r/WorkBoots • • 1h ago

Boot maintenance How I keep my feet dry in work boots during long shifts

Post image
• Upvotes

I’ve worked in agriculture for years, spending most of my day in safety boots. Between operating equipment, moving seed bags and climbing grain silos, sweaty feet are something I’ve had to deal with regularly.

Here’s the routine that works for me.

Before work
Start with completely dry feet.
Put a small amount of body powder inside clean socks before putting them on. GAME CHANGER. You can put some in your boots, but it’s inside the socks between the skin and fabric that makes the difference!
Make sure your boots are completely dry from the previous shift.
Choose moisture-wicking socks that fit comfortably.

During work
I always recommend keeping a couple of extra pairs of socks handy. If your feet are getting uncomfortable by lunchtime, changing into fresh socks makes a difference.
Adding more powder to already soaked socks isn’t the solution. Dry your feet first and start fresh.

After work
Loosen your boots so they can air out.
Remove the insoles if possible.
Consider a compatible boot dryer or rotating between two pairs of boots. I have two boot dryers at work and myself and the other 3 yard operators absolutely love it now too! KEEP THOSE FEET FRESH AND DRY!

Full disclosure: I own MANDUST, a Canadian body powder company. I was using body powder in my work boots before I purchased the business in 2023.
Powder won’t stop your feet from sweating, but I’ve found it useful for managing moisture and staying comfortable.

I’m curious what everyone else does. Are you guys using foot powder, merino wool socks, boot dryers, or a combination of all three?


r/WorkBoots • • 4h ago

Generic I work in a kitchen and the required shoe they gave was new balance but the insole are not to great. What are some really good insole options i can get to help me be on my feet more since im standing and waking around all day. Im in the heavy side as well looking for comfort.

5 Upvotes

r/WorkBoots • • 19h ago

Boot Rant Irish Setters

Post image
51 Upvotes

I always see tons of bad reviews on here for Irish setters/red wings and I’ll say I’ve had the opposite experience. First pair of these I’ve owned and lasted me 3 years. Mixture of commercial well drilling, baseball fieldwork, and turfcare landscaping. Many will say they do tougher work and they wouldn’t last blah blah blah. All I’m saying is that I wasn’t dancing around cubicles and these things lasted me a good while. Could probably get another 6 months out of em but my job gave me a voucher so I snagged a fresh pair.


r/WorkBoots • • 3h ago

Specific Model Question | Info Question about timberland pro rigmaster 8" steel toe

2 Upvotes

Recently I'm thinking about getting myself a pair of rigmaster 8" steel toe work boots as they look stylish (sorry for being poser..). I would like to ask how do people feel about them length wise and width wise?

I know that there is a sizing chart but timberland pro sizing seem to very from shoe to shoe.

My feet measures 10.04" (25.5cm) in length and 3.82" (9.7cm) in width, was wondering if a 7.5medium would work.

Thanks in advance!

here's the link https://www.timberland.com/en-us/p/timberland-pro/mens-footwear-10171/mens-rigmaster-8-steel-toe-waterproof-work-boot-TB195553214?width=M&size=070


r/WorkBoots • • 3h ago

Boots Buying Help Need steel toe waterproof boot recs

2 Upvotes

I work at the airport on the ramp (concrete). We’re experiencing heavy rain via storm so my feet have been soaking wet the last few days with the boots I got thru work (Wolverine).

I need steel toe absolutely waterproof boots. I came across redwing supersoles with goretex and thought those would be a good purchase but see some reviews saying the quality has gone down in the last few years.

Anyone have recs? I’d prefer a boot that lasts 3+ years. I’ll have other boots to wear when it’s not raining or wet out but need a good waterproof pair.


r/WorkBoots • • 16m ago

Generic Showing off my JK Climber boots.

Thumbnail
gallery
• Upvotes

I have about 24 hours of wear on these guys and they feel like they're going to break in nicely!

Anyone else have a pair of Climber boots? What are your experiences? Any other climbing boots that you prefer!?


r/WorkBoots • • 20h ago

Boots Buying Help Moving away from redwings and need suggestions

14 Upvotes

I'm a welder who's been wearing redwing boots for years, but the last two pairs have worn out well within a year of normal use and I'm looking for a change. I got a pair of brunt boots for free from my job but they are pretty uncomfortable and don't feel as high quality as I'm used to


r/WorkBoots • • 17h ago

Boots Buying Help Buying winter boots

2 Upvotes

I am shortly going to buy some winter CSA work boots for snow removal, I'll be outside for a few hours at a time over a 8-10hour period. Currently looking at the Kodiak Black Ice Conqueror 8" Waterproof Work Boot 4TGDBK. Wondering if anyone has experience with them or has other suggestions. I'm working on a ski resort and will have days below -30. Heres the link to the boots I'm eyeing.

https://canada.refineryworkwear.com/products/mens-kodiak-ice-conqueror-8-waterproof-work-boot-4tgdbk?variant=46270477533435&country=CA&currency=CAD&utm_source=chatgpt.com


r/WorkBoots • • 1d ago

Boots Goofin (Pictures, Clips) Yearly Boot Claim

Post image
11 Upvotes

Just wanted to share my story

Here are my work boots for the job i work - i work shipping receiving at a electrical wholesaler. On my feet pretty much the whole day on a concrete floor, outside in the compound and driving the forklift when needed

The first set (far left) we actually from my previous job. I managed the barbeque/outdoor cooking department at a local hardware store. I unloaded freight shipments in them and since the boots were supplied by my work i chose a set of safety toe boots (didn't need 200 Lb+ grills dropping on my feet). I found with the Original Swat Brand that with daily use i was replacing them yearly as the treads were gone by then. They did last almost a year at my new job but became uncomfortable to walk in all day long - i did upgrade the insoles half a year in due to the stock insoles sucked - that bought me more time in them. These boots did their job when my coworker had a 50pc bundle of electrical strut topple off the forklift and onto the toe of my boot. Inside you can feel a bend in the toe where the impact was.

The second set (middle) are my Blundstones #168 Model. My current job has a yearly boot claim for all the staff. It was coming up on the end of the fiscal year and i thought I would utilize it. I liked how my wife's Blundstones looked and she said they were comfortable. They took a few months for the leather to work into my feet where the top of my foot didn't feel funny from the pressure (i have high arches). They are ok and work great for my daily tasks. I like being able to slip them on and off. I like that these don't look like a "work boot" and i can wear them other places. I lime having the rubber toe cap because from my last job i developed a habit of using the toe of my boots to move items to the spot i want them and the toe of my boots wear out quick if there isn't something to take the abuse.

The last set (right side) are this year's boot claim - Redback Bobcats. I like the chelsea boot style and did some research and saw that for the same price as my Blundstones i could get a set of Redbacks. The leather is thicker, the come with a better quality insole and they are made in Australia. I know from breaking in the Blundstones, to have a broken in pair of boots on hand to swap to. Pretty much the Blundstones will be my backup pair at work for those times that my boots get wet (happens sometimes when i am stomping around the compound in the winter). I did go up a half size as i found the steel toe in the Blundstones at times could press on the sides of my feet.

Sorry for the long story but hope this helps someone


r/WorkBoots • • 1d ago

Generic Help with boot fit

Post image
7 Upvotes

So I have been given a pair of Oregon Yukon boots a forestry course but they are a size too big (I’m a 5.5) these are a 6.5 and they don’t come in a smaller size. And the company is not willing to pay the extra for the boots that do come in my size is there any way o can get these to fit better? TIA


r/WorkBoots • • 16h ago

Specific Model Question | Info Is this normal for Danner Bull Run?

0 Upvotes

I just bought my first ever Bull Run boots, the outsole of the boots are not flat, especially close to the heel, I notice it as soon as I tried it on. Danner support told me it’ll be flatten as I wear it, what’s your experience?


r/WorkBoots • • 1d ago

Boots Buying Help women’s steel/composite toe boot suggestions?

Thumbnail
gallery
3 Upvotes

hi! i’m a woman and i’m getting new work boots and wanted some help choosing between these two:

-Redwing Traction Tred Lite 5 inch safety boot
-Jim Green Razorback Composite Toe Cap

i currently wear the timberland pro6 steel toe boots. i like the look and how comfortable they are but i want to upgrade. appreciate any input on which of those two I should go for or if you have better suggestions please lmk! (budget is $300)


r/WorkBoots • • 1d ago

Boots Buying Help Steel toe/ composite toe for factory work

6 Upvotes

Been wearing boots but they seem overkill for what I do and too heavy. I work in a factory and move a lot. Most of the time I’m doing fast paced things so I some steel toe reeboks. They’re wearing out and I’ve recently started occasion welding also. Trying to find something that will hold up with welding but also comfortable and light enough for fast paced work


r/WorkBoots • • 1d ago

Boots Buying Help Does anyone know if they make work boots like this?

0 Upvotes

r/WorkBoots • • 1d ago

Boots Buying Help Men's Carolina Boots Socket 5" Aspen Safety Toe Waterpoof Work Boots

Thumbnail shoecarnival.com
1 Upvotes

Thoughts on this boot? I’ve worn everything from Wolverine, danner, White, Irish stter, red wing, doc martin (lace ups and slip on) I love my work boots and I recently started going to meetings instead of welding in the field … 7/12s plus teaching two nights I rotate my boots I want these for the office.


r/WorkBoots • • 1d ago

Boots Buying Help How do the Irish Setter Insulated 9” Wingshooter perform in the snow?

1 Upvotes

Hi everyone, I specialize in Exterior Carpentry and work outside all winter and am looking for a moctoe boot that still handles well in the snow.
How does the Irish Setter Insulated Wingshooter 9” perform in the snow? How is the traction? Will I be slipping and sliding around? Any cons?
I live in the mountains so basically work in the snow for almost 6 months straight and want a solid snow work boot.
Thanks a lot!


r/WorkBoots • • 2d ago

Boots Buying Help Purchase advice

Post image
8 Upvotes

I’ve been needing new work boots for a while now but have been trying to hold off for Danner Black Friday sale for a pair of bull runs. I haven’t worn wolverines for a long time now but I see people say their higher quality boots are ok. Does anyone have experience with these? Seems like a pretty good deal, but with Black Friday right around the corner I’m not sure if I should just wait for the Danner sale. I’m a commercial glazier and although I’ve been a shop guy for the past year I’m normally on commercial job sites where terrain can be less than ideal. Any advice or input is appreciated.


r/WorkBoots • • 2d ago

Boots Buying Help Looking for new 6” safety toe work boots. Any recommendations?

4 Upvotes

Looking for a new pair of safety toe boots. I work in a manufacturing environment, but nothing heavy duty. I’m sitting most of the day, safety toes are just required.

My feet naturally sweat a lot, so I’m not sure if waterproof boots would make that worse. Breathability is definitely a priority.

I prefer the look of 6” boots, but don’t want anything too bulky or heavy duty. I like boots like the Danner Bull Run, but feel like they might be a little much for my work environment. I’d rather have something more low-key that doesn’t stand out too much.

I’ve been wearing Keen San Joses for a while now. They’re decent, but I’ve gone through two pairs and want to try something different.
A few I’ve been looking at:

Red Wing SuperSole 2.0

Merrell Moab Speed 2 6”

Danner Caliper 6”

GORUCK MACV-2 Mid (really like the look, but they might stand out too much)

Anyone have experience with these or recommendations for something similar? Mainly looking for comfort, breathability, and a relatively lightweight boot that still looks good.


r/WorkBoots • • 2d ago

Boot maintenance Heel savers?

1 Upvotes

Anybody have any luck using them?

I wear out the outside rear of my heel long before the rest of the sole, let alone the boot itself.

I see all kinds from glue on strips of rubber to metal.

I can't have metal, boots must be EH.


r/WorkBoots • • 2d ago

Boots Buying Help Red wing help

1 Upvotes

I tried on a pair of king toes at redwing and they felt great but I have plantar fasciitis and they seem to put weight on my heels and almost instantly got a burning feeling even with my orthotics in. Wondering if they’re are any similar red wing or Irish setter boots like them that don’t do that or are better for pf. I’m between a size 8 and 8.5 and the wides feel loose in the heel but regulars squeeze my toes in most there boots


r/WorkBoots • • 2d ago

Boot Review | Update Liberty vs heritage thorogood

Thumbnail
gallery
23 Upvotes

Just wanted to show folks comparisons I know there is not a lot on the Keens.

12 wides in both. My thorogoods are 3 months old just got the keens today


r/WorkBoots • • 2d ago

Boots Buying Help Best work boots for a shovel

8 Upvotes

r/WorkBoots • • 2d ago

Boots Buying Help ISO perfect work boot for snow

3 Upvotes

Hi! I work at a ski resort which can have me standing in snow covered terrain for up to 6 hours at a stretch. I'm looking for a boot which will keep me warm (with heated socks I already own) and are lightweight because I need to carry them on a chairlift in my avalanche bag to get to my workstation. The ones I use now are good enough, but a little bulky and hurt my back after standing on snow all day. Thanks!


r/WorkBoots • • 3d ago

Generic BOTD

Post image
26 Upvotes

Ariat big rig boa


r/WorkBoots • • 3d ago

Boots Buying Help Work Boot Rec for Landscaper

3 Upvotes

Hey all, wondering if I could get some reasonable priced (~$200) work boots recommendations for my guy. He is a landscaper and doesn’t typically like “super bulky” work boots. Right now he’s been wearing lace up ariat cowboy boots technically, but the traction was trash. He gets pretty muddy some days, hot in the summertime as well.

I was hoping to get them around Black Friday. I was looking at Brunt’s, but they seem kinda bulky and I’ve heard they don’t hold up well. Do any tradesmen have thoughts?

Thanks in advance.