r/sffpc • u/SupremeLeaderMat • 4h ago
Build/Battlestation Pics My oncall companion
Not the best setup but it gets the job done
r/sffpc • u/SupremeLeaderMat • 4h ago
Not the best setup but it gets the job done
r/sffpc • u/Puffdotbusiness • 6h ago
CPU: AMD Ryzen 9800X3D
GPU: RTX Pro 5000 Blackwell 72GB
Motherboard: ASRock Rack AM5D4ID-2T/BCM Deep mini-ITX
Ram: 32GB Gskill Royals @ 6000c26
SSD: Sabrent Rocket 1TB
PSU: Corsair SF850 w/ zcooi cables
Cooler: Thermalright AXP100 Full Copper w/ noctua fan
Case: FormD T1 reference V2.0 - TG side panel
Currently running qwen 3.8 27B q8 for local inference. Also using this for gaming - roughly 5080 performance. Runs cool and quiet.
New 67mm king for am5 cpus,
I use it w 9700x and nf a12x25 g2 chrmx.
Short term it can dissapate up to 150w from 8 cores, in cb26 w side panel on it averages on 135w.
In games (uv -24, 5.5 Ghz all core, 1.27 Vsoc) it handles 9700x 65-70% on 105-110w and 80-83c.
Bcs of fin stack density it cools ram not so well, up to like 70-100% of fan. If you have lp and thin aluminium ram like me, you better be getting 25mm good fan.
In comparison w is-67xt it handles +10w avg all cores and 7-12 degrees lower in helldivers 2.
Also it handles instant heat much much better than is-67xt.
(Is-67xt was also used with nf a12x25 g2 chrmx)
r/sffpc • u/Due_Art_3452 • 5h ago
My Specification
Cpu: Ryzen 7 3700x
Gpu: Msi Rtx 5060 8gb
Ram: Fury 32gb
Mobo: Asrock 550m itx/ac
M. 2: Wd Black Sn850x
Psu: Lian Li 850w
r/sffpc • u/ProgUn1corn • 3h ago
Hi, recently I've built my own SFF. It's SSUPD Meshroom D, 15L case.
The build was considered transporting in the first place, due to I have to move between countries several times a year and my laptop died. So here's how it went:
CPU: Ryzen 7 9700x
Cooler: Thermalright SS110 (for a really light weight of 500g and small dimension for less twisting torque)
RAM: Lexar 48gb 6000MT/s CL30
MB: MSI MPG X870i edge Ti WiFi
GPU: Asus Prime RTX5070Ti OC (for less thickness and weight)
PSU: Deepcool PS850P
It worked great, and it wasn't that heavy at all. It's my time for transportation, I've added a metal GPU bracket to (not very tightly) clamp the GPU from the other side, stuffed foam under and around GPU to make it as stable as possible. I also stuffed foam all around my luggage case and stuffed some clothes as well. The whole luggage case is only for the Meshroom D basically, and the PC is definitely not moving afaik when dragging the luggage case inside my house.
Now, I'm trying to carry this luggage on the plane, I'll handle this luggage as carefully as I could, and I'll 100% not check in due to some horrible movements I've seen. However, I've saw people claiming that you should always take out your GPU and CPU cooler or it will definitely gonna fail. Like they say your PCIE is gonna break, your MB will be twisted, your CPU could get removed from the socket together with the cooler, like that.
Should I really take my GPU off in this case? It would be a hassle to do this and actually defeats the purpose of ITX. But, I don't really want to risk my GPU especially considering the price nowadays. What should I do?
r/sffpc • u/Mysterious-Can5184 • 3h ago
Hi everyone,
I recently bought a Thorzone Nanoq S (which is supposed to ship today!) to downsize from a Lian Li B4. Because of my ASUS Prime RX 9070 XT and its three 8-pin PCIe connectors, I'm planning to make my own custom PSU cables to avoid a nightmare with cable management.
Based on the Thorzone Nanoq S custom cable manual (https://thor-zone.com/mini-itx/nanoq/), I put together a parts list from ModDIY for my Corsair SF850 (2024). I'd love to get your feedback or recommendations before ordering (every connector comes with his pins):
Motherboard cable:
CPU Cable:
GPU cable:
With:
A quick question regarding the wire: Has anyone used ModDIY's 16 AWG soft silicone wire with Corsair Type-5 (Micro-Fit 3.0) connectors? Since Micro-Fit housings are pretty tight, I want to make sure the outer diameter of the 16 AWG silicone insulation isn't too thick to fit properly into the PSU-side connectors, or if I should step down to 17/18 AWG instead.
Does everything look accurate and compatible, especially regarding the Type-5 pinouts and terminals? Thanks in advance!
Fully 3d-printed 4TF extra-long. I used NFC Josh’s MkIII, and added another 10mm of chassis and panel stretch with splices in the slicer. I added mesh sections as well to let pieces breathe better. I also used the motherboard tray from the 3DLP chassis and cut it to size in the slicer - that’s the lime peeking out to the left of the SO-DIMMs. This allowed me to run two Arctic P9 Max fans as front intakes, which produce an insane amount of static pressure if full load is needed. CPU intake is a Gen 1 Arctic BioniX. Yes, I know the lime is gaudy. Yes, I’m aware it’s not everyone’s cup of tea. Yes, Snorlax is the best Pokemon. The lime is almost a perfect match for Corsair yellow though, so it’s a nice little color pop.
Build as set up:
- Minisforum 790i 7945HX3D, -25 all-core undervolt, boost +150 core
- 64GB Crucial SODIMM, OC to 6000. CL is still dog water at 46, but the best available is 40 at lower frequency mhz.
- Vastarmor 9060XTLP at time of photos, thanks to a friend loaning it. -100mv, +150 core boost, +2850 memory, no change to board power limit. It’s replaced with a monster of a binned 5060LP that runs like a scalded dog.
- Enhance 8345 450W Platinum PSU
- 2x 2TB Predator GM7000 NVME SSDs
r/sffpc • u/little_sh0 • 1h ago
My only two requirements is that it has to have pretty good airflow and is compact but not restrictingly compact like the formdark t1 I love the case, but it's almost a little too small
r/sffpc • u/Tunafishsalad23 • 1d ago
Hi everyone,
I have a Cooj sf3 with the 9800 X 3D, rtx 5080 SFF, corsair 1000, Asus rog strix b850i motherboard
Having trouble with my cooling as I use the ID cooling 55 and it don't think it's enough for that CPU regularly getting into 90°' and I'm thinking about going to liquid cooling or just wondering which case you guys think? I want something small like the Cooj sf5 or the Nanoq S, I see these have 240mm AIO but also looking at the Anyitx unibody which is 15 liters and a 280mm AIO. Also is there any feedback on Nanoq S case with 240mm AIO? How is the case and cooler?
Any other cases with AIO either 240 or 280mm?
Cheers
r/sffpc • u/errr_mah_gawsh • 1d ago
Hello everyone. I’ve been working on a riserless mini-ITX case, and my V1 of Vectorcase-E is finally done. A compact, high-airflow 5.36L (104 × 206 × 250 mm) Mini-ITX enclosure. If y'all want to print your own, feel free to grab the files from Makerworld linked below. They're completely free. If you have questions, I'll do my best to answer them here.
I always wanted to create my own case around my HDPLEX 250w PSU because I hated the whine and fan sounds that tend to accompany flex PSUs. I also didn't want to use a riser cable and wanted a larger CPU cooler to reduce overall noise. After undervolting and testing, noise and wattage came out to around 47 decibels and ~180 total watts during Cinebench 2026.
3D Print Files and Bill of Materials
Preview Custom Colorways in 3D
Build & Overview Videos (coming soon): https://www.youtube.com/@vectorcaselabs
Again, the print files are completely free and were printed in PETG and PLA.
Hi everyone, I’m troubleshooting my first Mini-ITX build and could use some help.
CPU
Ryzen 7 9700X
Motherboard
ASRock B850I Lightning WiFi, BIOS 4.10
GPU
ASRock RX 9070 Challenger 16GB
RAM
Single 16GB T-Force Vulcan DDR5-6000, currently running at default 4800
CPU Cooler
Thermalright AXP90-X53 FULL Copper
PSU
Corsair 750W
Case
S300 with PCIe 3.0 riser
SSD
Samsung 980 PRO 2TB
Monitor
LG 27GL650F-B, connected via HDMI
Problem I'm having is that with the GPU connected through the riser and powered, I get a black screen—no logo or BIOS—from the GPU’s HDMI output.
What I’ve checked:
Disconnecting the GPU/riser from the motherboard lets me boot into BIOS using the motherboard HDMI and CPU’s integrated graphics.
I have changed this setting - >
Advanced → AMD PBS → AMD Common Platform Module → PCIe x16 Link Speed → Gen3.
Reconnected gpu with the mobo through the stock riser, still got the black screen after pcie Gen change.
Reseated the riser at the motherboard and the GPU in the riser. The GPU appears fully seated.
Does this sound like a faulty riser, or is there another BIOS setting or troubleshooting step I should check first? Would trying Gen2 help narrow it down before dismantling the build?
r/sffpc • u/Outrageous-Money2164 • 1d ago
Hey everyone! Has anyone built a system in the BRAVEMAN ZZAW D3 case? (Note: you can search for it on AliExpress, I didn't include the link so the spam filter doesn't delete this post).
I really like the look of this case and already have all the hardware for a Mini-ITX build. Right now, my PC is in a Thermaltake TR100 with a Sapphire Pure RX 9070 XT. It’s a pretty chunky GPU, so it obviously won’t fit into just any ITX case.
Looking at the specs for the ZZAW D3, the GPU width exceeds the case's stated limit by about 1.5mm. How critical is this in real life? Is there usually enough wiggle room to close the side panel, or is it a hard no? I tried asking AI, and it basically told me it's a 50/50 gamble, so I’m hoping someone with hands-on experience with this case can chime in.
Thanks in advance for any help or advice!
r/sffpc • u/antiqtech • 17h ago
r/sffpc • u/medic808s • 13h ago
Go ahead and give any honest thoughts. I’d appreciate feedback now so I don’t regret anything in the future.
r/sffpc • u/rafael6554 • 14h ago
Just did a build in the M2, but while gaming I ran HWINFO & saw my chipset hits 73c & the ssd hits 68-70c. Also, my ram hits temps of 58-60c. How are you guys managing to cool the ram? I had trefi at 65535 thought that might be the issue & swapped it back to 32767 temp lost -1c. Any tips on how I can possibly have a ram fan in there?
For reference, I have an Astral 5080 in the build.
Or am I overthinking these temps for normal gaming use. Thanks!
r/sffpc • u/monkeywright • 22h ago
I know there are variations of this thread on here, but I'm trying to get a solid answer on something.
I am planning to use the axp90x47 with a regular Noctua 92mm on a 9800x3D build. I know this doesn't necessarily improve temps but can improve acoustics.
I have also seen people who make a 120mm fan adapter duct (not just a flush mount, but a duct to better force air through the cooler). I think with my parts, I can squeeze in a 2 or 3mm tall duct
Has anyone tried this solution? If no improvement in temps, is there an even better reduction in noise? I'm aiming for silent during day to day tasks and no jet engines during gaming.

r/sffpc • u/girthyclock • 1d ago
I see that a lot of you use 3D printers, but my understanding is that those are mostly printing in PLA / PETG. What about those of you that use metal in your builds? Can you actually 3D print metal parts? Which printers are you using? And is the upfront cost of the equipment worth it?
r/sffpc • u/MajorFuckingDick • 1d ago
r/sffpc • u/4urora_c • 2d ago
Hi all, it’s been a minute but I think some of you may remember my T1 build I posted several months ago. Ever since then there were many aspects of the build I was dissatisfied with and thought could be improved, which led me to design my own case from scratch, bypassing all the case-inherent issues that couldn’t be fixed simply with a few mods.
The case is the Project:Celeste which sits at 10.4L (230x135x335). Its construction consists entirely from machined anodised aluminium 6061 which has allowed for the elimination of most visible screwholes for a clean exterior aesthetic. Many other parts were also designed and fabricated specifically for this build, including the custom back-connect monoblock with black nickel-plated internals, replacement NVME/VRM heatsinks, cable channels, and distro plate.
One standout feature of the case is the ability to shift the spine to a mere 28mm of cooler clearance which provides for a massive maximum GPU chamber thickness of 85mm- this provided enough space to fit an Aquacomputer Ampinel for per-pin monitoring and load balancing, which would prove impossible in most other SFF cases that utilise a sandwich layout.
In addition, I’ve also installed various other supplements including a Highflow NEXT for flow, coolant temperature, and conductivity measurements, as well as the fans and DDCZero pump being controlled via a Quadro integrated into the front panel. Despite that, coolant temperatures are monitored in 2 other locations which provides a comprehensive understanding of how the loop, and there’s a separate thermistor probe measuring the ambient room temperature. There’s also an inline mesh filter to keep any radiator debris or otherwise from the blocks and ensure coolant quality. A hot-swappable NVME adapter (via USB4) also sits behind the storage which makes up for only having 2 NVME slots on this motherboard. Another massive QOL improvement I implemented was a radiator quick-mount system which eliminated most of the hand cramps putting everything together using extendable fittings to mount and seal the radiator directly to the distro plate. The rear panel also includes QDT4s for integration with an external MO-RA and a 4-pin XLR that can provide power to external 5v/12v devices (fans, rgb, etc). Of course, the system is fully featured with an internal DDCZero and 240 radiator which means it will run entirely independently in a pinch, as should be standard of these builds.
All in all, I’m quite satisfied with the case design and how the build turned out. I’ll include some more images in the comments showing parts of the the internals so feel free to let me know what you think or what could be worked on (:
CPU: R9 9950X3D2
GPU: MSI 5090 Gaming Trio
RAM: 2x32 6200 CL36
Motherboard: STRIX X870I
Storage: 2x SN7100 2TB, 1x NV7000-T 4TB
PSU: Corsair SF1000
Case: Project:Celeste
r/sffpc • u/DommeThrall • 18h ago
I'm planning a refresh in my A4-SFX and considering a 92mm AIO for the 9800X3D instead of the usual air cooler. Main goal is lower noise under sustained loads without losing too much cooling headroom.
I’ve seen a few people run similar setups but not many long-term reports on pump noise or VRM temps in this specific case. If you’ve tried it, how did the acoustics and thermals turn out compared to a good air cooler like the Noctua NH-L12 or AXP90? Any particular AIO you’d recommend or avoid?
Hi!
I’m planning to move my PC from an ATX case to something smaller in the near future. I’ve had my eye on the Jonsbo Z20 for quite some time now - the version with the glass side panel.
My main concern is aesthetics. I’m not sure which color scheme to go for. My current components are:
- Silver and white motherboard
- White RX 9070 Sapphire Pure GPU
- Black Arctic CPU air cooler
- Black RAM
I’m also planning to get a Corsair SF1000 PSU. Unfortunately, it’s only available in black where I live, but I found white replacement cables on Corsair’s website.
I’m wondering whether these components would look good in a black case and whether it’s worth trying to achieve a mostly white interior (with white PSU cables, white case fans and a white CPU cooler/AIO), or if I should simply stick with black for the remaining components and let the existing white ones serve as accents.
I’d like to see your builds and hear about your experiences. Any inspiration would be greatly appreciated!
r/sffpc • u/tgtassap • 2d ago
This one is based on the Asus CR1100FKA. Has a Celeron N4500 with passive cooling, 4gb ram, 64gb eMMC. Both were 10EUR on Vinted with broken screens. I added some scrap heatsink to both, kinda ghetto mounting, but best i could do... Works laying flat or standing on its feet. I only kept the mainboard, so less ports, but if needed, one could always use a usb-c hub. It has Wifi built in. Custom designed case, one was printed with A1 mini, so had to split into two parts, but the other is a single unit printed with Kobra S1. Small footprint, only 191x125x26mm.
r/sffpc • u/welp_im_damned • 1d ago
r/sffpc • u/Mint_Ramen • 21h ago
Can you guys suggest a great SFF case for me?
the CPU and GPU components that I have right now and want to build the SFF around are:
Intel i9 12900k and
Gigabyte 6750xt OC (281 mm in length)
I need a case that has a low footprint like the KXRORS S300 but I know that having a low profile CPU cooler wont be good enough for the 12900k.
need help on this. But i really do love the S300 or at least at the same size but can fit a better cooler for the CPU..
I also need something in the budget friendly side like below $100 if that is possible.
thank you in advance.
r/sffpc • u/MykhailoKhmaruk • 1d ago
The build is 4 months old - the parts were bought earlier, though I reversed the airflow direction just this week.
By the way, if you have front intake, don't install a top fan, as the cool air will just bypass the CPU cooler.
9900X + 9070XT + 32GB (Because I decided to save some money for now :( (або ...to cheap out a bit for now🫠)
By