r/TpLink • u/Newfie_Camper • 1h ago
r/TpLink • u/Ryan_TP-Link • 5d ago
Official When Someone Asks for Your Wi-Fi, What Do You Do?
Friends or family are over, someone pulls out their phone, and eventually you hear:
“Hey, what’s your Wi-Fi?”
Do you tell them the Guest Network password? Pull up a QR code? Maybe you’ve gone a step further and set up an NFC tag, printed card, smart display, or something else entirely.
Guest Networks provide a convenient way to share Wi-Fi with visitors while keeping your main network separate, and with holiday gatherings just around the corner, we’re curious how everyone actually handles sharing their network with guests.
Here are just a few ways you can get guests connected a little easier:
- QR Code: Let guests scan and connect rather than typing in the network information. If you're expecting a crowd, you can print the QR code and leave it somewhere easy to find.
- Password: Keep it simple and share the Guest Network name and password, type it in for them, or leave the details somewhere your guests can see them.
- NFC: Some users have found creative ways to use NFC tags to provide or launch Wi-Fi connection information with a tap.
- Something Else: Maybe you use a password manager, printed card, smart display, home automation, or your own DIY solution.
What's your Guest Network Setup?
QR code? Password on the fridge? Something more elaborate? Let us know how you make it easy for guests to connect!
r/TpLink • u/zorppppp • 2h ago
TP-Link - Technical Support BE63 Constant Drops
I've been troubleshooting some very strange home network issues over the past few days and could use some advice.
Network setup
- ISP: Xfinity
- Modem: Personally owned, separate from router
- Router: TP-Link Deco BE63
- Multiple Deco satellites with wired Ethernet backhaul
- Multiple Macs, both wired and wireless
Symptoms
Started Monday, right around the time we had some electrical work done (coincidence?), which did cause the decos to shut on and off, since then:
- My wife and I both experience intermittent freezes during video meetings, using different Macs in different parts of the house.
- Connection can work perfectly for 30–60 minutes, then suddenly experience severe packet loss or a complete interruption for several seconds.
- Wi-Fi remains connected during the freezes.
- Wi-Fi: Frequent latency spikes when pinging the router directly, sometimes hundreds of milliseconds, plus occasional packet loss.
- Wired Ethernet: Generally very low, stable latency to the router (around 1 ms), but intermittent complete dropouts have also occurred.
Troubleshooting
- Reproduced problems on at least three different Macs.
- Both wired and wireless connections have experienced issues.
- Rules out a single computer as the likely culprit.
- Continuously pinged router (192.168.68.1) and external IP (1.1.1.1), latency and drops on both.
- Observed significant Wi-Fi latency spikes when pinging the router by itself.
- Observed packet loss to both router and external IP during certain outages.
- Wired connections can be perfectly stable for extended periods before suddenly dropping.
- Disconnected all Deco satellites, disconnected downstream Ethernet switch, tested with only the main Deco and Wi-Fi latency spikes persisted even with satellites disconnected.
- Connected a Mac directly to the Xfinity modem, bypassing the Deco. Results were clean
- Replaced the router with another brand new BE63 I had in a box, BUT I restored from cloud backup, not factory reset or firmware roll back - could be next step
- To rule out some weird electrical issue, I turned off the circuits I had worked on; network problems continued.
Next steps I'm considering
- Factory-reset the Deco and create a completely fresh network configuration.
- Test wired and wireless performance before reconnecting satellites or switches.
- Potentially roll back the Deco firmware if supported.
- Test with a different router brand.
Is there anything I should look into or troubleshoot?
Any suggestions would be appreciated!
r/TpLink • u/vvdheuvel • 14h ago
TP-Link - General BE85 firmware update 1.3.0
Any experiences with this update? Firmware 1.3.0 build 26090112 rel.26481.
r/TpLink • u/Artetaarmy • 22h ago
TP-Link - Technical Support I got a new to link wifi router and it is giving random latency spikes on local network on wifi
It's archer c6 model. I tried changing every settings. Still I am getting average of 15 ms with spikes of 90 ms every 30 seconds.
The client devices connected to wifi are in the same room( not even 1 mtr distance).
I am fed up of this router already. My mobile hotspot wifi has better latency.
Any help is appreciated
r/TpLink • u/bikesailfreak • 1d ago
TP-Link - Technical Support Network optimization selects most busy channel?
As you can see in my 5Ghz everyone is on Channel 40. What does TpLink do after Network optimization?
It tells me: "Channel 40 is perfect".
Since there is no way to manually select, what are the options?
Edit add model: TP Link X50 Deco.
r/TpLink • u/RepairNo8730 • 22h ago
TP-Link - Technical Support Mod DNS & iVPN Client Archer BE9300
galleryFirmware Version: 1.3.1 Build 20260731 rel.12040(5553)
Hardware Version:Archer BE550 v1.0
Would like to route all network traffic through iVPN (setup as VPN client) and modDNS (Advanced > Network > Internet > Advanced Settings).
I'm guessing there's a leak because my home's public IP is listed in my Mod DNS logs. I setup the DOH link to include /<PROFILE ID>/router, and I can see some traffic is going through that route, but is separate from my home's IP.
In the VPN DNS settings, I can't provide the DOH url.
In device-level logs, `router` comes from the DOH URL, and the MacBook, iPad, and iPhone all have the DNS profile installed. I can't figure out where No device ID is coming from.
I don't want to have redundant DNS, but want to ensure that all network traffic goes through modDNS and iVPN.
r/TpLink • u/devildocjames • 1d ago
TP-Link - General L50 DS Necro LFG... J/k I'm needing a change/upgrade to my swich (TP-Link TL-SG1016DE), but, need SFF
reddit.comr/TpLink • u/Natistar2 • 1d ago
TP-Link - Technical Support Capped download speed at 944 with deco BE85
TP-Link Tri-Band BE9700 WiFi 7 Router (Archer BE600)
10G Port, 2.5G Port, 3× 2.5G LAN, 320MHz Channel, Covers up to 2,600 sq. ft.
Was giving me over two thousand download speed using Speedtest.net
T P-Link Deco 7 Elite BE85 Tri-Band WiFi 7 BE22000 Whole Home Mesh System
12-Stream 22 Gbps, 2x 10G + 2x 2.5G Ports, Wired Backhaul, 8x High-Gain Antennas
Is giving me no more than 944 download speed using Speedtest.net
Why is the deco capping my download speed at under 1,000?
The deco BE85 is up to date.
I am using the same cable. The same modem. Everything is the same except the router changed for more coverage.
r/TpLink • u/Budget_Presence3806 • 1d ago
TP-Link - Technical Support Cant reconfigure modem
reddit.comr/TpLink • u/awfulWinner • 2d ago
TP-Link - Technical Support DECO XE75 (US) / (CA) Firmware question
Update: 11-17-2026
So it looks like I indeed have a (US) version that follows the US TPLink webpage under the V1 hardware version in the dropdown:
https://www.tp-link.com/us/support/download/deco-xe75/v1/#Firmware
Under Firmware it shows the following versions:
Deco XE75(US)_V1_1.5.1 Build 26090212 Published Date: 2026-10-28
Deco XE75(US)_V1_1.4.5 Build 20241129 Published Date: 2024-12-05
Deco XE75(US)_V1_1.4.1 Build 20240722 Published Date: 2024-09-10
1.4.5 Build 20241129 Rel. 44718 is the one my phone app currently displays.
The Canadian TPLink webpage under the V1 hardware version in the dropdown:
https://www.tp-link.com/ca/support/download/deco-xe75/v1/#Firmware
Deco XE75(CA)_V1_1.5.1 Build 26090212 Published Date: 2026-10-30
Deco XE75(CA)_V1_1.4.1 Build 20240722 Published Date: 2024-09-14
Deco XE75(US)_V1_1.4.1 Build 20240722 Published Date: 2024-09-10
The Canadian page is all over the map. Shows both the CA and US versions of 1.4.1, neither of which is on my phone. And CA 1.5.1 build looks identical to the US 1.5.1 build, minus the country ID and publish date 2 days later.
I really wish TPLink could push this update out over the air faster. The one feature I really want pushed out in this update is: Supported for setting Channel bandwidth.
Curretnly right now because I can only choose channel width over either 80/160. Really hoping they add 20/40 to the list to improve my 2.4ghz stability.
Final note. Both 1.5.1 versions (US/CA) state "You cannot downgrade to the previous firmware after the upgrade." So I'd only get one shot at this.
Anyone from TPLink here... anyone?
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hi, quick question to anyone here with knowledge or works for TPLink.
I'm super paranoid and just want to be absolutely certain.
I had a support chat with TPLink regarding my router. Even though I bought this on Amazon.ca and reside in Canada, the package I got was model Deco XE75 US/1.0. My firmware is currently showing in the app as
1.4.5 Build 20241129 Rel 44718When I go to TPLinks firmware page
https://www.tp-link.com/ca/support/download/deco-xe75/v1/#FirmwareI see firmwares for both (CA) and (US). The (US) stops at a lower version than what I currently have on my app. The (CA) one
Deco XE75(CA)_V1_1.5.1 Build 26090212is the one I would like to install to get all the latest quality of life improvements and maybe fix some of my signal issues. The chat support agent gave me the following advise:
Since the latest firmware is not available in the app, please try to manually upadte the firmware of your TP-Link Deco.
https://www.tp-link.com/ca/support/faq/1599/ (METHOD 2)
How to login to Deco's web management page:https://www.tp-link.com/ca/support/faq/2641/
Please Download:Deco XE75(CA)_V1_1.5.1 Build 26090212I just want the general consensus of people here that have knowledge of such things that this is the correct advise. I cannot risk bricking my router since both my wife and I work from home remotely.
Thanks in advace!
r/TpLink • u/Beneficial_Ad_5485 • 1d ago
TP-Link - General Is there a 5GHz Bridge to Cisco AP?
reddit.comr/TpLink • u/Pop06095 • 2d ago
TP-Link - Technical Support XE75 firmware 1.5.1 didn't fix LAN loss issue
I finally got around to testing the LAN loss when the WAN drops, and with 1.5.1 it still fails. I checked to make sure I had Auto-WAN turned off before testing with the right port assigned.
I unplugged the modem (Comcast XB10), the status light immediately turned red on the main XE75 and within a couple minutes, the LAN failed.
If I missed a setting, please let me know. I have 1.5.1 Build 26090212 Rel 23251 installed. HW version is 1.6.
TP-Link - Technical Support Archer T2E PCIE Adapter Disconnecting
It'll work for around a few hours then randomly disconnect, and when you try to connect back it'll say "Cannot connect to this network." You can't connect back to internet unless you restart the PC Completely, and even then sometimes it doesn't work and you have to replug the PCIE Card.
Is there any way to fix this?
r/TpLink • u/Keptforgetting • 2d ago
TP-Link - Technical Support Archer BE550v2 firmware 1.3.3 issues
Hi, wondering if anyone can help
Got my Archer BE550v2 set up and working a couple weeks back with a new CityFibre connection. Everything was working perfectly until I updated the software a couple days ago to firmware 1.3.3 Build 20260623 rel.27273
Now my devices are constantly disconnecting, the WiFi network periodically vanishes from all devices WiFi lists (every other hour this happens.) Sometimes my android phone will be connected but the WiFi settings show "no internet access". I know there isn't an issue with the fibre line, as any devices connected over ethernet are working just fine, but most of my devices are using WiFi so this isn't super helpful.
I've tried factory resetting the router, and adding all my ISPs details back, and at first the WiFi was working again, but after an hour it disconnected everything on WiFi and won't show up in any WiFi network lists. Unplugging it and plugging it back in fixes it temporarily as well, but soon after the problem returns. I have tried rolling back the firmware to an earlier version but when I try to do that on the portal I just get an upload error. I'm using the correct firmware for this specific device and region, must be that reinstalling old firmware isn't supported.
If someone could shed any light on the issue I'd really appreciate it, it's driving me round the bend honestly
r/TpLink • u/JustNoNam3 • 2d ago
TP-Link - General Which Deco or other mesh is best for 2 floors
Hi, I have 2 living floors about 100sqm each and a basement where I would like to have wifi as well. I get 600mbps fiber from the ISP and have to use their router. The slabs between the floors are concrete and the walls are brick.
I can potentially get cables to most of the first floor if there is need for that. I also don't need super fast wifi everywhere, just enough to cover the house so I can later use the home network to control devices with the Home Assistant (this is a TODO project) and to have something to my TV/PS5.
I had my eye on the XE75 on amazon.de, but it is now gone and the BE65 is too expensive for me.
What would be the most fitting way to get wifi everywhere reliably and relatively cheaply?
r/TpLink • u/TheRealSaphier • 2d ago
TP-Link - Technical Support What is going on with my Iphone?
None of the other devices are doing this. Is it a known bug? Or am I actually moving data for the Chinese government?
r/TpLink • u/Hypoaster • 2d ago
TP-Link - Technical Support Why is it blocking?
So I have a Mesher RE315 and it's blocking some websites that it shouldn't do. Some of the websites are like this: • escargot.chat • nina.chat • [domain].neocities.org (normal neocities.org works) So any ideas how i fix? Oh and I'll install the new update this night. Hope it helps.
r/TpLink • u/chuci_24 • 2d ago
TP-Link - General TL-SG108-M2 & be3600 (Be25) UK
Current set up is:
Ont - isp supplied router (bridge mode) - Main Be25 - ethernet backhaul to 3 other be25s*
I currently have the tp link 8port gigabit poe unmanaged switch which works just fine but I'm upgrading to 2.5gb fibre so need to replace the switch. I was considering just using the TP-Link TL-SG108-M2. I don't need the poe so this looks about right for me.
Are there any issues with this switch as I keep reading about feedback loops and loop prevention etc and I just assumed it would just simply work?
Also are you supposed to turn loopback prevention on or off on these?
Thanks
r/TpLink • u/PlmokBro • 2d ago
TP-Link - Technical Support Wired backhaul refuses to work with discord
galleryI’m rooming in with 4 others so got a mesh system better split connection & lower latency to my PC in the house. Heard that wired backhaul on a mesh system works pretty well in my situation so I bought a TP-LINK DECO WE10800 - AXE5400. However it has an issue w/ a couple of my app where it doesn’t work with Ethernet connected nodes but does over WiFi. (As you can see Discord is stuck until I disable Ethernet).
(Firmware: 1.5.0 Build 20260603 - most recent)
Connection works as follows:
[Spectrum Router > Ethernet-Main Deco router > WiFi-2nd Deco > Ethernet-PC ]
I tried everything I could find Flushing DNS setting, setting Deco to access point (only disable internet), ran program in compabiliy mode+Admin, & changed DNS to cloudflare(1.1.1.1)/google(8.8.8.8).
Can anyone help?
r/TpLink • u/Routine-Heat-4276 • 2d ago
TP-Link - General Why is the worse router more expensive?
Okay, so I am from Slovakia, and I was looking on routers for my new home, and I came up with 2 candidates; the Archer AX58 & the AX55. I have been reviewing stuff about these routers, and kid you not, the Archer AX58 is 15€ more expensive, and worse in PPP.
So the key aspects in both routers are:
They have Gigabit ports
They both support EasyMesh
They are both AX3000 routers
They have the same dBi antennas, and strong coverage.
But 2 main differences:
The AX55 has an USB port.
The AX55 has 512 MB of RAM, instead of the 256 MB, doubling the AX58 RAM.
And I don't understand that, because here, in Slovakia, the AX58 is the most recommended router, and the AX55 falls behind.
I wanna buy the Archer AX55 to my main house, because of the RAM count, and I would move the AX58 into the new flat with a gigabit plan, and there isn't a need for very high count of connected devices.
May someone explain this to me, why is the AX58 more expensive, and worse in specs than the AX55? Is it somehow controlled by TP-Link itself? Or since it's more power efficient, it's a good reputation?
I myself think, that the archer AX55 design is way much more modern, prettier and futuristic.
Drop your thoughts on this, and if you own both, or one of them, give your life experiences.
r/TpLink • u/Emotional_Growth_513 • 2d ago
TP-Link - General To Links first wifi 8 Router check out my impressions
youtu.ber/TpLink • u/External_Income9569 • 3d ago
TP-Link - Technical Support TP-Link AX3000 WiFi 6 Range Extender Internet Booster not working
Hello, I've had the TP Link RE700X (AX3000) for about 8 months now. Haven't had any issues with it before but today, for some reason, it started malfunctioning I guess. None of the lights are turning on and when I reset it, the only like I get is the WiFi light that shows red for about 1-2 second then cuts out. I've tried resetting it, leaving it unplugged for about 10-15 mins, and moving it to the exact room where the router is but still not getting anything. Does anyone have any fixes for it?
r/TpLink • u/Routine-Heat-4276 • 2d ago
TP-Link - General Should I be proud? (PLC)
gallerySo I bought PLC adapters, the PA4010 ones, and they have only 100 mbit ports, but I got it for 9€, can't complain. So, I have a P2P powerline connection over 2 places, but it's over 2 GFCI breakers, and 3 regular breakers. And the P2P breaker connection gave me 20/20 (max, often around 5/3), I wanted to give up, and resell the adapters, but for fun, i just said, lets try that plug, even if it goes through 2 clocks (electrical closets) with 2 GFCIs, and i couldn't believe it. It gets around 50/17 (out of my 100/20) on a sunny day, but at night it gets around 30/10, unsure why. Idk why could 2 gfcis breakers give better speeds than 2 p2p breakers on the same phase, yeah, there is high intake, but still, it works worse, much worse than with 2 GFCI adapters that worsen the speed. Well PLC experts, tell me why it is like that. I am giving the speedtest proof.