r/Tools • • 1h ago

Am I the only one that has never seen these before?

Post image
283 Upvotes

This was a first for me. I’ve seen plenty of the super long straight versions, but I’ve never seen the 90° jaws. I guess when you need it, you need it bad.


r/Tools • • 7h ago

This thing has been in my workshop for a while now. Made from stainless steel, brass and a small plastic washer.

Post image
128 Upvotes

The brass handle can adjust the threaded core up and down.


r/Tools • • 3h ago

What do yall do with the “Tools” that come with assemble yourself household things?

24 Upvotes

I just cleaned out the infamous junk drawer, and I have a whole box of tools that have come with various household items my wife and I have acquired over the years. A 4” crescent wrench that came with a shower head, 20+ Allen keys, several cheap small plastic levels, tiny electronics/eyeglasses screwdrivers, and so forth. I don’t want to throw them away in the aspect of being wasteful, but I have no need what so ever for any of it. Just curious what y’all end up doing with these “tools” as you get them?

Throw them in the junk drawer?
Throw them directly into the trash?
What?


r/Tools • • 6h ago

Everyday tools I use

Post image
29 Upvotes

Some I don’t have in me that are over in my box but this is the majority of what I carry around the sales and storage lot as a camper/rv tech. Always love tool suggestions to try out 😃👍


r/Tools • • 4h ago

Finally got my 16” southbend lathe home and I’m surprised with its capabilities!

20 Upvotes

For context, I a have a 1942 southbend 8117D lathe that has the original 1-1/2hp dual voltage 3 phase motor wired for 220v with a peak amp draw of 4.8ams according to the motor plate. I have it running on a VFD that takes 110v and converts it to 220v 3 phase that’s rated for a 2hp motor, after some adjustments to the belts tension to remove the slipping, I am please to say this is taking a 110 thou depth of cut at 390rpm and a feed of .0105 feed rate for the power feed without struggling on steel


r/Tools • • 5h ago

Mine shop-made tools

Post image
18 Upvotes

I thought it would be fun to share a picture of the tools, which I got from my father in law. He worked in the machine shop of a mine in Limburg, the Netherlands (closed in the 70s), and I believe there where made there.


r/Tools • • 47m ago

Inflater as sawdust clearer!

Post image
8 Upvotes

Was getting tired of blowing down on the saw blade so I could see my line…then got this idea… maybe I can figure out a 3D printed way of slotting this thing onto it as needed!


r/Tools • • 4h ago

Found our sickle in an old box

Thumbnail
gallery
15 Upvotes

The sickle got into our hands back in 1987 but I don't know actually when it'd been made. It's been resting in the depths of the garage for a good while now. Took it out for a 2-minute quick job. Cut a small patch of stinging nettle in the back yard.

When did you use yours last time?


r/Tools • • 3h ago

Look at this beauty

Thumbnail
gallery
9 Upvotes

r/Tools • • 20h ago

Craftsman estate sale find - $20

Post image
156 Upvotes

Edit - I did some extensive research and unless someone can prove me otherwise - these aren’t USA made. The number printed on the pliers are sears catalog stamp.
I just liked the fact they all had black dipped handles and they looked vintage enough to possibly be USA made. My loss I guess - time to sell the house lol


r/Tools • • 5h ago

Need help selecting drill bits for Christmas present for BF

Thumbnail
gallery
8 Upvotes

My boyfriend has commented before that he really wants a Norseman drill bit set. He does a lot of tinkering/building, mostly with metals; he works on motorcycles and guns for the most part (and other projects for me sometimes, lol!) Can I have some help selecting a good set to get him? My budget is around $200-250. Here are a couple I found for examples, but I am not sure which set would be better for him, or if something else is better.... thank you so much!!


r/Tools • • 7h ago

Any suggestions how I could organize my tool closet better? I'm overwhelmed and would like some advice. The shelves are easily moved/removed if there's some better solutions.

Post image
9 Upvotes

r/Tools • • 15h ago

New Pack-a-Punch weapon just dropped

Post image
36 Upvotes

I don't know if this belongs here but if somebody needs help getting those oil filters tight you should probably buy this. It's on one of those websites that doesn't even tell you the price so you know it's ungodly expensive


r/Tools • • 17h ago

Finally saw these in store

Post image
54 Upvotes

r/Tools • • 19h ago

Our large Meme Tools family is still growing: new Klein and Hyper Tough babies

Post image
72 Upvotes

Recently, Klein came up with their version of a simple meme tool (65200F) as well as a 51-piece kit including bits and sockets (33807F) while Hyper Tough released a similar set with 52 pieces.

Thank you to u/Moss312 for alerting me about the Hyper Tough offering.

NOTE: a 'meme tool' is defined here as a ratcheting and lockable flex-head with a bit holder at the other end and a pass-thru extension. I did not come with the name LOL. Only tracking the different versions to help you all make informed purchase decisions 😊


r/Tools • • 2h ago

Storage solutions for mobile mechanics?

3 Upvotes

Hey guys, I'm a heavy equipment rental tech that works out of a Ram ProMaster 3500 van. I currently have a US General 42 inch box placed near the partition wall that separates the cab from the cargo area, with a ratchet strap over the top of it to hold it in place. I've had it set up this way for about 2 and a half years now and have no issue with keeping it this way as my main box.

The problem is, I'm running out of space in the box, and I have most of my blow molded cases on the van shelves and I'm running out of space there too. So I've been looking at the Milwaukee Packout style stackable boxes to put on the right side between the shelving and the sliding door.

I'm leaning away from Packout and the pricier, more robust built brands mainly because I don't need something super sturdy, since it'll likely live in the van most of the time anyway and won't be dragged across a job site very often. I'm moreso looking at these systems for the size and modularity of them. With that said, what would be my best options for something like this, and are there any good ways (not a bungee cord) to secure these in a van and keep them from falling over? Thanks!


r/Tools • • 15h ago

What do yall want for Christmas?

27 Upvotes

If you're in the trades, what is actually a good gift for you? My dad's a carpenter, he's got every tool under the sun and then some, trying to crowdsource some new ideas here lol btw he's a milwaukee guy, but has a couple of royobi and makita batteries on hand

Edit: I am super enjoying the responses already!! I legitimately want to know what you want for christmas!


r/Tools • • 2h ago

How do I get the blade off a Ryobi miter saw

2 Upvotes

I loosened the screw to get the guard up and I am trying to loosen the hex bolt holding the blade in. I know that it's opposite of normal and I need to do righty loosy to get it off. But the damn bolt won't turn. I've tried the hex key that came with it and my own. I busted my knuckles pushing so hard that the fucking key popped out. This bolt isn't moving. What am I doing wrong?


r/Tools • • 1d ago

I am a handyman at a couple of retirement buildings. Heres my purse and often used tools

Thumbnail
gallery
225 Upvotes

Mainly the tools i use, and the carry bag i have them in. didnt really include some other tools like saws or drill bits cases and such. Most of the stuff i picked simply because I like it. This is nowhere near all my tools, just my “daily” stuff


r/Tools • • 5h ago

Help lol. Can't get this bit out.

Thumbnail
gallery
3 Upvotes

I was on the phone when swapping bits between my dewalt screwdriver and this tiny one. Accidentally dropped the one meant for the dewalt into the small one.

I have tried the tweezers in the pic that came with my ifixit computer kit. Bent them to hell in the process and it didn't help.

I have tried a magnet but the bit is like perfectly rotated in there so it isn't budging.

Any ideas? I would greatly appreciate it. This is the only one I don't have a duplicate of (of course.)


r/Tools • • 1d ago

Which (if any) of these pliers are worth keeping?

Post image
182 Upvotes

If this post sparks responses I have several more like it with other tools. Basically I have 3 generations of tools. A few I bought or were given, then the ones I got from my mom when dad died, and the ones that were my son’s when he died. We have a local tool library and I’m going to give any extras to them, but I just don’t have room in my garage for this many duplicates.

Should I donate them all and get a new set? Are any of these of interest to a collector? Because I would gladly give them to whoever is interested.

Note: I have some very sentimental tools from both my dad and my son, and I’m not even sure whose garage these came from. These are not sentimental to me.

EDIT: okay! I can take a hint! Bigger toolbox and larger garage it is! I keep them all. Thanks everyone, you’re hilarious.


r/Tools • • 18h ago

Today’s marketplace find, 650$

Post image
23 Upvotes

Thought I would never own any Festool tools, until today, got these all in for 650.
Sustainers show their age, missing parts and yellowed, tools on the other hand, are pretty much in perfect working condition, other than some blemishes, router and sander were the ones I wanted, but owner would only take an offer on al three.
Well, I’m mainly looking for advice, track saw and sander are 2008 models, though I have younger tools that look and perform worse than these, router is 2015.
Any advice on performing maintenance on these? All I did was clean them up a bit. Are brushes easy to change?
I’m in Mexico, so no official service providers down here, would have to imports parts myself.
Also, noticed the ts struggles a bit to cut, blade feels pretty sharp tho it’s dated back to 2015, any blades you recommend? Or just buy a new Festool?
Thanks!


r/Tools • • 1h ago

What tool would be best ?

Thumbnail gallery
0 Upvotes

r/Tools • • 1h ago

What Equipment Do You Use to Keep Ice Under Control Around Commercial Properties?

0 Upvotes

I've been looking into ways to make winter maintenance easier, especially when it comes to dealing with ice around parking lots, sidewalks, and building entrances. Shoveling snow is one thing, but once everything freezes over, keeping those areas safe becomes a different challenge. While researching commercial de-icing equipment, I came across a 100 lb. universal spreader designed for distributing rock salt and ice melt. It has 13-inch pneumatic tires and an adjustable spread radius, which seem useful for covering different outdoor areas more efficiently. I'm curious whether a walk-behind spreader with that kind of capacity is practical for maintaining larger commercial spaces or if a truck-mounted option would make more sense. For those familiar with winter maintenance, what would you consider when choosing between the two?