r/buildapc • • 19h ago

Simple Questions - November 17, 2026

1 Upvotes

This thread is for simple questions that don't warrant their own thread (although we strongly suggest checking the sidebar and the wiki before posting!). Please don't post involved questions that are better suited to a [Build Help], [Build Ready] or [Build Complete] post.
Examples of questions suitable for here:

  • Is this RAM compatible with my motherboard?
  • I'm thinking of getting a ≤$300 graphics card. Which one should I get?
  • I'm on a very tight budget and I'm looking for a case ≤$50

Important: Downvotes are strongly discouraged in this thread. Sorting by new is strongly encouraged.

Have a question about the subreddit or otherwise for r/buildapc mods? We welcome your mod mail!

To easily find previous simple questions posts, use this link.


r/buildapc • • 4h ago

Build Upgrade Best 8 gb VRAM GPU I can get for €150 or less (preferably used)?

26 Upvotes

Hi everyone!

I'm looking to upgrade my rx5500xtrx5500xt (4gb VRAM) and I'd like to know what's the best GPU I could get with a budget of €150 maximum.

I'm mainly interested in the second-hand market, and I'm willing to sell my current GPU to help fund the upgrade. So, the €150 budget would be the maximum amount I can spend after selling my current card.

My PC specs:

- CPU: Intel Xeon E5-2680 v4

- GPU: AMD Radeon RX 5500 XT 4GB

- RAM: 16GB DDR4

- Motherboard: Qiyida X99

- Storage: 1TB NVMe SSD

- PSU: 650W

I'm not looking to build a high-end gaming PC, just to get the best possible upgrade for my money.

Thanks!


r/buildapc • • 1h ago

Troubleshooting Energy drink spillage

8 Upvotes

Hi all

I know I'm a complete idiot, but I had an energy drink on the side of my desk and knocked it over and it spilt. My pc is pulled out from half under my desk, so it dropped from the table onto the fan and through.

The second I knocked it over I turned off the pc at the PSU and then unplugged it. I then quickly wiped the liquid off the top, opened it up and wiped off the GPU (using just tissue). I then grabbed my 99% iso and soaked tissue and wiped it quickly. I then removed the GPU and I've sprayed a LOT of iso on the motherboard and GPU. I'm now waiting for it to dry.

I know everyone around spillages says "it was barely any" but I estimate about 30 ml of energy drink spilled inside, and there were maybe 5 droplets on my GPU top, and a drop on the outside of the AIO cooler. It was in fact a full sugar energy drink (I know).

Of course, I'm never going to make this mistake again, and no more liquids anywhere remotely near to my PC. I'm hoping all is good, as there were no screen issues or sounds of any sort.

Does anybody have any advice?

Thank you everyone

(Sorry for any incorrect terms used)


r/buildapc • • 2h ago

Build Upgrade Buying 5060 Ti 16GB or 5070? Worried my i5-10400 will bottleneck

9 Upvotes

So my 2060 Super died (tech confirmed it's dead) and I've been stuck on integrated graphics for a while now lol. I need a new card and I'm stuck between the 5060 Ti 16GB and the 5070.

My setup:
i5-10400
MSI B460 Torpedo (PCIe 3.0 only)
32GB DDR4
1TB SSD
Cooler Master MWE 650W V2
MSI MAG 401QR (3440x1440, 155Hz)

What I'm unsure about:
Is the 5070 actually worth it over the 5060 Ti at 3440x1440, or is my 10400 gonna hold it back so much it won't matter?

I read the 5060 Ti only runs at x8, so it'd be PCIe 3.0 x8 on my board. Is that a big deal or nah?

16GB on the 5060 Ti vs 12GB on the 5070. Does the extra VRAM matter more long term, or is the 5070's extra power the better deal?

I'll probably upgrade the CPU/mobo at some point, just not anytime soon.
Would love to hear what you guys think, thanks!


r/buildapc • • 3h ago

Build Upgrade Looking to upgrade from 9060xt

9 Upvotes

Hey everyone, I currently have an RX 9060xt 16gb that I am looking to move on from, I’m currently looking for a more powerful card that is able to play 1440p with about 70+ fps on mainly Ultra (or high in some cases) settings.

Specs:
•CPU: Ryzen 5 7600x
•RAM: 32gb DDR5 6000 Mhz
•PSU: AsRock Challenger CL-750g 750W 80 Plus Gold

I am also interested messing with Ray Tracing and DLSS which is making me lean into getting an RTX 5070 but with only 12gb vram i’m not sure that’s the right move especially since i want to keep the purchase of a GPU around $800.

Are there any other GPUs that could be a better bargain than the 5070, I would like something with a bit of longevity (Right around 7-8 Years).


r/buildapc • • 8h ago

Discussion Is it safe to handle a chip like this with tweezers?

21 Upvotes

Hi everyone!

I’m a graphic designer creating a flyer for a company in the semiconductor industry. I found this image and was wondering if the way the chip is being handled is technically correct. Is it safe to touch a chip with metal tweezers like this, or could it damage the chip?

Would you consider this image suitable for a professional industry flyer, or should I find a different one?

Thanks for your help!


r/buildapc • • 18h ago

Full Build Req Gaming pc for beginner

117 Upvotes

My 13 year old son wants a gaming pc. I'm clueless. Is it possible to stay in $500-600 range? Maybe a bit more or wishful thinking!Looking for something he can build up over next few years but also is a good starting point. He pays games on steam like monster hunter, and ​Digimon. He tells me all these things to look for but I need something maybe already built because I'm overwhelmed and lost lol. ​storage and speed seem to be important to him idk lol someone help!


r/buildapc • • 6h ago

Troubleshooting PC immediately powers back on after shutdown/sleep in Windows, but works perfectly in Ubuntu. Even fresh Windows 11 fails. Hardware or firmware?

7 Upvotes

Hi everyone,

I've been troubleshooting a very strange PC power-management issue for several days, and I'm hoping someone with experience in motherboard power circuitry, ACPI, or PSU troubleshooting might have some ideas.

The problem started immediately after a technician replaced my GPU and PSU and cleaned the inside of my PC. Everything worked normally before that.

I've tried multiple operating systems, clean Windows installations, different power configurations, and hardware isolation steps without finding the cause.

PC specifications

\- Motherboard: Gigabyte Z590 UD AC, BIOS F6 (2021)

\- CPU: Intel Core i7-11700KF

\- GPU: Gigabyte Radeon RX 9070 Gaming OC 16 GB (previously RTX 3060 Ti)

\- PSU: Enermax Revolution III 850W Gold (previously GameMax)

\- RAM: 32 GB DDR4 3200 MHz (XMP)

\- OS: Windows 11 Home 25H2

\- Storage: 256 GB SATA SSD (original Windows), 512 GB SK hynix NVMe (second Windows installation), 1 TB HDD

The problem

Whenever I shut down Windows, the PC completes the shutdown process normally. The fans stop, all lights go out, and approximately 0.1–1 second later, the PC turns itself back on, without anyone touching anything.

It's not just a Windows restart command. The PC physically powers off momentarily before starting again.

Sleep has the same issue. The PC enters S3 sleep, the fans stop, and it immediately wakes itself up.

Both issues are intermittent. Occasionally the PC shuts down successfully, but most attempts result in it powering itself back on.

I've attached a video showing this behavior.

Troubleshooting already performed

Windows and software tests

\- Normal Windows 11 shutdown — fails

\- "shutdown /s /t 0" — fails

\- Shutdown from Windows login screen — fails

\- Windows Recovery Environment → Turn off your PC — fails

\- Windows 11 installation USB → "wpeutil shutdown" — fails

\- Windows 10 installation USB → "wpeutil shutdown" — fails

\- Completely fresh Windows 11 Home installation on a separate 512 GB NVMe SSD — still fails

\- Disabled hibernation and Fast Startup using "powercfg /h off" — no improvement

\- Removed old NVIDIA drivers using DDU before installing AMD drivers — no improvement

\- Temporarily disabled device wake permissions — no improvement

\- Checked "powercfg /waketimers" and "/requests" — no active wake timers or requests

\- "powercfg /lastwake" generally reports an unknown source or no recorded source

The fresh Windows 11 installation uses a different AMD driver version from my original installation, but reproduces the same issue.

BIOS tests

\- Loaded BIOS Optimized Defaults — no improvement

\- "AC BACK = Always Off"

\- "Resume by Alarm = Disabled"

\- "Power On By Keyboard = Disabled"

\- "Power On By Mouse = Disabled"

\- "Soft-Off by PWR-BTTN = Instant-Off"

\- Temporarily enabled ErP — no improvement

\- Restored ErP to Disabled afterward

I haven't updated the BIOS yet. The board is still on F6 from 2021.

Hardware and peripheral tests

\- Disconnected USB peripherals — still happens

\- Disconnected Ethernet — still happens

\- Temporarily disabled Wi-Fi — still happens

\- Tried HDMI instead of DisplayPort — no improvement

\- Different DisplayPort cables and monitor — no improvement

\- Tried different external PSU power cables — no improvement

\- Bypassed the power strip and connected directly to the wall — initially seemed fixed, but the issue returned

The technician may have removed the front panel while cleaning the intake fans, although I don't know whether the Power-button wiring was touched.

The really strange part: Ubuntu works perfectly

I created an Ubuntu 26.04.1 LTS live USB and booted into Try Ubuntu without installing it.

I performed repeated shutdown and sleep tests.

Ubuntu shutdown: 6/6 successful.

Using:

"sudo systemctl poweroff -i"

The computer shuts down fully and stays off. I even repeated the test without removing the USB stick, and it still shut down successfully.

Ubuntu S3 sleep: 5+ successful attempts.

"cat /sys/power/mem_sleep" reports:

"s2idle \[deep\]"

Using:

"sudo systemctl suspend -i"

The PC enters sleep, remains asleep for over 60 seconds, and resumes normally when I press the Power button.

No unexpected wake-ups or restarts.

This is what I find so confusing: Windows 10 PE, Windows 11 PE, and two separate Windows 11 installations reproduce the problem, while Ubuntu handles both S3 sleep and S5 shutdown correctly.

Windows Event Viewer findings

A detailed event-log investigation showed:

\- Clean Windows shutdowns followed by fresh kernel boots, rather than ordinary software restarts.

\- S3 resumes occurring shortly after sleep entry, mostly with "Wake Source: Unknown".

\- Some Kernel-Power 41 events with Power-button timestamps, although these may be related to manual troubleshooting.

\- At least one Intel Wi-Fi-triggered S3 wake, but the immediate-wake problem also occurs when networking is disabled.

What hasn't been tested

\- Physically disconnecting the case "PWR_SW" connector and substituting the Reset switch.

\- Testing another known-good PSU with its own cables.

\- Inspecting motherboard power-button signaling and standby-power circuitry.

\- Updating the motherboard BIOS.

\- Performing a completely isolated Windows installation with all other drives disconnected.

What I'm trying to figure out

I understand that Windows and Linux can configure ACPI power states, PCIe devices, and wake signals differently.

But what would explain this behavior appearing immediately after a GPU/PSU replacement?

Could Windows be leaving a PCIe wake signal enabled that Ubuntu disables? Could it be a BIOS compatibility problem, an intermittently faulty Power switch, or something involving the PSU's standby power?

Does Ubuntu working reliably make a physical hardware problem less likely, or could a motherboard/PSU fault genuinely affect Windows but not Linux?

Post has been made with ai's help because it can explain better what we have tried so far, the only remaining thing would be a full on reinstall of windows on my C: drive, but given we have already installed it on a separate disk, and it still has this behaviour i am not sure what to do anymore


r/buildapc • • 14h ago

Miscellaneous What can I do with old PC parts?

33 Upvotes

My family has better pc/parts, so they don’t want it.

Working:
- 2080 super
- Samsung 970 evo
- 32gb ddr4 ram

As of now, probably going to throw it away. It’s really dusty so probably unusable since I never put the side panel on after 7 years of use

https://imgur.com/a/MdaqAHY


r/buildapc • • 33m ago

Build Upgrade What’s my best bet for increased gaming storage?

2 Upvotes

I’m in need of more storage for my gaming PC, preferably 2 TB. With prices as they are, I’m not trying to blow anything out of the water, I’m just preparing for an eventual GTA6 release without needing to deep dive into specs again. Built in 2020, specs below. I’m also going to include the prices from 2020 so that we can remember better times. Thanks!

ASUS ROG STRIX RX5700XT- $448.35
AMD Ryzen 7 3700X- $299.99
Samsung E 1 TB 970EVO NVME M.2 SSD- $129.99
G Skill 16 GB DDR4 3200- $63.08
ASUS ROG STRIX B550-F- $189.99


r/buildapc • • 38m ago

Build Upgrade I aren't experienced in buiding pc's and I am looking for advice :)

2 Upvotes

I bought a 1440p screen and I am wondering about upgrading my gpu. I had my pc prebuild in 2022 and this are its specs:

motherboard: ASUS PRIME H610M-K D4 Rev 1.xx

Cpu: 12th Gen Intel(R) Core(TM) i5-12400F 2.50 GHz

RAM: 32,0 GB ddr4

GPU: NVIDIA GeForce RTX 3060 (12 GB)

PSU: Vero L3 Bronze 700W

Im looking for a card for $750 max. I found RX 9060 XT 16GB and it looks good to me. I don't know if it is a good idea tho and if there are better options in this price range. thanks!


r/buildapc • • 6h ago

Build Help I have few questions about my build

4 Upvotes

My pcparts link: https://pcpartpicker.com/list/3vNyLy

1- are the parts Compatibil,

2 - is it worth it,

3 - will it be able to play gta 6 at 30+ fps/ better then a console?


r/buildapc • • 10h ago

Build Help Prebuilt Vs Building i

7 Upvotes

Hello everyone, I am trying to buy my first PC with a calm budget around 3-3500$. I was shaded over to getting a 5070ti with a AMD Ryzen 7 9800X3D. But with prices and everything i was wondering which would be the best route go to buy this PC. Either buying a prebuilt or ordering all the necessary parts and building it.
But if i was too buy all the necessary parts myself where would I purchase them from. I’ve seen people saying to buy used parts. Is this the best option?
Thank you.


r/buildapc • • 5h ago

Build Upgrade Help needed with upgrade

3 Upvotes

I am planning to upgrade my son’s PC this Christmas but unfortunately I cannot afford an entirely new build. Spent time trying to decide what components to keep or upgrade and I’m confused now with a headache…he mostly plays games and sometimes will make videos

I’ve looked at buying a motherboard cpu combo, used and new. Thought about upgrading the GPU but I’m not sure if the current CPU will restrict it. I’m fine buying used, if something 2-3 years old will actually make a noticeable difference.

Currently his PC has;

ASRock B550AM motherboard, from a CyberPowerPC prebuilt. So it has their branded BIOS

Ryzen 7 3700X CPU

Radeon RX 5700 GPU (last year I bought him a Radeon RX 7900XT as an upgrade but I did not realize how problematic that card was. After the millionth problem and firmware update (ran the list of old firmware to see if anything worked, it did not), we just went back to the 5700 and it’s been running fine

32g or DDR4 RAM

Corsair SF1000L PSU (bought when we got the 7900XT and only recently swapped out the RM850X because I needed to replace the stock cables with longer ones)

Always appreciate you guys taking a look and giving any suggestions or ideas


r/buildapc • • 16m ago

Build Help help build first pc

1 Upvotes

can anyone help me pick out the parts for my first pc that can run games like Fortnite, cs2, roblox, cod. ETC i don’t really care abt the looks i just need help with the parts i have a $1400 budget, all parts must be on amazon or newegg


r/buildapc • • 17m ago

Troubleshooting Putting my old SSD from my dead laptop into my new PC and installing windows on it ?

1 Upvotes

Following the death of my gaming laptop, i am in the process of building a PC. I have ordered the various parts and will proceed with the build this weekend.

To save some money that could be reinvested in other components (god those prices), i did not buy an SSD. The hard drive on my laptop died last year and i replaced it then with a 1To Kingston NV3 - meaning it's a recent part that i can reuse for the new PC.

My only question is, how does Windows updating/installation works in that context ? I plan on using a bootable USB key, but it will not be a standard installation on an "empty" drive - the SSD already has the system and files from my previous laptop, including Windows and pilots for the laptop.

Can i just plug the boot key into the new PC, ask it to install (or update ?) Windows on the SSD and change every pilot so that it matches the new hardware ? Or should i first wipe the SSD so that Windows can be installed from scratch ?

To be clear, i don't care too much about the files that are on the SSD, it's just movies and games i can redownload. Not having to do it would save me some time, but my priority is to have a functioning PC without any bugs.

Thanks in advance for any tips you may have !


r/buildapc • • 44m ago

Discussion 9060XT Asus dual or pulse?

1 Upvotes

The Saaphire is 10 usd more is it worth it or should i go with the cheapest


r/buildapc • • 44m ago

Discussion Need some recommendations for an affordable but good pc

0 Upvotes

I’m nowhere near close to starting, so I’m kind of just looking for what my budget may produce gaming wise. All I really care about is the case and what goes in it, not the monitor or any external stuff. I’m looking for something to be able to run anything smoothly for around 2k or under. If that isn’t doable just let me know what is possible with that price range in America.


r/buildapc • • 45m ago

Troubleshooting Built a PC, no display and DRAM light behaving strangely

0 Upvotes

I’m stumped with this. I’ll share the parts I’m using and then what’s happening, my attempts to fix and what that has done.

MoBo: ASUS Prime B860-Plus WiFi
CPU: Intel Core Ultra 7 270k Plus
CPU Cooler : Thermalright Peerless Assassin 120 SE ARGB White V3
RAM: KLEVV FIT V 32GB (2x16) 6000MHz C28 DDR 5 (KD5AGU880-60B280F)

Other parts (if relevant):
PSU: be quiet! System Power 11 650W
SSD: Kingston NV3 1TB M.2 NVMe PCIe 4.0

So, finished putting everything together and plugging all the cables in from the PSU, plugged everything into the MoBo where it’s supposed to be, and I got no display

Upon checking the post LEDs when the PC tries to boot, something strange was happening, the CPU light cycled fine, the DRAM light came on for approximately 20 seconds, went off, and the boot did not continue past that stage

I opened it back up and removed the graphics card from the equation just in case, no change.

I tried removing and reinserting the RAM, no change, LED behaviour when I do this (feature for this mobo that also uses it to show if the RAM is plugged in OK and detected independently of the boot post by going on once the board is powered and off once you put the RAM in) seems to suggest it’s plugged in correctly and detected OK

I tried using a single stick of RAM in the socket instructed by the mobo manual, no change.

I unplugged and replugged in the power supply cables for the 24 pin socket and 8 pin CPU socket, no change

I moved the CPU cooler fans from the cpu_opt header to the cpu_fan header (something someone suggested some motherboards freak out if nothing is connected to that specific header), no change.

I removed the CPU cooler, took out the CPU, put it back in, this caused a change! But a confusing one.

Now, instead of the DRAM light coming on for approximately 20 seconds and going off with the boot stopping there, the DRAM light now stays on when I try to boot with the boot process still seemingly going no further and still providing no display

After reinstalling the CPU cooler (slightly less tight this time as I read that can cause issues) this was still the case

I tried leaving it booting for well over 20 mins in case the RAM was now training, no change

I tried fiddling around with the RAM again, trying each stick one at a time in each socket the MoBo manual says to use when using 1 or 2 sticks, the result of this was more confusing.

When either of the sticks was installed in B2 with no other sticks in, which is the second slot to be used according to the manual, there was no change, the DRAM light continued to stay on when attempting to boot, I again left this for a while to allow for training, but it stayed on.

However, when either of the sticks was installed in A2 with no other sticks in, which is the first slot to be used according to the manual, the DRAM light returned to its original behaviour of coming on for approx 20 seconds when attempting to boot, going off, and the boot process appearing to stop there.

I’ve quadruple checked that both the CPU and RAM are compatible with the MoBo out the box and do not require a BIOS update.

The ASUS manual does not give details on what the differing behaviours of the light mean, I’ve searched around the internet and have run out of things to try.

I don’t have other RAM or another CPU to try.

This PC is for a friend who doesn’t live locally, so I only have until Saturday to get it completely working and set up.

Any help would be massively appreciated!

Thanks in advance!


r/buildapc • • 55m ago

Miscellaneous Help me find a replacement for my InWin 303!

0 Upvotes

I've had my InWin 303 since 2016, it's seen my GT710, GTX960, RTX2070 and currently my RTX 4090. My CPU is a 9800x3D paired with a decent air cooler, and my case throughout the years has never really seen more than one case fan (single 120mm at the back).

Summer is coming up and while I've had my current GPU for almost 3 years now, I don't want to put it through more hell. When it's stressed, the CPU and GPU get to about 80 degrees C and the fans are always loud no matter the load. The InWin 303 was considered horrible in 2016 for air flow so this is to be expected.

My replacement case needs to be large enough to accommodate a 4090 in width as a baseline. I like the look of the Fractal North XL Momentum Edition and the HAVN BF 360 Flow as they are boxy with a tinted side panel (and include fans!!!).

I've always liked boxy cases like the NZXT H511 and really dislike fishbowl cases or cases which look too gamer/rounded (the Fractal Summit is too rounded for my liking - yes I know).

So TL:DR, a classy, boxy design with as large of a glass side panel as possible, similar in looks to the Fractal North XL Momentum Edition and the HAVN BF 360 Flow

Thanks :p


r/buildapc • • 59m ago

Build Upgrade I’m at a crossroads with my PC upgrade and need some advice

1 Upvotes

Current Specs:

  • GPU: RTX 3060
  • CPU: Ryzen 5 3600
  • RAM: 16GB (2x8GB) DDR4 3200MHz CL16
  • 1440p Monitor

I’m planning to upgrade my GPU to a Radeon RX 9070 XT (€870 / $954). Using that as my baseline, I have two main options for the rest of the build:

Option 1: Jump to AM5

  • CPU: Ryzen 5 9600X (€160 / $175)
  • RAM: 16GB (2x8GB) DDR5 5600MHz CL40 (€280 / $307)
  • Motherboard: Gigabyte B650 MAX(€123 / $135)
  • Total (including GPU): €1,433 / $1,571

Option 2: Stay on AM4

  • Keep my current motherboard and RAM, and just drop in a Ryzen 7 5800X3D (€348 / $381).
  • Total (including GPU): €1,218 / $1,337

My dilemma: for a €200 difference, I would gladly make the jump to AM5 for future-proofing. However, after doing some research, I realized that 5600MHz CL40 RAM is pretty slow and far from ideal, especially when paired with a non X3D CPU like the 9600X.

I also considered getting a 7800X3D (AM5) instead, which goes for around €300 on Amazon, or ~€250 on AliExpress, though I’m not sure if I trust buying a CPU from AliExpress.

What would you do in my shoes? Is the AM5 route still worth it with that RAM, should I stick to the 5800X3D, or do you have better component suggestions around this budget? Thanks in advance!


r/buildapc • • 4h ago

Build Help Unsure what GPU to get for 1080p

2 Upvotes

My CPU is a 98003XD

Mainly interested in comp/esport games

Im happy playing on 1080p and would like some good suggestions for GPU that isn’t a complete ripoff in today’s market.

My budget is around £500 but i could go higher if need be.

Purchasing in the UK


r/buildapc • • 1h ago

Build Upgrade can’t decide between dark power 14 or HX1200i

0 Upvotes

so im planning on upgrading my gpu and need a new power supply to handle the new setup. but I can’t decide between a be quiet dark power 14 or a Corsair hx1200i. is there any significant differences i should consider besides price? if there’s a equal or better option for a similar price you could also suggest those too but im mostly looking for advice on the two mentioned.


r/buildapc • • 1h ago

Discussion Building a pc help me with parts

0 Upvotes

So i planning on getting a pc for christmas or new years and i dont really know much
I mainly want to play cyberpunk,hogwarts legacy,heavily modded minecraft,and the basic like roblox,fortnite
I dont know what specs to buy or to buy a premade one
I dont really care about about looks,I just want maximum fps since im not planning on upgrading it for at least 3-4 years
My budget is around 1000 euros,can exceed by a maximum of 200 if needed
Im in france ,i dont mind components from europe but from the us its pretty tough because of the taxes