r/TrueChefKnives • u/Boo_kie • 15h ago
Question Global knives set
Why is my flexible kniv’s logo not red color?
r/TrueChefKnives • u/Boo_kie • 15h ago
Why is my flexible kniv’s logo not red color?
r/TrueChefKnives • u/KuttuGokil • 15h ago
Any opinion? Thank you
r/TrueChefKnives • u/BestKindOfWeirdo • 5h ago
This is what my knives looked like after they were sharpened. I don't have fancy knives, except for the nice Japanese one. Even the Global, which was returned nice and sharp, has sharpening marks all over the blade. Tell me that's normal and I will settle down. There are literally chips out of my $400 Japanese knife. Kindly advise before I blow a gasket. Thanks in advance to this fine community. PS, this company changed hands recently, after a Seattle famous knife sharpener sold it.
r/TrueChefKnives • u/No_Onion_6924 • 12h ago
I bent my tip, because it got a hit from the closing drawer. Tried to bent it back, broke it twice. Good thing: it's straight again, bad thing: there are like 2mm missing.
What would you do? Shorten it, k-tip, anything else?
r/TrueChefKnives • u/vexir • 13h ago
Hi all,
To those who frequent Tokyo for knives, I hear a mix of things about Kappabashi St. stores. Some seem to think it’s all a bit tourist rip off, others thing you can find good stuff only if you know what you’re looking for, and others think all of that is overblown and to just visit and buy what you like.
My brother in law and I are novices in the world of true knives, and I’m wondering if you have any advice for us that doesn’t involve a ton of knowledge we don’t have yet - for example specific stores to visit that will treat you well, or easy ways to tell what is a rip off when we are right there in store for example?
r/TrueChefKnives • u/xxgingerwizard • 8h ago
Got a couple new knives in, and one that I picked up a couple weeks ago!
Got a Hatsukokoro Shinkiro AS 210, my first (for me) expensive knife purchase and I love it. Made dinner with it tonight and it’s already getting a nice patina! Cutlery and more had it on Black Friday so I convinced myself now was the time to grab it, and I’m thrilled I did because it’s a dream. I love the more subtle Damascus pattern on it.
Second one is a Yu Kurosaki Kokusen stainless clad AS bunka 165. I’ve used it several times since I got it a couple weeks ago, and it’s a blast to use.
Third is a Wustof 6in, grabbed this one as I wanted a good knife that I could use for tougher things when needed, and so my wife has a knife she can that I’m not worried about her destroying 😂.
r/TrueChefKnives • u/vertexbladeworks • 5h ago
Hello fellow kitchen knife enjoyers. I am starting a series where I attempt to make kitchen knife handles out of every type of wood I can get my hands on. I will be focusing primarily on Wa handles. I hope you will find the information useful!
Always happy to answer any questions!
r/TrueChefKnives • u/TheYungHomie2017 • 19h ago
Really excited to post, as this is my first “real” nice chef knife after getting into this hobby over the last year. I’ve really wanted a santoku or a ginsan knife, and when I saw this piece come up on Chefs Edge I figured no better time than now to take a big jump!
I really love the sharpness and edge on this knife, but I will say that beautiful mirror polish is so difficult to keep clean. Very satisfied overall though!
r/TrueChefKnives • u/fishybowling • 21h ago
Picked up a Nigara anmon from the recent Chefs Edge black friday sales. I absolutely love the raindrop damascus and have been wanting one for a while, and serves as a nice statement and celebratory piece as an enthusiast home cook. Was torn between this dark maple and carbon fibre handle options but after handling it in person I've definitely made the right choice.
I'm aware of the mixed views about it's performance vs cost and have found that as others have pointed out the Damascus appears to cause more than ideal stickage, but it's an absolute thing of beauty!!
r/TrueChefKnives • u/Optimal_Difference64 • 14h ago
Hey all!
It's been a while since my last one. I've been abroad for the last couple weeks, so I was finally able to pick up my acquisition from the Knifewear sale. First off, some specs about the knife:
Some initial impressions:
The cladding on this is stunning with the individual damascus layers catching the light differently. Tamura-san basically picks a unique selection of steel to execute this. It's also pretty cool to pick this one up from Knifewear, given that Tamura-san previously worked there before jointly starting Tetsujin with Myojin-san. The geometry on this is rather thin too, with a sub 3mm spine thickness. I did a couple test cuts and it’s basically what you can expect from Myojin. The kireaji can be described as smooth and sterile, while being whisper quiet even splitting a carrot down the middle. It wasn’t too sticky compared to the other Myojin knives I’ve tried in the past, even with the lacquer still on. However, time will tell once I put it through a proper prep session or two. Profile wise, it's closer to my Tanaka x Izo given the smaller flat spot at the heel, though it does have a higher sweep closer to the tip. As for the balance, it is somewhat handle heavy with the balance point only 15mm away from it. This is usually right behind my pinch grip, so I may consider a lighter handle material. I'm a big fan of how the Kikuchiyo x Izo is balanced with the slim cedar Taihei handle, so maybe another cedar handle is in the future for this one.
Given how a lot of these Tetsujin specials are one offs or produced in extremely limited volume, it's not always easy to find similar examples out in the wild. This one likely won’t be a regularly produced Tetsujin line. Thanks to /u/Ok-Distribution-9591, I can say that this one is similar to the one Ivan polished a couple months back (while keeping Myojin's work on the other side). Additionally, Syoukon did release another one a couple weeks right before the knifewear sale. I'm also aware of a Tetsujin SP Sujihiki we saw from the Ai & Om anniversary sale that is also hand laminated damascus, but with a significantly different lamination pattern. Of course there's also the Lightning and the Rentetsu cladding (which i'm not sure if they're getting the SP designation). If there's anything I missed here, feel free to contribute.
With that out of the way, hopefully you all enjoy the write up and pictures! I do have a couple of review and update posts queued up, so stay tuned!
r/TrueChefKnives • u/mmarktfsi • 21h ago
Hello TCK,
In another installment of this travel series, I was lucky enough to be invited to visit the workshop of Miyazaki Tanrenjo in the Fukue Islands off the coast of Nagasaki for a very special personal occasion of mine back in October.
More on that later.
For those who are unfamiliar with Miyazaki-San’s work, he is a 35 year old blacksmith trained under Toshio Oba of Fukuoka. Miyazaki-San is known as one of the few blacksmiths in Japan that still practices an ancient form of Japanese forging; Hon Warikomi. This is a method that split-welds an extra soft, low carbon iron shell (often tartara iron sourced from reclaimed materials) with an insert of hard inner steel (hagane) before being drawn out and thinned.
Miyazaki-San is also unique in the sense that his practice is truly a one man forge-to-finish. He sources every component that goes into his forging and finishing, from felling trees in the summer to generate his own pine charcoal for hardening, to mixing his own custom flux composition.
Miyazaki-San was kind enough to demonstrate a Hon Warikomi technique, which he used to create my custom order; a 170mm Tsubaki blade with a Aogami Blue 2 carbon steel core.
The Tsubaki shape is a variation of a Hakata shaped knife (an all purpose knife shape unique to the Fukuoka region) and only two smiths are known to shape knives this way: Toshio Oba and Miyazaki-San himself. A Tsubaki features a parabolic spine (unlike a bunka) with a drop-pointed tip and a relatively flat belly along the edge.
Because the shape was so distinct to Miyazaki-san’s background, I opted for this profile.
My wedding! I was married in Hakone at the tail end of October, and I had contacted Miyazaki-San very long in advance to join his queue of custom orders to create a knife for my wedding cake cutting ceremony. As a knife nerd, I thought it was fitting to have something special (to me) for this ceremony, and Miyazaki luckily agreed to assist!
It was a beautiful ceremony at the foot of Mt Fuji made even more beautiful by this special knife.
I’ll do a more in depth write up of this knife a bit later, but I want to give a huge thank you to Miyazaki-San, who is one of the kindest and most welcoming humans I have ever come across and his wonderful wife for showing me around Goto Island.
Shape: Tsubaki
Length: 170mm
Construction: Hon Warikomi (Soft-Iron clad)
Core: Aogami #2 (Blue Paper Steel #2), water-quenched
Handle: Wa Octagonal oak burl wood with silver accents and a white buffalo-horn ferrule
Takada No Hamono - Sakai Japan 2022
Nigara Hamono - Aomori, Japan 2024
r/TrueChefKnives • u/complicatedcucumber • 1h ago
Hi, I ordered 2 (22cm and 11cm) Pallares knives from a store that’s based in Barcelona Comerical Rodriguez.
Both knives arrived in some strange DIY wrapped packaging and they are both super blunt, can’t even cut through paper comfortable. Additionally, the larger knife has marks and what looks like glue around where the handle and the metal meet (see photo). Overall they do not look pristine at all or as though I’ve ordered new knives. They look a bit old and also aren’t even sharp. The shop lists itself as an official supplier of these knives, yet they seem old.
This is my first time buying knives. Should I send them back? Is this normal?
r/TrueChefKnives • u/wafflelol101 • 7h ago
hi i know nothing about knives and im looking to gift a nice big fat knife to my uncle for christmas. price ranging from around $70-$100, preferably a japanese brand that looks cool but also works well. he loves grilling meats if thats helpful info?? i dont want a set, just one large knife that looks good as a gift. thank you!!!!
r/TrueChefKnives • u/STROKE98034 • 8h ago
This knife got a much more hardcore patina than my other blue 2 knife. I sliced warm protein with it on day one, and a roast today. You think that's it or does this steel just vary a lot from knife to knife?
r/TrueChefKnives • u/Uranium_Soup_69 • 8h ago
I’m looking to get a laser, and I’ve been eyeing the SKD Yoshi 240 for as long as I can remember. Does anyone have any better bang-for-buck recommendations? Thank y’all so much, love this thread. Also, I’ve been considering getting a suji since I already have a workhorse 240 gyuto, Moritaka AS. Which should I start with, a laser or a sujihiki?
r/TrueChefKnives • u/reklaw_23 • 10h ago
Looking for some advice from the community.
I’ve been hunting for a Tetsujin 240mm Gyuto for the last few months without much luck. I got the itch for something a bit different and came pretty close to pulling the trigger on a Kagekiyo, but decided to hold off and keep waiting.
Now the Wakui has just come back into stock, which is another knife I was chasing last year. For context, I already own a Yoshikane, Mazaki and Matsubara, so I’m ideally looking for something that offers a noticeably different cutting experience rather than just adding another similar knife to the collection.
So I guess the question is: would you keep waiting for the Tetsujin, or would you pick up the Wakui or Kagekiyo instead?
And for anyone who has used them, would the Wakui or Kagekiyo offer a noticeably different feel or performance compared with what I already own?
r/TrueChefKnives • u/dualshotty23 • 12h ago
I recently bought my first Japanese knife, a hatsukokoro ryuhyo 210mm in s2.
I’d love to add a slightly shorter bunka to complement it and this is locally available. It feels good in the hand but I have not heard much about kikuichi in general and this appears to be a newer knife with limited reviews so any thoughts would be appreciated.
r/TrueChefKnives • u/ShineZealousideal145 • 16h ago
Hi,
If you were to buy your first good knife, what would it be? Budget: up to 200 EUR.
My husband is looking for good knives, and I'm thinking of getting one for Christmas and taking advantage of Black Friday.
The thing is: I know nothing about knives but he has been mentioning the Japanese ones and he's really into cooking.
Can you guys pls help a girl out?
Really appreciate it!