r/TrueChefKnives • • 1h ago

NKD small Japan haul

Thumbnail
gallery
• Upvotes

Just got back from Japan yesterday after a two week trip. I’ve been looking forward to this trip my entire life, having been interested in Japanese steel since long before I was a chef, growing up in my grandpa’s machine shop. I visited many knife shops in Osaka, Kyoto and Tokyo. All three of these purchases came from my planned ‘knives only’ day in Sakai. From bottom: 180mm Ashi white #2 carbon gyuto, 210mm Stainless Kagekiyo Ginsan gyuto (forged by Nakagawa), 180mm Enami Blue #2 carbon Santoku. These were all selected to fit specific holes in my home rotation and will not be going in my work box.

My Ashi visit was quick and professional. I had reserved a knife for myself and one for a friend about a month before my trip. Loved the smell of machine oil in the shop, really brought back some memories of hanging out with my grandfather. I chose this small carbon gyuto from Ashi to slot in between a 240mm gyuto and a 150mm petty by them I already own, both in stainless.

Loved going to Baba Hamono, service was great and I actually visited a few times during the day as I shopped around. I was specifically hunting for a 210mm k-tip in Ginsan and this kagekiyo was my favorite that I held throughout the day. You may notice I did not get the Urushi handle standard on this series. I was heartbroken when I went back later in the day to purchase this knife and they had it on the sharpening wheel for another customer who was waiting. Luckily they had a few more in the back that were un-handled and I was given a choice of 6 or so different options including the Urushi. I personally preferred the feel and balance of this walnut handle to the thinner profile of the Urushi. They told me to come back in another hour and I had exactly what I wanted out of my trip along with purchasing another knife for a friend.

Enami Hamono was cool. My wife had gotten into researching some makers with me leading up to the trip and was sure she wanted to visit Enami. We did not make an appointment here and you probably should do so before you visit. We walked into a dark blacksmith shop where his assistant was doing some grinding and Enami himself was forging. I apologized for not making an appointment and asked if we could see any santoku they had in stock. The assistant un-folded a table and brought out 4 different options, 2 fancier Damascus options and 2 less expensive carbon options. My wife liked the chunky profile on this carbon example so we went with this one, it’s less refined but I think will be a great home performer. He then let my wife select a handle from a box of options and told us the knife would be ready in an hour or so.

I went to knife shops every day we were in Japan and had great experiences talking to some makers. After the first few days I started to realize that most of the shops were tourist focused and all selling the same products. The Sakai shops were all great and additionally I enjoyed Jikko, they are scattered around the touristy areas but I thought their knives were much nicer than most of the tourist focused shops, the Sakai branch had a great selection and I bought some handles for a couple of older blades in my collection. Tower knives in Osaka was great and we had fun talking to the bartenders at their taproom next door. Hitohira in Tokyo was also great and had a lot of natural stones to peruse. Mizuno Tanrenjo had a small but very nice selection of their carbon knives, we just bought a pair of scissors here but they still offered to show us around the back and were super friendly. I wish I had made the time to visit Sukenari in Nagoya but just couldn’t make it work with our itinerary.


r/TrueChefKnives • • 8h ago

State of the collection NKD 😂

Thumbnail
gallery
56 Upvotes

Following a little reddit deep dive on cheap knives that are really good, I took the plunge and spent 8 quid at a Thai grocery store for this. I can't imagine the edge lasting more than a few chops, but holy cow its a little laser. 😂 Perfect for those days when i really cba looking after a Japanese knife!


r/TrueChefKnives • • 3h ago

Giant Daily Driver

Post image
21 Upvotes

[270mm Yu Kurosaki Gekko]

My work kit is packed up and headed back home and I had to pick one knife to get me through the next week until I get back home.

So…. I picked my obnoxiously big Kurosaki. It’s “technically” a 270mm, but handle to tip length is actually 290mm….

Low-maintenance stainless, holds a great edge and big enough for all my protein fabrication (see halibut pic). Plus it’s long and thin enough that I can use it for slicing.

So, let’s see what it’s like to daily this thing for a week.


r/TrueChefKnives • • 17h ago

Maker post Making a Wa handle out of Gidgee.

165 Upvotes

Hello fellow kitchen knife enjoyers. I am starting a series where I attempt to make kitchen knife handles out of every type of wood I can get my hands on. I will be focusing primarily on Wa handles. I hope you will find the information useful!

Always happy to answer any questions!


r/TrueChefKnives • • 3h ago

Question What’s a knife that fell out of rotation for you only to make a fierce comeback?

Post image
10 Upvotes

Rule number 5
Morihei- Hisamoto
210 mm
White number 2 (shirogami)
Iron clad
Kurochi finish
Blade height : 60mm
Weight : 225grams

Context - I got this knife 3 years ago now. I wanted to like it but it never jived with me. The grind is a bit wonky and it’s rather thick. I got it at a time I knew much less than I do now.

I have a tendency to favor longer knives. This was a fun first intro to a white steel but I did not think this justified the price tag and slowly the knife fell out of rotation for me.

Eventually I decided to use it as my project knife for thinning and polishing. I learned alot on this knife and made some serious improvements in my technique.

I did my best to thin this knife and then repolish in my synthetics and I was happy with the results. It still wedges in taller denser ingredients because of the spine thickness but I was happy.

Still it did not crack back into my rotation so I decided to sell it. I must have asked too much. Cause no one bit and I let the post die with nothing more than a few good lucks.

2 weeks ago I decided to grab it to run through some quick prep. I’m thinking about gifting it to a good friend and wanted to try it again.

Wow I was blown away by how fun it was. I swear the edge might not stick around that long but nothing gets as sharp as white 2.

Maybe it has just been the novelty of using a shorter knife again but I haven’t put this thing down for ver the last 2 weeks for my quick prep. I am also pleased with how my kasumi is holding up. I have come full circle on this knife.


r/TrueChefKnives • • 12h ago

NKD: Simon Maillet Gyuto

Thumbnail
gallery
41 Upvotes

Hey everyone,

I think we might have a little series on our hands. Scsuede inspired me to do these write-ups, and I feel that Western makers tend to get a little less of the spotlight here.

Anyway, here we go! This is a true NKD, since I received this knife last week and have been putting it to use ever since. As a Frenchman, Simon’s work has been sparking my interest for quite a while now. I hadn’t pulled the trigger yet, but I failed to restrain myself when this one came up.

Specs :

Blacksmith: Simon Maillet

Steel: 135Cr3

Dimensions: 220 × 51 mm

Weight: 175 g

Handle: D-shaped Tasmanian blackwood

Taper: 5.1 / 2.3 / 0.9 mm

This particular knife was polished by its previous owner, and it is just stunning to me. It has some lovely wrought details that carry into the very clean kurouchi finish. When I talked to Simon about this knife, which he remembered, he said the kurouchi itself is finer than on a typical work because it was done without the usual use of clay. This results in better cutting performance, but supposedly slightly less food release.

On the board, I really like the specs of this knife. I feel like the community, at least when it comes to Western makers, is increasingly chasing knives that are 250 mm or longer and 58 mm tall or more. That isn’t really my thing, so this more nimble knife feels perfect in my hand and is more than sufficient for most everyday tasks.

In terms of performance, I tested this bad boy on carrots, onions, potatoes, green onions, and bell peppers. It performed extremely well on all of them. There were some audible cracks when cutting large chunks of carrot, which was to be expected, but absolutely no wedging. I also made some julienne cuts, and man, the feeling was perfect: very clean and effortless cuts.

The most challenging and surprising produce was the batch of potatoes I had. They were large and firm, so they put up quite a fight when I cut them in half. Again, there was some cracking, but no wedging at all. The nice taper leading into a thin tip also works really well for dicing onions, which is something I do a lot.

I mentioned that food release might be lacking because of the finer kurouchi finish, but it is still outstanding to me. This thing is on par with, or perhaps even better than, my Mario Mattia blade, and Mario is known for working miracles when it comes to food release.

All in all, this is a very nice addition to my collection. I recently let my Guirec go, so I’m putting a French blade straight back into the kit. I can only recommend trying Simon’s work, and he’s a really cool guy on top of that!

I’m getting another French blade at the end of the week, hopefully, so more NKDs should be coming soon!

Thanks for reading.

Cheers, everyone!


r/TrueChefKnives • • 1h ago

Takeda Banno-Petit 140 back from regrind

Thumbnail
gallery
• Upvotes

Waiting until this evening to give it a go, but I just got my 20 year old Petit back from District Cutlery, reground. I'm pretty happy so far.


r/TrueChefKnives • • 32m ago

Shibazi F03-2 Chinese Chef’s Knife (桑刀)

Thumbnail
gallery
• Upvotes

I understand this sub likely gets bored with posts like this, but fuck it I just love this knife. This is my second stint with this knife, it’s a thinner and lighter version of the F208. Quality control is a bit inconsistent with Shibazi knives as far as cosmetics go. This one arrived with a few bends but nothing that couldn’t be quickly fixed. I find it a fair trade given the price, this one was $35 USD and everything else you’re provided makes up for it. Heat treat is consistent, the 80cr13 core steel holds up to professional use and sharpens similarly to a lot of quality reactive steels. For $35, it’s hard to beat this grind. Had to make a spot in my growing collection, wish we talked about Chinese knives more here. The specs are:

324 grams
2mm blade thickness
58-59 HRC
80cr13 core steel


r/TrueChefKnives • • 1h ago

Defect/damaged or not

Thumbnail
gallery
• Upvotes

Received this myojin riki deba 180 shirasagi blue 2 from knives and stone. Not sure if the tip was damaged or a defect but need a second opinion to see if i should get it returned or something thanks!


r/TrueChefKnives • • 9h ago

Giant carrot!

Thumbnail gallery
10 Upvotes

I want to cut this so bad!! What would you guys use? I think my new Hakata would make quick work of it.


r/TrueChefKnives • • 3h ago

NSD - White Natsuya + Tsushima Nagurs

2 Upvotes

Purchased both from Strata today. Never seen a white Natsuya before and I think it’s bad ass. Having this line up is now going to make my lower grit polishing sequence even better, especially that I can do more on JNATs and set aside the synthetics.

I’ll probably start finishing my edges on the Natsuya too!

Edit: typo in the title… Nagura not nagurs.


r/TrueChefKnives • • 3h ago

Looking for nice fillet knife as a gift.

2 Upvotes

My friend is a fishing guide for salmon and he likes a 7ish inch fillet knife. I was looking at north arm out of British Columbia they have a 6 inch he also uses for hunting. Wanted something with decent edge retention hence why the magnacut seemed a nice balance.


r/TrueChefKnives • • 1d ago

NKD - Tetsujin Special 240mm Hon-Sanmai Damascus Gyuto

Thumbnail
gallery
137 Upvotes

Hey all!

It's been a while since my last one. I've been abroad for the last couple weeks, so I was finally able to pick up my acquisition from the Knifewear sale. First off, some specs about the knife:

  • Core Steel: Blue #2
  • Cladding: hand laminated iron damascus
  • Blade length: 231mm
  • Heel height: 49mm
  • Spine thickness at handle/heel/middle/1cm from tip - 2.9mm/2.8mm/2.5mm/0.4mm
  • Balance point: 15mm from the handle

Some initial impressions:

The cladding on this is stunning with the individual damascus layers catching the light differently. Tamura-san basically picks a unique selection of steel to execute this. It's also pretty cool to pick this one up from Knifewear, given that Tamura-san previously worked there before jointly starting Tetsujin with Myojin-san. The geometry on this is rather thin too, with a sub 3mm spine thickness. I did a couple test cuts and it’s basically what you can expect from Myojin. The kireaji can be described as smooth and sterile, while being whisper quiet even splitting a carrot down the middle. It wasn’t too sticky compared to the other Myojin knives I’ve tried in the past, even with the lacquer still on. However, time will tell once I put it through a proper prep session or two. Profile wise, it's closer to my Tanaka x Izo given the smaller flat spot at the heel, though it does have a higher sweep closer to the tip. As for the balance, it is somewhat handle heavy with the balance point only 15mm away from it. This is usually right behind my pinch grip, so I may consider a lighter handle material. I'm a big fan of how the Kikuchiyo x Izo is balanced with the slim cedar Taihei handle, so maybe another cedar handle is in the future for this one.

Given how a lot of these Tetsujin specials are one offs or produced in extremely limited volume, it's not always easy to find similar examples out in the wild. This one likely won’t be a regularly produced Tetsujin line. Thanks to /u/Ok-Distribution-9591, I can say that this one is similar to the one Ivan polished a couple months back (while keeping Myojin's work on the other side). Additionally, Syoukon did release another one a couple weeks right before the knifewear sale. I'm also aware of a Tetsujin SP Sujihiki we saw from the Ai & Om anniversary sale that is also hand laminated damascus, but with a significantly different lamination pattern. Of course there's also the Lightning and the Rentetsu cladding (which i'm not sure if they're getting the SP designation). If there's anything I missed here, feel free to contribute.

With that out of the way, hopefully you all enjoy the write up and pictures! I do have a couple of review and update posts queued up, so stay tuned!


r/TrueChefKnives • • 36m ago

What knife set to buy?

• Upvotes

Hi i have recently moved out for the first time, and looking for a quality knife set, i hate knifes that cant cut properly. I have been looking for a knife set that is good, with a wood looking handle and looks cool, like the japanese knives. But everytime i find one and check an actual review they just say dont get this its not good. Can anyone help me here my price range is up to 300 euro. I would really like some help


r/TrueChefKnives • • 3h ago

Question Moritaka Aogami Super Nakiri

Thumbnail
gallery
1 Upvotes

Just got this one! Is this normal for a Moritaka Aogami Super Nakiri? The tang doesn’t seem to fit very flush into the handle, and there’s quite a bit of visible filler around it.

Is this normal, or is it a quality control issue?


r/TrueChefKnives • • 1d ago

Maker post R/chefknives travel: I visited the workshop of Miyazaki Kajiya in Goto, Japan for a VERY special occasion

Thumbnail
gallery
203 Upvotes

Hello TCK,

In another installment of this travel series, I was lucky enough to be invited to visit the workshop of Miyazaki Tanrenjo in the Fukue Islands off the coast of Nagasaki for a very special personal occasion of mine back in October.

More on that later.

Haruki Miyazaki

For those who are unfamiliar with Miyazaki-San’s work, he is a 35 year old blacksmith trained under Toshio Oba of Fukuoka. Miyazaki-San is known as one of the few blacksmiths in Japan that still practices an ancient form of Japanese forging; Hon Warikomi. This is a method that split-welds an extra soft, low carbon iron shell (often tartara iron sourced from reclaimed materials) with an insert of hard inner steel (hagane) before being drawn out and thinned.

Miyazaki-San is also unique in the sense that his practice is truly a one man forge-to-finish. He sources every component that goes into his forging and finishing, from felling trees in the summer to generate his own pine charcoal for hardening, to mixing his own custom flux composition.

Miyazaki-San was kind enough to demonstrate a Hon Warikomi technique, which he used to create my custom order; a 170mm Tsubaki blade with a Aogami Blue 2 carbon steel core.

The Tsubaki

The Tsubaki shape is a variation of a Hakata shaped knife (an all purpose knife shape unique to the Fukuoka region) and only two smiths are known to shape knives this way: Toshio Oba and Miyazaki-San himself. A Tsubaki features a parabolic spine (unlike a bunka) with a drop-pointed tip and a relatively flat belly along the edge.

Because the shape was so distinct to Miyazaki-san’s background, I opted for this profile.

The Special Occasion

My wedding! I was married in Hakone at the tail end of October, and I had contacted Miyazaki-San very long in advance to join his queue of custom orders to create a knife for my wedding cake cutting ceremony. As a knife nerd, I thought it was fitting to have something special (to me) for this ceremony, and Miyazaki luckily agreed to assist!

It was a beautiful ceremony at the foot of Mt Fuji made even more beautiful by this special knife.

I’ll do a more in depth write up of this knife a bit later, but I want to give a huge thank you to Miyazaki-San, who is one of the kindest and most welcoming humans I have ever come across and his wonderful wife for showing me around Goto Island.

Shape: Tsubaki

Length: 170mm

Construction: Hon Warikomi (Soft-Iron clad)

Core: Aogami #2 (Blue Paper Steel #2), water-quenched

Handle: Wa Octagonal oak burl wood with silver accents and a white buffalo-horn ferrule

Previous travel posts:

Takada No Hamono - Sakai Japan 2022

Nigara Hamono - Aomori, Japan 2024

CCK - Hong Kong 2024

Windmuhlenmesser - Solingen, Germany 2025

Mystery Yanagiba - Tokyo Flea Market 2025


r/TrueChefKnives • • 5h ago

Question Need help with knife carbon steel

Thumbnail
gallery
1 Upvotes

Bought this in Japan, only used it a few times and dried it right after. Somehow erosion and blemishes appeared on the knife. Anything I'm doing wrong?

edit: Thanks for the reactions guys, good to find out this is normal.


r/TrueChefKnives • • 21h ago

HK Kaijin Blue #2 Patina

19 Upvotes

This knife got a much more hardcore patina than my other blue 2 knife. I sliced warm protein with it on day one, and a roast today. You think that's it or does this steel just vary a lot from knife to knife?


r/TrueChefKnives • • 21h ago

NKSD!

Thumbnail
gallery
19 Upvotes

Got a couple new knives in, and one that I picked up a couple weeks ago!
Got a Hatsukokoro Shinkiro AS 210, my first (for me) expensive knife purchase and I love it. Made dinner with it tonight and it’s already getting a nice patina! Cutlery and more had it on Black Friday so I convinced myself now was the time to grab it, and I’m thrilled I did because it’s a dream. I love the more subtle Damascus pattern on it.

Second one is a Yu Kurosaki Kokusen stainless clad AS bunka 165. I’ve used it several times since I got it a couple weeks ago, and it’s a blast to use.

Third is a Wustof 6in, grabbed this one as I wanted a good knife that I could use for tougher things when needed, and so my wife has a knife she can that I’m not worried about her destroying 😂.


r/TrueChefKnives • • 5h ago

Shun Chef Knife or Santoku?

1 Upvotes

I am trying to decide between the Shun 5.5” Premier Santoku and the Shun 6” Premier Chefs Knife. Which do you think would be the better option? The price is a non factor with these 2


r/TrueChefKnives • • 18h ago

Did Bozeman Kives ruin my knive?

Thumbnail
gallery
8 Upvotes

This is what my knives looked like after they were sharpened. I don't have fancy knives, except for the nice Japanese one. Even the Global, which was returned nice and sharp, has sharpening marks all over the blade. Tell me that's normal and I will settle down. There are literally chips out of my $400 Japanese knife. Kindly advise before I blow a gasket. Thanks in advance to this fine community. PS, this company changed hands recently, after a Seattle famous knife sharpener sold it.


r/TrueChefKnives • • 19h ago

Question looking for recommendations

4 Upvotes

hi i know nothing about knives and im looking to gift a nice big fat knife to my uncle for christmas. price ranging from around $70-$100, preferably a japanese brand that looks cool but also works well. he loves grilling meats if thats helpful info?? i dont want a set, just one large knife that looks good as a gift. thank you!!!!


r/TrueChefKnives • • 1d ago

NKD - Sakai Kikumori Choyo Ginsan Santoku 180mm

Thumbnail
gallery
31 Upvotes

Really excited to post, as this is my first “real” nice chef knife after getting into this hobby over the last year. I’ve really wanted a santoku or a ginsan knife, and when I saw this piece come up on Chefs Edge I figured no better time than now to take a big jump!

I really love the sharpness and edge on this knife, but I will say that beautiful mirror polish is so difficult to keep clean. Very satisfied overall though!


r/TrueChefKnives • • 13h ago

Question Ordered blunt Pallares Knives..?

Thumbnail
gallery
1 Upvotes

Hi, I ordered 2 (22cm and 11cm) Pallares knives from a store that’s based in Barcelona Comerical Rodriguez.

Both knives arrived in some strange DIY wrapped packaging and they are both super blunt, can’t even cut through paper comfortable. Additionally, the larger knife has marks and what looks like glue around where the handle and the metal meet (see photo). Overall they do not look pristine at all or as though I’ve ordered new knives. They look a bit old and also aren’t even sharp. The shop lists itself as an official supplier of these knives, yet they seem old.

This is my first time buying knives. Should I send them back? Is this normal?


r/TrueChefKnives • • 1d ago

NKD - Nigara anmon SG2 210mm gyuto

Thumbnail
gallery
42 Upvotes

Picked up a Nigara anmon from the recent Chefs Edge black friday sales. I absolutely love the raindrop damascus and have been wanting one for a while, and serves as a nice statement and celebratory piece as an enthusiast home cook. Was torn between this dark maple and carbon fibre handle options but after handling it in person I've definitely made the right choice.

I'm aware of the mixed views about it's performance vs cost and have found that as others have pointed out the Damascus appears to cause more than ideal stickage, but it's an absolute thing of beauty!!