r/Tools • • 21h ago

How do you actually drill right on the mark?? My bit keeps wandering off

Thumbnail reddit.com
0 Upvotes

Ok this is probably a dumb question but I genuinely don't get it. I mark a little dot where I want the hole (for a handle), line up the drill, and the second I start the bit just skates off and the hole ends up a few mm off. Every. Single. Time.
How do you guys hit the dot dead on? Is there some trick to marking it, a tool, a jig, or am I just holding the drill wrong lol?
Also curious what you tried that didn't work, so I can skip those


r/Tools • • 6h ago

Drill/ impact suggestions?

0 Upvotes

I rarely use power tools, however when the time comes it’s a huge pain to not have one. I work with cars, and generally am installing accessories(visors,deflectors,crossbars,splash guards) more than mechanical work outside of oil or tire changes. My favourite colour is neon lime green, is Ryobi worth the time and money? I’d like a reliable, low cost option that can provide a little power when I need it. Possibly also for agitating carpets for detailing. Currently using(avoiding) a small tealish blue impact that started smoking putting crossbars on a Honda Pilot, ideally there is no smoke installing crossbars or any other installs with mild resistance involved. People have been cruel to me all my life I can take the Ryobi hate if it saves me money, I’ve also seen mentions of low theft rates for Ryobi tools which would be nice.


r/Tools • • 5h ago

Need help selecting drill bits for Christmas present for BF

Thumbnail
gallery
7 Upvotes

My boyfriend has commented before that he really wants a Norseman drill bit set. He does a lot of tinkering/building, mostly with metals; he works on motorcycles and guns for the most part (and other projects for me sometimes, lol!) Can I have some help selecting a good set to get him? My budget is around $200-250. Here are a couple I found for examples, but I am not sure which set would be better for him, or if something else is better.... thank you so much!!


r/Tools • • 5h ago

Help lol. Can't get this bit out.

Thumbnail
gallery
3 Upvotes

I was on the phone when swapping bits between my dewalt screwdriver and this tiny one. Accidentally dropped the one meant for the dewalt into the small one.

I have tried the tweezers in the pic that came with my ifixit computer kit. Bent them to hell in the process and it didn't help.

I have tried a magnet but the bit is like perfectly rotated in there so it isn't budging.

Any ideas? I would greatly appreciate it. This is the only one I don't have a duplicate of (of course.)


r/Tools • • 18h ago

Insane deal -what cheap (ish) tracks you’d recommend

Post image
7 Upvotes

Today only- M18 plunge saw with 8ah Forge battery for $267. Been wanting to buy this for years but couldn’t justify the price until today. Now, the question for you all is what affordable tracks should I buy for it? I like the festool ones cause of the rear stops but too rich for my blood. Hope someone in my position can take advantage too.


r/Tools • • 7h ago

Any suggestions how I could organize my tool closet better? I'm overwhelmed and would like some advice. The shelves are easily moved/removed if there's some better solutions.

Post image
9 Upvotes

r/Tools • • 1h ago

What tool would be best ?

Thumbnail gallery
0 Upvotes

r/Tools • • 17h ago

Help!

Thumbnail
gallery
0 Upvotes

I broke a Stanley staple gun (tr110) and I hoped that the problem was simple enough, but when I opened it, everything was apart! Does anybody know how to put everything back together?


r/Tools • • 22h ago

Milwaukee / TTI is Big Mad: Extremely detailed lawsuit filed against Chervon

Post image
0 Upvotes

r/Tools • • 1h ago

What Equipment Do You Use to Keep Ice Under Control Around Commercial Properties?

0 Upvotes

I've been looking into ways to make winter maintenance easier, especially when it comes to dealing with ice around parking lots, sidewalks, and building entrances. Shoveling snow is one thing, but once everything freezes over, keeping those areas safe becomes a different challenge. While researching commercial de-icing equipment, I came across a 100 lb. universal spreader designed for distributing rock salt and ice melt. It has 13-inch pneumatic tires and an adjustable spread radius, which seem useful for covering different outdoor areas more efficiently. I'm curious whether a walk-behind spreader with that kind of capacity is practical for maintaining larger commercial spaces or if a truck-mounted option would make more sense. For those familiar with winter maintenance, what would you consider when choosing between the two?


r/Tools • • 17h ago

Finally saw these in store

Post image
54 Upvotes

r/Tools • • 19h ago

Our large Meme Tools family is still growing: new Klein and Hyper Tough babies

Post image
72 Upvotes

Recently, Klein came up with their version of a simple meme tool (65200F) as well as a 51-piece kit including bits and sockets (33807F) while Hyper Tough released a similar set with 52 pieces.

Thank you to u/Moss312 for alerting me about the Hyper Tough offering.

NOTE: a 'meme tool' is defined here as a ratcheting and lockable flex-head with a bit holder at the other end and a pass-thru extension. I did not come with the name LOL. Only tracking the different versions to help you all make informed purchase decisions 😊


r/Tools • • 21h ago

Dewalt Cordless sander

Post image
4 Upvotes

Anyone have experience with the 5” battery sander?


r/Tools • • 4h ago

Found our sickle in an old box

Thumbnail
gallery
14 Upvotes

The sickle got into our hands back in 1987 but I don't know actually when it'd been made. It's been resting in the depths of the garage for a good while now. Took it out for a 2-minute quick job. Cut a small patch of stinging nettle in the back yard.

When did you use yours last time?


r/Tools • • 19h ago

Why your best buddy is named Phillips......

Post image
0 Upvotes

Ever wonder why you spend your life driving Phillips screws?

Robertson screws are widely used in Canada across almost all construction, woodworking, and electrical trades, so the real question is why they didn't take over U.S. manufacturing—a split that comes down to a historic licensing dispute with Henry Ford and the rise of Torx (star-drive) fasteners for heavy industrial use.

  1. The Henry Ford Dispute (Why Phillips Won the U.S.)

In the 1920s, Canadian inventor P.L. Robertson refused to grant Henry Ford an exclusive license to manufacture Robertson screws in the United States.

Ford's Pivot: Ford wanted full control over his supply chain. When Robertson turned him down, Ford turned to American inventor Henry Phillips, who willingly licensed his cross-head design.

Industry Momentum: Because Ford adopted Phillips screws for the Model A and subsequent vehicles, U.S. toolmakers, factories, and hardware stores standardized around the Phillips head. By the time Robertson's patents expired decades later, the American construction and automotive industries were already locked into Phillips tooling.


r/Tools • • 20h ago

Canadian knipex dupes

Thumbnail
gallery
25 Upvotes

r/Tools • • 1h ago

Triple square M8 removal help

Post image
1 Upvotes

Trying to remove a luggage triple square M8 in an Audi but it won’t budge. Cleaned it thoroughly but no luck. Tried hitting it with a hammer from other forums but still won’t budge. Any other tips would be greatly appreciated!


r/Tools • • 23h ago

Ridgid impact wrench

Post image
0 Upvotes

I'm looking to get a buddy of mine an impact wrench for Christmas (preferably cordless). I found this Ridgid brand impact wrench online for around $150 as a kit. My buddy has never owned any impact wrenches so this would be his first. I want to make sure it lasts him decently long and make sure it's a good quality option. Anyone have experience with Ridgid tools? Specifically this impact wrench.


r/Tools • • 10h ago

PSA: Dont store your micro drills in cheap plastic containers

Post image
0 Upvotes

r/Tools • • 15h ago

What do yall want for Christmas?

27 Upvotes

If you're in the trades, what is actually a good gift for you? My dad's a carpenter, he's got every tool under the sun and then some, trying to crowdsource some new ideas here lol btw he's a milwaukee guy, but has a couple of royobi and makita batteries on hand

Edit: I am super enjoying the responses already!! I legitimately want to know what you want for christmas!


r/Tools • • 6h ago

Everyday tools I use

Post image
29 Upvotes

Some I don’t have in me that are over in my box but this is the majority of what I carry around the sales and storage lot as a camper/rv tech. Always love tool suggestions to try out 😃👍


r/Tools • • 18h ago

Request for advice: compact 1/2 Ton Jack that can get on a plane

19 Upvotes

I have a friend who repairs specialty equipment that weighs 2000 lbs and has 4 casters. He travels all over maintaining it, flying out half the time, and sometimes a caster needs replacing. 95% of the repairs are done with basic hand tools and deep knowledge, thie caster is an exception.

Well right now for a wheel/caster replacement, it's a challenge, and bringing a 1/2 ton hydraulic bottle jack is a pain in the butt on checked luggage, and greatly increases the chance of a manual search ruining your stuff.

Anyways, what is the most compact 1/2 ton jack you know of? Anything that can lift an inch is good enough; wood blocks can make up for the rest. Equipment body is about 6" above the floor. Wrench/manual powered or pneumatic would be preferred to risk spilling oil on equipment and luggage.

edit: thanks everyone for the suggestions. here's a few of my favorites for anyone interested:

(1) expensive but good scissor jack: https://www.calcarcover.com/product/low-profile-billet-aluminum-jack/705

(2) Cheapo scissor jack with nut adapter or welded on. Example https://www.harborfreight.com/1-1-2-half-ton-scissor-jack-66907.html

(3) Machinist jack - lots of expensive options

(4) Massive air bag and inflator, https://a.co/d/0hJx4Syg overkill but at least it packs compact

(5) 12v powered scissor jack, does not include battery so probably won't go this way but still a good find https://a.co/d/09SxB5CL


r/Tools • • 15h ago

New Pack-a-Punch weapon just dropped

Post image
36 Upvotes

I don't know if this belongs here but if somebody needs help getting those oil filters tight you should probably buy this. It's on one of those websites that doesn't even tell you the price so you know it's ungodly expensive