth the hassle of four side seams and ribbing (i’m not even sure if I have to detach it completetly not).

Other than this I was also planning on attaching a zipper (the body’s panda side will be on the back!), making a hood of course and perhaps a kangaroo pocket (if I even have any more fabric at that point :D).

I think what I’m asking is just if you think the struggle of widening the body is not worth it for a beginner. Other than that you can just vibe with the pandas🐼🐼 :)!


r/SewingForBeginners • • 3h ago

Washing multiple pieces of colored cotton fabrics

Post image
2 Upvotes

I bought and have a bunch of cotton fabrics that need to be washed prior to sewing but I am afraid of color bleeding.

I am planning on using Shout Color Catcher and washing them all together.

Has anyone used that with success? What are your methods?


r/SewingForBeginners • • 7h ago

pattern confusion, please help?

Thumbnail
gallery
2 Upvotes

first time trying a pattern like this (have previously made smaller things like wallets and bags, and altered clothing, but not made clothes from scratch before) and trying to work out the layout for the interfacing, but run into some confusion about numbers and pieces? looking at the layout, it's wanting two different number one pieces, the actual number 1 and another with a similar shape to 15, but with a pointed end instead of the flatter one on 15?

my only guess would be potentially disregard as theres mention of a piece 1a in the larger sized patterns? but that also states to attach those and cut as one, and is only for sizings 46-52, and i have 38-44 (making 44 as its for my partner, he measures 42 but being a coat, might want jumper room underneath, and can always take it in a lil, but harder to add fabric than take it off?)

any help would be greatly appreciated as I really wanna get this right, and have run into confusion before ive even began šŸ˜… I know its probably a bit of a big project for a first, but he wants it for Christmas so not much time to practice elsewhere 😭


r/SewingForBeginners • • 29m ago

Paid freelance sewing gig, NYC! Starting a mail-in clothing alteration/upcycling service for women. Looking for a sewer or fashion student for flexible, steady work, paid per order with a paid trial first. Send photos of your work + turnaround time. Message me for details!

Thumbnail reddit.com
1 Upvotes

r/SewingForBeginners • • 50m ago

Which Janome machine do I buy?

1 Upvotes

Hi! I looked through the sub and read several 'which machine do I buy' posts but I feel like I know even less now lol. Basically, I am a complete beginner in machine sewing - I sewed one stitch on my partner's mother's machine and that's it. I want my own machine but I am completely lost as to which one do I choose (or rather: which one do I request for christmas).

I *think* I narrowed the brand to Janome (as I gathered here, new Singers are not good, Juki machines are not easily accessible here and for some reason I just don't want a Brother - I don't know why, some sort of intuition just tells me 'don't').

Here's where the problem starts: I have no idea which model I should be looking at. What types of stitches do I need if I'm planning on sewing some basic clothes (my partner has it in his head that one day I will be good enough to sew him a suit from scratch lmao - I don't believe this day will ever come but for the sake of narrowing 'clothes' down you can assume this will be the most complicated thing I will ever attempt). I don't foresee sewing denim or leather so heavy duty is not a must, but if there's something that is generally good and can handle heavy fabrics on top of that I will not complain.

Also, do I need automatic needle threading? Are there any additional functions I should look for? And what is rotary hook vs oscillating hook - and which one should I be looking at?

Please, help a sis out here!

Additional context: I was considering buying the same machine that my partner's mother has (since it would be nice to have someone to help me learn it) but that one is a vintage Polish one from a brand Łucznik (I think it's from the 80s, maybe even older) - since she got it, the brand got sold to a Chinese corporation and has apparently, according to Polish seamstresses from the Internet, turned totally useless, so that's a no-go. And since I'm requesting this for Christmas I want to go for a new one instead of refurbished vintage - it's easier to find and buy and I don't want to cause too much of a hassle for the person getting it for me.


r/SewingForBeginners • • 2h ago

Looking for a beginner serger, preferably under $300

Thumbnail reddit.com
1 Upvotes

r/SewingForBeginners • • 5h ago

need help choosing fabric for baby blanket

1 Upvotes

what it says on the title! i’m looking to sew a baby blanket for my friend and don’t know what kind of fabric to get. we live in a place where it can get extremely cold in the winter and fairly hot in the summer, so i’m unsure whether to go for breathability or insulation (or if i should splurge on wool for both*, or if that’s even worth it for a piece that will have to be washed frequently if it is used). all i do know is that i should avoid heavily dyed fabrics for allergy reasons. any advice appreciated šŸ™

*assuming that’s what wool does. i could have learned wrong!


r/SewingForBeginners • • 6h ago

Black Friday sales

Thumbnail reddit.com
1 Upvotes

r/SewingForBeginners • • 10h ago

Acquired an old Singer 9020 - top thread tension issue?

Post image
1 Upvotes

I’m very very green, so it could be user error but the bobbin thread / bottom side of the stitch (terminology?) has loops in it.

My understanding is that this means the top thread doesn’t have enough tension.

I have the manual and I can’t seem to figure out how to adjust the tension. Anyone know? I’m thinking it’s the knob right under the easy threading path but in the manual it actually doesn’t say what that one does, almost like they missed it in the diagram.


r/SewingForBeginners • • 12h ago

Pfaf Varimatic 6087 ou Edna Club computer

Thumbnail reddit.com
1 Upvotes

r/SewingForBeginners • • 17h ago

Hemming Children’s Clothes

1 Upvotes

I’m having trouble hemming my daughter’s pants. She’s five, so obviously I’m dealing with a very narrow pant leg. Im able to fold it once, but I’m struggling a lot with folding the raw edge under the hem in a manner that is consistent and neat. I’m considering finishing the raw edge with either an overcast stitch or my serger, and then folding it up only once. Does this seem like a reasonable work around? Edit: I am ironing, but when the seam is only half an inch to math children’s paints, it’s hard to then fold the excess under.