r/SolarUK • • 8h ago

HELP / ADVICE Gateway Price

1 Upvotes

Hello,

I have been enquiring with my installer about installing an additional battery and a gateway to my existing setup. I was told about two weeks ago the price had gone up from when we enquired when the system was being fitted from £1250 to £1500 to have it installed now.

I was fine with this as I can understand them coming back out etc. However I received another email today stating there is a shortage in the UK (which I knew anyway from this subreddit a few weeks back) but have been told that due to this delay and shortage the prices have raised significantly. Am I just about to be ripped off here because of a shortage? Not sure how from two weeks ago it can go up significantly when the shortage has been here for a few weeks longer. They haven’t given a price yet but significantly is probably going to alot more…


r/SolarUK • • 3h ago

DISCUSSION It's renewal time currently e.on next drive fixed @ 3.80p OP where to next?It's

1 Upvotes

We have solar 96kWh batteries a large ASHP and an EV soon to be 2 EV's pretty common for us to import 80+kWh a night.

Our current provider is E.ON Next.

Next Drive Fixed V12

Fixed term ends 18/12/2026

12AM - 6AM 3.80 p/kWh

6AM - 12AM 27.48 p/kWh

Standing charge 57.14 p/day

Our current provider wants us to lock into the next version of their EV tariff V37 with over a 60% increase in cost.

Their offers are:

Smart EV Tariff - Next Drive Smart v8.0

Daily standing charge 57.14p /day
Unit rate 33.60p /kWh Peak (6am - Midnight) 6.50p /kWh Off Peak (Midnight - 6am)

Off Peak increase 2.7p Per kWh. Daily increase @ 80kWh import 2.16 per day 788.40 PA

Standard EV Tariff - Next Drive Fixed v37

Daily standing charge 57.14p /day
Unit rate 34.45p /kWh Peak (6am - Midnight) 8.50p /kWh Off Peak (Midnight - 6am)

Off Peak increase 2.8p Per kWh. Daily increase @ 80kWh import 3.76 per day 1,372.4 PA

What are your suggestions for the next tariff, we are in planning for a 22kWp array that should help massively. Our export mpan is just coming through in a few weeks.

We have a 10kW export connection and export nothing at present.

Answers on a postcard 😄 Is it really E.ON or EDF, or are there others that may work out better now that Octo..... took away the agile export.

Separate question: we want to upgrade our old EV plug in charger. But want a future-proof charger that has:

Single Phase (7kW) with the potential of 3 phase (22kW) in a single unit for the future.
Ideally a tethered unit.
Built-in PEN protection
Direct-connect CT (No external stuff simple hardwired CT)
Potential for direct control over wifi (we are big HA users with a lot of automation) Modbus/Websocket/occp/api whatever (No provider cloud lock in)
Future-proof protocol support ISO 15118 (V2G/Plug & Charge), user configurable occp 1.6J/2.0, Offline local control
We will wire it with Doncaster EV Ultra 5 core plus data in single phase initially.

What are your real-world experiences and suggestions for the EV charger that ticks all the boxes without breaking the bank?

We are considering a Zaptec GO multiphase unit.

Any other suggestions welcome.

Cheers


r/SolarUK • • 12h ago

SHOW YOUR SETUP My new Sig system

Thumbnail
gallery
50 Upvotes

Thought I’d share some photos of my new solar installation, I’m based in Essex. I’ll add some better pics when I’m back in the day time.

The setup:
24 × AIKO solar panels
11.76kW total generation capacity
2 × Sigenergy BAT 10 batteries (~18kWh storage)
10kW Sigenergy inverter
Sigenergy EV DC charger

Really pleased with how everything has turned out, particularly the quality of the installation. The electricians have done a fantastic job – all the conduit runs are in nice, straight lines, everything is really neat and tidy, and you can tell they’ve taken their time to get things right rather than rushing the job.

A big recommendation for Creative Low Carbon, based in Kent. Really happy with their work and would definitely recommend them.
Now comes the fun part… fiddling around with the app, getting everything set up how I want it and sorting out a new electricity tariff.

What do you guys think? Any tips for getting the most out of the Sigenergy setup?

Happy to answer any questions about the installation or equipment.


r/SolarUK • • 14h ago

HELP / ADVICE Porch solar.

Post image
149 Upvotes

Has anyone fitted panels on a front porch similar to the photo?

I've got a east west roof so want to try and maximise generation through out the day while going as low cost as I can. Not sure if my idea is possible though?


r/SolarUK • • 8h ago

QUOTE CHECK Quote check (newbie) - North East

1 Upvotes

I have obtained a few quotes over the years and they all seem to end up about the same price, although I'm not sure on exactly the best products are.

I'm near Newcastle in the North East and the costco deals look alright to me but would appreciate an experienced head looking at it.

The quote is from Fresh Solar UK but bought through Costco. I think the warranties to to manufacturer or Fresh Solar for the workmanship one.

Annual usage for me is 8500kWh

We have an EV but just on a fixed octopus energy deal and conscious of upcoming price increases.

Estimated performance from the installers is 6441kWh and estimates I'll be making £1.6k savings per year. Around 6 year payback with inflation benefit increasing on the savings achievable.

Electric box is currently single phase and I have an Ohme charger.

I will move to an overnight EV tariff to make best use of the battery system once installed.

See quote below:

Given the information provided, my recommendation is for the following   photovoltaic plus Battery system ,

16  x  Sunpower  Maxeon   490w   Bifacial   Black Solar panels .  7 on the pitched roof and 4 on the flat.

Full Bird Guard in Black 

1 x Fox ESS  6kw  Gen 2 Hybrid Inverter

1 x Fox EP12 11.5kw Storage Battery with internal heating, and fire protection.  (Can be sited outside)

1 x Fox Premier component kit

1 x Fox V2 remote app  (system compatible with all low night rate tariffs)

1 x sides scaffolding

MCS certification, enables you to sell back unused power to the grid.

HIES financial protection against seller insolvency

EPVS  validation of generation figures

Fit, Test and commission the system, includes removal of existing panels.

Warranties;

Panels 40 years

Inverter  15 years

Battery 10 years

Workmanship 5 years

£10688.00 vat exempt 


r/SolarUK • • 14h ago

HELP / ADVICE Solar battery placement. Ignoring space between entrance/exit door way rule?

7 Upvotes

Reposting as I missed a detail and it was too wordy, I think.

My solar installer is suggesting we place a 20kw Fox stackable battery kit, immediately beside my back garden door, externally.

If the rule is broken related to batteries not being allowed within 1 meter of a doorway, what problems do I face immediately/in the future?

I suggested it be installed outside in my front garden, where the 1m wall is satisfied, but they're reluctant to do so due to my air to air heat pump being situated out there.

When I pushed, stating I don't think the warm air from it would negatively impact the battery, the install organiser said its due to the refrigerant lines. They will need to work around these lines in the attic space anyway when the solar panels are installed, as they will definitely need to run the power cables for the panels (and potentially the battery & inverter as well) up the same side of the exterior front wall where the conduit cased refrigerant lines are already running.


r/SolarUK • • 15h ago

HELP / ADVICE Modbus / HA , should I take it into account when getting a solar / battery system?

3 Upvotes

I’m considering a solar and battery system , probably fox ess and have barn quoted for a Fox ESS KH 7kW inverter. I keep seeing mention in here of modbus and HA and am beginning to wonder how much I should factor in compatibility with things like that in my decision what to go for. So in a nutshell can someone please explain what I would be missing if I ignored modbus / HA? I believe this suggested inverter isn’t ideal for modbus as it involves some tricky wiring, what’s a better option that makes modbus / HA easier in the fox ecosystem? I guess most people don’t worry about all this stuff and just get a system installed and use the battery manufacturers app to control things but if modbus gives more flexibility it might be worth taking it into account.

Cheers