r/WorkBoots • • 7h ago

Boots Goofin (Pictures, Clips) Yearly Boot Claim

Post image
5 Upvotes

Just wanted to share my story

Here are my work boots for the job i work - i work shipping receiving at a electrical wholesaler. On my feet pretty much the whole day on a concrete floor, outside in the compound and driving the forklift when needed

The first set (far left) we actually from my previous job. I managed the barbeque/outdoor cooking department at a local hardware store. I unloaded freight shipments in them and since the boots were supplied by my work i chose a set of safety toe boots (didn't need 200 Lb+ grills dropping on my feet). I found with the Original Swat Brand that with daily use i was replacing them yearly as the treads were gone by then. They did last almost a year at my new job but became uncomfortable to walk in all day long - i did upgrade the insoles half a year in due to the stock insoles sucked - that bought me more time in them. These boots did their job when my coworker had a 50pc bundle of electrical strut topple off the forklift and onto the toe of my boot. Inside you can feel a bend in the toe where the impact was.

The second set (middle) are my Blundstones #168 Model. My current job has a yearly boot claim for all the staff. It was coming up on the end of the fiscal year and i thought I would utilize it. I liked how my wife's Blundstones looked and she said they were comfortable. They took a few months for the leather to work into my feet where the top of my foot didn't feel funny from the pressure (i have high arches). They are ok and work great for my daily tasks. I like being able to slip them on and off. I like that these don't look like a "work boot" and i can wear them other places. I lime having the rubber toe cap because from my last job i developed a habit of using the toe of my boots to move items to the spot i want them and the toe of my boots wear out quick if there isn't something to take the abuse.

The last set (right side) are this year's boot claim - Redback Bobcats. I like the chelsea boot style and did some research and saw that for the same price as my Blundstones i could get a set of Redbacks. The leather is thicker, the come with a better quality insole and they are made in Australia. I know from breaking in the Blundstones, to have a broken in pair of boots on hand to swap to. Pretty much the Blundstones will be my backup pair at work for those times that my boots get wet (happens sometimes when i am stomping around the compound in the winter). I did go up a half size as i found the steel toe in the Blundstones at times could press on the sides of my feet.

Sorry for the long story but hope this helps someone


r/WorkBoots • • 6h ago

Generic Help with boot fit

Post image
4 Upvotes

So I have been given a pair of Oregon Yukon boots a forestry course but they are a size too big (I’m a 5.5) these are a 6.5 and they don’t come in a smaller size. And the company is not willing to pay the extra for the boots that do come in my size is there any way o can get these to fit better? TIA


r/WorkBoots • • 9h ago

Boots Buying Help women’s steel/composite toe boot suggestions?

Thumbnail
gallery
3 Upvotes

hi! i’m a woman and i’m getting new work boots and wanted some help choosing between these two:

-Redwing Traction Tred Lite 5 inch safety boot
-Jim Green Razorback Composite Toe Cap

i currently wear the timberland pro6 steel toe boots. i like the look and how comfortable they are but i want to upgrade. appreciate any input on which of those two I should go for or if you have better suggestions please lmk! (budget is $300)


r/WorkBoots • • 16h ago

Boots Buying Help Steel toe/ composite toe for factory work

6 Upvotes

Been wearing boots but they seem overkill for what I do and too heavy. I work in a factory and move a lot. Most of the time I’m doing fast paced things so I some steel toe reeboks. They’re wearing out and I’ve recently started occasion welding also. Trying to find something that will hold up with welding but also comfortable and light enough for fast paced work


r/WorkBoots • • 5h ago

Boots Buying Help Does anyone know if they make work boots like this?

0 Upvotes

r/WorkBoots • • 16h ago

Boots Buying Help Men's Carolina Boots Socket 5" Aspen Safety Toe Waterpoof Work Boots

Thumbnail shoecarnival.com
1 Upvotes

Thoughts on this boot? I’ve worn everything from Wolverine, danner, White, Irish stter, red wing, doc martin (lace ups and slip on) I love my work boots and I recently started going to meetings instead of welding in the field … 7/12s plus teaching two nights I rotate my boots I want these for the office.


r/WorkBoots • • 17h ago

Boots Buying Help How do the Irish Setter Insulated 9” Wingshooter perform in the snow?

1 Upvotes

Hi everyone, I specialize in Exterior Carpentry and work outside all winter and am looking for a moctoe boot that still handles well in the snow.
How does the Irish Setter Insulated Wingshooter 9” perform in the snow? How is the traction? Will I be slipping and sliding around? Any cons?
I live in the mountains so basically work in the snow for almost 6 months straight and want a solid snow work boot.
Thanks a lot!


r/WorkBoots • • 1d ago

Boots Buying Help Purchase advice

Post image
8 Upvotes

I’ve been needing new work boots for a while now but have been trying to hold off for Danner Black Friday sale for a pair of bull runs. I haven’t worn wolverines for a long time now but I see people say their higher quality boots are ok. Does anyone have experience with these? Seems like a pretty good deal, but with Black Friday right around the corner I’m not sure if I should just wait for the Danner sale. I’m a commercial glazier and although I’ve been a shop guy for the past year I’m normally on commercial job sites where terrain can be less than ideal. Any advice or input is appreciated.


r/WorkBoots • • 1d ago

Boots Buying Help Looking for new 6” safety toe work boots. Any recommendations?

3 Upvotes

Looking for a new pair of safety toe boots. I work in a manufacturing environment, but nothing heavy duty. I’m sitting most of the day, safety toes are just required.

My feet naturally sweat a lot, so I’m not sure if waterproof boots would make that worse. Breathability is definitely a priority.

I prefer the look of 6” boots, but don’t want anything too bulky or heavy duty. I like boots like the Danner Bull Run, but feel like they might be a little much for my work environment. I’d rather have something more low-key that doesn’t stand out too much.

I’ve been wearing Keen San Joses for a while now. They’re decent, but I’ve gone through two pairs and want to try something different.
A few I’ve been looking at:

Red Wing SuperSole 2.0

Merrell Moab Speed 2 6”

Danner Caliper 6”

GORUCK MACV-2 Mid (really like the look, but they might stand out too much)

Anyone have experience with these or recommendations for something similar? Mainly looking for comfort, breathability, and a relatively lightweight boot that still looks good.


r/WorkBoots • • 1d ago

Boot maintenance Heel savers?

1 Upvotes

Anybody have any luck using them?

I wear out the outside rear of my heel long before the rest of the sole, let alone the boot itself.

I see all kinds from glue on strips of rubber to metal.

I can't have metal, boots must be EH.


r/WorkBoots • • 1d ago

Boots Buying Help Red wing help

1 Upvotes

I tried on a pair of king toes at redwing and they felt great but I have plantar fasciitis and they seem to put weight on my heels and almost instantly got a burning feeling even with my orthotics in. Wondering if they’re are any similar red wing or Irish setter boots like them that don’t do that or are better for pf. I’m between a size 8 and 8.5 and the wides feel loose in the heel but regulars squeeze my toes in most there boots


r/WorkBoots • • 1d ago

Boot Review | Update Liberty vs heritage thorogood

Thumbnail
gallery
19 Upvotes

Just wanted to show folks comparisons I know there is not a lot on the Keens.

12 wides in both. My thorogoods are 3 months old just got the keens today


r/WorkBoots • • 1d ago

Boots Buying Help Best work boots for a shovel

8 Upvotes

r/WorkBoots • • 1d ago

Boots Buying Help ISO perfect work boot for snow

3 Upvotes

Hi! I work at a ski resort which can have me standing in snow covered terrain for up to 6 hours at a stretch. I'm looking for a boot which will keep me warm (with heated socks I already own) and are lightweight because I need to carry them on a chairlift in my avalanche bag to get to my workstation. The ones I use now are good enough, but a little bulky and hurt my back after standing on snow all day. Thanks!


r/WorkBoots • • 2d ago

Generic BOTD

Post image
25 Upvotes

Ariat big rig boa


r/WorkBoots • • 2d ago

Boots Buying Help Work Boot Rec for Landscaper

3 Upvotes

Hey all, wondering if I could get some reasonable priced (~$200) work boots recommendations for my guy. He is a landscaper and doesn’t typically like “super bulky” work boots. Right now he’s been wearing lace up ariat cowboy boots technically, but the traction was trash. He gets pretty muddy some days, hot in the summertime as well.

I was hoping to get them around Black Friday. I was looking at Brunt’s, but they seem kinda bulky and I’ve heard they don’t hold up well. Do any tradesmen have thoughts?

Thanks in advance.


r/WorkBoots • • 2d ago

Boots Buying Help Boots

2 Upvotes

Looking for recommendations on slip on waterproof, slip resistant, composite toe work boots. I wash flour transport trailers for living need something comfy and durable and safe. Budget is $300 max


r/WorkBoots • • 2d ago

Boots Buying Help Recommendations for new boots

7 Upvotes

Hi. I have to buy my first pair of steel toe work boots in a very long time. I am training as a sawyer with my county forest preserve in Illinois. We were told we need steel toe work boots with black soles. Whereas I won’t be wearing these daily, if I’m investing once I want to make it worth while. Ideally I want waterproof since they will get used year round. I’ve done some research and it seems that Thorogood, Red Wing, Danner and Georgia all have great boots. Does anyone have suggestions? I like the idea of a resole-able boot too.


r/WorkBoots • • 2d ago

Boots Buying Help Are there any classic looking round-toe safety-toe work boots that aren't $800?

2 Upvotes

I'm searching for a holy grail that I suspect might not exist anymore but that I feel like should be very common. I can't do most moc-toe boots: I neither like the look, nor does my pinky toe fit. I've tried wides and size-ups but most moc-toes inexplicably taper towards the front a ton. I'm wearing Tecovas moc-toe workboots as of late, and I really like them, but I need a second pair of boots and I inevitably want to switch to round-toes.

Now I did run the gammut of round-toes at my local boot stores, but unless I'm trying to go for pull-overs, which I'm not because I enjoy the ankle support of lace-ups, most look kind of hyper-modern, most are leather-synthetic material build mixtures, and I just don't like how they look. I like White's, Nick's, Vibergs, the style of a lot of the PNW boot companies a lot. I like the sort of classic sillhouette and exclusively leather outside. I like that they're round toes with composite or steel. I don't like that they're $800 dollars. I work on ships, and my boots go through some shit. I get krill biomass, algae, I'm hitting them on and walking on steel surfaces all day, and even with regular maintenance the diesel and the oil and the cleaning chemicals eat away at them over time. I can't justify $800 for boots that'll last me a year or a year and a half.

With that said, is there anything that might fit my specifications closer to a $200-400 range?


r/WorkBoots • • 3d ago

Boots Buying Help Baffin or Dunlop?

4 Upvotes

r/WorkBoots • • 3d ago

Boots Buying Help Need some recommendations for some new square toes

3 Upvotes

I’m a diesel mechanic and my work gives me a voucher every year to buy new boots. I really like wearing square toe Wellington boots, I currently have Ariat Workhogs that I’ve had for going on two years and I love them. But I was just thinking of changing it up. So, I’m looking for some recommendations


r/WorkBoots • • 4d ago

Boots Goofin (Pictures, Clips) New boots for cargo ship work

Post image
60 Upvotes

So far very impressed with the timberland pro boondock boots working onboard a cargo ship. I used to wear slip on western style workboots but those don’t provide much support.


r/WorkBoots • • 4d ago

Boots Goofin (Pictures, Clips) Carolina 7505 AMP Series

Post image
68 Upvotes

So I’m normally a moc toe guys but I got these bad boys on a discount because at my local boot store someone ordered them and never picked them up normally $230 got them for $170. I’ve worn them for 3 days now so here’s my first impressions. First, I have fairly wide feet and I’ve worn thorogoods and they fit good or so I thought I put these on and realized how narrow thorogoods are. Second, they are my first 8in boot and they are the Old Town Folklore leather they are much stiffer than I’m used to ,not a bad thing just an observation, but they are breaking in nicely! Third, the leather smell is strong and oh man is it good! I will share a later update as I haven’t seen any reviews or much from anyone on these boots.


r/WorkBoots • • 4d ago

Boots Buying Help Needs Recs: Grocery Sales Floor

1 Upvotes

Been using Shoes For Crews as my daily drivers since high school in 2003 (can't remember the name of the first shoes but switched to Voyager in 2004 then Rowan around 2015-16). Got hired into Albertsons in 2019, and I went from my boots lasting 3ish years down to a little over a year because I wear holes through the soles in the ball of the foot due to clocking over 3000 miles across asbestos flooring, concrete and asphalt for 40hrs/week (minimum 60 miles per week). And because I was raised to be frugal when at all possible, I would buy my boots during their 30% off Bliack Friday sale then put them away until I needed to replace my current pair.

Queue this year: switched to my backup pair last August after vacation and everything seemed fine except for some pain in the balls of my feet not going away after the break-in period. Was tolerable so didn't bother thinking too hard about it. Issue came up though around Halloween when I found my right boot was getting water inside despite having just conditioned+oiled them a few days before. Discovered that SfC went bankrupt in 2024 & the new owners have cut corners in multiple product lines to reduce production cost while raising prices - for both the Voyager & Rowan lines, that meant axing the shank that used to run the arch. This budget cut paired with the crappy redesign of the sole has led to a crack developing between the ball of the sole & the perimeter of the ball that has progressed to a full-blown hole allowing water & debris into the boot - after less than 3 months of use. I caled in but the Customer Service Rep said that my only option was to buy new boots because I was past the warranty date.

I'm willing to give them one last chance because they still have a single line of boots that meets my needs (Providence), but I need to have a backup in case this last chance is also a shit sandwich. My needs are:

* Steel toe - personal safety, both because of how frequently I deal with pallets weighing up to an actual ton & bumping my feet against things like uboats/flatbeds/carts

* Steel shank - not sure how effective fiberglass shanks are as anti-puncture protection; arch support plus protection from shit that can jab through a basic rubber sole if I'm not careful

* Ankle support - comes up over the ankle instead of stopping below like regular shoes, lots of heavy lifting plus needing to establish/maintain solid foot placement

* Slip-resist - because I can find myself dealing with spills, puddles and any other instance of wet floors at the drop of a hat, company policy explicitly states that every single store-level employee must have slio-resistant footwear so long as they are on the clock

* Sturdy/durable soles - as I mentioned, I walk over 3000 miles per year for my job across multiple unforgiving surfaces, so the sole needs to be able to handle that; if the boots are designed so that a repair shop could replace the soles with minimal difficulty, that'd be a plus & make me inclined to spending a bit more

I also prefer my boots to be black both for a more professional look and because I wear a black kilt+long compression socks for work. The insole isn't a big deal because I'm going to be removing it anyway for the custom-made orthodic inserts my podiatrist gets me annually.

Any help in this struggle is appreciated.