r/Tapo • • 19d ago

New Feature New Voltage and Current Monitoring for Tapo Plugs! What are You Monitoring in Your Home?

Post image
17 Upvotes

Recent updates to a few smart plugs and our smart outlets have expanded their energy monitoring capabilities to include two new data points: Voltage and Current!

Learn More and View Current Compatibility: Voltage and Current Data Now Added to Tapo Smart Plugs and Outlets

While compatibility is limited and the feature is just starting to roll out to models, we look forward to seeing it added to additional models in the future. Keep an eye on your device's firmware updates and catch up on the latest additions every month in our monthly update review!

What Will You Use the New Energy Monitoring Values to Monitor?

What Model Do You Want to See the Feature Added to Next?


r/Tapo • • 29d ago

New Feature Say Goodbye to Resets: Online Wi-Fi Switching for Tapo Cameras - First Models Supported

80 Upvotes

Your requests have been heard! The ability to switch your camera’s active Wi-Fi network from the Tapo App is beginning to arrive for select models! 

New Switch Wi-Fi Menu Option for Available Models

Whether you're upgrading your router, adding an IoT 2.4GHz network, or simply want a stronger Wi‑Fi connection for your cameras, Online Wi‑Fi Switching lets you update a supported camera's network connection without climbing a ladder or resetting the device. 

Learn More in our Community Post:

Say Goodbye to Resets: Online Wi-Fi Switching Is Arriving for Tapo Cameras 

Note: Much like the upcoming ‘Snooze Notification’ feature, this feature is only just now starting to roll out, and it can be expected to be some time before we see widespread compatibility. Currently, compatibility is limited to the C615Fv1, C465v1, and C465Dv1. Keep an eye out for any future firmware updates!

Which model do you want to see this feature added to next? 


r/Tapo • • 3h ago

Need Advice Tapo P100 (AU/1.2

1 Upvotes

Bought the 2 pack yesterday but the Tapo app is unable to find any of them (connected at different times) it appears that the app wants to connect via Bluetooth but the devices are only broadcasting wifi signals.

I contacted tolink support they said devices are faulty. Is that even possible for 2 devices to act the same way? I even tried 2 different iPhones and factory reset.

When I connect to the p100 wifi I can visit the 192.168 address and I get “200 ok” but that’s about it.

Any thoughts on this would be appreciated


r/Tapo • • 6h ago

Troubleshooting and Support Cameras have bad detection?

Thumbnail
gallery
1 Upvotes

I have my C110 camera facing my entire front yard, road to door from a high up angle. Motion detection and person detection sensitivity are both set to 10. Full screen recording zone.

Sometimes, it will record a car arriving, but will not record the car leaving the property. The car is there approximately 2-3 minutes at most. What’s going on?

I’m using the latest firmware.


r/Tapo • • 10h ago

Need Advice Fixture for Tapo bulbs

1 Upvotes

I would like to do a wall wash using Tapo bulbs… any suggestions for a good fixture? I am trying to create an Oasis Ambient aesthetic with Tapo bulbs.


r/Tapo • • 11h ago

3rd Party Integrations Tapo Skill unavailable to me in the Alexa app.

Post image
1 Upvotes

Is the Tapo Skill still available in the Alexa app for everyone to disable and enable?

Instead, I used the Tapo app third party feature to unlink and link the Skill. It's still a bit concerning though.


r/Tapo • • 19h ago

Need Advice Is somebody else having issue with thermostat (KE100) and sensors (T315). Normally the sensors sync the temperature and the thermostat increase/decrease the room temperature. The connection breaks continuously and thermostat is using in-built temperature measure system.

2 Upvotes

r/Tapo • • 1d ago

Troubleshooting and Support India cctv cameras not available

3 Upvotes

Any update on the CCTV camera back in stock?


r/Tapo • • 1d ago

Troubleshooting and Support Tapo Customer Service Has Been Horrible. I give up.

17 Upvotes

Two weeks ago I posted in this sub with the title, "How to get to a higher level of Tapo Care Support?"

Carl responded and then behind the scenes he helped me. Carl was fine.

But it seems the left hand doesn't know what the right hand is doing at TP-Link.

Two weeks later they are saying, we told you to cancel service and re-enroll. Yes, but didn't you see all the other back and forth and the concern that this would not solve the issue? Before canceling, I tried to work with Tapo to figure out what was going on and then would have canceled and re-enrolled if that really were the best way to go about it. But, there has been no discussion. It's just been a mess.

And I am not sure what to believe about Apple payments but Tapo says they can't really see what's going on and they need screen shots from me to show them the details. However, Carl seemed to have no problem at least seeing the date I started a free subscription and the date I converted to a paid subscription.

Anyway, not any closer to resolving this issue since I think October 4. Could be October 6.

I give up and will just cancel my account. Good thing my approach was to purchase a couple cheap cameras and give the service a try before fully committing.

P.S. - I want to say that everyone in customer service has been nice. But nice doesn't get the job done. A well organized and trained department that communicates with each other is needed to get the job done.


r/Tapo • • 1d ago

Troubleshooting and Support [SOLUÇÃO / SOLUTION] Como trocar o Wi-Fi das câmeras Tapo sem RESET físico / How to Change Tapo Camera Wi-Fi Without Physical Reset

9 Upvotes

PORTUGUÊS 🇧🇷

Depois de tentar várias vezes trocar a rede Wi-Fi das minhas câmeras Tapo C113, finalmente encontrei uma solução que pode ajudar outras pessoas, principalmente quem tem câmeras instaladas em locais de difícil acesso.

O PROBLEMA:

Mesmo segurando o botão RESET físico por 10 segundos, a câmera reiniciava, mas continuava conectando automaticamente à rede Wi-Fi antiga. Não sei exatamente por que isso acontecia, mas o reset aparentemente não apagava completamente as configurações anteriores.

A SOLUÇÃO QUE FUNCIONOU PARA MIM:

  1. Abra o aplicativo Tapo e remova a câmera pelo próprio aplicativo.
  2. A câmera será reiniciada e ficará disponível para uma nova configuração.
  3. Ao adicionar uma câmera, o aplicativo oferece duas maneiras de encontrá-la: busca automática por dispositivos próximos ou seleção manual do modelo específico na lista.
  4. Na primeira câmera, escolha a seleção manual pelo modelo!
  5. Dessa forma, o aplicativo solicitará que você se conecte à rede Wi-Fi temporária criada pela própria câmera.
  6. Depois dessa conexão, será possível escolher manualmente a nova rede Wi-Fi.
  7. Selecione a rede desejada e marque a opção para salvar as informações da rede.

E AQUI VEM A PARTE INTERESSANTE!

Depois de configurar a primeira câmera dessa maneira, a nova rede Wi-Fi fica salva no aplicativo Tapo.

Isso significa que, nas próximas câmeras, você pode simplesmente remover a câmera pelo aplicativo e adicioná-la novamente utilizando a busca automática por dispositivos próximos.

O aplicativo poderá utilizar a nova rede Wi-Fi que você salvou anteriormente, sem precisar repetir toda a seleção manual.

POR QUE ISSO É ÚTIL?

Tenho duas câmeras instaladas em um teto bastante alto. Para acessar fisicamente o botão RESET, precisaria pegar uma escada e alcançar cada uma delas.

Com esse procedimento, consegui realizar a troca de rede sem precisar tocar fisicamente nas câmeras!

ATENÇÃO:

Infelizmente, remover as câmeras do aplicativo exige configurá-las novamente, incluindo as preferências que forem perdidas no processo. Mas pelo menos evita o trabalho de acessar fisicamente cada equipamento.

Testei esse procedimento nas minhas Tapo C113. Não posso garantir que funcione exatamente da mesma maneira em todos os modelos, mas vale a tentativa.

Espero que ajude outras pessoas que estejam passando pelo mesmo problema!

Agora só falta a TP-Link implementar uma opção simples de alterar a rede Wi-Fi diretamente nas configurações da câmera, sem precisar remover e adicionar tudo novamente. Seria muito mais prático!

ENGLISH 🇺🇸

After several frustrating attempts to change the Wi-Fi network on my Tapo C113 cameras, I finally found a workaround that might help others, especially those with cameras mounted in hard-to-reach places.

THE PROBLEM:

Even after holding the physical RESET button for 10 seconds, my camera would restart and automatically reconnect to the old Wi-Fi network.

I'm not sure why this happened, but the physical reset apparently wasn't completely clearing the previous Wi-Fi settings.

HERE'S WHAT WORKED FOR ME:

  1. Open the Tapo app and remove the camera directly from the app.
  2. The camera will restart and become available for setup again.
  3. When adding a camera, the app offers two ways to find it: automatic discovery of nearby devices or manual selection of your specific camera model from the list.
  4. For the first camera, choose manual selection by model!
  5. The app will ask you to connect to the camera's temporary Wi-Fi network.
  6. Once connected, you'll be able to manually select a different Wi-Fi network.
  7. Choose your new network and make sure to enable the option to save the Wi-Fi credentials.

HERE'S THE INTERESTING PART!

After setting up the first camera this way, the new Wi-Fi network is saved in the Tapo app.

For your remaining cameras, you can simply remove each camera through the Tapo app and add it again using automatic discovery.

The app can now use the newly saved Wi-Fi network instead of the old one, without requiring you to manually select the network again.

WHY IS THIS USEFUL?

I have two cameras mounted very high up on the ceiling. Physically pressing their RESET buttons would require a ladder.

Using this workaround, I was able to change their Wi-Fi networks without physically touching the cameras!

IMPORTANT:

Unfortunately, removing a camera from the app means you'll have to set it up again, including any settings or preferences lost during the process. However, this is still much easier than physically accessing every camera.

I tested this on my Tapo C113 cameras. I can't guarantee it works exactly the same way on every Tapo model, but it's definitely worth trying.

Hopefully, this helps anyone struggling with the same issue!

Now we just need TP-Link to implement a proper "Change Wi-Fi Network" option directly in the camera settings, without forcing users to remove and reconfigure their cameras every time.


r/Tapo • • 1d ago

Suggestions + Feedback India cctv cameras not available

Thumbnail reddit.com
1 Upvotes

r/Tapo • • 1d ago

Troubleshooting and Support Presets keep getting added

1 Upvotes

r/Tapo • • 1d ago

Need Advice Rv50 omni

1 Upvotes

Anyone having issues with this hoover mine keeps getting stuck on mops when it tries to undock or dock.


r/Tapo • • 1d ago

Suggestions + Feedback Widget status showing

1 Upvotes

I use a number of Tapo device widgets on my smart home control panel. They work great, but one frustrating thing is the don't show device status (on/off). Many of the things I control from that location are not readily visible, and it's frustrating that I cannot just glance at the device's status. Google Home had this... but Google Home sucks in so many other ways. Is there a way to get them to show status? It seems like a no-brainer that they should visually change to display such a thing. Thanks in advance!


r/Tapo • • 1d ago

Suggestions + Feedback H200´s suddenly came back online after 2 months

3 Upvotes

Hi, I was wondring if anyone else experienced/or what might be the reason that 2 of my 3 Tapo C200´s went offline one ny one 2 months ago, with no clear reason, and yesterday they came back online at the same time. They are all linked to the same wifi, same firmware (afaik) and share the same power. The house they are in, is locked and in a different country than I am. Just puzzled but happy to have them all online again.

Edit: Thats C200s, not H200s..


r/Tapo • • 1d ago

Need Advice Tapo C100… only works locally?

0 Upvotes

Hi! I’m hoping someone can help me figure out what’s wrong with my Tapo C100.

The camera works perfectly when connected to my home Wi-Fi. It detects motion, sends notifications, and registers activity. However, whenever I leave home and try to access the live stream using my iPhone’s cellular data, the screen gets stuck loading and displays:

“This smart device can only be controlled locally.”

I’ve tried my home Wi-Fi, iPhone hotspot, restarting and reconnecting the camera, and updating both the app and firmware. Everything is up to date, but nothing works.

What frustrates me is that neither the product packaging nor the Amazon listing mentioned any restriction on remote access. I specifically purchased this camera to monitor my puppy while I’m at work, and remote live viewing was one of the main reasons I chose it.

Device information:
Model: Tapo C100
Hardware Version: 5.0
Firmware: 1.5.7 Build 260709 Rel.28020n
Phone: iPhone

Has anyone experienced this issue or found a solution? Could this be a firmware, account configuration, or remote-access problem?


r/Tapo • • 1d ago

Need Advice P115 - aggregate energy spending

1 Upvotes

Hi all, I have a variety of P115 with energy monitoring. Is there any way to aggregate the usage data in one single place / graph?


r/Tapo • • 2d ago

Need Advice [UK/Europe] TRVs (radiator valves) that work with Tapo

2 Upvotes

Are there any TRVs that Tapo can "see"? I'd like to be able to turn my boiler on or off depending on whether any TRVs are calling for heat. I have Kasa's but they're specifically not supported which is super weird since they're being sold by Tapo :(


r/Tapo • • 2d ago

Need Advice Tapo C520WS stopped detecting my cat as a pet / Pet detection issue

Post image
3 Upvotes

Hello everyone! I recently bought a Tapo C520WS camera and installed it in the hallway of my house. I set everything up properly, but I am having a strange issue with pet detection.
During the first 10-15 minutes after setup, the camera perfectly detected my cat and neatly logged "pet detection" whenever she walked by. However, after that, it completely stopped recognizing her as an animal out of nowhere.
Now, even though the cat is standing or walking through the hallway, the camera doesn't detect her as a pet at all. It detects humans normally, while sometimes mistaking me for an animal, but it completely fails to detect the cat as a pet. To get any kind of detection for her, I have to turn on general motion detection.
All pet detection settings are turned on and checked. Has anyone experienced a similar problem or knows how this can be fixed? Thanks in advance for the help!


r/Tapo • • 2d ago

Suggestions + Feedback TP-Link Tapo outlets no longer working

Thumbnail reddit.com
0 Upvotes

r/Tapo • • 3d ago

Troubleshooting and Support H500 causing camaras to go offline?

5 Upvotes

So i have had 4 c121 and 1 doorbell, they were working great for 2 years (all the events were recorded 24/7 on their 128gb sd card. Last week i decided to buy the h500 and after i did that, 2 of the camaras go offline often for no reason, i dont even know whats causing them to go offline, but it looks like the h500 caused them to have poor signal and/or just lose power all together (causing them to be offline).Has this happened to anyone?


r/Tapo • • 3d ago

Need Advice Tapp C645D with solar panel over the last month on 24/7 capture

Post image
17 Upvotes

Installed this C645D on my front wall about 22ft from the road with its solar panel on the roof a month ago after charging it to 100%. It’s summer in my country so it’s pointed in the optimal direction and getting plenty of sunlight, close to 10 hours some days. Working mode is set to Power saver and 24/7 Capture is enabled with adaptive capture set to 1s.

Battery usage of 7% on the highest day and solar charge of 8.7% on the worst day, but still steadily losing charge over time?


r/Tapo • • 2d ago

Troubleshooting and Support Tapo wont change me back to legacy subscription, and i lost recording to 9 cameras now. Any help?

0 Upvotes

I have 14 indoor and outdoor Kasa cameras. When i bought the Tapo doorbell camera i also bought their 10 camera subscription, annual subscription for about 100 a year.

I wanted more features so i decided to upgrade a couple weeks ago. Immediately realized that the upgrade isnt really an upgrade. When i wanted to reverse back i realized that my plan does not exist anymore.

I contacted their support via the chat/message feature in the app. They refuse to downgrade me back to the legacy plan.

The new plan only supports Tapo cameras, and i only the doorbell. So basically, i cannot use the whole service now.

Any ideas what i can do besides start contacting the state attorney and consumer protection agency? Is there an actual help that can fix this?


r/Tapo • • 3d ago

Troubleshooting and Support Kl 125 Away Mode

Post image
4 Upvotes

Is this still a thing? Its not shown on menu page.